linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag
@ 2021-06-16  6:27 Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 01/29] docs: devices.rst: better reference documentation docs Mauro Carvalho Chehab
                   ` (29 more replies)
  0 siblings, 30 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, bpf, coresight, devicetree,
	kunit-dev, kvm, linux-acpi, linux-arm-kernel, linux-gpio,
	linux-i2c, linux-kselftest, linux-pci, linux-pm,
	linux-security-module, netdev, x86

(Maintainers bcc, to avoid too many recipient troubles)

As discussed at:
	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/

It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
automarkup.py extension should handle it automatically, on most cases.

There are a couple of exceptions to this rule:

1. when :doc:  tag is used to point to a kernel-doc DOC: markup;
2. when it is used with a named tag, e. g. :doc:`some name <foo>`;

On this series:

Patch 1 manually adjust the references inside driver-api/pm/devices.rst,
as there it uses :file:`foo` to refer to some Documentation/ files;

Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst
into a list, carefully avoiding the 

The remaining patches convert the other occurrences via a replace script.
They were manually edited, in order to honour 80-columns where possible.

This series based on docs-next branch. In order to avoid merge conflicts,
I rebased it internally against yesterday's linux-next, dropping a patch
and a hunk that would have caused conflicts there.

I'll re-send the remaining patch (plus another patch) with conflicting
changes, together with any other doc:`filename` reference that might
still be upstream by 5.14-rc1.

---

v2:
   - dropped media patches (as I merged via my own tree);
   - removed one patch that would conflict at linux-next (adm1177.rst);
   - removed one hunk fron kunit patch that would also conflict at
     linux-next.

Mauro Carvalho Chehab (29):
  docs: devices.rst: better reference documentation docs
  docs: dev-tools: kunit: don't use a table for docs name
  docs: admin-guide: pm: avoid using ReST :doc:`foo` markup
  docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
  docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup
  docs: block: biodoc.rst: avoid using ReST :doc:`foo` markup
  docs: bpf: bpf_lsm.rst: avoid using ReST :doc:`foo` markup
  docs: core-api: avoid using ReST :doc:`foo` markup
  docs: dev-tools: testing-overview.rst: avoid using ReST :doc:`foo`
    markup
  docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
  docs: devicetree: bindings: submitting-patches.rst: avoid using ReST
    :doc:`foo` markup
  docs: doc-guide: avoid using ReST :doc:`foo` markup
  docs: driver-api: avoid using ReST :doc:`foo` markup
  docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo`
    markup
  docs: driver-api: surface_aggregator: avoid using ReST :doc:`foo`
    markup
  docs: driver-api: usb: avoid using ReST :doc:`foo` markup
  docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup
  docs: i2c: avoid using ReST :doc:`foo` markup
  docs: kernel-hacking: hacking.rst: avoid using ReST :doc:`foo` markup
  docs: networking: devlink: avoid using ReST :doc:`foo` markup
  docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo`
    markup
  docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
  docs: process: submitting-patches.rst: avoid using ReST :doc:`foo`
    markup
  docs: security: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo`
    markup
  docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
  docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
  docs: x86: avoid using ReST :doc:`foo` markup

 .../PCI/endpoint/pci-endpoint-cfs.rst         |  2 +-
 Documentation/PCI/pci.rst                     |  6 +--
 .../special-register-buffer-data-sampling.rst |  3 +-
 Documentation/admin-guide/pm/intel_idle.rst   | 16 +++++---
 Documentation/admin-guide/pm/intel_pstate.rst |  9 +++--
 Documentation/admin-guide/sysctl/abi.rst      |  2 +-
 Documentation/admin-guide/sysctl/kernel.rst   | 37 ++++++++++---------
 Documentation/block/biodoc.rst                |  2 +-
 Documentation/bpf/bpf_lsm.rst                 | 13 ++++---
 .../core-api/bus-virt-phys-mapping.rst        |  2 +-
 Documentation/core-api/dma-api.rst            |  5 ++-
 Documentation/core-api/dma-isa-lpc.rst        |  2 +-
 Documentation/core-api/index.rst              |  4 +-
 Documentation/dev-tools/kunit/api/index.rst   |  8 ++--
 Documentation/dev-tools/kunit/faq.rst         |  2 +-
 Documentation/dev-tools/kunit/index.rst       | 14 +++----
 Documentation/dev-tools/kunit/start.rst       |  4 +-
 Documentation/dev-tools/kunit/tips.rst        |  5 ++-
 Documentation/dev-tools/kunit/usage.rst       |  8 ++--
 Documentation/dev-tools/testing-overview.rst  | 16 ++++----
 .../bindings/submitting-patches.rst           | 11 +++---
 Documentation/doc-guide/contributing.rst      |  8 ++--
 Documentation/driver-api/gpio/using-gpio.rst  |  4 +-
 Documentation/driver-api/ioctl.rst            |  2 +-
 Documentation/driver-api/pm/devices.rst       |  8 ++--
 .../surface_aggregator/clients/index.rst      |  3 +-
 .../surface_aggregator/internal.rst           | 15 ++++----
 .../surface_aggregator/overview.rst           |  6 ++-
 Documentation/driver-api/usb/dma.rst          |  6 +--
 .../acpi/dsd/data-node-references.rst         |  3 +-
 .../firmware-guide/acpi/dsd/graph.rst         |  2 +-
 .../firmware-guide/acpi/enumeration.rst       |  7 ++--
 Documentation/i2c/instantiating-devices.rst   |  2 +-
 Documentation/i2c/old-module-parameters.rst   |  3 +-
 Documentation/i2c/smbus-protocol.rst          |  4 +-
 Documentation/kernel-hacking/hacking.rst      |  4 +-
 .../networking/devlink/devlink-region.rst     |  2 +-
 .../networking/devlink/devlink-trap.rst       |  4 +-
 Documentation/process/submitting-patches.rst  | 32 ++++++++--------
 Documentation/security/landlock.rst           |  3 +-
 Documentation/trace/coresight/coresight.rst   |  8 ++--
 Documentation/trace/ftrace.rst                |  2 +-
 Documentation/userspace-api/landlock.rst      | 11 +++---
 Documentation/virt/kvm/s390-pv-boot.rst       |  2 +-
 Documentation/x86/boot.rst                    |  4 +-
 Documentation/x86/mtrr.rst                    |  2 +-
 46 files changed, 171 insertions(+), 147 deletions(-)

-- 
2.31.1



^ permalink raw reply	[flat|nested] 42+ messages in thread

* [PATCH v2 01/29] docs: devices.rst: better reference documentation docs
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 02/29] docs: dev-tools: kunit: don't use a table for docs name Mauro Carvalho Chehab
                   ` (28 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel

There's no need to use either :file: or :doc: tags for documentation,
as automarkup.py automatically converts Documentation/*.rst into
a cross-reference.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/driver-api/pm/devices.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst
index 6b3bfd29fd84..d448cb57df86 100644
--- a/Documentation/driver-api/pm/devices.rst
+++ b/Documentation/driver-api/pm/devices.rst
@@ -217,7 +217,7 @@ system-wide transition to a sleep state even though its :c:member:`runtime_auto`
 flag is clear.
 
 For more information about the runtime power management framework, refer to
-:file:`Documentation/power/runtime_pm.rst`.
+Documentation/power/runtime_pm.rst.
 
 
 Calling Drivers to Enter and Leave System Sleep States
@@ -655,7 +655,7 @@ been thawed.  Generally speaking, the PM notifiers are suitable for performing
 actions that either require user space to be available, or at least won't
 interfere with user space.
 
-For details refer to :doc:`notifiers`.
+For details refer to Documentation/driver-api/pm/notifiers.rst.
 
 
 Device Low-Power (suspend) States
@@ -726,7 +726,7 @@ it into account in any way.
 
 Devices may be defined as IRQ-safe which indicates to the PM core that their
 runtime PM callbacks may be invoked with disabled interrupts (see
-:file:`Documentation/power/runtime_pm.rst` for more information).  If an
+Documentation/power/runtime_pm.rst for more information).  If an
 IRQ-safe device belongs to a PM domain, the runtime PM of the domain will be
 disallowed, unless the domain itself is defined as IRQ-safe. However, it
 makes sense to define a PM domain as IRQ-safe only if all the devices in it
@@ -805,7 +805,7 @@ The ``DPM_FLAG_MAY_SKIP_RESUME`` Driver Flag
 --------------------------------------------
 
 During system-wide resume from a sleep state it's easiest to put devices into
-the full-power state, as explained in :file:`Documentation/power/runtime_pm.rst`.
+the full-power state, as explained in Documentation/power/runtime_pm.rst.
 [Refer to that document for more information regarding this particular issue as
 well as for information on the device runtime power management framework in
 general.]  However, it often is desirable to leave devices in suspend after
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 02/29] docs: dev-tools: kunit: don't use a table for docs name
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 01/29] docs: devices.rst: better reference documentation docs Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 03/29] docs: admin-guide: pm: avoid using ReST :doc:`foo` markup Mauro Carvalho Chehab
                   ` (27 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Brendan Higgins, David Gow, kunit-dev,
	linux-kernel, linux-kselftest

We'll be replacing :doc:`foo` references to
Documentation/foo.rst. Yet, here it happens inside a table.
Doing a search-and-replace would break it.

Yet, as there's no good reason to use a table there,
let's just convert it into a list.

Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/dev-tools/kunit/api/index.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/dev-tools/kunit/api/index.rst b/Documentation/dev-tools/kunit/api/index.rst
index 9b9bffe5d41a..b33ad72bcf0b 100644
--- a/Documentation/dev-tools/kunit/api/index.rst
+++ b/Documentation/dev-tools/kunit/api/index.rst
@@ -10,7 +10,7 @@ API Reference
 This section documents the KUnit kernel testing API. It is divided into the
 following sections:
 
-================================= ==============================================
-:doc:`test`                       documents all of the standard testing API
-                                  excluding mocking or mocking related features.
-================================= ==============================================
+Documentation/dev-tools/kunit/api/test.rst
+
+ - documents all of the standard testing API excluding mocking
+   or mocking related features.
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 03/29] docs: admin-guide: pm: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 01/29] docs: devices.rst: better reference documentation docs Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 02/29] docs: dev-tools: kunit: don't use a table for docs name Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 04/29] docs: admin-guide: hw-vuln: " Mauro Carvalho Chehab
                   ` (26 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Rafael J. Wysocki, Viresh Kumar,
	linux-kernel, linux-pm

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/admin-guide/pm/intel_idle.rst   | 16 ++++++++++------
 Documentation/admin-guide/pm/intel_pstate.rst |  9 +++++----
 2 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/Documentation/admin-guide/pm/intel_idle.rst b/Documentation/admin-guide/pm/intel_idle.rst
index 89309e1b0e48..b799a43da62e 100644
--- a/Documentation/admin-guide/pm/intel_idle.rst
+++ b/Documentation/admin-guide/pm/intel_idle.rst
@@ -20,8 +20,8 @@ Nehalem and later generations of Intel processors, but the level of support for
 a particular processor model in it depends on whether or not it recognizes that
 processor model and may also depend on information coming from the platform
 firmware.  [To understand ``intel_idle`` it is necessary to know how ``CPUIdle``
-works in general, so this is the time to get familiar with :doc:`cpuidle` if you
-have not done that yet.]
+works in general, so this is the time to get familiar with
+Documentation/admin-guide/pm/cpuidle.rst if you have not done that yet.]
 
 ``intel_idle`` uses the ``MWAIT`` instruction to inform the processor that the
 logical CPU executing it is idle and so it may be possible to put some of the
@@ -53,7 +53,8 @@ processor) corresponding to them depends on the processor model and it may also
 depend on the configuration of the platform.
 
 In order to create a list of available idle states required by the ``CPUIdle``
-subsystem (see :ref:`idle-states-representation` in :doc:`cpuidle`),
+subsystem (see :ref:`idle-states-representation` in
+Documentation/admin-guide/pm/cpuidle.rst),
 ``intel_idle`` can use two sources of information: static tables of idle states
 for different processor models included in the driver itself and the ACPI tables
 of the system.  The former are always used if the processor model at hand is
@@ -98,7 +99,8 @@ states may not be enabled by default if there are no matching entries in the
 preliminary list of idle states coming from the ACPI tables.  In that case user
 space still can enable them later (on a per-CPU basis) with the help of
 the ``disable`` idle state attribute in ``sysfs`` (see
-:ref:`idle-states-representation` in :doc:`cpuidle`).  This basically means that
+:ref:`idle-states-representation` in
+Documentation/admin-guide/pm/cpuidle.rst).  This basically means that
 the idle states "known" to the driver may not be enabled by default if they have
 not been exposed by the platform firmware (through the ACPI tables).
 
@@ -186,7 +188,8 @@ be desirable.  In practice, it is only really necessary to do that if the idle
 states in question cannot be enabled during system startup, because in the
 working state of the system the CPU power management quality of service (PM
 QoS) feature can be used to prevent ``CPUIdle`` from touching those idle states
-even if they have been enumerated (see :ref:`cpu-pm-qos` in :doc:`cpuidle`).
+even if they have been enumerated (see :ref:`cpu-pm-qos` in
+Documentation/admin-guide/pm/cpuidle.rst).
 Setting ``max_cstate`` to 0 causes the ``intel_idle`` initialization to fail.
 
 The ``no_acpi`` and ``use_acpi`` module parameters (recognized by ``intel_idle``
@@ -202,7 +205,8 @@ Namely, the positions of the bits that are set in the ``states_off`` value are
 the indices of idle states to be disabled by default (as reflected by the names
 of the corresponding idle state directories in ``sysfs``, :file:`state0`,
 :file:`state1` ... :file:`state<i>` ..., where ``<i>`` is the index of the given
-idle state; see :ref:`idle-states-representation` in :doc:`cpuidle`).
+idle state; see :ref:`idle-states-representation` in
+Documentation/admin-guide/pm/cpuidle.rst).
 
 For example, if ``states_off`` is equal to 3, the driver will disable idle
 states 0 and 1 by default, and if it is equal to 8, idle state 3 will be
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index df29b4f1f219..7a7d4b041eac 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -18,8 +18,8 @@ General Information
 (``CPUFreq``).  It is a scaling driver for the Sandy Bridge and later
 generations of Intel processors.  Note, however, that some of those processors
 may not be supported.  [To understand ``intel_pstate`` it is necessary to know
-how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if
-you have not done that yet.]
+how ``CPUFreq`` works in general, so this is the time to read
+Documentation/admin-guide/pm/cpufreq.rst if you have not done that yet.]
 
 For the processors supported by ``intel_pstate``, the P-state concept is broader
 than just an operating frequency or an operating performance point (see the
@@ -445,8 +445,9 @@ Interpretation of Policy Attributes
 -----------------------------------
 
 The interpretation of some ``CPUFreq`` policy attributes described in
-:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver
-and it generally depends on the driver's `operation mode <Operation Modes_>`_.
+Documentation/admin-guide/pm/cpufreq.rst is special with ``intel_pstate``
+as the current scaling driver and it generally depends on the driver's
+`operation mode <Operation Modes_>`_.
 
 First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and
 ``scaling_cur_freq`` attributes are produced by applying a processor-specific
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 04/29] docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (2 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 03/29] docs: admin-guide: pm: avoid using ReST :doc:`foo` markup Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16 18:21   ` mark gross
  2021-06-16  6:27 ` [PATCH v2 05/29] docs: admin-guide: sysctl: " Mauro Carvalho Chehab
                   ` (25 subsequent siblings)
  29 siblings, 1 reply; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Heinrich Schuchardt, Mark Gross, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../hw-vuln/special-register-buffer-data-sampling.rst          | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
index 3b1ce68d2456..966c9b3296ea 100644
--- a/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
+++ b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
@@ -3,7 +3,8 @@
 SRBDS - Special Register Buffer Data Sampling
 =============================================
 
-SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques to
+SRBDS is a hardware vulnerability that allows MDS
+Documentation/admin-guide/hw-vuln/mds.rst techniques to
 infer values returned from special register accesses.  Special register
 accesses are accesses to off core registers.  According to Intel's evaluation,
 the special register reads that have a security expectation of privacy are
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 05/29] docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (3 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 04/29] docs: admin-guide: hw-vuln: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 06/29] docs: block: biodoc.rst: " Mauro Carvalho Chehab
                   ` (24 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Andrew Klychkov, Lepton Wu, Qais Yousef,
	Randy Dunlap, Stephen Kitt, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/admin-guide/sysctl/abi.rst    |  2 +-
 Documentation/admin-guide/sysctl/kernel.rst | 37 +++++++++++----------
 2 files changed, 21 insertions(+), 18 deletions(-)

diff --git a/Documentation/admin-guide/sysctl/abi.rst b/Documentation/admin-guide/sysctl/abi.rst
index 77b1d1b2ad42..4e6db0a2a4c0 100644
--- a/Documentation/admin-guide/sysctl/abi.rst
+++ b/Documentation/admin-guide/sysctl/abi.rst
@@ -11,7 +11,7 @@ Documentation for /proc/sys/abi/
 
 Copyright (c) 2020, Stephen Kitt
 
-For general info, see :doc:`index`.
+For general info, see Documentation/admin-guide/sysctl/index.rst.
 
 ------------------------------------------------------------------------------
 
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index c24f57f2c782..10df7fc6495f 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -9,7 +9,8 @@ Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
 
 Copyright (c) 2009,        Shen Feng<shen@cn.fujitsu.com>
 
-For general info and legal blurb, please look in :doc:`index`.
+For general info and legal blurb, please look in
+Documentation/admin-guide/sysctl/index.rst.
 
 ------------------------------------------------------------------------------
 
@@ -54,7 +55,7 @@ free space valid for 30 seconds.
 acpi_video_flags
 ================
 
-See :doc:`/power/video`. This allows the video resume mode to be set,
+See Documentation/power/video.rst. This allows the video resume mode to be set,
 in a similar fashion to the ``acpi_sleep`` kernel parameter, by
 combining the following values:
 
@@ -89,7 +90,7 @@ is 0x15 and the full version number is 0x234, this file will contain
 the value 340 = 0x154.
 
 See the ``type_of_loader`` and ``ext_loader_type`` fields in
-:doc:`/x86/boot` for additional information.
+Documentation/x86/boot.rst for additional information.
 
 
 bootloader_version (x86 only)
@@ -99,7 +100,7 @@ The complete bootloader version number.  In the example above, this
 file will contain the value 564 = 0x234.
 
 See the ``type_of_loader`` and ``ext_loader_ver`` fields in
-:doc:`/x86/boot` for additional information.
+Documentation/x86/boot.rst for additional information.
 
 
 bpf_stats_enabled
@@ -269,7 +270,7 @@ see the ``hostname(1)`` man page.
 firmware_config
 ===============
 
-See :doc:`/driver-api/firmware/fallback-mechanisms`.
+See Documentation/driver-api/firmware/fallback-mechanisms.rst.
 
 The entries in this directory allow the firmware loader helper
 fallback to be controlled:
@@ -297,7 +298,7 @@ crashes and outputting them to a serial console.
 ftrace_enabled, stack_tracer_enabled
 ====================================
 
-See :doc:`/trace/ftrace`.
+See Documentation/trace/ftrace.rst.
 
 
 hardlockup_all_cpu_backtrace
@@ -325,7 +326,7 @@ when a hard lockup is detected.
 1 Panic on hard lockup.
 = ===========================
 
-See :doc:`/admin-guide/lockup-watchdogs` for more information.
+See Documentation/admin-guide/lockup-watchdogs.rst for more information.
 This can also be set using the nmi_watchdog kernel parameter.
 
 
@@ -586,7 +587,8 @@ in a KVM virtual machine. This default can be overridden by adding::
 
    nmi_watchdog=1
 
-to the guest kernel command line (see :doc:`/admin-guide/kernel-parameters`).
+to the guest kernel command line (see
+Documentation/admin-guide/kernel-parameters.rst).
 
 
 numa_balancing
@@ -1071,7 +1073,7 @@ that support this feature.
 real-root-dev
 =============
 
-See :doc:`/admin-guide/initrd`.
+See Documentation/admin-guide/initrd.rst.
 
 
 reboot-cmd (SPARC only)
@@ -1158,7 +1160,7 @@ will take effect.
 seccomp
 =======
 
-See :doc:`/userspace-api/seccomp_filter`.
+See Documentation/userspace-api/seccomp_filter.rst.
 
 
 sg-big-buff
@@ -1329,7 +1331,7 @@ the boot PROM.
 sysrq
 =====
 
-See :doc:`/admin-guide/sysrq`.
+See Documentation/admin-guide/sysrq.rst.
 
 
 tainted
@@ -1359,15 +1361,16 @@ ORed together. The letters are seen in "Tainted" line of Oops reports.
 131072  `(T)`  The kernel was built with the struct randomization plugin
 ======  =====  ==============================================================
 
-See :doc:`/admin-guide/tainted-kernels` for more information.
+See Documentation/admin-guide/tainted-kernels.rst for more information.
 
 Note:
   writes to this sysctl interface will fail with ``EINVAL`` if the kernel is
   booted with the command line option ``panic_on_taint=<bitmask>,nousertaint``
   and any of the ORed together values being written to ``tainted`` match with
   the bitmask declared on panic_on_taint.
-  See :doc:`/admin-guide/kernel-parameters` for more details on that particular
-  kernel command line option and its optional ``nousertaint`` switch.
+  See Documentation/admin-guide/kernel-parameters.rst for more details on
+  that particular kernel command line option and its optional
+  ``nousertaint`` switch.
 
 threads-max
 ===========
@@ -1391,7 +1394,7 @@ If a value outside of this range is written to ``threads-max`` an
 traceoff_on_warning
 ===================
 
-When set, disables tracing (see :doc:`/trace/ftrace`) when a
+When set, disables tracing (see Documentation/trace/ftrace.rst) when a
 ``WARN()`` is hit.
 
 
@@ -1411,8 +1414,8 @@ will send them to printk() again.
 
 This only works if the kernel was booted with ``tp_printk`` enabled.
 
-See :doc:`/admin-guide/kernel-parameters` and
-:doc:`/trace/boottime-trace`.
+See Documentation/admin-guide/kernel-parameters.rst and
+Documentation/trace/boottime-trace.rst.
 
 
 .. _unaligned-dump-stack:
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 06/29] docs: block: biodoc.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (4 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 05/29] docs: admin-guide: sysctl: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 07/29] docs: bpf: bpf_lsm.rst: " Mauro Carvalho Chehab
                   ` (23 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Jens Axboe, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/block/biodoc.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/block/biodoc.rst b/Documentation/block/biodoc.rst
index 1d4d71e391af..2098477851a4 100644
--- a/Documentation/block/biodoc.rst
+++ b/Documentation/block/biodoc.rst
@@ -196,7 +196,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to :doc:`/core-api/dma-api-howto` for a discussion
+Note: Please refer to Documentation/core-api/dma-api-howto.rst for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 07/29] docs: bpf: bpf_lsm.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (5 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 06/29] docs: block: biodoc.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 08/29] docs: core-api: " Mauro Carvalho Chehab
                   ` (22 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Alexei Starovoitov, Andrii Nakryiko,
	Brendan Jackman, Daniel Borkmann, Florent Revest, John Fastabend,
	KP Singh, Martin KaFai Lau, Song Liu, Yonghong Song, bpf,
	linux-kernel, netdev

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/bpf/bpf_lsm.rst | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/bpf/bpf_lsm.rst b/Documentation/bpf/bpf_lsm.rst
index 1c0a75a51d79..0dc3fb0d9544 100644
--- a/Documentation/bpf/bpf_lsm.rst
+++ b/Documentation/bpf/bpf_lsm.rst
@@ -20,10 +20,10 @@ LSM hook:
 Other LSM hooks which can be instrumented can be found in
 ``include/linux/lsm_hooks.h``.
 
-eBPF programs that use :doc:`/bpf/btf` do not need to include kernel headers
-for accessing information from the attached eBPF program's context. They can
-simply declare the structures in the eBPF program and only specify the fields
-that need to be accessed.
+eBPF programs that use Documentation/bpf/btf.rst do not need to include kernel
+headers for accessing information from the attached eBPF program's context.
+They can simply declare the structures in the eBPF program and only specify
+the fields that need to be accessed.
 
 .. code-block:: c
 
@@ -88,8 +88,9 @@ example:
 
 The ``__attribute__((preserve_access_index))`` is a clang feature that allows
 the BPF verifier to update the offsets for the access at runtime using the
-:doc:`/bpf/btf` information. Since the BPF verifier is aware of the types, it
-also validates all the accesses made to the various types in the eBPF program.
+Documentation/bpf/btf.rst information. Since the BPF verifier is aware of the
+types, it also validates all the accesses made to the various types in the
+eBPF program.
 
 Loading
 -------
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 08/29] docs: core-api: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (6 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 07/29] docs: bpf: bpf_lsm.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 09/29] docs: dev-tools: testing-overview.rst: " Mauro Carvalho Chehab
                   ` (21 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Daniel Borkmann, Lukas Bulwahn,
	Robin Murphy, Tomasz Figa, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/core-api/bus-virt-phys-mapping.rst | 2 +-
 Documentation/core-api/dma-api.rst               | 5 +++--
 Documentation/core-api/dma-isa-lpc.rst           | 2 +-
 Documentation/core-api/index.rst                 | 4 ++--
 4 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/core-api/bus-virt-phys-mapping.rst b/Documentation/core-api/bus-virt-phys-mapping.rst
index c7bc99cd2e21..c72b24a7d52c 100644
--- a/Documentation/core-api/bus-virt-phys-mapping.rst
+++ b/Documentation/core-api/bus-virt-phys-mapping.rst
@@ -8,7 +8,7 @@ How to access I/O mapped memory from within device drivers
 
 	The virt_to_bus() and bus_to_virt() functions have been
 	superseded by the functionality provided by the PCI DMA interface
-	(see :doc:`/core-api/dma-api-howto`).  They continue
+	(see Documentation/core-api/dma-api-howto.rst).  They continue
 	to be documented below for historical purposes, but new code
 	must not use them. --davidm 00/12/12
 
diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst
index 00a1d4fa3f9e..6d6d0edd2d27 100644
--- a/Documentation/core-api/dma-api.rst
+++ b/Documentation/core-api/dma-api.rst
@@ -5,7 +5,7 @@ Dynamic DMA mapping using the generic device
 :Author: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 
 This document describes the DMA API.  For a more gentle introduction
-of the API (and actual examples), see :doc:`/core-api/dma-api-howto`.
+of the API (and actual examples), see Documentation/core-api/dma-api-howto.rst.
 
 This API is split into two pieces.  Part I describes the basic API.
 Part II describes extensions for supporting non-consistent memory
@@ -479,7 +479,8 @@ without the _attrs suffixes, except that they pass an optional
 dma_attrs.
 
 The interpretation of DMA attributes is architecture-specific, and
-each attribute should be documented in :doc:`/core-api/dma-attributes`.
+each attribute should be documented in
+Documentation/core-api/dma-attributes.rst.
 
 If dma_attrs are 0, the semantics of each of these functions
 is identical to those of the corresponding function
diff --git a/Documentation/core-api/dma-isa-lpc.rst b/Documentation/core-api/dma-isa-lpc.rst
index e59a3d35a93d..17b193603f0a 100644
--- a/Documentation/core-api/dma-isa-lpc.rst
+++ b/Documentation/core-api/dma-isa-lpc.rst
@@ -17,7 +17,7 @@ To do ISA style DMA you need to include two headers::
 	#include <asm/dma.h>
 
 The first is the generic DMA API used to convert virtual addresses to
-bus addresses (see :doc:`/core-api/dma-api` for details).
+bus addresses (see Documentation/core-api/dma-api.rst for details).
 
 The second contains the routines specific to ISA DMA transfers. Since
 this is not present on all platforms make sure you construct your
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index f1c9d20bd42d..5de2c7a4b1b3 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -48,7 +48,7 @@ Concurrency primitives
 ======================
 
 How Linux keeps everything from happening at the same time.  See
-:doc:`/locking/index` for more related documentation.
+Documentation/locking/index.rst for more related documentation.
 
 .. toctree::
    :maxdepth: 1
@@ -77,7 +77,7 @@ Memory management
 =================
 
 How to allocate and use memory in the kernel.  Note that there is a lot
-more memory-management documentation in :doc:`/vm/index`.
+more memory-management documentation in Documentation/vm/index.rst.
 
 .. toctree::
    :maxdepth: 1
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 09/29] docs: dev-tools: testing-overview.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (7 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 08/29] docs: core-api: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 10/29] docs: dev-tools: kunit: " Mauro Carvalho Chehab
                   ` (20 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Daniel Latypov, David Gow, Marco Elver,
	linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/dev-tools/testing-overview.rst | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/dev-tools/testing-overview.rst b/Documentation/dev-tools/testing-overview.rst
index b5b46709969c..65feb81edb14 100644
--- a/Documentation/dev-tools/testing-overview.rst
+++ b/Documentation/dev-tools/testing-overview.rst
@@ -71,15 +71,15 @@ can be used to verify that a test is executing particular functions or lines
 of code. This is useful for determining how much of the kernel is being tested,
 and for finding corner-cases which are not covered by the appropriate test.
 
-:doc:`gcov` is GCC's coverage testing tool, which can be used with the kernel
-to get global or per-module coverage. Unlike KCOV, it does not record per-task
-coverage. Coverage data can be read from debugfs, and interpreted using the
-usual gcov tooling.
+Documentation/dev-tools/gcov.rst is GCC's coverage testing tool, which can be
+used with the kernel to get global or per-module coverage. Unlike KCOV, it
+does not record per-task coverage. Coverage data can be read from debugfs,
+and interpreted using the usual gcov tooling.
 
-:doc:`kcov` is a feature which can be built in to the kernel to allow
-capturing coverage on a per-task level. It's therefore useful for fuzzing and
-other situations where information about code executed during, for example, a
-single syscall is useful.
+Documentation/dev-tools/kcov.rst is a feature which can be built in to the
+kernel to allow capturing coverage on a per-task level. It's therefore useful
+for fuzzing and other situations where information about code executed during,
+for example, a single syscall is useful.
 
 
 Dynamic Analysis Tools
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 10/29] docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (8 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 09/29] docs: dev-tools: testing-overview.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-25 21:27   ` Brendan Higgins
  2021-06-16  6:27 ` [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: " Mauro Carvalho Chehab
                   ` (19 subsequent siblings)
  29 siblings, 1 reply; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Brendan Higgins, kunit-dev, linux-kernel,
	linux-kselftest, David Gow

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/dev-tools/kunit/faq.rst   |  2 +-
 Documentation/dev-tools/kunit/index.rst | 14 +++++++-------
 Documentation/dev-tools/kunit/start.rst |  4 ++--
 Documentation/dev-tools/kunit/tips.rst  |  5 +++--
 Documentation/dev-tools/kunit/usage.rst |  8 +++++---
 5 files changed, 18 insertions(+), 15 deletions(-)

diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst
index 8d5029ad210a..5c6555d020f3 100644
--- a/Documentation/dev-tools/kunit/faq.rst
+++ b/Documentation/dev-tools/kunit/faq.rst
@@ -97,7 +97,7 @@ things to try.
    modules will automatically execute associated tests when loaded. Test results
    can be collected from ``/sys/kernel/debug/kunit/<test suite>/results``, and
    can be parsed with ``kunit.py parse``. For more details, see "KUnit on
-   non-UML architectures" in :doc:`usage`.
+   non-UML architectures" in Documentation/dev-tools/kunit/usage.rst.
 
 If none of the above tricks help, you are always welcome to email any issues to
 kunit-dev@googlegroups.com.
diff --git a/Documentation/dev-tools/kunit/index.rst b/Documentation/dev-tools/kunit/index.rst
index 848478838347..25d92a9a05ea 100644
--- a/Documentation/dev-tools/kunit/index.rst
+++ b/Documentation/dev-tools/kunit/index.rst
@@ -36,7 +36,7 @@ To make running these tests (and reading the results) easier, KUnit offers
 results. This provides a quick way of running KUnit tests during development,
 without requiring a virtual machine or separate hardware.
 
-Get started now: :doc:`start`
+Get started now: Documentation/dev-tools/kunit/start.rst
 
 Why KUnit?
 ==========
@@ -88,9 +88,9 @@ it takes to read their test log?
 How do I use it?
 ================
 
-*   :doc:`start` - for new users of KUnit
-*   :doc:`tips` - for short examples of best practices
-*   :doc:`usage` - for a more detailed explanation of KUnit features
-*   :doc:`api/index` - for the list of KUnit APIs used for testing
-*   :doc:`kunit-tool` - for more information on the kunit_tool helper script
-*   :doc:`faq` - for answers to some common questions about KUnit
+*   Documentation/dev-tools/kunit/start.rst - for new users of KUnit
+*   Documentation/dev-tools/kunit/tips.rst - for short examples of best practices
+*   Documentation/dev-tools/kunit/usage.rst - for a more detailed explanation of KUnit features
+*   Documentation/dev-tools/kunit/api/index.rst - for the list of KUnit APIs used for testing
+*   Documentation/dev-tools/kunit/kunit-tool.rst - for more information on the kunit_tool helper script
+*   Documentation/dev-tools/kunit/faq.rst - for answers to some common questions about KUnit
diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst
index 0e65cabe08eb..63ef7b625c13 100644
--- a/Documentation/dev-tools/kunit/start.rst
+++ b/Documentation/dev-tools/kunit/start.rst
@@ -21,7 +21,7 @@ The wrapper can be run with:
 	./tools/testing/kunit/kunit.py run
 
 For more information on this wrapper (also called kunit_tool) check out the
-:doc:`kunit-tool` page.
+Documentation/dev-tools/kunit/kunit-tool.rst page.
 
 Creating a .kunitconfig
 -----------------------
@@ -234,7 +234,7 @@ Congrats! You just wrote your first KUnit test!
 
 Next Steps
 ==========
-*   Check out the :doc:`tips` page for tips on
+*   Check out the Documentation/dev-tools/kunit/tips.rst page for tips on
     writing idiomatic KUnit tests.
 *   Optional: see the :doc:`usage` page for a more
     in-depth explanation of KUnit.
diff --git a/Documentation/dev-tools/kunit/tips.rst b/Documentation/dev-tools/kunit/tips.rst
index 8d8c238f7f79..492d2ded2f5a 100644
--- a/Documentation/dev-tools/kunit/tips.rst
+++ b/Documentation/dev-tools/kunit/tips.rst
@@ -125,7 +125,8 @@ Here's a slightly in-depth example of how one could implement "mocking":
 
 
 Note: here we're able to get away with using ``test->priv``, but if you wanted
-something more flexible you could use a named ``kunit_resource``, see :doc:`api/test`.
+something more flexible you could use a named ``kunit_resource``, see
+Documentation/dev-tools/kunit/api/test.rst.
 
 Failing the current test
 ------------------------
@@ -185,5 +186,5 @@ Alternatively, one can take full control over the error message by using ``KUNIT
 
 Next Steps
 ==========
-*   Optional: see the :doc:`usage` page for a more
+*   Optional: see the Documentation/dev-tools/kunit/usage.rst page for a more
     in-depth explanation of KUnit.
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index 650f99590df5..3ee7ab91f712 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -10,7 +10,7 @@ understand it. This guide assumes a working knowledge of the Linux kernel and
 some basic knowledge of testing.
 
 For a high level introduction to KUnit, including setting up KUnit for your
-project, see :doc:`start`.
+project, see Documentation/dev-tools/kunit/start.rst.
 
 Organization of this document
 =============================
@@ -99,7 +99,8 @@ violated; however, the test will continue running, potentially trying other
 expectations until the test case ends or is otherwise terminated. This is as
 opposed to *assertions* which are discussed later.
 
-To learn about more expectations supported by KUnit, see :doc:`api/test`.
+To learn about more expectations supported by KUnit, see
+Documentation/dev-tools/kunit/api/test.rst.
 
 .. note::
    A single test case should be pretty short, pretty easy to understand,
@@ -216,7 +217,8 @@ test suite in a special linker section so that it can be run by KUnit either
 after late_init, or when the test module is loaded (depending on whether the
 test was built in or not).
 
-For more information on these types of things see the :doc:`api/test`.
+For more information on these types of things see the
+Documentation/dev-tools/kunit/api/test.rst.
 
 Common Patterns
 ===============
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (9 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 10/29] docs: dev-tools: kunit: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16 22:08   ` Rob Herring
  2021-06-16  6:27 ` [PATCH v2 12/29] docs: doc-guide: " Mauro Carvalho Chehab
                   ` (18 subsequent siblings)
  29 siblings, 1 reply; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Nícolas F. R. A. Prado,
	Geert Uytterhoeven, Rob Herring, devicetree, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../devicetree/bindings/submitting-patches.rst        | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst
index 104fa8fb2c17..8087780f1685 100644
--- a/Documentation/devicetree/bindings/submitting-patches.rst
+++ b/Documentation/devicetree/bindings/submitting-patches.rst
@@ -7,8 +7,8 @@ Submitting Devicetree (DT) binding patches
 I. For patch submitters
 =======================
 
-  0) Normal patch submission rules from Documentation/process/submitting-patches.rst
-     applies.
+  0) Normal patch submission rules from
+     Documentation/process/submitting-patches.rst applies.
 
   1) The Documentation/ and include/dt-bindings/ portion of the patch should
      be a separate patch. The preferred subject prefix for binding patches is::
@@ -25,8 +25,8 @@ I. For patch submitters
 
        make dt_binding_check
 
-     See Documentation/devicetree/bindings/writing-schema.rst for more details about
-     schema and tools setup.
+     See Documentation/devicetree/bindings/writing-schema.rst for more details
+     about schema and tools setup.
 
   3) DT binding files should be dual licensed. The preferred license tag is
      (GPL-2.0-only OR BSD-2-Clause).
@@ -84,7 +84,8 @@ II. For kernel maintainers
 III. Notes
 ==========
 
-  0) Please see :doc:`ABI` for details regarding devicetree ABI.
+  0) Please see Documentation/devicetree/bindings/ABI.rst for details
+     regarding devicetree ABI.
 
   1) This document is intended as a general familiarization with the process as
      decided at the 2013 Kernel Summit.  When in doubt, the current word of the
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 12/29] docs: doc-guide: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (10 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 13/29] docs: driver-api: " Mauro Carvalho Chehab
                   ` (17 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/doc-guide/contributing.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/doc-guide/contributing.rst b/Documentation/doc-guide/contributing.rst
index 67ee3691f91f..207fd93d7c80 100644
--- a/Documentation/doc-guide/contributing.rst
+++ b/Documentation/doc-guide/contributing.rst
@@ -237,10 +237,10 @@ We have been trying to improve the situation through the creation of
 a set of "books" that group documentation for specific readers.  These
 include:
 
- - :doc:`../admin-guide/index`
- - :doc:`../core-api/index`
- - :doc:`../driver-api/index`
- - :doc:`../userspace-api/index`
+ - Documentation/admin-guide/index.rst
+ - Documentation/core-api/index.rst
+ - Documentation/driver-api/index.rst
+ - Documentation/userspace-api/index.rst
 
 As well as this book on documentation itself.
 
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 13/29] docs: driver-api: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (11 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 12/29] docs: doc-guide: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 14/29] docs: driver-api: gpio: using-gpio.rst: " Mauro Carvalho Chehab
                   ` (16 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/driver-api/ioctl.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/driver-api/ioctl.rst b/Documentation/driver-api/ioctl.rst
index c455db0e1627..8593cc172f0c 100644
--- a/Documentation/driver-api/ioctl.rst
+++ b/Documentation/driver-api/ioctl.rst
@@ -34,7 +34,7 @@ _IO/_IOR/_IOW/_IOWR
 
 type
    An 8-bit number, often a character literal, specific to a subsystem
-   or driver, and listed in :doc:`../userspace-api/ioctl/ioctl-number`
+   or driver, and listed in Documentation/userspace-api/ioctl/ioctl-number.rst
 
 nr
   An 8-bit number identifying the specific command, unique for a give
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 14/29] docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (12 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 13/29] docs: driver-api: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-25 10:37   ` Bartosz Golaszewski
  2021-06-16  6:27 ` [PATCH v2 15/29] docs: driver-api: surface_aggregator: " Mauro Carvalho Chehab
                   ` (15 subsequent siblings)
  29 siblings, 1 reply; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Bartosz Golaszewski, Linus Walleij,
	linux-gpio, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/driver-api/gpio/using-gpio.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/driver-api/gpio/using-gpio.rst b/Documentation/driver-api/gpio/using-gpio.rst
index dda069444032..64c8d3f76c3a 100644
--- a/Documentation/driver-api/gpio/using-gpio.rst
+++ b/Documentation/driver-api/gpio/using-gpio.rst
@@ -9,13 +9,13 @@ with them.
 
 For examples of already existing generic drivers that will also be good
 examples for any other kernel drivers you want to author, refer to
-:doc:`drivers-on-gpio`
+Documentation/driver-api/gpio/drivers-on-gpio.rst
 
 For any kind of mass produced system you want to support, such as servers,
 laptops, phones, tablets, routers, and any consumer or office or business goods
 using appropriate kernel drivers is paramount. Submit your code for inclusion
 in the upstream Linux kernel when you feel it is mature enough and you will get
-help to refine it, see :doc:`../../process/submitting-patches`.
+help to refine it, see Documentation/process/submitting-patches.rst.
 
 In Linux GPIO lines also have a userspace ABI.
 
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 15/29] docs: driver-api: surface_aggregator: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (13 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 14/29] docs: driver-api: gpio: using-gpio.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 16/29] docs: driver-api: usb: " Mauro Carvalho Chehab
                   ` (14 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Hans de Goede, Maximilian Luz, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../surface_aggregator/clients/index.rst          |  3 ++-
 .../driver-api/surface_aggregator/internal.rst    | 15 ++++++++-------
 .../driver-api/surface_aggregator/overview.rst    |  6 ++++--
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/Documentation/driver-api/surface_aggregator/clients/index.rst b/Documentation/driver-api/surface_aggregator/clients/index.rst
index 98ea9946b8a2..30160513afa5 100644
--- a/Documentation/driver-api/surface_aggregator/clients/index.rst
+++ b/Documentation/driver-api/surface_aggregator/clients/index.rst
@@ -5,7 +5,8 @@ Client Driver Documentation
 ===========================
 
 This is the documentation for client drivers themselves. Refer to
-:doc:`../client` for documentation on how to write client drivers.
+Documentation/driver-api/surface_aggregator/client.rst for documentation
+on how to write client drivers.
 
 .. toctree::
    :maxdepth: 1
diff --git a/Documentation/driver-api/surface_aggregator/internal.rst b/Documentation/driver-api/surface_aggregator/internal.rst
index 72704734982a..8c7c80c9f418 100644
--- a/Documentation/driver-api/surface_aggregator/internal.rst
+++ b/Documentation/driver-api/surface_aggregator/internal.rst
@@ -87,10 +87,11 @@ native SSAM devices, i.e. devices that are not defined in ACPI and not
 implemented as platform devices, via |ssam_device| and |ssam_device_driver|
 simplify management of client devices and client drivers.
 
-Refer to :doc:`client` for documentation regarding the client device/driver
-API and interface options for other kernel drivers. It is recommended to
-familiarize oneself with that chapter and the :doc:`ssh` before continuing
-with the architectural overview below.
+Refer to Documentation/driver-api/surface_aggregator/client.rst for
+documentation regarding the client device/driver API and interface options
+for other kernel drivers. It is recommended to familiarize oneself with
+that chapter and the Documentation/driver-api/surface_aggregator/ssh.rst
+before continuing with the architectural overview below.
 
 
 Packet Transport Layer
@@ -190,9 +191,9 @@ with success on the transmitter thread.
 
 Transmission of sequenced packets is limited by the number of concurrently
 pending packets, i.e. a limit on how many packets may be waiting for an ACK
-from the EC in parallel. This limit is currently set to one (see :doc:`ssh`
-for the reasoning behind this). Control packets (i.e. ACK and NAK) can
-always be transmitted.
+from the EC in parallel. This limit is currently set to one (see
+Documentation/driver-api/surface_aggregator/ssh.rst for the reasoning behind
+this). Control packets (i.e. ACK and NAK) can always be transmitted.
 
 Receiver Thread
 ---------------
diff --git a/Documentation/driver-api/surface_aggregator/overview.rst b/Documentation/driver-api/surface_aggregator/overview.rst
index 1e9d57e50063..26415e1ab7da 100644
--- a/Documentation/driver-api/surface_aggregator/overview.rst
+++ b/Documentation/driver-api/surface_aggregator/overview.rst
@@ -73,5 +73,7 @@ being a direct response to a previous request. We may also refer to requests
 without response as commands. In general, events need to be enabled via one
 of multiple dedicated requests before they are sent by the EC.
 
-See :doc:`ssh` for a more technical protocol documentation and
-:doc:`internal` for an overview of the internal driver architecture.
+See Documentation/driver-api/surface_aggregator/ssh.rst for a
+more technical protocol documentation and
+Documentation/driver-api/surface_aggregator/internal.rst for an
+overview of the internal driver architecture.
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 16/29] docs: driver-api: usb: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (14 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 15/29] docs: driver-api: surface_aggregator: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 17/29] docs: firmware-guide: acpi: " Mauro Carvalho Chehab
                   ` (13 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/driver-api/usb/dma.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/driver-api/usb/dma.rst b/Documentation/driver-api/usb/dma.rst
index 2b3dbd3265b4..d32c27e11b90 100644
--- a/Documentation/driver-api/usb/dma.rst
+++ b/Documentation/driver-api/usb/dma.rst
@@ -10,7 +10,7 @@ API overview
 
 The big picture is that USB drivers can continue to ignore most DMA issues,
 though they still must provide DMA-ready buffers (see
-:doc:`/core-api/dma-api-howto`).  That's how they've worked through
+Documentation/core-api/dma-api-howto.rst).  That's how they've worked through
 the 2.4 (and earlier) kernels, or they can now be DMA-aware.
 
 DMA-aware usb drivers:
@@ -60,7 +60,7 @@ and effects like cache-trashing can impose subtle penalties.
   force a consistent memory access ordering by using memory barriers.  It's
   not using a streaming DMA mapping, so it's good for small transfers on
   systems where the I/O would otherwise thrash an IOMMU mapping.  (See
-  :doc:`/core-api/dma-api-howto` for definitions of "coherent" and
+  Documentation/core-api/dma-api-howto.rst for definitions of "coherent" and
   "streaming" DMA mappings.)
 
   Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
@@ -91,7 +91,7 @@ Working with existing buffers
 Existing buffers aren't usable for DMA without first being mapped into the
 DMA address space of the device.  However, most buffers passed to your
 driver can safely be used with such DMA mapping.  (See the first section
-of :doc:`/core-api/dma-api-howto`, titled "What memory is DMA-able?")
+of Documentation/core-api/dma-api-howto.rst, titled "What memory is DMA-able?")
 
 - When you're using scatterlists, you can map everything at once.  On some
   systems, this kicks in an IOMMU and turns the scatterlists into single
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 17/29] docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (15 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 16/29] docs: driver-api: usb: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:55   ` Sakari Ailus
  2021-06-16  6:27 ` [PATCH v2 18/29] docs: i2c: " Mauro Carvalho Chehab
                   ` (12 subsequent siblings)
  29 siblings, 1 reply; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Alexander A. Klimov, Rafael J. Wysocki,
	Len Brown, Sakari Ailus, Vishal Verma, linux-acpi, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../firmware-guide/acpi/dsd/data-node-references.rst       | 3 ++-
 Documentation/firmware-guide/acpi/dsd/graph.rst            | 2 +-
 Documentation/firmware-guide/acpi/enumeration.rst          | 7 ++++---
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/firmware-guide/acpi/dsd/data-node-references.rst b/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index 9b17dc77d18c..b7ad47df49de 100644
--- a/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ b/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -79,7 +79,8 @@ the ANOD object which is also the final target node of the reference.
 	    })
 	}
 
-Please also see a graph example in :doc:`graph`.
+Please also see a graph example in
+Documentation/firmware-guide/acpi/dsd/graph.rst.
 
 References
 ==========
diff --git a/Documentation/firmware-guide/acpi/dsd/graph.rst b/Documentation/firmware-guide/acpi/dsd/graph.rst
index 7072db801aeb..4341299aa937 100644
--- a/Documentation/firmware-guide/acpi/dsd/graph.rst
+++ b/Documentation/firmware-guide/acpi/dsd/graph.rst
@@ -174,4 +174,4 @@ References
     referenced 2016-10-04.
 
 [7] _DSD Device Properties Usage Rules.
-    :doc:`../DSD-properties-rules`
+    Documentation/firmware-guide/acpi/DSD-properties-rules.rst
diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst
index 9f0d5c854fa4..18074eb71860 100644
--- a/Documentation/firmware-guide/acpi/enumeration.rst
+++ b/Documentation/firmware-guide/acpi/enumeration.rst
@@ -339,8 +339,8 @@ a code like this::
 There are also devm_* versions of these functions which release the
 descriptors once the device is released.
 
-See Documentation/firmware-guide/acpi/gpio-properties.rst for more information about the
-_DSD binding related to GPIOs.
+See Documentation/firmware-guide/acpi/gpio-properties.rst for more information
+about the _DSD binding related to GPIOs.
 
 MFD devices
 ===========
@@ -460,7 +460,8 @@ the _DSD of the device object itself or the _DSD of its ancestor in the
 Otherwise, the _DSD itself is regarded as invalid and therefore the "compatible"
 property returned by it is meaningless.
 
-Refer to :doc:`DSD-properties-rules` for more information.
+Refer to Documentation/firmware-guide/acpi/DSD-properties-rules.rst for more
+information.
 
 PCI hierarchy representation
 ============================
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 18/29] docs: i2c: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (16 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 17/29] docs: firmware-guide: acpi: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 19/29] docs: kernel-hacking: hacking.rst: " Mauro Carvalho Chehab
                   ` (11 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Wolfram Sang, linux-i2c, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/i2c/instantiating-devices.rst | 2 +-
 Documentation/i2c/old-module-parameters.rst | 3 ++-
 Documentation/i2c/smbus-protocol.rst        | 4 ++--
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/Documentation/i2c/instantiating-devices.rst b/Documentation/i2c/instantiating-devices.rst
index e558e0a77e0c..890c9360ce19 100644
--- a/Documentation/i2c/instantiating-devices.rst
+++ b/Documentation/i2c/instantiating-devices.rst
@@ -59,7 +59,7 @@ Declare the I2C devices via ACPI
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 ACPI can also describe I2C devices. There is special documentation for this
-which is currently located at :doc:`../firmware-guide/acpi/enumeration`.
+which is currently located at Documentation/firmware-guide/acpi/enumeration.rst.
 
 
 Declare the I2C devices in board files
diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst
index 38e55829dee8..b08b6daabce9 100644
--- a/Documentation/i2c/old-module-parameters.rst
+++ b/Documentation/i2c/old-module-parameters.rst
@@ -17,7 +17,8 @@ address), ``force`` (to forcibly attach the driver to a given device) and
 With the conversion of the I2C subsystem to the standard device driver
 binding model, it became clear that these per-module parameters were no
 longer needed, and that a centralized implementation was possible. The new,
-sysfs-based interface is described in :doc:`instantiating-devices`, section
+sysfs-based interface is described in
+Documentation/i2c/instantiating-devices.rst, section
 "Method 4: Instantiate from user-space".
 
 Below is a mapping from the old module parameters to the new interface.
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 64689d19dd51..9e07e6bbe6a3 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -27,8 +27,8 @@ a different protocol operation entirely.
 Each transaction type corresponds to a functionality flag. Before calling a
 transaction function, a device driver should always check (just once) for
 the corresponding functionality flag to ensure that the underlying I2C
-adapter supports the transaction in question. See :doc:`functionality` for
-the details.
+adapter supports the transaction in question. See
+Documentation/i2c/functionality.rst for the details.
 
 
 Key to symbols
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 19/29] docs: kernel-hacking: hacking.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (17 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 18/29] docs: i2c: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 20/29] docs: networking: devlink: " Mauro Carvalho Chehab
                   ` (10 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Joe Pater, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/kernel-hacking/hacking.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/kernel-hacking/hacking.rst b/Documentation/kernel-hacking/hacking.rst
index 451523424942..df65c19aa7df 100644
--- a/Documentation/kernel-hacking/hacking.rst
+++ b/Documentation/kernel-hacking/hacking.rst
@@ -601,7 +601,7 @@ Defined in ``include/linux/export.h``
 
 This is the variant of `EXPORT_SYMBOL()` that allows specifying a symbol
 namespace. Symbol Namespaces are documented in
-:doc:`../core-api/symbol-namespaces`
+Documentation/core-api/symbol-namespaces.rst
 
 :c:func:`EXPORT_SYMBOL_NS_GPL()`
 --------------------------------
@@ -610,7 +610,7 @@ Defined in ``include/linux/export.h``
 
 This is the variant of `EXPORT_SYMBOL_GPL()` that allows specifying a symbol
 namespace. Symbol Namespaces are documented in
-:doc:`../core-api/symbol-namespaces`
+Documentation/core-api/symbol-namespaces.rst
 
 Routines and Conventions
 ========================
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 20/29] docs: networking: devlink: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (18 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 19/29] docs: kernel-hacking: hacking.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: " Mauro Carvalho Chehab
                   ` (9 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
	Jiri Pirko, linux-kernel, netdev

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/networking/devlink/devlink-region.rst | 2 +-
 Documentation/networking/devlink/devlink-trap.rst   | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/devlink/devlink-region.rst b/Documentation/networking/devlink/devlink-region.rst
index 3654c3e9658f..58fe95e9a49d 100644
--- a/Documentation/networking/devlink/devlink-region.rst
+++ b/Documentation/networking/devlink/devlink-region.rst
@@ -22,7 +22,7 @@ The major benefit to creating a region is to provide access to internal
 address regions that are otherwise inaccessible to the user.
 
 Regions may also be used to provide an additional way to debug complex error
-states, but see also :doc:`devlink-health`
+states, but see also Documentation/networking/devlink/devlink-health.rst
 
 Regions may optionally support capturing a snapshot on demand via the
 ``DEVLINK_CMD_REGION_NEW`` netlink message. A driver wishing to allow
diff --git a/Documentation/networking/devlink/devlink-trap.rst b/Documentation/networking/devlink/devlink-trap.rst
index 935b6397e8cf..efa5f7f42c88 100644
--- a/Documentation/networking/devlink/devlink-trap.rst
+++ b/Documentation/networking/devlink/devlink-trap.rst
@@ -495,8 +495,8 @@ help debug packet drops caused by these exceptions. The following list includes
 links to the description of driver-specific traps registered by various device
 drivers:
 
-  * :doc:`netdevsim`
-  * :doc:`mlxsw`
+  * Documentation/networking/devlink/netdevsim.rst
+  * Documentation/networking/devlink/mlxsw.rst
 
 .. _Generic-Packet-Trap-Groups:
 
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (19 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 20/29] docs: networking: devlink: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 22/29] docs: PCI: pci.rst: " Mauro Carvalho Chehab
                   ` (8 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Bjorn Helgaas, Kishon Vijay Abraham I,
	Lorenzo Pieralisi, linux-kernel, linux-pci

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/PCI/endpoint/pci-endpoint-cfs.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/PCI/endpoint/pci-endpoint-cfs.rst b/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
index 696f8eeb4738..db609b97ad58 100644
--- a/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
+++ b/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
@@ -125,4 +125,4 @@ all the EPF devices are created and linked with the EPC device.
 						| interrupt_pin
 						| function
 
-[1] :doc:`pci-endpoint`
+[1] Documentation/PCI/endpoint/pci-endpoint.rst
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 22/29] docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (20 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16 14:17   ` Bjorn Helgaas
  2021-06-16  6:27 ` [PATCH v2 23/29] docs: process: submitting-patches.rst: " Mauro Carvalho Chehab
                   ` (7 subsequent siblings)
  29 siblings, 1 reply; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Bjorn Helgaas, linux-kernel, linux-pci

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/PCI/pci.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
index 814b40f8360b..fa651e25d98c 100644
--- a/Documentation/PCI/pci.rst
+++ b/Documentation/PCI/pci.rst
@@ -265,7 +265,7 @@ Set the DMA mask size
 ---------------------
 .. note::
    If anything below doesn't make sense, please refer to
-   :doc:`/core-api/dma-api`. This section is just a reminder that
+   Documentation/core-api/dma-api.rst. This section is just a reminder that
    drivers need to indicate DMA capabilities of the device and is not
    an authoritative source for DMA interfaces.
 
@@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
 Setup shared control data
 -------------------------
 Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
-memory.  See :doc:`/core-api/dma-api` for a full description of
+memory.  See Documentation/core-api/dma-api.rst for a full description of
 the DMA APIs. This section is just a reminder that it needs to be done
 before enabling DMA on the device.
 
@@ -421,7 +421,7 @@ owners if there is one.
 
 Then clean up "consistent" buffers which contain the control data.
 
-See :doc:`/core-api/dma-api` for details on unmapping interfaces.
+See Documentation/core-api/dma-api.rst for details on unmapping interfaces.
 
 
 Unregister from other subsystems
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 23/29] docs: process: submitting-patches.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (21 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 22/29] docs: PCI: pci.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 24/29] docs: security: landlock.rst: " Mauro Carvalho Chehab
                   ` (6 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Borislav Petkov, Drew DeVault,
	Greg Kroah-Hartman, Krzysztof Kozlowski, Lee Jones, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/process/submitting-patches.rst | 32 +++++++++-----------
 1 file changed, 15 insertions(+), 17 deletions(-)

diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
index c66a19201deb..0852bcf73630 100644
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -10,10 +10,11 @@ can greatly increase the chances of your change being accepted.
 
 This document contains a large number of suggestions in a relatively terse
 format.  For detailed information on how the kernel development process
-works, see :doc:`development-process`. Also, read :doc:`submit-checklist`
+works, see Documentation/process/development-process.rst. Also, read
+Documentation/process/submit-checklist.rst
 for a list of items to check before submitting code.  If you are submitting
-a driver, also read :doc:`submitting-drivers`; for device tree binding patches,
-read :doc:`submitting-patches`.
+a driver, also read Documentation/process/submitting-drivers.rst; for device
+tree binding patches, read Documentation/process/submitting-patches.rst.
 
 This documentation assumes that you're using ``git`` to prepare your patches.
 If you're unfamiliar with ``git``, you would be well-advised to learn how to
@@ -178,8 +179,7 @@ Style-check your changes
 ------------------------
 
 Check your patch for basic style violations, details of which can be
-found in
-:ref:`Documentation/process/coding-style.rst <codingstyle>`.
+found in Documentation/process/coding-style.rst.
 Failure to do so simply wastes
 the reviewers time and will get your patch rejected, probably
 without even being read.
@@ -238,7 +238,7 @@ If you have a patch that fixes an exploitable security bug, send that patch
 to security@kernel.org.  For severe bugs, a short embargo may be considered
 to allow distributors to get the patch out to users; in such cases,
 obviously, the patch should not be sent to any public lists. See also
-:doc:`/admin-guide/security-bugs`.
+Documentation/admin-guide/security-bugs.rst.
 
 Patches that fix a severe bug in a released kernel should be directed
 toward the stable maintainers by putting a line like this::
@@ -246,9 +246,8 @@ toward the stable maintainers by putting a line like this::
   Cc: stable@vger.kernel.org
 
 into the sign-off area of your patch (note, NOT an email recipient).  You
-should also read
-:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
-in addition to this file.
+should also read Documentation/process/stable-kernel-rules.rst
+in addition to this document.
 
 If changes affect userland-kernel interfaces, please send the MAN-PAGES
 maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at
@@ -305,8 +304,8 @@ decreasing the likelihood of your MIME-attached change being accepted.
 Exception:  If your mailer is mangling patches then someone may ask
 you to re-send them using MIME.
 
-See :doc:`/process/email-clients` for hints about configuring your e-mail
-client so that it sends your patches untouched.
+See Documentation/process/email-clients.rst for hints about configuring
+your e-mail client so that it sends your patches untouched.
 
 Respond to review comments
 --------------------------
@@ -324,7 +323,7 @@ for their time.  Code review is a tiring and time-consuming process, and
 reviewers sometimes get grumpy.  Even in that case, though, respond
 politely and address the problems they have pointed out.
 
-See :doc:`email-clients` for recommendations on email
+See Documentation/process/email-clients.rst for recommendations on email
 clients and mailing list etiquette.
 
 
@@ -562,10 +561,10 @@ method for indicating a bug fixed by the patch. See :ref:`describe_changes`
 for more details.
 
 Note: Attaching a Fixes: tag does not subvert the stable kernel rules
-process nor the requirement to Cc: stable@vger.kernel.org on all stable 
+process nor the requirement to Cc: stable@vger.kernel.org on all stable
 patch candidates. For more information, please read
-:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
-     
+Documentation/process/stable-kernel-rules.rst.
+
 .. _the_canonical_patch_format:
 
 The canonical patch format
@@ -824,8 +823,7 @@ Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
 NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
   <https://lore.kernel.org/r/20050711.125305.08322243.davem@davemloft.net>
 
-Kernel Documentation/process/coding-style.rst:
-  :ref:`Documentation/process/coding-style.rst <codingstyle>`
+Kernel Documentation/process/coding-style.rst
 
 Linus Torvalds's mail on the canonical patch format:
   <https://lore.kernel.org/r/Pine.LNX.4.58.0504071023190.28951@ppc970.osdl.org>
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 24/29] docs: security: landlock.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (22 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 23/29] docs: process: submitting-patches.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 25/29] docs: trace: coresight: coresight.rst: " Mauro Carvalho Chehab
                   ` (5 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mickaël Salaün, linux-kernel,
	linux-security-module

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/security/landlock.rst | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/security/landlock.rst b/Documentation/security/landlock.rst
index 2e84925ae971..3df68cb1d10f 100644
--- a/Documentation/security/landlock.rst
+++ b/Documentation/security/landlock.rst
@@ -25,7 +25,8 @@ Any user can enforce Landlock rulesets on their processes.  They are merged and
 evaluated according to the inherited ones in a way that ensures that only more
 constraints can be added.
 
-User space documentation can be found here: :doc:`/userspace-api/landlock`.
+User space documentation can be found here:
+Documentation/userspace-api/landlock.rst.
 
 Guiding principles for safe access controls
 ===========================================
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 25/29] docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (23 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 24/29] docs: security: landlock.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-17 15:03   ` Mathieu Poirier
  2021-06-16  6:27 ` [PATCH v2 26/29] docs: trace: ftrace.rst: " Mauro Carvalho Chehab
                   ` (4 subsequent siblings)
  29 siblings, 1 reply; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Leo Yan, Mathieu Poirier, Mike Leach,
	Suzuki K Poulose, coresight, linux-arm-kernel, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/trace/coresight/coresight.rst | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst
index 169749efd8d1..1ec8dc35b1d8 100644
--- a/Documentation/trace/coresight/coresight.rst
+++ b/Documentation/trace/coresight/coresight.rst
@@ -315,7 +315,8 @@ intermediate links as required.
 
 Note: ``cti_sys0`` appears in two of the connections lists above.
 CTIs can connect to multiple devices and are arranged in a star topology
-via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details.
+via the CTM. See (Documentation/trace/coresight/coresight-ect.rst)
+[#fourth]_ for further details.
 Looking at this device we see 4 connections::
 
   linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections
@@ -606,7 +607,8 @@ interface provided for that purpose by the generic STM API::
     crw-------    1 root     root       10,  61 Jan  3 18:11 /dev/stm0
     root@genericarmv8:~#
 
-Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_.
+Details on how to use the generic STM API can be found here:
+- Documentation/trace/stm.rst [#second]_.
 
 The CTI & CTM Modules
 ---------------------
@@ -616,7 +618,7 @@ individual CTIs and components, and can propagate these between all CTIs via
 channels on the CTM (Cross Trigger Matrix).
 
 A separate documentation file is provided to explain the use of these devices.
-(:doc:`coresight-ect`) [#fourth]_.
+(Documentation/trace/coresight/coresight-ect.rst) [#fourth]_.
 
 
 .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 26/29] docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (24 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 25/29] docs: trace: coresight: coresight.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 27/29] docs: userspace-api: landlock.rst: " Mauro Carvalho Chehab
                   ` (3 subsequent siblings)
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Ingo Molnar, Steven Rostedt, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/trace/ftrace.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst
index b88c6b79db3e..cfc81e98e0b8 100644
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@@ -40,7 +40,7 @@ See events.rst for more information.
 Implementation Details
 ----------------------
 
-See :doc:`ftrace-design` for details for arch porters and such.
+See Documentation/trace/ftrace-design.rst for details for arch porters and such.
 
 
 The File System
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 27/29] docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (25 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 26/29] docs: trace: ftrace.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-23 12:26   ` Mickaël Salaün
  2021-06-16  6:27 ` [PATCH v2 28/29] docs: virt: kvm: s390-pv-boot.rst: " Mauro Carvalho Chehab
                   ` (2 subsequent siblings)
  29 siblings, 1 reply; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mickaël Salaün, linux-kernel,
	linux-security-module

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/userspace-api/landlock.rst | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/userspace-api/landlock.rst b/Documentation/userspace-api/landlock.rst
index 62c9361a3c7f..f35552ff19ba 100644
--- a/Documentation/userspace-api/landlock.rst
+++ b/Documentation/userspace-api/landlock.rst
@@ -145,7 +145,8 @@ Bind mounts and OverlayFS
 
 Landlock enables to restrict access to file hierarchies, which means that these
 access rights can be propagated with bind mounts (cf.
-:doc:`/filesystems/sharedsubtree`) but not with :doc:`/filesystems/overlayfs`.
+Documentation/filesystems/sharedsubtree.rst) but not with
+Documentation/filesystems/overlayfs.rst.
 
 A bind mount mirrors a source file hierarchy to a destination.  The destination
 hierarchy is then composed of the exact same files, on which Landlock rules can
@@ -170,8 +171,8 @@ Inheritance
 
 Every new thread resulting from a :manpage:`clone(2)` inherits Landlock domain
 restrictions from its parent.  This is similar to the seccomp inheritance (cf.
-:doc:`/userspace-api/seccomp_filter`) or any other LSM dealing with task's
-:manpage:`credentials(7)`.  For instance, one process's thread may apply
+Documentation/userspace-api/seccomp_filter.rst) or any other LSM dealing with
+task's :manpage:`credentials(7)`.  For instance, one process's thread may apply
 Landlock rules to itself, but they will not be automatically applied to other
 sibling threads (unlike POSIX thread credential changes, cf.
 :manpage:`nptl(7)`).
@@ -278,7 +279,7 @@ Memory usage
 ------------
 
 Kernel memory allocated to create rulesets is accounted and can be restricted
-by the :doc:`/admin-guide/cgroup-v1/memory`.
+by the Documentation/admin-guide/cgroup-v1/memory.rst.
 
 Questions and answers
 =====================
@@ -303,7 +304,7 @@ issues, especially when untrusted processes can manipulate them (cf.
 Additional documentation
 ========================
 
-* :doc:`/security/landlock`
+* Documentation/security/landlock.rst
 * https://landlock.io
 
 .. Links
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 28/29] docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (26 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 27/29] docs: userspace-api: landlock.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 29/29] docs: x86: " Mauro Carvalho Chehab
  2021-06-17 19:34 ` [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Jonathan Corbet
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Christian Borntraeger, Claudio Imbrenda,
	Cornelia Huck, David Hildenbrand, Janosch Frank, Paolo Bonzini,
	kvm, linux-kernel

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/virt/kvm/s390-pv-boot.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/virt/kvm/s390-pv-boot.rst b/Documentation/virt/kvm/s390-pv-boot.rst
index ad1f7866c001..73a6083cb5e7 100644
--- a/Documentation/virt/kvm/s390-pv-boot.rst
+++ b/Documentation/virt/kvm/s390-pv-boot.rst
@@ -10,7 +10,7 @@ The memory of Protected Virtual Machines (PVMs) is not accessible to
 I/O or the hypervisor. In those cases where the hypervisor needs to
 access the memory of a PVM, that memory must be made accessible.
 Memory made accessible to the hypervisor will be encrypted. See
-:doc:`s390-pv` for details."
+Documentation/virt/kvm/s390-pv.rst for details."
 
 On IPL (boot) a small plaintext bootloader is started, which provides
 information about the encrypted components and necessary metadata to
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2 29/29] docs: x86: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (27 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 28/29] docs: virt: kvm: s390-pv-boot.rst: " Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-17 19:34 ` [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Jonathan Corbet
  29 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, H. Peter Anvin, Borislav Petkov,
	Ingo Molnar, Thomas Gleixner, linux-kernel, x86, Peter Zijlstra

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/x86/boot.rst | 4 ++--
 Documentation/x86/mtrr.rst | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst
index fc844913dece..894a19897005 100644
--- a/Documentation/x86/boot.rst
+++ b/Documentation/x86/boot.rst
@@ -1343,7 +1343,7 @@ follow::
 In addition to read/modify/write the setup header of the struct
 boot_params as that of 16-bit boot protocol, the boot loader should
 also fill the additional fields of the struct boot_params as
-described in chapter :doc:`zero-page`.
+described in chapter Documentation/x86/zero-page.rst.
 
 After setting up the struct boot_params, the boot loader can load the
 32/64-bit kernel in the same way as that of 16-bit boot protocol.
@@ -1379,7 +1379,7 @@ can be calculated as follows::
 In addition to read/modify/write the setup header of the struct
 boot_params as that of 16-bit boot protocol, the boot loader should
 also fill the additional fields of the struct boot_params as described
-in chapter :doc:`zero-page`.
+in chapter Documentation/x86/zero-page.rst.
 
 After setting up the struct boot_params, the boot loader can load
 64-bit kernel in the same way as that of 16-bit boot protocol, but
diff --git a/Documentation/x86/mtrr.rst b/Documentation/x86/mtrr.rst
index c5b695d75349..9f0b1851771a 100644
--- a/Documentation/x86/mtrr.rst
+++ b/Documentation/x86/mtrr.rst
@@ -28,7 +28,7 @@ are aligned with platform MTRR setup. If MTRRs are only set up by the platform
 firmware code though and the OS does not make any specific MTRR mapping
 requests mtrr_type_lookup() should always return MTRR_TYPE_INVALID.
 
-For details refer to :doc:`pat`.
+For details refer to Documentation/x86/pat.rst.
 
 .. tip::
   On Intel P6 family processors (Pentium Pro, Pentium II and later)
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 17/29] docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 17/29] docs: firmware-guide: acpi: " Mauro Carvalho Chehab
@ 2021-06-16  6:55   ` Sakari Ailus
  0 siblings, 0 replies; 42+ messages in thread
From: Sakari Ailus @ 2021-06-16  6:55 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, Linux Doc Mailing List, Alexander A. Klimov,
	Rafael J. Wysocki, Len Brown, Vishal Verma, linux-acpi,
	linux-kernel

On Wed, Jun 16, 2021 at 08:27:32AM +0200, Mauro Carvalho Chehab wrote:
> The :doc:`foo` tag is auto-generated via automarkup.py.
> So, use the filename at the sources, instead of :doc:`foo`.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>

-- 
Sakari Ailus

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 22/29] docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 22/29] docs: PCI: pci.rst: " Mauro Carvalho Chehab
@ 2021-06-16 14:17   ` Bjorn Helgaas
  0 siblings, 0 replies; 42+ messages in thread
From: Bjorn Helgaas @ 2021-06-16 14:17 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, Linux Doc Mailing List, Bjorn Helgaas,
	linux-kernel, linux-pci

On Wed, Jun 16, 2021 at 08:27:37AM +0200, Mauro Carvalho Chehab wrote:
> The :doc:`foo` tag is auto-generated via automarkup.py.
> So, use the filename at the sources, instead of :doc:`foo`.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

I do still think it would be nice to have a hint in the commit log
about *why* we're doing this.

> ---
>  Documentation/PCI/pci.rst | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
> index 814b40f8360b..fa651e25d98c 100644
> --- a/Documentation/PCI/pci.rst
> +++ b/Documentation/PCI/pci.rst
> @@ -265,7 +265,7 @@ Set the DMA mask size
>  ---------------------
>  .. note::
>     If anything below doesn't make sense, please refer to
> -   :doc:`/core-api/dma-api`. This section is just a reminder that
> +   Documentation/core-api/dma-api.rst. This section is just a reminder that
>     drivers need to indicate DMA capabilities of the device and is not
>     an authoritative source for DMA interfaces.
>  
> @@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
>  Setup shared control data
>  -------------------------
>  Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
> -memory.  See :doc:`/core-api/dma-api` for a full description of
> +memory.  See Documentation/core-api/dma-api.rst for a full description of
>  the DMA APIs. This section is just a reminder that it needs to be done
>  before enabling DMA on the device.
>  
> @@ -421,7 +421,7 @@ owners if there is one.
>  
>  Then clean up "consistent" buffers which contain the control data.
>  
> -See :doc:`/core-api/dma-api` for details on unmapping interfaces.
> +See Documentation/core-api/dma-api.rst for details on unmapping interfaces.
>  
>  
>  Unregister from other subsystems
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 04/29] docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 04/29] docs: admin-guide: hw-vuln: " Mauro Carvalho Chehab
@ 2021-06-16 18:21   ` mark gross
  2021-06-16 20:21     ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 42+ messages in thread
From: mark gross @ 2021-06-16 18:21 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, Linux Doc Mailing List, Heinrich Schuchardt,
	Mark Gross, linux-kernel

On Wed, Jun 16, 2021 at 08:27:19AM +0200, Mauro Carvalho Chehab wrote:
> The :doc:`foo` tag is auto-generated via automarkup.py.
and that is not good why?

> So, use the filename at the sources, instead of :doc:`foo`.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../hw-vuln/special-register-buffer-data-sampling.rst          | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
> index 3b1ce68d2456..966c9b3296ea 100644
> --- a/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
> +++ b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
> @@ -3,7 +3,8 @@
>  SRBDS - Special Register Buffer Data Sampling
>  =============================================
>  
> -SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques to
I thought the point of :doc:`mds` was to insert a tag or link to the mds
document.

> +SRBDS is a hardware vulnerability that allows MDS
> +Documentation/admin-guide/hw-vuln/mds.rst techniques to
will this make a hyper-link in generated HTML docs?

FWIW I'm ok with this change either way.  I just wanted to understand a little
better.

--mark

>  infer values returned from special register accesses.  Special register
>  accesses are accesses to off core registers.  According to Intel's evaluation,
>  the special register reads that have a security expectation of privacy are
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 04/29] docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
  2021-06-16 18:21   ` mark gross
@ 2021-06-16 20:21     ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16 20:21 UTC (permalink / raw)
  To: mark gross
  Cc: Jonathan Corbet, Linux Doc Mailing List, Heinrich Schuchardt,
	linux-kernel

Em Wed, 16 Jun 2021 11:21:28 -0700
mark gross <mgross@linux.intel.com> escreveu:

> On Wed, Jun 16, 2021 at 08:27:19AM +0200, Mauro Carvalho Chehab wrote:
> > The :doc:`foo` tag is auto-generated via automarkup.py.  
> and that is not good why?

Patch 00 contains a little more info:

	https://lore.kernel.org/linux-doc/cover.1623824363.git.mchehab+huawei@kernel.org/T/#t

Basically, some Kernel developers rely on editor features to jump directly
into other files. Using Documentation/foo.rst enable such features.

> 
> > So, use the filename at the sources, instead of :doc:`foo`.
> > 
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> > ---
> >  .../hw-vuln/special-register-buffer-data-sampling.rst          | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
> > index 3b1ce68d2456..966c9b3296ea 100644
> > --- a/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
> > +++ b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
> > @@ -3,7 +3,8 @@
> >  SRBDS - Special Register Buffer Data Sampling
> >  =============================================
> >  
> > -SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques to  
> I thought the point of :doc:`mds` was to insert a tag or link to the mds
> document.
> 
> > +SRBDS is a hardware vulnerability that allows MDS
> > +Documentation/admin-guide/hw-vuln/mds.rst techniques to  
> will this make a hyper-link in generated HTML docs?

It will still generate the same hyper-links in HTML, LaTeX and PDF outputs,
as the automarkup.py extension will convert Documentation/foo.rst into
doc:`foo`.


> 
> FWIW I'm ok with this change either way.  I just wanted to understand a little
> better.
> 
> --mark
> 
> >  infer values returned from special register accesses.  Special register
> >  accesses are accesses to off core registers.  According to Intel's evaluation,
> >  the special register reads that have a security expectation of privacy are
> > -- 
> > 2.31.1
> >   



Thanks,
Mauro

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: " Mauro Carvalho Chehab
@ 2021-06-16 22:08   ` Rob Herring
  2021-06-17  6:38     ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 42+ messages in thread
From: Rob Herring @ 2021-06-16 22:08 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, Linux Doc Mailing List,
	Nícolas F. R. A. Prado, Geert Uytterhoeven, devicetree,
	linux-kernel

On Wed, Jun 16, 2021 at 12:27 AM Mauro Carvalho Chehab
<mchehab+huawei@kernel.org> wrote:
>
> The :doc:`foo` tag is auto-generated via automarkup.py.
> So, use the filename at the sources, instead of :doc:`foo`.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../devicetree/bindings/submitting-patches.rst        | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst
> index 104fa8fb2c17..8087780f1685 100644
> --- a/Documentation/devicetree/bindings/submitting-patches.rst
> +++ b/Documentation/devicetree/bindings/submitting-patches.rst
> @@ -7,8 +7,8 @@ Submitting Devicetree (DT) binding patches
>  I. For patch submitters
>  =======================
>
> -  0) Normal patch submission rules from Documentation/process/submitting-patches.rst
> -     applies.
> +  0) Normal patch submission rules from
> +     Documentation/process/submitting-patches.rst applies.
>
>    1) The Documentation/ and include/dt-bindings/ portion of the patch should
>       be a separate patch. The preferred subject prefix for binding patches is::
> @@ -25,8 +25,8 @@ I. For patch submitters
>
>         make dt_binding_check
>
> -     See Documentation/devicetree/bindings/writing-schema.rst for more details about
> -     schema and tools setup.
> +     See Documentation/devicetree/bindings/writing-schema.rst for more details
> +     about schema and tools setup.

These don't match $subject.

>
>    3) DT binding files should be dual licensed. The preferred license tag is
>       (GPL-2.0-only OR BSD-2-Clause).
> @@ -84,7 +84,8 @@ II. For kernel maintainers
>  III. Notes
>  ==========
>
> -  0) Please see :doc:`ABI` for details regarding devicetree ABI.
> +  0) Please see Documentation/devicetree/bindings/ABI.rst for details
> +     regarding devicetree ABI.

Is this new? You did review my oneliner adding ':doc:' not too long ago.

>
>    1) This document is intended as a general familiarization with the process as
>       decided at the 2013 Kernel Summit.  When in doubt, the current word of the
> --
> 2.31.1
>

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: avoid using ReST :doc:`foo` markup
  2021-06-16 22:08   ` Rob Herring
@ 2021-06-17  6:38     ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 42+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-17  6:38 UTC (permalink / raw)
  To: Rob Herring
  Cc: Jonathan Corbet, Linux Doc Mailing List,
	Nícolas F. R. A. Prado, Geert Uytterhoeven, devicetree,
	linux-kernel

Em Wed, 16 Jun 2021 16:08:05 -0600
Rob Herring <robh+dt@kernel.org> escreveu:

> On Wed, Jun 16, 2021 at 12:27 AM Mauro Carvalho Chehab
> <mchehab+huawei@kernel.org> wrote:
> >
> > The :doc:`foo` tag is auto-generated via automarkup.py.
> > So, use the filename at the sources, instead of :doc:`foo`.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> > ---
> >  .../devicetree/bindings/submitting-patches.rst        | 11 ++++++-----
> >  1 file changed, 6 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst
> > index 104fa8fb2c17..8087780f1685 100644
> > --- a/Documentation/devicetree/bindings/submitting-patches.rst
> > +++ b/Documentation/devicetree/bindings/submitting-patches.rst
> > @@ -7,8 +7,8 @@ Submitting Devicetree (DT) binding patches
> >  I. For patch submitters
> >  =======================
> >
> > -  0) Normal patch submission rules from Documentation/process/submitting-patches.rst
> > -     applies.
> > +  0) Normal patch submission rules from
> > +     Documentation/process/submitting-patches.rst applies.
> >
> >    1) The Documentation/ and include/dt-bindings/ portion of the patch should
> >       be a separate patch. The preferred subject prefix for binding patches is::
> > @@ -25,8 +25,8 @@ I. For patch submitters
> >
> >         make dt_binding_check
> >
> > -     See Documentation/devicetree/bindings/writing-schema.rst for more details about
> > -     schema and tools setup.
> > +     See Documentation/devicetree/bindings/writing-schema.rst for more details
> > +     about schema and tools setup.  
> 
> These don't match $subject.

Well, I just seek for all places where Documentation/* are, and adjusted
them to 80-columns. I'll add a comment. 

> 
> >
> >    3) DT binding files should be dual licensed. The preferred license tag is
> >       (GPL-2.0-only OR BSD-2-Clause).
> > @@ -84,7 +84,8 @@ II. For kernel maintainers
> >  III. Notes
> >  ==========
> >
> > -  0) Please see :doc:`ABI` for details regarding devicetree ABI.
> > +  0) Please see Documentation/devicetree/bindings/ABI.rst for details
> > +     regarding devicetree ABI.  
> 
> Is this new? You did review my oneliner adding ':doc:' not too long ago.

Yes. It is due to some discussion we had upstream:

	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/

While the html/latex/pdf output is identical (as automarkup.py will
convert Documentation/foo.rst into a cross-reference), using full path
names allow developers to jump directly to other documents when they
have the path name.

> 
> >
> >    1) This document is intended as a general familiarization with the process as
> >       decided at the 2013 Kernel Summit.  When in doubt, the current word of the
> > --
> > 2.31.1
> >  



Thanks,
Mauro

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 25/29] docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 25/29] docs: trace: coresight: coresight.rst: " Mauro Carvalho Chehab
@ 2021-06-17 15:03   ` Mathieu Poirier
  0 siblings, 0 replies; 42+ messages in thread
From: Mathieu Poirier @ 2021-06-17 15:03 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, Linux Doc Mailing List, Leo Yan, Mike Leach,
	Suzuki K Poulose, coresight, linux-arm-kernel, linux-kernel

On Wed, Jun 16, 2021 at 08:27:40AM +0200, Mauro Carvalho Chehab wrote:
> The :doc:`foo` tag is auto-generated via automarkup.py.
> So, use the filename at the sources, instead of :doc:`foo`.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/trace/coresight/coresight.rst | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

> diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst
> index 169749efd8d1..1ec8dc35b1d8 100644
> --- a/Documentation/trace/coresight/coresight.rst
> +++ b/Documentation/trace/coresight/coresight.rst
> @@ -315,7 +315,8 @@ intermediate links as required.
>  
>  Note: ``cti_sys0`` appears in two of the connections lists above.
>  CTIs can connect to multiple devices and are arranged in a star topology
> -via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details.
> +via the CTM. See (Documentation/trace/coresight/coresight-ect.rst)
> +[#fourth]_ for further details.
>  Looking at this device we see 4 connections::
>  
>    linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections
> @@ -606,7 +607,8 @@ interface provided for that purpose by the generic STM API::
>      crw-------    1 root     root       10,  61 Jan  3 18:11 /dev/stm0
>      root@genericarmv8:~#
>  
> -Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_.
> +Details on how to use the generic STM API can be found here:
> +- Documentation/trace/stm.rst [#second]_.
>  
>  The CTI & CTM Modules
>  ---------------------
> @@ -616,7 +618,7 @@ individual CTIs and components, and can propagate these between all CTIs via
>  channels on the CTM (Cross Trigger Matrix).
>  
>  A separate documentation file is provided to explain the use of these devices.
> -(:doc:`coresight-ect`) [#fourth]_.
> +(Documentation/trace/coresight/coresight-ect.rst) [#fourth]_.
>  
>  
>  .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
                   ` (28 preceding siblings ...)
  2021-06-16  6:27 ` [PATCH v2 29/29] docs: x86: " Mauro Carvalho Chehab
@ 2021-06-17 19:34 ` Jonathan Corbet
  29 siblings, 0 replies; 42+ messages in thread
From: Jonathan Corbet @ 2021-06-17 19:34 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, bpf, coresight, devicetree,
	kunit-dev, kvm, linux-acpi, linux-arm-kernel, linux-gpio,
	linux-i2c, linux-kselftest, linux-pci, linux-pm,
	linux-security-module, netdev, x86

Mauro Carvalho Chehab <mchehab+huawei@kernel.org> writes:

> (Maintainers bcc, to avoid too many recipient troubles)
>
> As discussed at:
> 	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
>
> It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
> automarkup.py extension should handle it automatically, on most cases.

I've applied the set, thanks.

jon

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 27/29] docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 27/29] docs: userspace-api: landlock.rst: " Mauro Carvalho Chehab
@ 2021-06-23 12:26   ` Mickaël Salaün
  0 siblings, 0 replies; 42+ messages in thread
From: Mickaël Salaün @ 2021-06-23 12:26 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, Linux Doc Mailing List
  Cc: linux-kernel, linux-security-module


On 16/06/2021 08:27, Mauro Carvalho Chehab wrote:
> The :doc:`foo` tag is auto-generated via automarkup.py.
> So, use the filename at the sources, instead of :doc:`foo`.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/userspace-api/landlock.rst | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)

Acked-by: Mickaël Salaün <mic@linux.microsoft.com>

Like others, I think it would be nice to explain the reason of this
change in the commit message, and why it is better than the current way
to do it.

> 
> diff --git a/Documentation/userspace-api/landlock.rst b/Documentation/userspace-api/landlock.rst
> index 62c9361a3c7f..f35552ff19ba 100644
> --- a/Documentation/userspace-api/landlock.rst
> +++ b/Documentation/userspace-api/landlock.rst
> @@ -145,7 +145,8 @@ Bind mounts and OverlayFS
>  
>  Landlock enables to restrict access to file hierarchies, which means that these
>  access rights can be propagated with bind mounts (cf.
> -:doc:`/filesystems/sharedsubtree`) but not with :doc:`/filesystems/overlayfs`.
> +Documentation/filesystems/sharedsubtree.rst) but not with
> +Documentation/filesystems/overlayfs.rst.
>  
>  A bind mount mirrors a source file hierarchy to a destination.  The destination
>  hierarchy is then composed of the exact same files, on which Landlock rules can
> @@ -170,8 +171,8 @@ Inheritance
>  
>  Every new thread resulting from a :manpage:`clone(2)` inherits Landlock domain
>  restrictions from its parent.  This is similar to the seccomp inheritance (cf.
> -:doc:`/userspace-api/seccomp_filter`) or any other LSM dealing with task's
> -:manpage:`credentials(7)`.  For instance, one process's thread may apply
> +Documentation/userspace-api/seccomp_filter.rst) or any other LSM dealing with
> +task's :manpage:`credentials(7)`.  For instance, one process's thread may apply
>  Landlock rules to itself, but they will not be automatically applied to other
>  sibling threads (unlike POSIX thread credential changes, cf.
>  :manpage:`nptl(7)`).
> @@ -278,7 +279,7 @@ Memory usage
>  ------------
>  
>  Kernel memory allocated to create rulesets is accounted and can be restricted
> -by the :doc:`/admin-guide/cgroup-v1/memory`.
> +by the Documentation/admin-guide/cgroup-v1/memory.rst.
>  
>  Questions and answers
>  =====================
> @@ -303,7 +304,7 @@ issues, especially when untrusted processes can manipulate them (cf.
>  Additional documentation
>  ========================
>  
> -* :doc:`/security/landlock`
> +* Documentation/security/landlock.rst
>  * https://landlock.io
>  
>  .. Links
> 

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 14/29] docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 14/29] docs: driver-api: gpio: using-gpio.rst: " Mauro Carvalho Chehab
@ 2021-06-25 10:37   ` Bartosz Golaszewski
  0 siblings, 0 replies; 42+ messages in thread
From: Bartosz Golaszewski @ 2021-06-25 10:37 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, Linux Doc Mailing List, Linus Walleij, linux-gpio, LKML

On Wed, Jun 16, 2021 at 8:27 AM Mauro Carvalho Chehab
<mchehab+huawei@kernel.org> wrote:
>
> The :doc:`foo` tag is auto-generated via automarkup.py.
> So, use the filename at the sources, instead of :doc:`foo`.
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/driver-api/gpio/using-gpio.rst | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/driver-api/gpio/using-gpio.rst b/Documentation/driver-api/gpio/using-gpio.rst
> index dda069444032..64c8d3f76c3a 100644
> --- a/Documentation/driver-api/gpio/using-gpio.rst
> +++ b/Documentation/driver-api/gpio/using-gpio.rst
> @@ -9,13 +9,13 @@ with them.
>
>  For examples of already existing generic drivers that will also be good
>  examples for any other kernel drivers you want to author, refer to
> -:doc:`drivers-on-gpio`
> +Documentation/driver-api/gpio/drivers-on-gpio.rst
>
>  For any kind of mass produced system you want to support, such as servers,
>  laptops, phones, tablets, routers, and any consumer or office or business goods
>  using appropriate kernel drivers is paramount. Submit your code for inclusion
>  in the upstream Linux kernel when you feel it is mature enough and you will get
> -help to refine it, see :doc:`../../process/submitting-patches`.
> +help to refine it, see Documentation/process/submitting-patches.rst.
>
>  In Linux GPIO lines also have a userspace ABI.
>
> --
> 2.31.1
>

Applied, thanks!

Bartosz

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 10/29] docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 10/29] docs: dev-tools: kunit: " Mauro Carvalho Chehab
@ 2021-06-25 21:27   ` Brendan Higgins
  2021-06-25 22:12     ` Jonathan Corbet
  0 siblings, 1 reply; 42+ messages in thread
From: Brendan Higgins @ 2021-06-25 21:27 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, Linux Doc Mailing List, kunit-dev, linux-kernel,
	linux-kselftest, David Gow

On Tue, Jun 15, 2021 at 11:27 PM Mauro Carvalho Chehab
<mchehab+huawei@kernel.org> wrote:
>
> The :doc:`foo` tag is auto-generated via automarkup.py.
> So, use the filename at the sources, instead of :doc:`foo`.
>
> Reviewed-by: David Gow <davidgow@google.com>
> Acked-by: Brendan Higgins <brendanhiggins@google.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Hi, can you please rebase and resend your patch on top of

https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=kunit-fixes

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2 10/29] docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
  2021-06-25 21:27   ` Brendan Higgins
@ 2021-06-25 22:12     ` Jonathan Corbet
  0 siblings, 0 replies; 42+ messages in thread
From: Jonathan Corbet @ 2021-06-25 22:12 UTC (permalink / raw)
  To: Brendan Higgins, Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, kunit-dev, linux-kernel, linux-kselftest,
	David Gow

Brendan Higgins <brendanhiggins@google.com> writes:

> On Tue, Jun 15, 2021 at 11:27 PM Mauro Carvalho Chehab
> <mchehab+huawei@kernel.org> wrote:
>>
>> The :doc:`foo` tag is auto-generated via automarkup.py.
>> So, use the filename at the sources, instead of :doc:`foo`.
>>
>> Reviewed-by: David Gow <davidgow@google.com>
>> Acked-by: Brendan Higgins <brendanhiggins@google.com>
>> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>
> Hi, can you please rebase and resend your patch on top of
>
> https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=kunit-fixes

I applied the whole set a couple of weeks ago, actually, so there
shouldn't be any need for this...

Thanks,

jon

^ permalink raw reply	[flat|nested] 42+ messages in thread

end of thread, other threads:[~2021-06-25 22:12 UTC | newest]

Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 01/29] docs: devices.rst: better reference documentation docs Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 02/29] docs: dev-tools: kunit: don't use a table for docs name Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 03/29] docs: admin-guide: pm: avoid using ReST :doc:`foo` markup Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 04/29] docs: admin-guide: hw-vuln: " Mauro Carvalho Chehab
2021-06-16 18:21   ` mark gross
2021-06-16 20:21     ` Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 05/29] docs: admin-guide: sysctl: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 06/29] docs: block: biodoc.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 07/29] docs: bpf: bpf_lsm.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 08/29] docs: core-api: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 09/29] docs: dev-tools: testing-overview.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 10/29] docs: dev-tools: kunit: " Mauro Carvalho Chehab
2021-06-25 21:27   ` Brendan Higgins
2021-06-25 22:12     ` Jonathan Corbet
2021-06-16  6:27 ` [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: " Mauro Carvalho Chehab
2021-06-16 22:08   ` Rob Herring
2021-06-17  6:38     ` Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 12/29] docs: doc-guide: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 13/29] docs: driver-api: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 14/29] docs: driver-api: gpio: using-gpio.rst: " Mauro Carvalho Chehab
2021-06-25 10:37   ` Bartosz Golaszewski
2021-06-16  6:27 ` [PATCH v2 15/29] docs: driver-api: surface_aggregator: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 16/29] docs: driver-api: usb: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 17/29] docs: firmware-guide: acpi: " Mauro Carvalho Chehab
2021-06-16  6:55   ` Sakari Ailus
2021-06-16  6:27 ` [PATCH v2 18/29] docs: i2c: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 19/29] docs: kernel-hacking: hacking.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 20/29] docs: networking: devlink: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 22/29] docs: PCI: pci.rst: " Mauro Carvalho Chehab
2021-06-16 14:17   ` Bjorn Helgaas
2021-06-16  6:27 ` [PATCH v2 23/29] docs: process: submitting-patches.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 24/29] docs: security: landlock.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 25/29] docs: trace: coresight: coresight.rst: " Mauro Carvalho Chehab
2021-06-17 15:03   ` Mathieu Poirier
2021-06-16  6:27 ` [PATCH v2 26/29] docs: trace: ftrace.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 27/29] docs: userspace-api: landlock.rst: " Mauro Carvalho Chehab
2021-06-23 12:26   ` Mickaël Salaün
2021-06-16  6:27 ` [PATCH v2 28/29] docs: virt: kvm: s390-pv-boot.rst: " Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 29/29] docs: x86: " Mauro Carvalho Chehab
2021-06-17 19:34 ` [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Jonathan Corbet

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).