[PATCH 00/11] Manually convert thermal, crypto and misc-devices to ReST

[PATCH 00/11] Manually convert thermal, crypto and misc-devices to ReST

[Mauro Carvalho Chehab]

Manually convert some files from thermal, crypto and misc-devices
to ReST format.

This patch is against linux-next 20200204 tag.

Mauro Carvalho Chehab (11):
  docs: thermal: convert cpu-idle-cooling.rst to ReST
  docs: crypto: convert asymmetric-keys.txt to ReST
  docs: crypto: convert api-intro.txt to ReST format
  docs: crypto: convert async-tx-api.txt to ReST format
  docs: crypto: descore-readme.txt: convert to ReST format
  docs: misc-devices/spear-pcie-gadget.txt: convert to ReST
  docs: misc-devices/pci-endpoint-test.txt: convert to ReST
  docs: misc-devices/pci-endpoint-test.txt: convert to ReST
  docs: misc-devices/c2port.txt: convert to ReST format
  docs: misc-devices/bh1770glc.txt: convert to ReST
  docs: misc-devices/apds990x.txt: convert to ReST format

 .../crypto/{api-intro.txt => api-intro.rst}   | 186 +++++++------
 ...symmetric-keys.txt => asymmetric-keys.rst} |  91 +++----
 .../{async-tx-api.txt => async-tx-api.rst}    | 253 +++++++++++-------
 ...{descore-readme.txt => descore-readme.rst} | 152 +++++++----
 Documentation/crypto/index.rst                |   5 +
 .../driver-api/thermal/cpu-idle-cooling.rst   |  18 +-
 Documentation/driver-api/thermal/index.rst    |   1 +
 .../{ad525x_dpot.txt => ad525x_dpot.rst}      |  24 +-
 .../{apds990x.txt => apds990x.rst}            |  31 ++-
 .../{bh1770glc.txt => bh1770glc.rst}          |  45 +++-
 .../misc-devices/{c2port.txt => c2port.rst}   |  58 ++--
 Documentation/misc-devices/index.rst          |   6 +
 .../misc-devices/pci-endpoint-test.rst        |  56 ++++
 .../misc-devices/pci-endpoint-test.txt        |  41 ---
 .../misc-devices/spear-pcie-gadget.rst        | 170 ++++++++++++
 .../misc-devices/spear-pcie-gadget.txt        | 130 ---------
 16 files changed, 747 insertions(+), 520 deletions(-)
 rename Documentation/crypto/{api-intro.txt => api-intro.rst} (70%)
 rename Documentation/crypto/{asymmetric-keys.txt => asymmetric-keys.rst} (91%)
 rename Documentation/crypto/{async-tx-api.txt => async-tx-api.rst} (55%)
 rename Documentation/crypto/{descore-readme.txt => descore-readme.rst} (81%)
 rename Documentation/misc-devices/{ad525x_dpot.txt => ad525x_dpot.rst} (85%)
 rename Documentation/misc-devices/{apds990x.txt => apds990x.rst} (86%)
 rename Documentation/misc-devices/{bh1770glc.txt => bh1770glc.rst} (83%)
 rename Documentation/misc-devices/{c2port.txt => c2port.rst} (59%)
 create mode 100644 Documentation/misc-devices/pci-endpoint-test.rst
 delete mode 100644 Documentation/misc-devices/pci-endpoint-test.txt
 create mode 100644 Documentation/misc-devices/spear-pcie-gadget.rst
 delete mode 100644 Documentation/misc-devices/spear-pcie-gadget.txt

-- 
2.24.1

[PATCH 01/11] docs: thermal: convert cpu-idle-cooling.rst to ReST

[Mauro Carvalho Chehab]

Despite being named with .rst extension, this file doesn't
match the ReST standard. It actually causes a crash at
Sphinx:

	Sphinx parallel build error:
	docutils.utils.SystemMessage: /devel/v4l/docs/Documentation/driver-api/thermal/cpu-idle-cooling.rst:69: (SEVERE/4) Unexpected section title.

Add needed markups for it to be properly parsed.

While here, add it to the thermal index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../driver-api/thermal/cpu-idle-cooling.rst    | 18 ++++++++++++------
 Documentation/driver-api/thermal/index.rst     |  1 +
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/Documentation/driver-api/thermal/cpu-idle-cooling.rst b/Documentation/driver-api/thermal/cpu-idle-cooling.rst
index 9f0016ee4cfb..357d2f023605 100644
--- a/Documentation/driver-api/thermal/cpu-idle-cooling.rst
+++ b/Documentation/driver-api/thermal/cpu-idle-cooling.rst
@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+CPU Idle Cooling
+================
+
 
 Situation:
 ----------
@@ -45,7 +51,7 @@ idle state target residency, we lead to dropping the static and the
 dynamic leakage for this period (modulo the energy needed to enter
 this state). So the sustainable power with idle cycles has a linear
 relation with the OPP’s sustainable power and can be computed with a
-coefficient similar to:
+coefficient similar to::
 
 	    Power(IdleCycle) = Coef x Power(OPP)
 
@@ -136,7 +142,7 @@ Power considerations
 --------------------
 
 When we reach the thermal trip point, we have to sustain a specified
-power for a specific temperature but at this time we consume:
+power for a specific temperature but at this time we consume::
 
  Power = Capacitance x Voltage^2 x Frequency x Utilisation
 
@@ -145,7 +151,7 @@ wrong in the system setup). The ‘Capacitance’ and ‘Utilisation’ are a
 fixed value, ‘Voltage’ and the ‘Frequency’ are fixed artificially
 because we don’t want to change the OPP. We can group the
 ‘Capacitance’ and the ‘Utilisation’ into a single term which is the
-‘Dynamic Power Coefficient (Cdyn)’ Simplifying the above, we have:
+‘Dynamic Power Coefficient (Cdyn)’ Simplifying the above, we have::
 
  Pdyn = Cdyn x Voltage^2 x Frequency
 
@@ -154,7 +160,7 @@ in order to target the sustainable power defined in the device
 tree. So with the idle injection mechanism, we want an average power
 (Ptarget) resulting in an amount of time running at full power on a
 specific OPP and idle another amount of time. That could be put in a
-equation:
+equation::
 
  P(opp)target = ((Trunning x (P(opp)running) + (Tidle x P(opp)idle)) /
 			(Trunning + Tidle)
@@ -165,7 +171,7 @@ equation:
 
 At this point if we know the running period for the CPU, that gives us
 the idle injection we need. Alternatively if we have the idle
-injection duration, we can compute the running duration with:
+injection duration, we can compute the running duration with::
 
  Trunning = Tidle / ((P(opp)running / P(opp)target) - 1)
 
@@ -188,7 +194,7 @@ However, in this demonstration we ignore three aspects:
    target residency, otherwise we end up consuming more energy and
    potentially invert the mitigation effect
 
-So the final equation is:
+So the final equation is::
 
  Trunning = (Tidle - Twakeup ) x
 		(((P(opp)dyn + P(opp)static ) - P(opp)target) / P(opp)target )
diff --git a/Documentation/driver-api/thermal/index.rst b/Documentation/driver-api/thermal/index.rst
index 5ba61d19c6ae..4cb0b9b6bfb8 100644
--- a/Documentation/driver-api/thermal/index.rst
+++ b/Documentation/driver-api/thermal/index.rst
@@ -8,6 +8,7 @@ Thermal
    :maxdepth: 1
 
    cpu-cooling-api
+   cpu-idle-cooling
    sysfs-api
    power_allocator
 
-- 
2.24.1

[PATCH 02/11] docs: crypto: convert asymmetric-keys.txt to ReST

[Mauro Carvalho Chehab]

This file is almost compatible with ReST. Just minor changes
were needed:

- Adjust document and titles markups;
- Adjust numbered list markups;
- Add a comments markup for the Contents section;
- Add markups for literal blocks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 ...symmetric-keys.txt => asymmetric-keys.rst} | 91 +++++++++----------
 Documentation/crypto/index.rst                |  1 +
 2 files changed, 44 insertions(+), 48 deletions(-)
 rename Documentation/crypto/{asymmetric-keys.txt => asymmetric-keys.rst} (91%)

diff --git a/Documentation/crypto/asymmetric-keys.txt b/Documentation/crypto/asymmetric-keys.rst
similarity index 91%
rename from Documentation/crypto/asymmetric-keys.txt
rename to Documentation/crypto/asymmetric-keys.rst
index 8763866b11cf..34063f8959fe 100644
--- a/Documentation/crypto/asymmetric-keys.txt
+++ b/Documentation/crypto/asymmetric-keys.rst
@@ -1,8 +1,10 @@
-		=============================================
-		ASYMMETRIC / PUBLIC-KEY CRYPTOGRAPHY KEY TYPE
-		=============================================
+.. SPDX-License-Identifier: GPL-2.0
 
-Contents:
+=============================================
+Asymmetric / Public-key Cryptography Key Type
+=============================================
+
+.. Contents:
 
   - Overview.
   - Key identification.
@@ -13,8 +15,7 @@ Contents:
   - Keyring link restrictions.
 
 
-========
-OVERVIEW
+Overview
 ========
 
 The "asymmetric" key type is designed to be a container for the keys used in
@@ -42,8 +43,7 @@ key, or it may interpret it as a reference to a key held somewhere else in the
 system (for example, a TPM).
 
 
-==================
-KEY IDENTIFICATION
+Key Identification
 ==================
 
 If a key is added with an empty name, the instantiation data parsers are given
@@ -57,49 +57,48 @@ The asymmetric key type's match function can then perform a wider range of
 comparisons than just the straightforward comparison of the description with
 the criterion string:
 
- (1) If the criterion string is of the form "id:<hexdigits>" then the match
+  1) If the criterion string is of the form "id:<hexdigits>" then the match
      function will examine a key's fingerprint to see if the hex digits given
-     after the "id:" match the tail.  For instance:
+     after the "id:" match the tail.  For instance::
 
 	keyctl search @s asymmetric id:5acc2142
 
-     will match a key with fingerprint:
+     will match a key with fingerprint::
 
 	1A00 2040 7601 7889 DE11  882C 3823 04AD 5ACC 2142
 
- (2) If the criterion string is of the form "<subtype>:<hexdigits>" then the
+ 2) If the criterion string is of the form "<subtype>:<hexdigits>" then the
      match will match the ID as in (1), but with the added restriction that
      only keys of the specified subtype (e.g. tpm) will be matched.  For
-     instance:
+     instance::
 
 	keyctl search @s asymmetric tpm:5acc2142
 
 Looking in /proc/keys, the last 8 hex digits of the key fingerprint are
-displayed, along with the subtype:
+displayed, along with the subtype::
 
 	1a39e171 I-----     1 perm 3f010000     0     0 asymmetric modsign.0: DSA 5acc2142 []
 
 
-=========================
-ACCESSING ASYMMETRIC KEYS
+Accessing Asymmetric Keys
 =========================
 
 For general access to asymmetric keys from within the kernel, the following
-inclusion is required:
+inclusion is required::
 
 	#include <crypto/public_key.h>
 
 This gives access to functions for dealing with asymmetric / public keys.
 Three enums are defined there for representing public-key cryptography
-algorithms:
+algorithms::
 
 	enum pkey_algo
 
-digest algorithms used by those:
+digest algorithms used by those::
 
 	enum pkey_hash_algo
 
-and key identifier representations:
+and key identifier representations::
 
 	enum pkey_id_type
 
@@ -110,25 +109,25 @@ PGP-specific metadata, whereas X.509 has arbitrary certificate identifiers.
 
 The operations defined upon a key are:
 
- (1) Signature verification.
+1) Signature verification.
 
 Other operations are possible (such as encryption) with the same key data
 required for verification, but not currently supported, and others
 (eg. decryption and signature generation) require extra key data.
 
 
-SIGNATURE VERIFICATION
+Signature Verification
 ----------------------
 
 An operation is provided to perform cryptographic signature verification, using
-an asymmetric key to provide or to provide access to the public key.
+an asymmetric key to provide or to provide access to the public key::
 
 	int verify_signature(const struct key *key,
 			     const struct public_key_signature *sig);
 
 The caller must have already obtained the key from some source and can then use
 it to check the signature.  The caller must have parsed the signature and
-transferred the relevant bits to the structure pointed to by sig.
+transferred the relevant bits to the structure pointed to by sig::
 
 	struct public_key_signature {
 		u8 *digest;
@@ -159,8 +158,7 @@ data; or -ENOMEM if an allocation can't be performed.  -EINVAL can be returned
 if the key argument is the wrong type or is incompletely set up.
 
 
-=======================
-ASYMMETRIC KEY SUBTYPES
+Asymmetric Key Subtypes
 =======================
 
 Asymmetric keys have a subtype that defines the set of operations that can be
@@ -171,11 +169,11 @@ The subtype is selected by the key data parser and the parser must initialise
 the data required for it.  The asymmetric key retains a reference on the
 subtype module.
 
-The subtype definition structure can be found in:
+The subtype definition structure can be found in::
 
 	#include <keys/asymmetric-subtype.h>
 
-and looks like the following:
+and looks like the following::
 
 	struct asymmetric_key_subtype {
 		struct module		*owner;
@@ -198,39 +196,37 @@ the subtype.  Currently, the name is only used for print statements.
 
 There are a number of operations defined by the subtype:
 
- (1) describe().
+  1) describe().
 
      Mandatory.  This allows the subtype to display something in /proc/keys
      against the key.  For instance the name of the public key algorithm type
      could be displayed.  The key type will display the tail of the key
      identity string after this.
 
- (2) destroy().
+  2) destroy().
 
      Mandatory.  This should free the memory associated with the key.  The
      asymmetric key will look after freeing the fingerprint and releasing the
      reference on the subtype module.
 
- (3) query().
+  3) query().
 
      Mandatory.  This is a function for querying the capabilities of a key.
 
- (4) eds_op().
+  4) eds_op().
 
      Optional.  This is the entry point for the encryption, decryption and
      signature creation operations (which are distinguished by the operation ID
      in the parameter struct).  The subtype may do anything it likes to
      implement an operation, including offloading to hardware.
 
- (5) verify_signature().
+  5) verify_signature().
 
      Optional.  This is the entry point for signature verification.  The
      subtype may do anything it likes to implement an operation, including
      offloading to hardware.
 
-
-==========================
-INSTANTIATION DATA PARSERS
+Instantiation Data Parsers
 ==========================
 
 The asymmetric key type doesn't generally want to store or to deal with a raw
@@ -254,11 +250,11 @@ Examples of blob formats for which parsers could be implemented include:
 During key instantiation each parser in the list is tried until one doesn't
 return -EBADMSG.
 
-The parser definition structure can be found in:
+The parser definition structure can be found in::
 
 	#include <keys/asymmetric-parser.h>
 
-and looks like the following:
+and looks like the following::
 
 	struct asymmetric_key_parser {
 		struct module	*owner;
@@ -273,7 +269,7 @@ the parser.
 There is currently only a single operation defined by the parser, and it is
 mandatory:
 
- (1) parse().
+  1) parse().
 
      This is called to preparse the key from the key creation and update paths.
      In particular, it is called during the key creation _before_ a key is
@@ -282,7 +278,7 @@ mandatory:
 
      The caller passes a pointer to the following struct with all of the fields
      cleared, except for data, datalen and quotalen [see
-     Documentation/security/keys/core.rst].
+     Documentation/security/keys/core.rst]::
 
 	struct key_preparsed_payload {
 		char		*description;
@@ -321,7 +317,7 @@ mandatory:
      public-key algorithm such as RSA and DSA this will likely be a printable
      hex version of the key's fingerprint.
 
-Functions are provided to register and unregister parsers:
+Functions are provided to register and unregister parsers::
 
 	int register_asymmetric_key_parser(struct asymmetric_key_parser *parser);
 	void unregister_asymmetric_key_parser(struct asymmetric_key_parser *subtype);
@@ -330,8 +326,7 @@ Parsers may not have the same name.  The names are otherwise only used for
 displaying in debugging messages.
 
 
-=========================
-KEYRING LINK RESTRICTIONS
+Keyring Link Restrictions
 =========================
 
 Keyrings created from userspace using add_key can be configured to check the
@@ -340,7 +335,7 @@ allowed to link.
 
 Several restriction methods are available:
 
- (1) Restrict using the kernel builtin trusted keyring
+  1) Restrict using the kernel builtin trusted keyring
 
      - Option string used with KEYCTL_RESTRICT_KEYRING:
        - "builtin_trusted"
@@ -350,7 +345,7 @@ Several restriction methods are available:
      rejected.  The ca_keys kernel parameter also affects which keys are used
      for signature verification.
 
- (2) Restrict using the kernel builtin and secondary trusted keyrings
+  2) Restrict using the kernel builtin and secondary trusted keyrings
 
      - Option string used with KEYCTL_RESTRICT_KEYRING:
        - "builtin_and_secondary_trusted"
@@ -361,7 +356,7 @@ Several restriction methods are available:
      kernel parameter also affects which keys are used for signature
      verification.
 
- (3) Restrict using a separate key or keyring
+  3) Restrict using a separate key or keyring
 
      - Option string used with KEYCTL_RESTRICT_KEYRING:
        - "key_or_keyring:<key or keyring serial number>[:chain]"
@@ -378,7 +373,7 @@ Several restriction methods are available:
      certificate in order (starting closest to the root) to a keyring.  For
      instance, one keyring can be populated with links to a set of root
      certificates, with a separate, restricted keyring set up for each
-     certificate chain to be validated:
+     certificate chain to be validated::
 
 	# Create and populate a keyring for root certificates
 	root_id=`keyctl add keyring root-certs "" @s`
@@ -400,7 +395,7 @@ Several restriction methods are available:
      one of the root certificates.
 
      A single keyring can be used to verify a chain of signatures by
-     restricting the keyring after linking the root certificate:
+     restricting the keyring after linking the root certificate::
 
 	# Create a keyring for the certificate chain and add the root
 	chain2_id=`keyctl add keyring chain2 "" @s`
diff --git a/Documentation/crypto/index.rst b/Documentation/crypto/index.rst
index c4ff5d791233..2bcaf422731e 100644
--- a/Documentation/crypto/index.rst
+++ b/Documentation/crypto/index.rst
@@ -18,6 +18,7 @@ for cryptographic use cases, as well as programming examples.
 
    intro
    architecture
+   asymmetric-keys
    devel-algos
    userspace-if
    crypto_engine
-- 
2.24.1

[PATCH 03/11] docs: crypto: convert api-intro.txt to ReST format

[Mauro Carvalho Chehab]

- Change title markups;
- Mark literal blocks;
- Use list markups at authors/credits;
- Add blank lines when needed;
- Remove trailing whitespaces.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../crypto/{api-intro.txt => api-intro.rst}   | 186 ++++++++++--------
 Documentation/crypto/index.rst                |   1 +
 2 files changed, 100 insertions(+), 87 deletions(-)
 rename Documentation/crypto/{api-intro.txt => api-intro.rst} (70%)

diff --git a/Documentation/crypto/api-intro.txt b/Documentation/crypto/api-intro.rst
similarity index 70%
rename from Documentation/crypto/api-intro.txt
rename to Documentation/crypto/api-intro.rst
index 45d943fcae5b..bcff47d42189 100644
--- a/Documentation/crypto/api-intro.txt
+++ b/Documentation/crypto/api-intro.rst
@@ -1,7 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
 
-                    Scatterlist Cryptographic API
-                   
-INTRODUCTION
+=============================
+Scatterlist Cryptographic API
+=============================
+
+Introduction
+============
 
 The Scatterlist Crypto API takes page vectors (scatterlists) as
 arguments, and works directly on pages.  In some cases (e.g. ECB
@@ -13,22 +17,23 @@ so that processing can be applied to paged skb's without the need
 for linearization.
 
 
-DETAILS
+Details
+=======
 
 At the lowest level are algorithms, which register dynamically with the
 API.
 
 'Transforms' are user-instantiated objects, which maintain state, handle all
-of the implementation logic (e.g. manipulating page vectors) and provide an 
-abstraction to the underlying algorithms.  However, at the user 
+of the implementation logic (e.g. manipulating page vectors) and provide an
+abstraction to the underlying algorithms.  However, at the user
 level they are very simple.
 
-Conceptually, the API layering looks like this:
+Conceptually, the API layering looks like this::
 
   [transform api]  (user interface)
   [transform ops]  (per-type logic glue e.g. cipher.c, compress.c)
   [algorithm api]  (for registering algorithms)
-  
+
 The idea is to make the user interface and algorithm registration API
 very simple, while hiding the core logic from both.  Many good ideas
 from existing APIs such as Cryptoapi and Nettle have been adapted for this.
@@ -44,21 +49,21 @@ one block while the former can operate on an arbitrary amount of data,
 subject to block size requirements (i.e., non-stream ciphers can only
 process multiples of blocks).
 
-Here's an example of how to use the API:
+Here's an example of how to use the API::
 
 	#include <crypto/hash.h>
 	#include <linux/err.h>
 	#include <linux/scatterlist.h>
-	
+
 	struct scatterlist sg[2];
 	char result[128];
 	struct crypto_ahash *tfm;
 	struct ahash_request *req;
-	
+
 	tfm = crypto_alloc_ahash("md5", 0, CRYPTO_ALG_ASYNC);
 	if (IS_ERR(tfm))
 		fail();
-		
+
 	/* ... set up the scatterlists ... */
 
 	req = ahash_request_alloc(tfm, GFP_ATOMIC);
@@ -67,18 +72,19 @@ Here's an example of how to use the API:
 
 	ahash_request_set_callback(req, 0, NULL, NULL);
 	ahash_request_set_crypt(req, sg, result, 2);
-	
+
 	if (crypto_ahash_digest(req))
 		fail();
 
 	ahash_request_free(req);
 	crypto_free_ahash(tfm);
 
-    
+
 Many real examples are available in the regression test module (tcrypt.c).
 
 
-DEVELOPER NOTES
+Developer Notes
+===============
 
 Transforms may only be allocated in user context, and cryptographic
 methods may only be called from softirq and user contexts.  For
@@ -91,7 +97,8 @@ size (typically 8 bytes).  This prevents having to do any copying
 across non-aligned page fragment boundaries.
 
 
-ADDING NEW ALGORITHMS
+Adding New Algorithms
+=====================
 
 When submitting a new algorithm for inclusion, a mandatory requirement
 is that at least a few test vectors from known sources (preferably
@@ -119,132 +126,137 @@ Also check the TODO list at the web site listed below to see what people
 might already be working on.
 
 
-BUGS
+Bugs
+====
 
 Send bug reports to:
-linux-crypto@vger.kernel.org
-Cc: Herbert Xu <herbert@gondor.apana.org.au>,
+    linux-crypto@vger.kernel.org
+
+Cc:
+    Herbert Xu <herbert@gondor.apana.org.au>,
     David S. Miller <davem@redhat.com>
 
 
-FURTHER INFORMATION
+Further Information
+===================
 
 For further patches and various updates, including the current TODO
 list, see:
 http://gondor.apana.org.au/~herbert/crypto/
 
 
-AUTHORS
+Authors
+=======
 
-James Morris
-David S. Miller
-Herbert Xu
+- James Morris
+- David S. Miller
+- Herbert Xu
 
 
-CREDITS
+Credits
+=======
 
 The following people provided invaluable feedback during the development
 of the API:
 
-  Alexey Kuznetzov
-  Rusty Russell
-  Herbert Valerio Riedel
-  Jeff Garzik
-  Michael Richardson
-  Andrew Morton
-  Ingo Oeser
-  Christoph Hellwig
+  - Alexey Kuznetzov
+  - Rusty Russell
+  - Herbert Valerio Riedel
+  - Jeff Garzik
+  - Michael Richardson
+  - Andrew Morton
+  - Ingo Oeser
+  - Christoph Hellwig
 
 Portions of this API were derived from the following projects:
-  
+
   Kerneli Cryptoapi (http://www.kerneli.org/)
-    Alexander Kjeldaas
-    Herbert Valerio Riedel
-    Kyle McMartin
-    Jean-Luc Cooke
-    David Bryson
-    Clemens Fruhwirth
-    Tobias Ringstrom
-    Harald Welte
+   - Alexander Kjeldaas
+   - Herbert Valerio Riedel
+   - Kyle McMartin
+   - Jean-Luc Cooke
+   - David Bryson
+   - Clemens Fruhwirth
+   - Tobias Ringstrom
+   - Harald Welte
 
 and;
-  
+
   Nettle (http://www.lysator.liu.se/~nisse/nettle/)
-    Niels Möller
+   - Niels Möller
 
 Original developers of the crypto algorithms:
 
-  Dana L. How (DES)
-  Andrew Tridgell and Steve French (MD4)
-  Colin Plumb (MD5)
-  Steve Reid (SHA1)
-  Jean-Luc Cooke (SHA256, SHA384, SHA512)
-  Kazunori Miyazawa / USAGI (HMAC)
-  Matthew Skala (Twofish)
-  Dag Arne Osvik (Serpent)
-  Brian Gladman (AES)
-  Kartikey Mahendra Bhatt (CAST6)
-  Jon Oberheide (ARC4)
-  Jouni Malinen (Michael MIC)
-  NTT(Nippon Telegraph and Telephone Corporation) (Camellia)
+  - Dana L. How (DES)
+  - Andrew Tridgell and Steve French (MD4)
+  - Colin Plumb (MD5)
+  - Steve Reid (SHA1)
+  - Jean-Luc Cooke (SHA256, SHA384, SHA512)
+  - Kazunori Miyazawa / USAGI (HMAC)
+  - Matthew Skala (Twofish)
+  - Dag Arne Osvik (Serpent)
+  - Brian Gladman (AES)
+  - Kartikey Mahendra Bhatt (CAST6)
+  - Jon Oberheide (ARC4)
+  - Jouni Malinen (Michael MIC)
+  - NTT(Nippon Telegraph and Telephone Corporation) (Camellia)
 
 SHA1 algorithm contributors:
-  Jean-Francois Dive
-  
+  - Jean-Francois Dive
+
 DES algorithm contributors:
-  Raimar Falke
-  Gisle Sælensminde
-  Niels Möller
+  - Raimar Falke
+  - Gisle Sælensminde
+  - Niels Möller
 
 Blowfish algorithm contributors:
-  Herbert Valerio Riedel
-  Kyle McMartin
+  - Herbert Valerio Riedel
+  - Kyle McMartin
 
 Twofish algorithm contributors:
-  Werner Koch
-  Marc Mutz
+  - Werner Koch
+  - Marc Mutz
 
 SHA256/384/512 algorithm contributors:
-  Andrew McDonald
-  Kyle McMartin
-  Herbert Valerio Riedel
-  
+  - Andrew McDonald
+  - Kyle McMartin
+  - Herbert Valerio Riedel
+
 AES algorithm contributors:
-  Alexander Kjeldaas
-  Herbert Valerio Riedel
-  Kyle McMartin
-  Adam J. Richter
-  Fruhwirth Clemens (i586)
-  Linus Torvalds (i586)
+  - Alexander Kjeldaas
+  - Herbert Valerio Riedel
+  - Kyle McMartin
+  - Adam J. Richter
+  - Fruhwirth Clemens (i586)
+  - Linus Torvalds (i586)
 
 CAST5 algorithm contributors:
-  Kartikey Mahendra Bhatt (original developers unknown, FSF copyright).
+  - Kartikey Mahendra Bhatt (original developers unknown, FSF copyright).
 
 TEA/XTEA algorithm contributors:
-  Aaron Grothe
-  Michael Ringe
+  - Aaron Grothe
+  - Michael Ringe
 
 Khazad algorithm contributors:
-  Aaron Grothe
+  - Aaron Grothe
 
 Whirlpool algorithm contributors:
-  Aaron Grothe
-  Jean-Luc Cooke
+  - Aaron Grothe
+  - Jean-Luc Cooke
 
 Anubis algorithm contributors:
-  Aaron Grothe
+  - Aaron Grothe
 
 Tiger algorithm contributors:
-  Aaron Grothe
+  - Aaron Grothe
 
 VIA PadLock contributors:
-  Michal Ludvig
+  - Michal Ludvig
 
 Camellia algorithm contributors:
-  NTT(Nippon Telegraph and Telephone Corporation) (Camellia)
+  - NTT(Nippon Telegraph and Telephone Corporation) (Camellia)
 
 Generic scatterwalk code by Adam J. Richter <adam@yggdrasil.com>
 
 Please send any credits updates or corrections to:
 Herbert Xu <herbert@gondor.apana.org.au>
-
diff --git a/Documentation/crypto/index.rst b/Documentation/crypto/index.rst
index 2bcaf422731e..b2eeab3c8631 100644
--- a/Documentation/crypto/index.rst
+++ b/Documentation/crypto/index.rst
@@ -17,6 +17,7 @@ for cryptographic use cases, as well as programming examples.
    :maxdepth: 2
 
    intro
+   api-intro
    architecture
    asymmetric-keys
    devel-algos
-- 
2.24.1

[PATCH 04/11] docs: crypto: convert async-tx-api.txt to ReST format

[Mauro Carvalho Chehab]

- Place the txt index inside a comment;
- Use title and chapter markups;
- Adjust markups for numbered list;
- Mark literal blocks as such;
- Use tables markup.
- Adjust indentation when needed.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../{async-tx-api.txt => async-tx-api.rst}    | 253 +++++++++++-------
 Documentation/crypto/index.rst                |   2 +
 2 files changed, 151 insertions(+), 104 deletions(-)
 rename Documentation/crypto/{async-tx-api.txt => async-tx-api.rst} (55%)

diff --git a/Documentation/crypto/async-tx-api.txt b/Documentation/crypto/async-tx-api.rst
similarity index 55%
rename from Documentation/crypto/async-tx-api.txt
rename to Documentation/crypto/async-tx-api.rst
index 7bf1be20d93a..bfc773991bdc 100644
--- a/Documentation/crypto/async-tx-api.txt
+++ b/Documentation/crypto/async-tx-api.rst
@@ -1,27 +1,32 @@
-		 Asynchronous Transfers/Transforms API
+.. SPDX-License-Identifier: GPL-2.0
 
-1 INTRODUCTION
+=====================================
+Asynchronous Transfers/Transforms API
+=====================================
 
-2 GENEALOGY
+.. Contents
 
-3 USAGE
-3.1 General format of the API
-3.2 Supported operations
-3.3 Descriptor management
-3.4 When does the operation execute?
-3.5 When does the operation complete?
-3.6 Constraints
-3.7 Example
+  1. INTRODUCTION
 
-4 DMAENGINE DRIVER DEVELOPER NOTES
-4.1 Conformance points
-4.2 "My application needs exclusive control of hardware channels"
+  2 GENEALOGY
 
-5 SOURCE
+  3 USAGE
+  3.1 General format of the API
+  3.2 Supported operations
+  3.3 Descriptor management
+  3.4 When does the operation execute?
+  3.5 When does the operation complete?
+  3.6 Constraints
+  3.7 Example
 
----
+  4 DMAENGINE DRIVER DEVELOPER NOTES
+  4.1 Conformance points
+  4.2 "My application needs exclusive control of hardware channels"
 
-1 INTRODUCTION
+  5 SOURCE
+
+1. Introduction
+===============
 
 The async_tx API provides methods for describing a chain of asynchronous
 bulk memory transfers/transforms with support for inter-transactional
@@ -31,7 +36,8 @@ that is written to the API can optimize for asynchronous operation and
 the API will fit the chain of operations to the available offload
 resources.
 
-2 GENEALOGY
+2.Genealogy
+===========
 
 The API was initially designed to offload the memory copy and
 xor-parity-calculations of the md-raid5 driver using the offload engines
@@ -39,40 +45,52 @@ present in the Intel(R) Xscale series of I/O processors.  It also built
 on the 'dmaengine' layer developed for offloading memory copies in the
 network stack using Intel(R) I/OAT engines.  The following design
 features surfaced as a result:
-1/ implicit synchronous path: users of the API do not need to know if
+
+1. implicit synchronous path: users of the API do not need to know if
    the platform they are running on has offload capabilities.  The
    operation will be offloaded when an engine is available and carried out
    in software otherwise.
-2/ cross channel dependency chains: the API allows a chain of dependent
+2. cross channel dependency chains: the API allows a chain of dependent
    operations to be submitted, like xor->copy->xor in the raid5 case.  The
    API automatically handles cases where the transition from one operation
    to another implies a hardware channel switch.
-3/ dmaengine extensions to support multiple clients and operation types
+3. dmaengine extensions to support multiple clients and operation types
    beyond 'memcpy'
 
-3 USAGE
+3. Usage
+========
 
-3.1 General format of the API:
-struct dma_async_tx_descriptor *
-async_<operation>(<op specific parameters>, struct async_submit ctl *submit)
+3.1 General format of the API
+-----------------------------
 
-3.2 Supported operations:
-memcpy  - memory copy between a source and a destination buffer
-memset  - fill a destination buffer with a byte value
-xor     - xor a series of source buffers and write the result to a
+::
+
+  struct dma_async_tx_descriptor *
+  async_<operation>(<op specific parameters>, struct async_submit ctl *submit)
+
+3.2 Supported operations
+------------------------
+
+========  ====================================================================
+memcpy    memory copy between a source and a destination buffer
+memset    fill a destination buffer with a byte value
+xor       xor a series of source buffers and write the result to a
 	  destination buffer
-xor_val - xor a series of source buffers and set a flag if the
+xor_val   xor a series of source buffers and set a flag if the
 	  result is zero.  The implementation attempts to prevent
 	  writes to memory
-pq	- generate the p+q (raid6 syndrome) from a series of source buffers
-pq_val  - validate that a p and or q buffer are in sync with a given series of
+pq	  generate the p+q (raid6 syndrome) from a series of source buffers
+pq_val    validate that a p and or q buffer are in sync with a given series of
 	  sources
-datap	- (raid6_datap_recov) recover a raid6 data block and the p block
+datap	  (raid6_datap_recov) recover a raid6 data block and the p block
 	  from the given sources
-2data	- (raid6_2data_recov) recover 2 raid6 data blocks from the given
+2data	  (raid6_2data_recov) recover 2 raid6 data blocks from the given
 	  sources
+========  ====================================================================
+
+3.3 Descriptor management
+-------------------------
 
-3.3 Descriptor management:
 The return value is non-NULL and points to a 'descriptor' when the operation
 has been queued to execute asynchronously.  Descriptors are recycled
 resources, under control of the offload engine driver, to be reused as
@@ -82,12 +100,15 @@ before the dependency is submitted.  This requires that all descriptors be
 acknowledged by the application before the offload engine driver is allowed to
 recycle (or free) the descriptor.  A descriptor can be acked by one of the
 following methods:
-1/ setting the ASYNC_TX_ACK flag if no child operations are to be submitted
-2/ submitting an unacknowledged descriptor as a dependency to another
+
+1. setting the ASYNC_TX_ACK flag if no child operations are to be submitted
+2. submitting an unacknowledged descriptor as a dependency to another
    async_tx call will implicitly set the acknowledged state.
-3/ calling async_tx_ack() on the descriptor.
+3. calling async_tx_ack() on the descriptor.
 
 3.4 When does the operation execute?
+------------------------------------
+
 Operations do not immediately issue after return from the
 async_<operation> call.  Offload engine drivers batch operations to
 improve performance by reducing the number of mmio cycles needed to
@@ -98,12 +119,15 @@ channels since the application has no knowledge of channel to operation
 mapping.
 
 3.5 When does the operation complete?
+-------------------------------------
+
 There are two methods for an application to learn about the completion
 of an operation.
-1/ Call dma_wait_for_async_tx().  This call causes the CPU to spin while
+
+1. Call dma_wait_for_async_tx().  This call causes the CPU to spin while
    it polls for the completion of the operation.  It handles dependency
    chains and issuing pending operations.
-2/ Specify a completion callback.  The callback routine runs in tasklet
+2. Specify a completion callback.  The callback routine runs in tasklet
    context if the offload engine driver supports interrupts, or it is
    called in application context if the operation is carried out
    synchronously in software.  The callback can be set in the call to
@@ -111,83 +135,95 @@ of an operation.
    unknown length it can use the async_trigger_callback() routine to set a
    completion interrupt/callback at the end of the chain.
 
-3.6 Constraints:
-1/ Calls to async_<operation> are not permitted in IRQ context.  Other
+3.6 Constraints
+---------------
+
+1. Calls to async_<operation> are not permitted in IRQ context.  Other
    contexts are permitted provided constraint #2 is not violated.
-2/ Completion callback routines cannot submit new operations.  This
+2. Completion callback routines cannot submit new operations.  This
    results in recursion in the synchronous case and spin_locks being
    acquired twice in the asynchronous case.
 
-3.7 Example:
+3.7 Example
+-----------
+
 Perform a xor->copy->xor operation where each operation depends on the
-result from the previous operation:
-
-void callback(void *param)
-{
-	struct completion *cmp = param;
-
-	complete(cmp);
-}
-
-void run_xor_copy_xor(struct page **xor_srcs,
-		      int xor_src_cnt,
-		      struct page *xor_dest,
-		      size_t xor_len,
-		      struct page *copy_src,
-		      struct page *copy_dest,
-		      size_t copy_len)
-{
-	struct dma_async_tx_descriptor *tx;
-	addr_conv_t addr_conv[xor_src_cnt];
-	struct async_submit_ctl submit;
-	addr_conv_t addr_conv[NDISKS];
-	struct completion cmp;
-
-	init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL,
-			  addr_conv);
-	tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit)
-
-	submit->depend_tx = tx;
-	tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, &submit);
-
-	init_completion(&cmp);
-	init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST | ASYNC_TX_ACK, tx,
-			  callback, &cmp, addr_conv);
-	tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit);
-
-	async_tx_issue_pending_all();
-
-	wait_for_completion(&cmp);
-}
+result from the previous operation::
+
+    void callback(void *param)
+    {
+	    struct completion *cmp = param;
+
+	    complete(cmp);
+    }
+
+    void run_xor_copy_xor(struct page **xor_srcs,
+			int xor_src_cnt,
+			struct page *xor_dest,
+			size_t xor_len,
+			struct page *copy_src,
+			struct page *copy_dest,
+			size_t copy_len)
+    {
+	    struct dma_async_tx_descriptor *tx;
+	    addr_conv_t addr_conv[xor_src_cnt];
+	    struct async_submit_ctl submit;
+	    addr_conv_t addr_conv[NDISKS];
+	    struct completion cmp;
+
+	    init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL,
+			    addr_conv);
+	    tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit)
+
+	    submit->depend_tx = tx;
+	    tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, &submit);
+
+	    init_completion(&cmp);
+	    init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST | ASYNC_TX_ACK, tx,
+			    callback, &cmp, addr_conv);
+	    tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit);
+
+	    async_tx_issue_pending_all();
+
+	    wait_for_completion(&cmp);
+    }
 
 See include/linux/async_tx.h for more information on the flags.  See the
 ops_run_* and ops_complete_* routines in drivers/md/raid5.c for more
 implementation examples.
 
-4 DRIVER DEVELOPMENT NOTES
+4. Driver Development Notes
+===========================
+
+4.1 Conformance points
+----------------------
 
-4.1 Conformance points:
 There are a few conformance points required in dmaengine drivers to
 accommodate assumptions made by applications using the async_tx API:
-1/ Completion callbacks are expected to happen in tasklet context
-2/ dma_async_tx_descriptor fields are never manipulated in IRQ context
-3/ Use async_tx_run_dependencies() in the descriptor clean up path to
+
+1. Completion callbacks are expected to happen in tasklet context
+2. dma_async_tx_descriptor fields are never manipulated in IRQ context
+3. Use async_tx_run_dependencies() in the descriptor clean up path to
    handle submission of dependent operations
 
 4.2 "My application needs exclusive control of hardware channels"
+-----------------------------------------------------------------
+
 Primarily this requirement arises from cases where a DMA engine driver
 is being used to support device-to-memory operations.  A channel that is
 performing these operations cannot, for many platform specific reasons,
 be shared.  For these cases the dma_request_channel() interface is
 provided.
 
-The interface is:
-struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
-				     dma_filter_fn filter_fn,
-				     void *filter_param);
+The interface is::
 
-Where dma_filter_fn is defined as:
-typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
+  struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
+				       dma_filter_fn filter_fn,
+				       void *filter_param);
+
+Where dma_filter_fn is defined as::
+
+  typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
 
 When the optional 'filter_fn' parameter is set to NULL
 dma_request_channel simply returns the first channel that satisfies the
@@ -207,19 +243,28 @@ private.  Alternatively, it is set when dma_request_channel() finds an
 unused "public" channel.
 
 A couple caveats to note when implementing a driver and consumer:
-1/ Once a channel has been privately allocated it will no longer be
+
+1. Once a channel has been privately allocated it will no longer be
    considered by the general-purpose allocator even after a call to
    dma_release_channel().
-2/ Since capabilities are specified at the device level a dma_device
+2. Since capabilities are specified at the device level a dma_device
    with multiple channels will either have all channels public, or all
    channels private.
 
-5 SOURCE
+5. Source
+---------
 
-include/linux/dmaengine.h: core header file for DMA drivers and api users
-drivers/dma/dmaengine.c: offload engine channel management routines
-drivers/dma/: location for offload engine drivers
-include/linux/async_tx.h: core header file for the async_tx api
-crypto/async_tx/async_tx.c: async_tx interface to dmaengine and common code
-crypto/async_tx/async_memcpy.c: copy offload
-crypto/async_tx/async_xor.c: xor and xor zero sum offload
+include/linux/dmaengine.h:
+    core header file for DMA drivers and api users
+drivers/dma/dmaengine.c:
+    offload engine channel management routines
+drivers/dma/:
+    location for offload engine drivers
+include/linux/async_tx.h:
+    core header file for the async_tx api
+crypto/async_tx/async_tx.c:
+    async_tx interface to dmaengine and common code
+crypto/async_tx/async_memcpy.c:
+    copy offload
+crypto/async_tx/async_xor.c:
+    xor and xor zero sum offload
diff --git a/Documentation/crypto/index.rst b/Documentation/crypto/index.rst
index b2eeab3c8631..22a6870bf356 100644
--- a/Documentation/crypto/index.rst
+++ b/Documentation/crypto/index.rst
@@ -19,6 +19,8 @@ for cryptographic use cases, as well as programming examples.
    intro
    api-intro
    architecture
+
+   async-tx-api
    asymmetric-keys
    devel-algos
    userspace-if
-- 
2.24.1

[PATCH 05/11] docs: crypto: descore-readme.txt: convert to ReST format

[Mauro Carvalho Chehab]

Convert this readme file to ReST file format, preserving its
contents as-is as much as possible. The only changes are:

- Added chapter and title markups;
- Added blank lines where needed;
- Added list markups where needed;
- Use a table markup;
- replace markups like `foo' to ``foo``;
- add one extra literal markup to avoid warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 ...{descore-readme.txt => descore-readme.rst} | 152 ++++++++++++------
 Documentation/crypto/index.rst                |   1 +
 2 files changed, 108 insertions(+), 45 deletions(-)
 rename Documentation/crypto/{descore-readme.txt => descore-readme.rst} (81%)

diff --git a/Documentation/crypto/descore-readme.txt b/Documentation/crypto/descore-readme.rst
similarity index 81%
rename from Documentation/crypto/descore-readme.txt
rename to Documentation/crypto/descore-readme.rst
index 16e9e6350755..45bd9c8babf4 100644
--- a/Documentation/crypto/descore-readme.txt
+++ b/Documentation/crypto/descore-readme.rst
@@ -1,8 +1,20 @@
-Below is the original README file from the descore.shar package.
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===========================================
+Fast & Portable DES encryption & decryption
+===========================================
+
+.. note::
+
+   Below is the original README file from the descore.shar package,
+   converted to ReST format.
+
 ------------------------------------------------------------------------------
 
 des - fast & portable DES encryption & decryption.
-Copyright (C) 1992  Dana L. How
+
+Copyright |copy| 1992  Dana L. How
 
 This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU Library General Public License as published by
@@ -20,13 +32,12 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 
 Author's address: how@isl.stanford.edu
 
-$Id: README,v 1.15 1992/05/20 00:25:32 how E $
-
-
-==>> To compile after untarring/unsharring, just `make' <<==
+.. README,v 1.15 1992/05/20 00:25:32 how E
 
+==>> To compile after untarring/unsharring, just ``make`` <<==
 
 This package was designed with the following goals:
+
 1.	Highest possible encryption/decryption PERFORMANCE.
 2.	PORTABILITY to any byte-addressable host with a 32bit unsigned C type
 3.	Plug-compatible replacement for KERBEROS's low-level routines.
@@ -36,7 +47,7 @@ register-starved machines.  My discussions with Richard Outerbridge,
 71755.204@compuserve.com, sparked a number of these enhancements.
 
 To more rapidly understand the code in this package, inspect desSmallFips.i
-(created by typing `make') BEFORE you tackle desCode.h.  The latter is set
+(created by typing ``make``) BEFORE you tackle desCode.h.  The latter is set
 up in a parameterized fashion so it can easily be modified by speed-daemon
 hackers in pursuit of that last microsecond.  You will find it more
 illuminating to inspect one specific implementation,
@@ -47,11 +58,13 @@ performance comparison to other available des code which i could
 compile on a SPARCStation 1 (cc -O4, gcc -O2):
 
 this code (byte-order independent):
-   30us per encryption (options: 64k tables, no IP/FP)
-   33us per encryption (options: 64k tables, FIPS standard bit ordering)
-   45us per encryption (options:  2k tables, no IP/FP)
-   48us per encryption (options:  2k tables, FIPS standard bit ordering)
-  275us to set a new key (uses 1k of key tables)
+
+  - 30us per encryption (options: 64k tables, no IP/FP)
+  - 33us per encryption (options: 64k tables, FIPS standard bit ordering)
+  - 45us per encryption (options:  2k tables, no IP/FP)
+  - 48us per encryption (options:  2k tables, FIPS standard bit ordering)
+  - 275us to set a new key (uses 1k of key tables)
+
 	this has the quickest encryption/decryption routines i've seen.
 	since i was interested in fast des filters rather than crypt(3)
 	and password cracking, i haven't really bothered yet to speed up
@@ -63,15 +76,20 @@ this code (byte-order independent):
 	are highly variable because of cache effects).
 
 kerberos des replacement from australia (version 1.95):
-   53us per encryption (uses 2k of tables)
-   96us to set a new key (uses 2.25k of key tables)
+
+  - 53us per encryption (uses 2k of tables)
+  - 96us to set a new key (uses 2.25k of key tables)
+
 	so despite the author's inclusion of some of the performance
 	improvements i had suggested to him, this package's
 	encryption/decryption is still slower on the sparc and 68000.
 	more specifically, 19-40% slower on the 68020 and 11-35% slower
 	on the sparc,  depending on the compiler;
 	in full gory detail (ALT_ECB is a libdes variant):
+
+	===============	==============	===============	=================
 	compiler   	machine		desCore	libdes	ALT_ECB	slower by
+	===============	==============	===============	=================
 	gcc 2.1 -O2	Sun 3/110	304  uS	369.5uS	461.8uS	 22%
 	cc      -O1	Sun 3/110	336  uS	436.6uS	399.3uS	 19%
 	cc      -O2	Sun 3/110	360  uS	532.4uS	505.1uS	 40%
@@ -79,10 +97,15 @@ kerberos des replacement from australia (version 1.95):
 	gcc 2.1 -O2	Sun 4/50	 48  uS	 53.4uS	 57.5uS	 11%
 	cc      -O2	Sun 4/50	 48  uS	 64.6uS	 64.7uS	 35%
 	cc      -O4	Sun 4/50	 48  uS	 64.7uS	 64.9uS	 35%
+	===============	==============	===============	=================
+
 	(my time measurements are not as accurate as his).
+
    the comments in my first release of desCore on version 1.92:
-   68us per encryption (uses 2k of tables)
-   96us to set a new key (uses 2.25k of key tables)
+
+   - 68us per encryption (uses 2k of tables)
+   - 96us to set a new key (uses 2.25k of key tables)
+
 	this is a very nice package which implements the most important
 	of the optimizations which i did in my encryption routines.
 	it's a bit weak on common low-level optimizations which is why
@@ -91,48 +114,60 @@ kerberos des replacement from australia (version 1.95):
 	speed up the key-setting routines with impressive results.
 	(at some point i may do the same in my package).  he also implements
 	the rest of the mit des library.
+
 	(code from eay@psych.psy.uq.oz.au via comp.sources.misc)
 
 fast crypt(3) package from denmark:
+
 	the des routine here is buried inside a loop to do the
 	crypt function and i didn't feel like ripping it out and measuring
 	performance. his code takes 26 sparc instructions to compute one
 	des iteration; above, Quick (64k) takes 21 and Small (2k) takes 37.
 	he claims to use 280k of tables but the iteration calculation seems
 	to use only 128k.  his tables and code are machine independent.
+
 	(code from glad@daimi.aau.dk via alt.sources or comp.sources.misc)
 
 swedish reimplementation of Kerberos des library
-  108us per encryption (uses 34k worth of tables)
-  134us to set a new key (uses 32k of key tables to get this speed!)
+
+  - 108us per encryption (uses 34k worth of tables)
+  - 134us to set a new key (uses 32k of key tables to get this speed!)
+
 	the tables used seem to be machine-independent;
 	he seems to have included a lot of special case code
-	so that, e.g., `long' loads can be used instead of 4 `char' loads
+	so that, e.g., ``long`` loads can be used instead of 4 ``char`` loads
 	when the machine's architecture allows it.
+
 	(code obtained from chalmers.se:pub/des)
 
 crack 3.3c package from england:
+
 	as in crypt above, the des routine is buried in a loop. it's
 	also very modified for crypt.  his iteration code uses 16k
 	of tables and appears to be slow.
+
 	(code obtained from aem@aber.ac.uk via alt.sources or comp.sources.misc)
 
-``highly optimized'' and tweaked Kerberos/Athena code (byte-order dependent):
-  165us per encryption (uses 6k worth of tables)
-  478us to set a new key (uses <1k of key tables)
+``highly optimized`` and tweaked Kerberos/Athena code (byte-order dependent):
+
+  - 165us per encryption (uses 6k worth of tables)
+  - 478us to set a new key (uses <1k of key tables)
+
 	so despite the comments in this code, it was possible to get
 	faster code AND smaller tables, as well as making the tables
 	machine-independent.
 	(code obtained from prep.ai.mit.edu)
 
 UC Berkeley code (depends on machine-endedness):
-  226us per encryption
-10848us to set a new key
+  -  226us per encryption
+  - 10848us to set a new key
+
 	table sizes are unclear, but they don't look very small
 	(code obtained from wuarchive.wustl.edu)
 
 
 motivation and history
+======================
 
 a while ago i wanted some des routines and the routines documented on sun's
 man pages either didn't exist or dumped core.  i had heard of kerberos,
@@ -142,10 +177,10 @@ it was too convoluted, the code had been written without taking
 advantage of the regular structure of operations such as IP, E, and FP
 (i.e. the author didn't sit down and think before coding),
 it was excessively slow,  the author had attempted to clarify the code
-by adding MORE statements to make the data movement more `consistent'
+by adding MORE statements to make the data movement more ``consistent``
 instead of simplifying his implementation and cutting down on all data
 movement (in particular, his use of L1, R1, L2, R2), and it was full of
-idiotic `tweaks' for particular machines which failed to deliver significant
+idiotic ``tweaks`` for particular machines which failed to deliver significant
 speedups but which did obfuscate everything.  so i took the test data
 from his verification program and rewrote everything else.
 
@@ -167,12 +202,13 @@ than versions hand-written in assembly for the sparc!
 
 
 porting notes
+=============
 
 one thing i did not want to do was write an enormous mess
 which depended on endedness and other machine quirks,
 and which necessarily produced different code and different lookup tables
 for different machines.  see the kerberos code for an example
-of what i didn't want to do; all their endedness-specific `optimizations'
+of what i didn't want to do; all their endedness-specific ``optimizations``
 obfuscate the code and in the end were slower than a simpler machine
 independent approach.  however, there are always some portability
 considerations of some kind, and i have included some options
@@ -184,8 +220,8 @@ perhaps some will still regard the result as a mess!
    i assume word pointers can be freely cast to and from char pointers.
    note that 99% of C programs make these assumptions.
    i always use unsigned char's if the high bit could be set.
-2) the typedef `word' means a 32 bit unsigned integral type.
-   if `unsigned long' is not 32 bits, change the typedef in desCore.h.
+2) the typedef ``word`` means a 32 bit unsigned integral type.
+   if ``unsigned long`` is not 32 bits, change the typedef in desCore.h.
    i assume sizeof(word) == 4 EVERYWHERE.
 
 the (worst-case) cost of my NOT doing endedness-specific optimizations
@@ -195,40 +231,46 @@ the input and output work areas do not need to be word-aligned.
 
 
 OPTIONAL performance optimizations
+==================================
 
-1) you should define one of `i386,' `vax,' `mc68000,' or `sparc,'
+1) you should define one of ``i386,`` ``vax,`` ``mc68000,`` or ``sparc,``
    whichever one is closest to the capabilities of your machine.
    see the start of desCode.h to see exactly what this selection implies.
    note that if you select the wrong one, the des code will still work;
    these are just performance tweaks.
-2) for those with functional `asm' keywords: you should change the
+2) for those with functional ``asm`` keywords: you should change the
    ROR and ROL macros to use machine rotate instructions if you have them.
    this will save 2 instructions and a temporary per use,
    or about 32 to 40 instructions per en/decryption.
+
    note that gcc is smart enough to translate the ROL/R macros into
    machine rotates!
 
 these optimizations are all rather persnickety, yet with them you should
 be able to get performance equal to assembly-coding, except that:
+
 1) with the lack of a bit rotate operator in C, rotates have to be synthesized
-   from shifts.  so access to `asm' will speed things up if your machine
+   from shifts.  so access to ``asm`` will speed things up if your machine
    has rotates, as explained above in (3) (not necessary if you use gcc).
 2) if your machine has less than 12 32-bit registers i doubt your compiler will
    generate good code.
-   `i386' tries to configure the code for a 386 by only declaring 3 registers
+
+   ``i386`` tries to configure the code for a 386 by only declaring 3 registers
    (it appears that gcc can use ebx, esi and edi to hold register variables).
    however, if you like assembly coding, the 386 does have 7 32-bit registers,
-   and if you use ALL of them, use `scaled by 8' address modes with displacement
+   and if you use ALL of them, use ``scaled by 8`` address modes with displacement
    and other tricks, you can get reasonable routines for DesQuickCore... with
    about 250 instructions apiece.  For DesSmall... it will help to rearrange
    des_keymap, i.e., now the sbox # is the high part of the index and
    the 6 bits of data is the low part; it helps to exchange these.
+
    since i have no way to conveniently test it i have not provided my
    shoehorned 386 version.  note that with this release of desCore, gcc is able
    to put everything in registers(!), and generate about 370 instructions apiece
    for the DesQuickCore... routines!
 
 coding notes
+============
 
 the en/decryption routines each use 6 necessary register variables,
 with 4 being actively used at once during the inner iterations.
@@ -236,15 +278,18 @@ if you don't have 4 register variables get a new machine.
 up to 8 more registers are used to hold constants in some configurations.
 
 i assume that the use of a constant is more expensive than using a register:
+
 a) additionally, i have tried to put the larger constants in registers.
    registering priority was by the following:
-	anything more than 12 bits (bad for RISC and CISC)
-	greater than 127 in value (can't use movq or byte immediate on CISC)
-	9-127 (may not be able to use CISC shift immediate or add/sub quick),
-	1-8 were never registered, being the cheapest constants.
+
+	- anything more than 12 bits (bad for RISC and CISC)
+	- greater than 127 in value (can't use movq or byte immediate on CISC)
+	- 9-127 (may not be able to use CISC shift immediate or add/sub quick),
+	- 1-8 were never registered, being the cheapest constants.
+
 b) the compiler may be too stupid to realize table and table+256 should
    be assigned to different constant registers and instead repetitively
-   do the arithmetic, so i assign these to explicit `m' register variables
+   do the arithmetic, so i assign these to explicit ``m`` register variables
    when possible and helpful.
 
 i assume that indexing is cheaper or equivalent to auto increment/decrement,
@@ -253,25 +298,31 @@ this assumption is reversed for 68k and vax.
 
 i assume that addresses can be cheaply formed from two registers,
 or from a register and a small constant.
-for the 68000, the `two registers and small offset' form is used sparingly.
+for the 68000, the ``two registers and small offset`` form is used sparingly.
 all index scaling is done explicitly - no hidden shifts by log2(sizeof).
 
 the code is written so that even a dumb compiler
 should never need more than one hidden temporary,
 increasing the chance that everything will fit in the registers.
 KEEP THIS MORE SUBTLE POINT IN MIND IF YOU REWRITE ANYTHING.
+
 (actually, there are some code fragments now which do require two temps,
 but fixing it would either break the structure of the macros or
 require declaring another temporary).
 
 
 special efficient data format
+==============================
+
+bits are manipulated in this arrangement most of the time (S7 S5 S3 S1)::
 
-bits are manipulated in this arrangement most of the time (S7 S5 S3 S1):
 	003130292827xxxx242322212019xxxx161514131211xxxx080706050403xxxx
+
 (the x bits are still there, i'm just emphasizing where the S boxes are).
-bits are rotated left 4 when computing S6 S4 S2 S0:
+bits are rotated left 4 when computing S6 S4 S2 S0::
+
 	282726252423xxxx201918171615xxxx121110090807xxxx040302010031xxxx
+
 the rightmost two bits are usually cleared so the lower byte can be used
 as an index into an sbox mapping table. the next two x'd bits are set
 to various values to access different parts of the tables.
@@ -288,7 +339,7 @@ datatypes:
 	must be long-aligned.
 
 DesQuickInit()
-	call this before using any other routine with `Quick' in its name.
+	call this before using any other routine with ``Quick`` in its name.
 	it generates the special 64k table these routines need.
 DesQuickDone()
 	frees this table
@@ -298,6 +349,7 @@ DesMethod(m, k)
 	which must have odd parity (or -1 is returned) and which must
 	not be a (semi-)weak key (or -2 is returned).
 	normally DesMethod() returns 0.
+
 	m is filled in from k so that when one of the routines below
 	is called with m, the routine will act like standard des
 	en/decryption with the key k. if you use DesMethod,
@@ -308,19 +360,26 @@ DesMethod(m, k)
 	will be set to magic constants which speed up the encryption/decryption
 	on some machines.  and yes, each byte controls
 	a specific sbox during a specific iteration.
+
 	you really shouldn't use the 768bit format directly;  i should
 	provide a routine that converts 128 6-bit bytes (specified in
 	S-box mapping order or something) into the right format for you.
 	this would entail some byte concatenation and rotation.
 
 Des{Small|Quick}{Fips|Core}{Encrypt|Decrypt}(d, m, s)
-	performs des on the 8 bytes at s into the 8 bytes at d. (d,s: char *).
+	performs des on the 8 bytes at s into the 8 bytes at
+	``d. (d,s: char *)``.
+
 	uses m as a 768bit key as explained above.
+
 	the Encrypt|Decrypt choice is obvious.
+
 	Fips|Core determines whether a completely standard FIPS initial
 	and final permutation is done; if not, then the data is loaded
 	and stored in a nonstandard bit order (FIPS w/o IP/FP).
+
 	Fips slows down Quick by 10%, Small by 9%.
+
 	Small|Quick determines whether you use the normal routine
 	or the crazy quick one which gobbles up 64k more of memory.
 	Small is 50% slower then Quick, but Quick needs 32 times as much
@@ -329,15 +388,17 @@ Des{Small|Quick}{Fips|Core}{Encrypt|Decrypt}(d, m, s)
 
 
 Getting it to compile on your machine
+=====================================
 
 there are no machine-dependencies in the code (see porting),
-except perhaps the `now()' macro in desTest.c.
+except perhaps the ``now()`` macro in desTest.c.
 ALL generated tables are machine independent.
 you should edit the Makefile with the appropriate optimization flags
 for your compiler (MAX optimization).
 
 
 Speeding up kerberos (and/or its des library)
+=============================================
 
 note that i have included a kerberos-compatible interface in desUtil.c
 through the functions des_key_sched() and des_ecb_encrypt().
@@ -347,6 +408,7 @@ you should not need to #include desCore.h;  just include the header
 file provided with the kerberos library.
 
 Other uses
+==========
 
 the macros in desCode.h would be very useful for putting inline des
 functions in more complicated encryption routines.
diff --git a/Documentation/crypto/index.rst b/Documentation/crypto/index.rst
index 22a6870bf356..21338fa92642 100644
--- a/Documentation/crypto/index.rst
+++ b/Documentation/crypto/index.rst
@@ -27,3 +27,4 @@ for cryptographic use cases, as well as programming examples.
    crypto_engine
    api
    api-samples
+   descore-readme
-- 
2.24.1

[PATCH 06/11] docs: misc-devices/spear-pcie-gadget.txt: convert to ReST

[Mauro Carvalho Chehab]

- Use title/chapter markups;
- Use table markups;
- Mark literal blocks as such;
- Adjust indentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/misc-devices/index.rst          |   1 +
 .../misc-devices/spear-pcie-gadget.rst        | 170 ++++++++++++++++++
 .../misc-devices/spear-pcie-gadget.txt        | 130 --------------
 3 files changed, 171 insertions(+), 130 deletions(-)
 create mode 100644 Documentation/misc-devices/spear-pcie-gadget.rst
 delete mode 100644 Documentation/misc-devices/spear-pcie-gadget.txt

diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index f11c5daeada5..2d454b413aef 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -20,4 +20,5 @@ fit into other categories.
    isl29003
    lis3lv02d
    max6875
+   spear-pcie-gadget
    xilinx_sdfec
diff --git a/Documentation/misc-devices/spear-pcie-gadget.rst b/Documentation/misc-devices/spear-pcie-gadget.rst
new file mode 100644
index 000000000000..09b9d6c7ac15
--- /dev/null
+++ b/Documentation/misc-devices/spear-pcie-gadget.rst
@@ -0,0 +1,170 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Spear PCIe Gadget Driver
+========================
+
+Author
+======
+Pratyush Anand (pratyush.anand@gmail.com)
+
+Location
+========
+driver/misc/spear13xx_pcie_gadget.c
+
+Supported Chip:
+===============
+SPEAr1300
+SPEAr1310
+
+Menuconfig option:
+==================
+Device Drivers
+	Misc devices
+		PCIe gadget support for SPEAr13XX platform
+
+purpose
+=======
+This driver has several nodes which can be read/written by configfs interface.
+Its main purpose is to configure selected dual mode PCIe controller as device
+and then program its various registers to configure it as a particular device
+type. This driver can be used to show spear's PCIe device capability.
+
+Description of different nodes:
+===============================
+
+read behavior of nodes:
+-----------------------
+
+=============== ==============================================================
+link 		gives ltssm status.
+int_type 	type of supported interrupt
+no_of_msi 	zero if MSI is not enabled by host. A positive value is the
+		number of MSI vector granted.
+vendor_id	returns programmed vendor id (hex)
+device_id	returns programmed device id(hex)
+bar0_size:	returns size of bar0 in hex.
+bar0_address	returns address of bar0 mapped area in hex.
+bar0_rw_offset	returns offset of bar0 for which bar0_data will return value.
+bar0_data	returns data at bar0_rw_offset.
+=============== ==============================================================
+
+write behavior of nodes:
+------------------------
+
+=============== ================================================================
+link 		write UP to enable ltsmm DOWN to disable
+int_type	write interrupt type to be configured and (int_type could be
+		INTA, MSI or NO_INT). Select MSI only when you have programmed
+		no_of_msi node.
+no_of_msi	number of MSI vector needed.
+inta		write 1 to assert INTA and 0 to de-assert.
+send_msi	write MSI vector to be sent.
+vendor_id	write vendor id(hex) to be programmed.
+device_id	write device id(hex) to be programmed.
+bar0_size	write size of bar0 in hex. default bar0 size is 1000 (hex)
+		bytes.
+bar0_address	write	address of bar0 mapped area in hex. (default mapping of
+		bar0 is SYSRAM1(E0800000). Always program bar size before bar
+		address. Kernel might modify bar size and address for alignment,
+		so read back bar size and address after writing to cross check.
+bar0_rw_offset	write offset of bar0 for which	bar0_data will write value.
+bar0_data	write data to be written at bar0_rw_offset.
+=============== ================================================================
+
+Node programming example
+========================
+
+Program all PCIe registers in such a way that when this device is connected
+to the PCIe host, then host sees this device as 1MB RAM.
+
+::
+
+    #mount -t configfs none /Config
+
+For nth PCIe Device Controller::
+
+    # cd /config/pcie_gadget.n/
+
+Now you have all the nodes in this directory.
+program vendor id as 0x104a::
+
+    # echo 104A >> vendor_id
+
+program device id as 0xCD80::
+
+    # echo CD80 >> device_id
+
+program BAR0 size as 1MB::
+
+    # echo 100000 >> bar0_size
+
+check for programmed bar0 size::
+
+    # cat bar0_size
+
+Program BAR0 Address as DDR (0x2100000). This is the physical address of
+memory, which is to be made visible to PCIe host. Similarly any other peripheral
+can also be made visible to PCIe host. E.g., if you program base address of UART
+as BAR0 address then when this device will be connected to a host, it will be
+visible as UART.
+
+::
+
+    # echo 2100000 >> bar0_address
+
+program interrupt type : INTA::
+
+    # echo INTA >> int_type
+
+go for link up now::
+
+    # echo UP >> link
+
+It will have to be insured that, once link up is done on gadget, then only host
+is initialized and start to search PCIe devices on its port.
+
+::
+
+    /*wait till link is up*/
+    # cat link
+
+Wait till it returns UP.
+
+To assert INTA::
+
+    # echo 1 >> inta
+
+To de-assert INTA::
+
+    # echo 0 >> inta
+
+if MSI is to be used as interrupt, program no of msi vector needed (say4)::
+
+    # echo 4 >> no_of_msi
+
+select MSI as interrupt type::
+
+    # echo MSI >> int_type
+
+go for link up now::
+
+    # echo UP >> link
+
+wait till link is up::
+
+    # cat link
+
+An application can repetitively read this node till link is found UP. It can
+sleep between two read.
+
+wait till msi is enabled::
+
+    # cat no_of_msi
+
+Should return 4 (number of requested MSI vector)
+
+to send msi vector 2::
+
+    # echo 2 >> send_msi
+    # cd -
diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt
deleted file mode 100644
index 89b88dee4143..000000000000
--- a/Documentation/misc-devices/spear-pcie-gadget.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-Spear PCIe Gadget Driver:
-
-Author
-=============
-Pratyush Anand (pratyush.anand@gmail.com)
-
-Location
-============
-driver/misc/spear13xx_pcie_gadget.c
-
-Supported Chip:
-===================
-SPEAr1300
-SPEAr1310
-
-Menuconfig option:
-==========================
-Device Drivers
-	Misc devices
-		PCIe gadget support for SPEAr13XX platform
-purpose
-===========
-This driver has several nodes which can be read/written by configfs interface.
-Its main purpose is to configure selected dual mode PCIe controller as device
-and then program its various registers to configure it as a particular device
-type. This driver can be used to show spear's PCIe device capability.
-
-Description of different nodes:
-=================================
-
-read behavior of nodes:
-------------------------------
-link 		:gives ltssm status.
-int_type 	:type of supported interrupt
-no_of_msi 	:zero if MSI is not enabled by host. A positive value is the
-		number of MSI vector granted.
-vendor_id	:returns programmed vendor id (hex)
-device_id	:returns programmed device id(hex)
-bar0_size:	:returns size of bar0 in hex.
-bar0_address	:returns address of bar0 mapped area in hex.
-bar0_rw_offset	:returns offset of bar0 for which bar0_data will return value.
-bar0_data	:returns data at bar0_rw_offset.
-
-write behavior of nodes:
-------------------------------
-link 		:write UP to enable ltsmm DOWN to disable
-int_type	:write interrupt type to be configured and (int_type could be
-		INTA, MSI or NO_INT). Select MSI only when you have programmed
-		no_of_msi node.
-no_of_msi	:number of MSI vector needed.
-inta		:write 1 to assert INTA and 0 to de-assert.
-send_msi	:write MSI vector to be sent.
-vendor_id	:write vendor id(hex) to be programmed.
-device_id	:write device id(hex) to be programmed.
-bar0_size	:write size of bar0 in hex. default bar0 size is 1000 (hex)
-		bytes.
-bar0_address	:write	address of bar0 mapped area in hex. (default mapping of
-		bar0 is SYSRAM1(E0800000). Always program bar size before bar
-		address. Kernel might modify bar size and address for alignment, so
-		read back bar size and address after writing to cross check.
-bar0_rw_offset	:write offset of bar0 for which	bar0_data will write value.
-bar0_data	:write data to be written at bar0_rw_offset.
-
-Node programming example
-===========================
-Program all PCIe registers in such a way that when this device is connected
-to the PCIe host, then host sees this device as 1MB RAM.
-#mount -t configfs none /Config
-For nth PCIe Device Controller
-# cd /config/pcie_gadget.n/
-Now you have all the nodes in this directory.
-program vendor id as 0x104a
-# echo 104A >> vendor_id
-
-program device id as 0xCD80
-# echo CD80 >> device_id
-
-program BAR0 size as 1MB
-# echo 100000 >> bar0_size
-
-check for programmed bar0 size
-# cat bar0_size
-
-Program BAR0 Address as DDR (0x2100000). This is the physical address of
-memory, which is to be made visible to PCIe host. Similarly any other peripheral
-can also be made visible to PCIe host. E.g., if you program base address of UART
-as BAR0 address then when this device will be connected to a host, it will be
-visible as UART.
-# echo 2100000 >> bar0_address
-
-program interrupt type : INTA
-# echo INTA >> int_type
-
-go for link up now.
-# echo UP >> link
-
-It will have to be insured that, once link up is done on gadget, then only host
-is initialized and start to search PCIe devices on its port.
-
-/*wait till link is up*/
-# cat link
-wait till it returns UP.
-
-To assert INTA
-# echo 1 >> inta
-
-To de-assert INTA
-# echo 0 >> inta
-
-if MSI is to be used as interrupt, program no of msi vector needed (say4)
-# echo 4 >> no_of_msi
-
-select MSI as interrupt type
-# echo MSI >> int_type
-
-go for link up now
-# echo UP >> link
-
-wait till link is up
-# cat link
-An application can repetitively read this node till link is found UP. It can
-sleep between two read.
-
-wait till msi is enabled
-# cat no_of_msi
-Should return 4 (number of requested MSI vector)
-
-to send msi vector 2
-# echo 2 >> send_msi
-#cd -
-- 
2.24.1

[PATCH 07/11] docs: misc-devices/pci-endpoint-test.txt: convert to ReST

[Mauro Carvalho Chehab]

- use title markups;
- mark literal blocks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../{ad525x_dpot.txt => ad525x_dpot.rst}      | 24 +++++++++----------
 Documentation/misc-devices/index.rst          |  1 +
 2 files changed, 13 insertions(+), 12 deletions(-)
 rename Documentation/misc-devices/{ad525x_dpot.txt => ad525x_dpot.rst} (85%)

diff --git a/Documentation/misc-devices/ad525x_dpot.txt b/Documentation/misc-devices/ad525x_dpot.rst
similarity index 85%
rename from Documentation/misc-devices/ad525x_dpot.txt
rename to Documentation/misc-devices/ad525x_dpot.rst
index 0c9413b1cbf3..6483ec254520 100644
--- a/Documentation/misc-devices/ad525x_dpot.txt
+++ b/Documentation/misc-devices/ad525x_dpot.rst
@@ -1,6 +1,8 @@
----------------------------------
-  AD525x Digital Potentiometers
----------------------------------
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+AD525x Digital Potentiometers
+=============================
 
 The ad525x_dpot driver exports a simple sysfs interface.  This allows you to
 work with the immediate resistance settings as well as update the saved startup
@@ -8,9 +10,8 @@ settings.  Access to the factory programmed tolerance is also provided, but
 interpretation of this settings is required by the end application according to
 the specific part in use.
 
----------
-  Files
----------
+Files
+=====
 
 Each dpot device will have a set of eeprom, rdac, and tolerance files.  How
 many depends on the actual part you have, as will the range of allowed values.
@@ -24,23 +25,22 @@ and may vary greatly on a part-by-part basis.  For exact interpretation of
 this field, please consult the datasheet for your part.  This is presented
 as a hex file for easier parsing.
 
------------
-  Example
------------
+Example
+=======
 
 Locate the device in your sysfs tree.  This is probably easiest by going into
-the common i2c directory and locating the device by the i2c slave address.
+the common i2c directory and locating the device by the i2c slave address::
 
 	# ls /sys/bus/i2c/devices/
 	0-0022  0-0027  0-002f
 
 So assuming the device in question is on the first i2c bus and has the slave
-address of 0x2f, we descend (unrelated sysfs entries have been trimmed).
+address of 0x2f, we descend (unrelated sysfs entries have been trimmed)::
 
 	# ls /sys/bus/i2c/devices/0-002f/
 	eeprom0 rdac0 tolerance0
 
-You can use simple reads/writes to access these files:
+You can use simple reads/writes to access these files::
 
 	# cd /sys/bus/i2c/devices/0-002f/
 
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index 2d454b413aef..005547c1ad5d 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -14,6 +14,7 @@ fit into other categories.
 .. toctree::
    :maxdepth: 2
 
+   ad525x_dpot
    eeprom
    ibmvmc
    ics932s401
-- 
2.24.1

[PATCH 08/11] docs: misc-devices/pci-endpoint-test.txt: convert to ReST

[Mauro Carvalho Chehab]

- Use titles markups;
- Adjust identation;
- use literal markup;
- Use the proper notation for footnotes.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/misc-devices/index.rst          |  1 +
 .../misc-devices/pci-endpoint-test.rst        | 56 +++++++++++++++++++
 .../misc-devices/pci-endpoint-test.txt        | 41 --------------
 3 files changed, 57 insertions(+), 41 deletions(-)
 create mode 100644 Documentation/misc-devices/pci-endpoint-test.rst
 delete mode 100644 Documentation/misc-devices/pci-endpoint-test.txt

diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index 005547c1ad5d..04f5dab2384c 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -21,5 +21,6 @@ fit into other categories.
    isl29003
    lis3lv02d
    max6875
+   pci-endpoint-test
    spear-pcie-gadget
    xilinx_sdfec
diff --git a/Documentation/misc-devices/pci-endpoint-test.rst b/Documentation/misc-devices/pci-endpoint-test.rst
new file mode 100644
index 000000000000..26e5d9ba146b
--- /dev/null
+++ b/Documentation/misc-devices/pci-endpoint-test.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Driver for PCI Endpoint Test Function
+=====================================
+
+This driver should be used as a host side driver if the root complex is
+connected to a configurable PCI endpoint running ``pci_epf_test`` function
+driver configured according to [1]_.
+
+The "pci_endpoint_test" driver can be used to perform the following tests.
+
+The PCI driver for the test device performs the following tests:
+
+	#) verifying addresses programmed in BAR
+	#) raise legacy IRQ
+	#) raise MSI IRQ
+	#) raise MSI-X IRQ
+	#) read data
+	#) write data
+	#) copy data
+
+This misc driver creates /dev/pci-endpoint-test.<num> for every
+``pci_epf_test`` function connected to the root complex and "ioctls"
+should be used to perform the above tests.
+
+ioctl
+-----
+
+ PCITEST_BAR:
+	      Tests the BAR. The number of the BAR to be tested
+	      should be passed as argument.
+ PCITEST_LEGACY_IRQ:
+	      Tests legacy IRQ
+ PCITEST_MSI:
+	      Tests message signalled interrupts. The MSI number
+	      to be tested should be passed as argument.
+ PCITEST_MSIX:
+	      Tests message signalled interrupts. The MSI-X number
+	      to be tested should be passed as argument.
+ PCITEST_SET_IRQTYPE:
+	      Changes driver IRQ type configuration. The IRQ type
+	      should be passed as argument (0: Legacy, 1:MSI, 2:MSI-X).
+ PCITEST_GET_IRQTYPE:
+	      Gets driver IRQ type configuration.
+ PCITEST_WRITE:
+	      Perform write tests. The size of the buffer should be passed
+	      as argument.
+ PCITEST_READ:
+	      Perform read tests. The size of the buffer should be passed
+	      as argument.
+ PCITEST_COPY:
+	      Perform read tests. The size of the buffer should be passed
+	      as argument.
+
+.. [1] Documentation/PCI/endpoint/function/binding/pci-test.txt
diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt
deleted file mode 100644
index 58ccca4416b1..000000000000
--- a/Documentation/misc-devices/pci-endpoint-test.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Driver for PCI Endpoint Test Function
-
-This driver should be used as a host side driver if the root complex is
-connected to a configurable PCI endpoint running *pci_epf_test* function
-driver configured according to [1].
-
-The "pci_endpoint_test" driver can be used to perform the following tests.
-
-The PCI driver for the test device performs the following tests
-	*) verifying addresses programmed in BAR
-	*) raise legacy IRQ
-	*) raise MSI IRQ
-	*) raise MSI-X IRQ
-	*) read data
-	*) write data
-	*) copy data
-
-This misc driver creates /dev/pci-endpoint-test.<num> for every
-*pci_epf_test* function connected to the root complex and "ioctls"
-should be used to perform the above tests.
-
-ioctl
------
- PCITEST_BAR: Tests the BAR. The number of the BAR to be tested
-	      should be passed as argument.
- PCITEST_LEGACY_IRQ: Tests legacy IRQ
- PCITEST_MSI: Tests message signalled interrupts. The MSI number
-	      to be tested should be passed as argument.
- PCITEST_MSIX: Tests message signalled interrupts. The MSI-X number
-	      to be tested should be passed as argument.
- PCITEST_SET_IRQTYPE: Changes driver IRQ type configuration. The IRQ type
-	      should be passed as argument (0: Legacy, 1:MSI, 2:MSI-X).
- PCITEST_GET_IRQTYPE: Gets driver IRQ type configuration.
- PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
-		as argument.
- PCITEST_READ: Perform read tests. The size of the buffer should be passed
-	       as argument.
- PCITEST_COPY: Perform read tests. The size of the buffer should be passed
-	       as argument.
-
-[1] -> Documentation/PCI/endpoint/function/binding/pci-test.txt
-- 
2.24.1

[PATCH 09/11] docs: misc-devices/c2port.txt: convert to ReST format

[Mauro Carvalho Chehab]

- Use copyright symbol;
- use title markups;
- adjust indentation;
- mark literal blocks as such.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../misc-devices/{c2port.txt => c2port.rst}   | 58 ++++++++++---------
 Documentation/misc-devices/index.rst          |  1 +
 2 files changed, 32 insertions(+), 27 deletions(-)
 rename Documentation/misc-devices/{c2port.txt => c2port.rst} (59%)

diff --git a/Documentation/misc-devices/c2port.txt b/Documentation/misc-devices/c2port.rst
similarity index 59%
rename from Documentation/misc-devices/c2port.txt
rename to Documentation/misc-devices/c2port.rst
index ea7344465610..258e1c1d43c7 100644
--- a/Documentation/misc-devices/c2port.txt
+++ b/Documentation/misc-devices/c2port.rst
@@ -1,7 +1,11 @@
-			C2 port support
-			---------------
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
 
-(C) Copyright 2007 Rodolfo Giometti <giometti@enneenne.com>
+===============
+C2 port support
+===============
+
+|copy| Copyright 2007 Rodolfo Giometti <giometti@enneenne.com>
 
 This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -32,10 +36,10 @@ The C2 Interface main references are at (http://www.silabs.com)
 Silicon Laboratories site], see:
 
 - AN127: FLASH Programming via the C2 Interface at
-http://www.silabs.com/Support Documents/TechnicalDocs/an127.pdf 
+  http://www.silabs.com/Support Documents/TechnicalDocs/an127.pdf
 
 - C2 Specification at
-http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/an127.pdf&src=SearchResults
+  http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/an127.pdf&src=SearchResults
 
 however it implements a two wire serial communication protocol (bit
 banging) designed to enable in-system programming, debugging, and
@@ -47,44 +51,44 @@ Using the driver
 ----------------
 
 Once the driver is loaded you can use sysfs support to get C2port's
-info or read/write in-system flash.
+info or read/write in-system flash::
 
-# ls /sys/class/c2port/c2port0/
-access            flash_block_size  flash_erase       rev_id
-dev_id            flash_blocks_num  flash_size        subsystem/
-flash_access      flash_data        reset             uevent
+  # ls /sys/class/c2port/c2port0/
+  access            flash_block_size  flash_erase       rev_id
+  dev_id            flash_blocks_num  flash_size        subsystem/
+  flash_access      flash_data        reset             uevent
 
 Initially the C2port access is disabled since you hardware may have
 such lines multiplexed with other devices so, to get access to the
-C2port, you need the command:
+C2port, you need the command::
 
-# echo 1 > /sys/class/c2port/c2port0/access
+  # echo 1 > /sys/class/c2port/c2port0/access
 
 after that you should read the device ID and revision ID of the
-connected micro controller:
+connected micro controller::
 
-# cat /sys/class/c2port/c2port0/dev_id
-8
-# cat /sys/class/c2port/c2port0/rev_id
-1
+  # cat /sys/class/c2port/c2port0/dev_id
+  8
+  # cat /sys/class/c2port/c2port0/rev_id
+  1
 
 However, for security reasons, the in-system flash access in not
-enabled yet, to do so you need the command:
+enabled yet, to do so you need the command::
 
-# echo 1 > /sys/class/c2port/c2port0/flash_access
+  # echo 1 > /sys/class/c2port/c2port0/flash_access
 
-After that you can read the whole flash:
+After that you can read the whole flash::
 
-# cat /sys/class/c2port/c2port0/flash_data > image
+  # cat /sys/class/c2port/c2port0/flash_data > image
 
-erase it:
+erase it::
 
-# echo 1 > /sys/class/c2port/c2port0/flash_erase
+  # echo 1 > /sys/class/c2port/c2port0/flash_erase
 
-and write it:
+and write it::
 
-# cat image > /sys/class/c2port/c2port0/flash_data
+  # cat image > /sys/class/c2port/c2port0/flash_data
 
-after writing you have to reset the device to execute the new code:
+after writing you have to reset the device to execute the new code::
 
-# echo 1 > /sys/class/c2port/c2port0/reset
+  # echo 1 > /sys/class/c2port/c2port0/reset
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index 04f5dab2384c..c2e880d78734 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -16,6 +16,7 @@ fit into other categories.
 
    ad525x_dpot
    eeprom
+   c2port
    ibmvmc
    ics932s401
    isl29003
-- 
2.24.1

[PATCH 10/11] docs: misc-devices/bh1770glc.txt: convert to ReST

[Mauro Carvalho Chehab]

- Adjust document title markup;
- use list markups;
- Adjust identations to display properly at ReST output.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../{bh1770glc.txt => bh1770glc.rst}          | 45 +++++++++++++------
 Documentation/misc-devices/index.rst          |  1 +
 2 files changed, 33 insertions(+), 13 deletions(-)
 rename Documentation/misc-devices/{bh1770glc.txt => bh1770glc.rst} (83%)

diff --git a/Documentation/misc-devices/bh1770glc.txt b/Documentation/misc-devices/bh1770glc.rst
similarity index 83%
rename from Documentation/misc-devices/bh1770glc.txt
rename to Documentation/misc-devices/bh1770glc.rst
index 7d64c014dc70..ea5ca58bb958 100644
--- a/Documentation/misc-devices/bh1770glc.txt
+++ b/Documentation/misc-devices/bh1770glc.rst
@@ -1,9 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
 Kernel driver bh1770glc
 =======================
 
 Supported chips:
-ROHM BH1770GLC
-OSRAM SFH7770
+
+- ROHM BH1770GLC
+- OSRAM SFH7770
 
 Data sheet:
 Not freely available
@@ -48,12 +52,16 @@ chip_id
 	RO - shows detected chip type and version
 
 power_state
-	RW - enable / disable chip. Uses counting logic
-	     1 enables the chip
-	     0 disables the chip
+	RW - enable / disable chip
+
+	Uses counting logic
+
+	     - 1 enables the chip
+	     - 0 disables the chip
 
 lux0_input
 	RO - measured lux value
+
 	     sysfs_notify called when threshold interrupt occurs
 
 lux0_sensor_range
@@ -66,16 +74,22 @@ lux0_rate_avail
 	RO - supported measurement rates
 
 lux0_thresh_above_value
-	RW - HI level threshold value. All results above the value
+	RW - HI level threshold value
+
+	     All results above the value
 	     trigs an interrupt. 65535 (i.e. sensor_range) disables the above
 	     interrupt.
 
 lux0_thresh_below_value
-	RW - LO level threshold value. All results below the value
+	RW - LO level threshold value
+
+	     All results below the value
 	     trigs an interrupt. 0 disables the below interrupt.
 
 lux0_calibscale
-	RW - calibration value. Set to neutral value by default.
+	RW - calibration value
+
+	     Set to neutral value by default.
 	     Output results are multiplied with calibscale / calibscale_default
 	     value.
 
@@ -84,32 +98,37 @@ lux0_calibscale_default
 
 prox0_raw
 	RO - measured proximity value
+
 	     sysfs_notify called when threshold interrupt occurs
 
 prox0_sensor_range
 	RO - prox0_raw max value
 
 prox0_raw_en
-	RW - enable / disable proximity - uses counting logic
-	     1 enables the proximity
-	     0 disables the proximity
+	RW - enable / disable proximity
+
+	     Uses counting logic
+
+	     - 1 enables the proximity
+	     - 0 disables the proximity
 
 prox0_thresh_above_count
 	RW - number of proximity interrupts needed before triggering the event
 
 prox0_rate_above
 	RW - Measurement rate (in Hz) when the level is above threshold
-	     i.e. when proximity on has been reported.
+	i.e. when proximity on has been reported.
 
 prox0_rate_below
 	RW - Measurement rate (in Hz) when the level is below threshold
-	     i.e. when proximity off has been reported.
+	i.e. when proximity off has been reported.
 
 prox0_rate_avail
 	RO - Supported proximity measurement rates in Hz
 
 prox0_thresh_above0_value
 	RW - threshold level which trigs proximity events.
+
 	     Filtered by persistence filter (prox0_thresh_above_count)
 
 prox0_thresh_above1_value
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index c2e880d78734..40a4c104e7a2 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -15,6 +15,7 @@ fit into other categories.
    :maxdepth: 2
 
    ad525x_dpot
+   bh1770glc
    eeprom
    c2port
    ibmvmc
-- 
2.24.1

[PATCH 11/11] docs: misc-devices/apds990x.txt: convert to ReST format

[Mauro Carvalho Chehab]

- Adjust title markup;
- Adjust identation.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../{apds990x.txt => apds990x.rst}            | 31 ++++++++++++++-----
 Documentation/misc-devices/index.rst          |  1 +
 2 files changed, 25 insertions(+), 7 deletions(-)
 rename Documentation/misc-devices/{apds990x.txt => apds990x.rst} (86%)

diff --git a/Documentation/misc-devices/apds990x.txt b/Documentation/misc-devices/apds990x.rst
similarity index 86%
rename from Documentation/misc-devices/apds990x.txt
rename to Documentation/misc-devices/apds990x.rst
index 454d95d623b3..e2f75577f731 100644
--- a/Documentation/misc-devices/apds990x.txt
+++ b/Documentation/misc-devices/apds990x.rst
@@ -1,3 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
 Kernel driver apds990x
 ======================
 
@@ -50,14 +53,18 @@ chip_id
 
 power_state
 	RW - enable / disable chip. Uses counting logic
+
 	     1 enables the chip
 	     0 disables the chip
 lux0_input
 	RO - measured lux value
+
 	     sysfs_notify called when threshold interrupt occurs
 
 lux0_sensor_range
-	RO - lux0_input max value. Actually never reaches since sensor tends
+	RO - lux0_input max value.
+
+	     Actually never reaches since sensor tends
 	     to saturate much before that. Real max value varies depending
 	     on the light spectrum etc.
 
@@ -68,7 +75,9 @@ lux0_rate_avail
 	RO - supported measurement rates
 
 lux0_calibscale
-	RW - calibration value. Set to neutral value by default.
+	RW - calibration value.
+
+	     Set to neutral value by default.
 	     Output results are multiplied with calibscale / calibscale_default
 	     value.
 
@@ -76,16 +85,21 @@ lux0_calibscale_default
 	RO - neutral calibration value
 
 lux0_thresh_above_value
-	RW - HI level threshold value. All results above the value
+	RW - HI level threshold value.
+
+	     All results above the value
 	     trigs an interrupt. 65535 (i.e. sensor_range) disables the above
 	     interrupt.
 
 lux0_thresh_below_value
-	RW - LO level threshold value. All results below the value
+	RW - LO level threshold value.
+
+	     All results below the value
 	     trigs an interrupt. 0 disables the below interrupt.
 
 prox0_raw
 	RO - measured proximity value
+
 	     sysfs_notify called when threshold interrupt occurs
 
 prox0_sensor_range
@@ -93,11 +107,14 @@ prox0_sensor_range
 
 prox0_raw_en
 	RW - enable / disable proximity - uses counting logic
-	     1 enables the proximity
-	     0 disables the proximity
+
+	     - 1 enables the proximity
+	     - 0 disables the proximity
 
 prox0_reporting_mode
-	RW - trigger / periodic. In "trigger" mode the driver tells two possible
+	RW - trigger / periodic.
+
+	     In "trigger" mode the driver tells two possible
 	     values: 0 or prox0_sensor_range value. 0 means no proximity,
 	     1023 means proximity. This causes minimal number of interrupts.
 	     In "periodic" mode the driver reports all values above
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index 40a4c104e7a2..16973310d32e 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -15,6 +15,7 @@ fit into other categories.
    :maxdepth: 2
 
    ad525x_dpot
+   apds990x
    bh1770glc
    eeprom
    c2port
-- 
2.24.1

Re: [PATCH 02/11] docs: crypto: convert asymmetric-keys.txt to ReST

[Ben Boeckel]

On Thu, Feb 06, 2020 at 16:11:21 +0100, Mauro Carvalho Chehab wrote:
> - (1) If the criterion string is of the form "id:<hexdigits>" then the match
> +  1) If the criterion string is of the form "id:<hexdigits>" then the match

This update was followed in all the enumeration changes except…

> - (2) If the criterion string is of the form "<subtype>:<hexdigits>" then the
> + 2) If the criterion string is of the form "<subtype>:<hexdigits>" then the

The whitespace here doesn't match up. Which is preferred?

> - (1) Signature verification.
> +1) Signature verification.

Here, the indentation was lost too. Is this intentional?

--Ben

Re: [PATCH 02/11] docs: crypto: convert asymmetric-keys.txt to ReST

[Mauro Carvalho Chehab]

Em Thu, 6 Feb 2020 15:09:11 -0500
Ben Boeckel <mathstuf@gmail.com> escreveu:

> On Thu, Feb 06, 2020 at 16:11:21 +0100, Mauro Carvalho Chehab wrote:
> > - (1) If the criterion string is of the form "id:<hexdigits>" then the match
> > +  1) If the criterion string is of the form "id:<hexdigits>" then the match  
> 
> This update was followed in all the enumeration changes except…
> 
> > - (2) If the criterion string is of the form "<subtype>:<hexdigits>" then the
> > + 2) If the criterion string is of the form "<subtype>:<hexdigits>" then the  
> 
> The whitespace here doesn't match up. Which is preferred?

That was a mistake.

> 
> > - (1) Signature verification.
> > +1) Signature verification.  
> 
> Here, the indentation was lost too. Is this intentional?

Both ways would work. I'll keep the original indentation for the next
version. Thanks for pointing it.

Cheers,
Mauro