linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Young <dyoung@redhat.com>
To: Chen Zhou <chenzhou10@huawei.com>
Cc: catalin.marinas@arm.com, will@kernel.org, james.morse@arm.com,
	tglx@linutronix.de, mingo@redhat.com, bhe@redhat.com,
	corbet@lwn.net, John.P.donnelly@oracle.com,
	prabhakar.pkin@gmail.com, bhsharma@redhat.com,
	wangkefeng.wang@huawei.com, arnd@arndb.de,
	linux-doc@vger.kernel.org, xiexiuqi@huawei.com,
	kexec@lists.infradead.org, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, horms@verge.net.au, nsaenzjulienne@suse.de,
	huawei.libin@huawei.com, guohanjun@huawei.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v11 0/5] support reserving crashkernel above 4G on arm64 kdump
Date: Thu, 6 Aug 2020 19:37:50 +0800	[thread overview]
Message-ID: <20200806113750.GB2492@dhcp-128-65.nay.redhat.com> (raw)
In-Reply-To: <20200801130856.86625-1-chenzhou10@huawei.com>

Hi Chen,

Thanks for the update. I was busy on other things, I will review your x86/common changes
this weekend or early next week.

On 08/01/20 at 09:08pm, Chen Zhou wrote:
> There are following issues in arm64 kdump:
> 1. We use crashkernel=X to reserve crashkernel below 4G, which
> will fail when there is no enough low memory.
> 2. If reserving crashkernel above 4G, in this case, crash dump
> kernel will boot failure because there is no low memory available
> for allocation.
> 3. Since commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32"),
> if the memory reserved for crash dump kernel falled in ZONE_DMA32,
> the devices in crash dump kernel need to use ZONE_DMA will alloc
> fail.
> 
> To solve these issues, change the behavior of crashkernel=X.
> crashkernel=X tries low allocation in ZONE_DMA, and fall back to
> high allocation if it fails.
> 
> If requized size X is too large and leads to very little free memory
> in ZONE_DMA after low allocation, the system may not work normally.
> So add a threshold and go for high allocation directly if the required
> size is too large. The value of threshold is set as the half of
> the low memory.
> 
> If crash_base is outside ZONE_DMA, try to allocate at least 256M in
> ZONE_DMA automatically. "crashkernel=Y,low" can be used to allocate
> specified size low memory.
> For non-RPi4 platforms, change ZONE_DMA memtioned above to ZONE_DMA32.
> 
> When reserving crashkernel in high memory, some low memory is reserved
> for crash dump kernel devices. So there may be two regions reserved for
> crash dump kernel, one is below 4G, the other is above 4G.
> In order to distinct from the high region and make no effect to the use
> of existing kexec-tools, rename the low region as "Crash kernel (low)",
> and pass the low region by reusing DT property
> "linux,usable-memory-range". We made the low memory region as the last
> range of "linux,usable-memory-range" to keep compatibility with existing
> user-space and older kdump kernels.
> 
> Besides, we need to modify kexec-tools:
> arm64: support more than one crash kernel regions(see [1])
> 
> Another update is document about DT property 'linux,usable-memory-range':
> schemas: update 'linux,usable-memory-range' node schema(see [2])
> 
> Changes since [v10]
> - Reimplement crashkernel=X suggested by Catalin, Many thanks to Catalin.
> 
> Changes since [v9]
> - Patch 1 add Acked-by from Dave.
> - Update patch 5 according to Dave's comments.
> - Update chosen schema.
> 
> Changes since [v8]
> - Reuse DT property "linux,usable-memory-range".
> Suggested by Rob, reuse DT property "linux,usable-memory-range" to pass the low
> memory region.
> - Fix kdump broken with ZONE_DMA reintroduced.
> - Update chosen schema.
> 
> Changes since [v7]
> - Move x86 CRASH_ALIGN to 2M
> Suggested by Dave and do some test, move x86 CRASH_ALIGN to 2M.
> - Update Documentation/devicetree/bindings/chosen.txt.
> Add corresponding documentation to Documentation/devicetree/bindings/chosen.txt
> suggested by Arnd.
> - Add Tested-by from Jhon and pk.
> 
> Changes since [v6]
> - Fix build errors reported by kbuild test robot.
> 
> Changes since [v5]
> - Move reserve_crashkernel_low() into kernel/crash_core.c.
> - Delete crashkernel=X,high.
> - Modify crashkernel=X,low.
> If crashkernel=X,low is specified simultaneously, reserve spcified size low
> memory for crash kdump kernel devices firstly and then reserve memory above 4G.
> In addition, rename crashk_low_res as "Crash kernel (low)" for arm64, and then
> pass to crash dump kernel by DT property "linux,low-memory-range".
> - Update Documentation/admin-guide/kdump/kdump.rst.
> 
> Changes since [v4]
> - Reimplement memblock_cap_memory_ranges for multiple ranges by Mike.
> 
> Changes since [v3]
> - Add memblock_cap_memory_ranges back for multiple ranges.
> - Fix some compiling warnings.
> 
> Changes since [v2]
> - Split patch "arm64: kdump: support reserving crashkernel above 4G" as
> two. Put "move reserve_crashkernel_low() into kexec_core.c" in a separate
> patch.
> 
> Changes since [v1]:
> - Move common reserve_crashkernel_low() code into kernel/kexec_core.c.
> - Remove memblock_cap_memory_ranges() i added in v1 and implement that
> in fdt_enforce_memory_region().
> There are at most two crash kernel regions, for two crash kernel regions
> case, we cap the memory range [min(regs[*].start), max(regs[*].end)]
> and then remove the memory range in the middle.
> 
> [1]: http://lists.infradead.org/pipermail/kexec/2020-June/020737.html
> [2]: https://github.com/robherring/dt-schema/pull/19 
> [v1]: https://lkml.org/lkml/2019/4/2/1174
> [v2]: https://lkml.org/lkml/2019/4/9/86
> [v3]: https://lkml.org/lkml/2019/4/9/306
> [v4]: https://lkml.org/lkml/2019/4/15/273
> [v5]: https://lkml.org/lkml/2019/5/6/1360
> [v6]: https://lkml.org/lkml/2019/8/30/142
> [v7]: https://lkml.org/lkml/2019/12/23/411
> [v8]: https://lkml.org/lkml/2020/5/21/213
> [v9]: https://lkml.org/lkml/2020/6/28/73
> [v10]: https://lkml.org/lkml/2020/7/2/1443
> 
> Chen Zhou (5):
>   arm64: kdump: add macro CRASH_ALIGN and CRASH_ADDR_LOW_MAX
>   x86: kdump: move reserve_crashkernel_low() into crash_core.c
>   arm64: kdump: reimplement crashkernel=X
>   arm64: kdump: add memory for devices by DT property
>     linux,usable-memory-range
>   kdump: update Documentation about crashkernel
> 
>  Documentation/admin-guide/kdump/kdump.rst     | 21 +++-
>  .../admin-guide/kernel-parameters.txt         | 11 ++-
>  arch/arm64/include/asm/kexec.h                |  9 ++
>  arch/arm64/include/asm/processor.h            |  1 +
>  arch/arm64/kernel/setup.c                     |  8 +-
>  arch/arm64/mm/init.c                          | 99 +++++++++++++++----
>  arch/x86/include/asm/kexec.h                  | 24 +++++
>  arch/x86/kernel/setup.c                       | 86 ++--------------
>  include/linux/crash_core.h                    |  3 +
>  include/linux/kexec.h                         |  2 -
>  kernel/crash_core.c                           | 74 ++++++++++++++
>  kernel/kexec_core.c                           | 17 ----
>  12 files changed, 233 insertions(+), 122 deletions(-)
> 
> -- 
> 2.20.1
> 
> 
> _______________________________________________
> kexec mailing list
> kexec@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
> 


      parent reply	other threads:[~2020-08-06 16:28 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-01 13:08 [PATCH v11 0/5] support reserving crashkernel above 4G on arm64 kdump Chen Zhou
2020-08-01 13:08 ` [PATCH v11 1/5] arm64: kdump: add macro CRASH_ALIGN and CRASH_ADDR_LOW_MAX Chen Zhou
2020-08-01 13:08 ` [PATCH v11 2/5] x86: kdump: move reserve_crashkernel_low() into crash_core.c Chen Zhou
2020-08-06 13:36   ` Ingo Molnar
2020-09-01 16:50     ` Catalin Marinas
2020-08-08  9:59   ` Dave Young
2020-08-01 13:08 ` [PATCH v11 3/5] arm64: kdump: reimplement crashkernel=X Chen Zhou
2020-09-02 17:09   ` Catalin Marinas
2020-09-03 11:26     ` chenzhou
2020-09-03 13:18       ` chenzhou
2020-09-04  3:04       ` Dave Young
2020-09-04  3:10         ` Dave Young
2020-09-04  4:02           ` chenzhou
2020-09-04  4:16             ` Dave Young
2020-09-04  6:39               ` chenzhou
2020-08-01 13:08 ` [PATCH v11 4/5] arm64: kdump: add memory for devices by DT property linux,usable-memory-range Chen Zhou
2020-08-01 13:08 ` [PATCH v11 5/5] kdump: update Documentation about crashkernel Chen Zhou
2020-08-08 10:02   ` Dave Young
2020-08-10  3:28     ` chenzhou
2020-08-10  5:59       ` Dave Young
2020-08-10  6:03       ` Dave Young
2020-08-18  7:07         ` chenzhou
2020-08-19 12:03           ` Dave Young
2020-08-28  1:59             ` chenzhou
2020-09-01 17:13           ` Catalin Marinas
2020-09-02 16:42           ` Catalin Marinas
2020-09-02 17:13   ` Catalin Marinas
2020-09-03 11:56     ` chenzhou
2020-08-06 11:37 ` Dave Young [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200806113750.GB2492@dhcp-128-65.nay.redhat.com \
    --to=dyoung@redhat.com \
    --cc=John.P.donnelly@oracle.com \
    --cc=arnd@arndb.de \
    --cc=bhe@redhat.com \
    --cc=bhsharma@redhat.com \
    --cc=catalin.marinas@arm.com \
    --cc=chenzhou10@huawei.com \
    --cc=corbet@lwn.net \
    --cc=guohanjun@huawei.com \
    --cc=horms@verge.net.au \
    --cc=huawei.libin@huawei.com \
    --cc=james.morse@arm.com \
    --cc=kexec@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=prabhakar.pkin@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=wangkefeng.wang@huawei.com \
    --cc=will@kernel.org \
    --cc=xiexiuqi@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).