[PATCH stable 5.4 v2 3/4] ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address

From: Florian Fainelli <f.fainelli@gmail.com>
To: stable@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>, Joel Stanley <joel@jms.id.au>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Russell King <rmk+kernel@armlinux.org.uk>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Russell King <linux@armlinux.org.uk>,
	Linus Walleij <linus.walleij@linaro.org>,
	Nicolas Pitre <nico@fluxnic.net>, Sasha Levin <sashal@kernel.org>,
	linux-doc@vger.kernel.org (open list:DOCUMENTATION),
	linux-kernel@vger.kernel.org (open list),
	linux-arm-kernel@lists.infradead.org (moderated list:ARM PORT),
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH stable 5.4 v2 3/4] ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address
Date: Mon, 10 May 2021 06:33:20 -0700	[thread overview]
Message-ID: <20210510133321.1790243-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20210510133321.1790243-1-f.fainelli@gmail.com>

From: Ard Biesheuvel <ardb@kernel.org>

commit fc2933c133744305236793025b00c2f7d258b687 upstream

Commit

  149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region")

created a permanent, read-only section mapping of the device tree blob
provided by the firmware, and added a set of macros to get the base and
size of the virtually mapped FDT based on the physical address. However,
while the mapping code uses the SECTION_SIZE macro correctly, the macros
use PMD_SIZE instead, which means something entirely different on ARM when
using short descriptors, and is therefore not the right quantity to use
here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names
of the macro and its parameter to clarify that it returns the virtual
address of the start of the FDT, based on the physical address in memory.

Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/include/asm/memory.h | 6 +++---
 arch/arm/kernel/setup.c       | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index bb79e52aeb90..f717d7122d9d 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -68,8 +68,8 @@
 #define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
 
 #define FDT_FIXED_BASE		UL(0xff800000)
-#define FDT_FIXED_SIZE		(2 * PMD_SIZE)
-#define FDT_VIRT_ADDR(physaddr)	((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE))
+#define FDT_FIXED_SIZE		(2 * SECTION_SIZE)
+#define FDT_VIRT_BASE(physbase)	((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE))
 
 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
@@ -111,7 +111,7 @@ extern unsigned long vectors_base;
 #define MODULES_VADDR		PAGE_OFFSET
 
 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
-#define FDT_VIRT_ADDR(physaddr)  ((void *)(physaddr))
+#define FDT_VIRT_BASE(physbase)  ((void *)(physbase))
 
 #endif /* !CONFIG_MMU */
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index d9bc70f25728..924285d0bccd 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1080,7 +1080,7 @@ void __init setup_arch(char **cmdline_p)
 	void *atags_vaddr = NULL;
 
 	if (__atags_pointer)
-		atags_vaddr = FDT_VIRT_ADDR(__atags_pointer);
+		atags_vaddr = FDT_VIRT_BASE(__atags_pointer);
 
 	setup_processor();
 	if (atags_vaddr) {
-- 
2.25.1

