From: <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org,
fabio.estevam-3arQi8VN3Tc@public.gmane.org,
Valentin Raevsky
<valentin-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>,
Christopher Spinrath
<christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
Subject: [PATCH v3 1/2] ARM: dts: imx6q-cm-fx6: fix the operation points
Date: Mon, 13 Jun 2016 01:24:55 +0200 [thread overview]
Message-ID: <e24c7d64dbce490fbeaa0f44b56027d0@rwthex-s1-b.rwth-ad.de> (raw)
From: Valentin Raevsky <valentin-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
The current ldo settings of the cm-fx6 do not allow 1.2GHz cpu
frequency. At this frequency the module behaves unstable.
But the imx6q fuse indicates that 1.2GHz operation is possible.
Hence, remove the 1.2GHz operation point in the device tree.
Signed-off-by: Valentin Raevsky <valentin-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
[christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org: enhance commit message, adjust
remaining operation points to match the ones in imx6q.dtsi and add
a comment in the device tree]
Signed-off-by: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
Reviewed-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
---
Notes:
Changes since v2:
- fix comment style
- add Fabio's Reviewed-By
Changes since v1:
- Enhance commit message to explain that we cannot rely on the imx6q
fuse to restrict the frequency
- put the same information into a comment in the device tree
- fix the remaining operation points to match the ones given in
imx6q.dtsi
arch/arm/boot/dts/imx6q-cm-fx6.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index 6d8d5e9..b5de7e6 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -91,6 +91,28 @@
};
};
+&cpu0 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
&ecspi1 {
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
--
2.8.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-06-12 23:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-12 23:24 christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg [this message]
[not found] ` <e24c7d64dbce490fbeaa0f44b56027d0-gtPewvpZjL8umhiu9RXYRl5UTUQ924AY@public.gmane.org>
2016-06-16 1:35 ` [PATCH v3 1/2] ARM: dts: imx6q-cm-fx6: fix the operation points Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e24c7d64dbce490fbeaa0f44b56027d0@rwthex-s1-b.rwth-ad.de \
--to=christopher.spinrath-va1bhqpz9fbzxben9dutxg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=valentin-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).