Hi Stephen, thanks for the follow-up.

On Mon, 2019-11-18 at 22:14 -0800, Stephen Brennan wrote:
> BCM2711 features a RNG200 hardware random number generator block, which is
> different from the BCM283x from which it inherits. Move the rng block from
> BCM283x into a separate common file, and update the rng declaration of
> BCM2711.
> 
> Signed-off-by: Stephen Brennan <stephen@brennan.io>
> ---

It's petty in this case but you should add a list of changes here too.

>  arch/arm/boot/dts/bcm2711.dtsi        |  6 +++---
>  arch/arm/boot/dts/bcm2835.dtsi        |  1 +
>  arch/arm/boot/dts/bcm2836.dtsi        |  1 +
>  arch/arm/boot/dts/bcm2837.dtsi        |  1 +
>  arch/arm/boot/dts/bcm283x-common.dtsi | 11 +++++++++++
>  arch/arm/boot/dts/bcm283x.dtsi        |  6 ------
>  6 files changed, 17 insertions(+), 9 deletions(-)
>  create mode 100644 arch/arm/boot/dts/bcm283x-common.dtsi
> 
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index ac83dac2e6ba..4975567e948e 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -92,10 +92,10 @@ pm: watchdog@7e100000 {
>  		};
>  
>  		rng@7e104000 {
> +			compatible = "brcm,bcm2711-rng200";
> +			reg = <0x7e104000 0x28>;
>  			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> -
> -			/* RNG is incompatible with brcm,bcm2835-rng */
> -			status = "disabled";
> +			status = "okay";
>  		};
>  
>  		uart2: serial@7e201400 {
> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
> index 53bf4579cc22..f7b2f46e307d 100644
> --- a/arch/arm/boot/dts/bcm2835.dtsi
> +++ b/arch/arm/boot/dts/bcm2835.dtsi
> @@ -1,5 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0
>  #include "bcm283x.dtsi"
> +#include "bcm283x-common.dtsi"
>  #include "bcm2835-common.dtsi"
>  
>  / {
> diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
> index 82d6c4662ae4..a85374195796 100644
> --- a/arch/arm/boot/dts/bcm2836.dtsi
> +++ b/arch/arm/boot/dts/bcm2836.dtsi
> @@ -1,5 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0
>  #include "bcm283x.dtsi"
> +#include "bcm283x-common.dtsi"
>  #include "bcm2835-common.dtsi"
>  
>  / {
> diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
> index 9e95fee78e19..045d78ffea08 100644
> --- a/arch/arm/boot/dts/bcm2837.dtsi
> +++ b/arch/arm/boot/dts/bcm2837.dtsi
> @@ -1,4 +1,5 @@
>  #include "bcm283x.dtsi"
> +#include "bcm283x-common.dtsi"
>  #include "bcm2835-common.dtsi"
>  
>  / {
> diff --git a/arch/arm/boot/dts/bcm283x-common.dtsi
> b/arch/arm/boot/dts/bcm283x-common.dtsi
> new file mode 100644
> index 000000000000..3c8834bee390
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm283x-common.dtsi
> @@ -0,0 +1,11 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/ {
> +	soc {
> +		rng@7e104000 {
> +			compatible = "brcm,bcm2835-rng";
> +			reg = <0x7e104000 0x10>;
> +			interrupts = <2 29>;
> +		};
> +	};
> +};

I think Stefan wrote bcm283x-common.dtsi by mistake, he really meant
bcm2835-common.dtsi.

See bcm2835-common.dtsi's header comment:

/* This include file covers the common peripherals and configuration between
 * bcm2835, bcm2836 and bcm2837 implementations.
 */

Regards,
Nicolas