* [PATCH 1/3] EDAC: synopsys: Remove pinf->col parameter for ZynqMP and i.MX8MP
2020-02-24 9:42 [PATCH 0/3] Improve the output message for CE/UE Sherry Sun
@ 2020-02-24 9:42 ` Sherry Sun
2020-02-24 9:42 ` [PATCH 2/3] EDAC: synopsys: Reorganizing the output message for CE/UE Sherry Sun
2020-02-24 9:42 ` [PATCH 3/3] EDAC: synopsys: Add useful output information for 64 bit systems Sherry Sun
2 siblings, 0 replies; 6+ messages in thread
From: Sherry Sun @ 2020-02-24 9:42 UTC (permalink / raw)
To: bp, mchehab, tony.luck, james.morse, rrichter, michal.simek
Cc: linux-edac, linux-arm-kernel, linux-kernel, linux-imx, frank.li
Since ZynqMP and i.MX8MP platform both call zynqmp_get_error_info()
function to get ce/ue information. In this function, pinf->col parameter
is not used, this parameter is only used by Zynq platforme. So here
pinf->col should not be called and printed for ZynqMP and i.MX8MP.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
drivers/edac/synopsys_edac.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 66c801502212..7046b8929522 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -492,8 +492,8 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
pinf->bitpos, pinf->data);
} else {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type:%s Row %d Bank %d Col %d ",
- "CE", pinf->row, pinf->bank, pinf->col);
+ "DDR ECC error type:%s Row %d Bank %d ",
+ "CE", pinf->row, pinf->bank);
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
"BankGroup Number %d Block Number %d ",
pinf->bankgrpnr, pinf->blknr);
@@ -515,8 +515,8 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
"UE", pinf->row, pinf->bank, pinf->col);
} else {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type :%s Row %d Bank %d Col %d ",
- "UE", pinf->row, pinf->bank, pinf->col);
+ "DDR ECC error type :%s Row %d Bank %d ",
+ "UE", pinf->row, pinf->bank);
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
"BankGroup Number %d Block Number %d",
pinf->bankgrpnr, pinf->blknr);
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/3] EDAC: synopsys: Reorganizing the output message for CE/UE
2020-02-24 9:42 [PATCH 0/3] Improve the output message for CE/UE Sherry Sun
2020-02-24 9:42 ` [PATCH 1/3] EDAC: synopsys: Remove pinf->col parameter for ZynqMP and i.MX8MP Sherry Sun
@ 2020-02-24 9:42 ` Sherry Sun
2020-02-26 17:49 ` James Morse
2020-02-24 9:42 ` [PATCH 3/3] EDAC: synopsys: Add useful output information for 64 bit systems Sherry Sun
2 siblings, 1 reply; 6+ messages in thread
From: Sherry Sun @ 2020-02-24 9:42 UTC (permalink / raw)
To: bp, mchehab, tony.luck, james.morse, rrichter, michal.simek
Cc: linux-edac, linux-arm-kernel, linux-kernel, linux-imx, frank.li
The origin way which call sprintf() function two or three times to
output message for CE/UE is incorrect, because it won't output all the
message needed, instead it will only output the last message in
sprintf(). So the simplest and most effective way to fix this problem
is reorganizing all the output message needed for CE/UE into one
sprintf() function.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
drivers/edac/synopsys_edac.c | 22 +++++++---------------
1 file changed, 7 insertions(+), 15 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 7046b8929522..ef7e907c7956 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -485,20 +485,14 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
pinf = &p->ceinfo;
if (!priv->p_data->quirks) {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type:%s Row %d Bank %d Col %d ",
- "CE", pinf->row, pinf->bank, pinf->col);
- snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "Bit Position: %d Data: 0x%08x\n",
+ "DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
+ "CE", pinf->row, pinf->bank, pinf->col,
pinf->bitpos, pinf->data);
} else {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type:%s Row %d Bank %d ",
- "CE", pinf->row, pinf->bank);
- snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "BankGroup Number %d Block Number %d ",
- pinf->bankgrpnr, pinf->blknr);
- snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "Bit Position: %d Data: 0x%08x\n",
+ "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
+ "CE", pinf->row, pinf->bank,
+ pinf->bankgrpnr, pinf->blknr,
pinf->bitpos, pinf->data);
}
@@ -515,10 +509,8 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
"UE", pinf->row, pinf->bank, pinf->col);
} else {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type :%s Row %d Bank %d ",
- "UE", pinf->row, pinf->bank);
- snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "BankGroup Number %d Block Number %d",
+ "DDR ECC error type :%s Row %d Bank %d BankGroup Number %d Block Number %d",
+ "UE", pinf->row, pinf->bank,
pinf->bankgrpnr, pinf->blknr);
}
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 2/3] EDAC: synopsys: Reorganizing the output message for CE/UE
2020-02-24 9:42 ` [PATCH 2/3] EDAC: synopsys: Reorganizing the output message for CE/UE Sherry Sun
@ 2020-02-26 17:49 ` James Morse
2020-02-27 7:09 ` Sherry Sun
0 siblings, 1 reply; 6+ messages in thread
From: James Morse @ 2020-02-26 17:49 UTC (permalink / raw)
To: Sherry Sun
Cc: bp, mchehab, tony.luck, rrichter, michal.simek, linux-edac,
linux-arm-kernel, linux-kernel, linux-imx, frank.li
Hi Sherry,
On 24/02/2020 09:42, Sherry Sun wrote:
> The origin way which call sprintf() function two or three times to
(original? 'The current way' may be better)
> output message for CE/UE is incorrect, because it won't output all the
> message needed, instead it will only output the last message in
> sprintf().
Nice!
> So the simplest and most effective way to fix this problem
> is reorganizing all the output message needed for CE/UE into one
> sprintf() function.
This is a bug, but its in the middle of a series doing some cleanup, meaning the
maintainer can't easily pick it up in isolation. Could you post it separately?
'Reorganize' in the subject makes this sound like cleanup. Would "EDAC: synopsys: Fix back
to back snprintf() messages for CE/UE" be better?
Please add:
Fixes: b500b4a029d57 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
in the signed-off-by area so that stable trees pick this up.
and for what its worth:
Reviewed-by: James Morse <james.morse@arm.com>
Thanks!
James
> diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
> index 7046b8929522..ef7e907c7956 100644
> --- a/drivers/edac/synopsys_edac.c
> +++ b/drivers/edac/synopsys_edac.c
> @@ -485,20 +485,14 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
> pinf = &p->ceinfo;
> if (!priv->p_data->quirks) {
> snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> - "DDR ECC error type:%s Row %d Bank %d Col %d ",
> - "CE", pinf->row, pinf->bank, pinf->col);
> - snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> - "Bit Position: %d Data: 0x%08x\n",
> + "DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
> + "CE", pinf->row, pinf->bank, pinf->col,
> pinf->bitpos, pinf->data);
> } else {
> snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> - "DDR ECC error type:%s Row %d Bank %d ",
> - "CE", pinf->row, pinf->bank);
> - snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> - "BankGroup Number %d Block Number %d ",
> - pinf->bankgrpnr, pinf->blknr);
> - snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> - "Bit Position: %d Data: 0x%08x\n",
> + "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
> + "CE", pinf->row, pinf->bank,
> + pinf->bankgrpnr, pinf->blknr,
> pinf->bitpos, pinf->data);
> }
>
> @@ -515,10 +509,8 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
> "UE", pinf->row, pinf->bank, pinf->col);
> } else {
> snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> - "DDR ECC error type :%s Row %d Bank %d ",
> - "UE", pinf->row, pinf->bank);
> - snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> - "BankGroup Number %d Block Number %d",
> + "DDR ECC error type :%s Row %d Bank %d BankGroup Number %d Block Number %d",
> + "UE", pinf->row, pinf->bank,
> pinf->bankgrpnr, pinf->blknr);
> }
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread* RE: [PATCH 2/3] EDAC: synopsys: Reorganizing the output message for CE/UE
2020-02-26 17:49 ` James Morse
@ 2020-02-27 7:09 ` Sherry Sun
0 siblings, 0 replies; 6+ messages in thread
From: Sherry Sun @ 2020-02-27 7:09 UTC (permalink / raw)
To: James Morse
Cc: bp, mchehab, tony.luck, rrichter, michal.simek, linux-edac,
linux-arm-kernel, linux-kernel, dl-linux-imx, Frank Li
Hi James,
> -----Original Message-----
> From: linux-edac-owner@vger.kernel.org <linux-edac-
> owner@vger.kernel.org> On Behalf Of James Morse
> Sent: 2020年2月27日 1:49
> To: Sherry Sun <sherry.sun@nxp.com>
> Cc: bp@alien8.de; mchehab@kernel.org; tony.luck@intel.com;
> rrichter@marvell.com; michal.simek@xilinx.com; linux-
> edac@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; Frank Li
> <frank.li@nxp.com>
> Subject: Re: [PATCH 2/3] EDAC: synopsys: Reorganizing the output message
> for CE/UE
>
> Hi Sherry,
>
> On 24/02/2020 09:42, Sherry Sun wrote:
> > The origin way which call sprintf() function two or three times to
>
> (original? 'The current way' may be better)
>
Sorry for that, I will correct it to 'The current way'.
>
> > output message for CE/UE is incorrect, because it won't output all the
> > message needed, instead it will only output the last message in
> > sprintf().
>
> Nice!
>
>
> > So the simplest and most effective way to fix this problem is
> > reorganizing all the output message needed for CE/UE into one
> > sprintf() function.
>
> This is a bug, but its in the middle of a series doing some cleanup, meaning
> the maintainer can't easily pick it up in isolation. Could you post it separately?
>
> 'Reorganize' in the subject makes this sound like cleanup. Would "EDAC:
> synopsys: Fix back to back snprintf() messages for CE/UE" be better?
>
Sure, I will send this patch separately, and will correct the subject as you suggested.
>
> Please add:
> Fixes: b500b4a029d57 ("EDAC, synopsys: Add ECC support for ZynqMP DDR
> controller")
>
> in the signed-off-by area so that stable trees pick this up.
>
> and for what its worth:
> Reviewed-by: James Morse <james.morse@arm.com>
>
>
Thanks, I will add it.
Best regards
Sherry Sun
> Thanks!
>
> James
>
>
>
> > diff --git a/drivers/edac/synopsys_edac.c
> > b/drivers/edac/synopsys_edac.c index 7046b8929522..ef7e907c7956
> 100644
> > --- a/drivers/edac/synopsys_edac.c
> > +++ b/drivers/edac/synopsys_edac.c
> > @@ -485,20 +485,14 @@ static void handle_error(struct mem_ctl_info
> *mci, struct synps_ecc_status *p)
> > pinf = &p->ceinfo;
> > if (!priv->p_data->quirks) {
> > snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> > - "DDR ECC error type:%s Row %d Bank %d
> Col %d ",
> > - "CE", pinf->row, pinf->bank, pinf->col);
> > - snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> > - "Bit Position: %d Data: 0x%08x\n",
> > + "DDR ECC error type:%s Row %d Bank %d
> Col %d Bit Position: %d Data: 0x%08x",
> > + "CE", pinf->row, pinf->bank, pinf->col,
> > pinf->bitpos, pinf->data);
> > } else {
> > snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> > - "DDR ECC error type:%s Row %d Bank %d ",
> > - "CE", pinf->row, pinf->bank);
> > - snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> > - "BankGroup Number %d Block Number %d ",
> > - pinf->bankgrpnr, pinf->blknr);
> > - snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> > - "Bit Position: %d Data: 0x%08x\n",
> > + "DDR ECC error type:%s Row %d Bank %d
> BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
> > + "CE", pinf->row, pinf->bank,
> > + pinf->bankgrpnr, pinf->blknr,
> > pinf->bitpos, pinf->data);
> > }
> >
> > @@ -515,10 +509,8 @@ static void handle_error(struct mem_ctl_info *mci,
> struct synps_ecc_status *p)
> > "UE", pinf->row, pinf->bank, pinf->col);
> > } else {
> > snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> > - "DDR ECC error type :%s Row %d Bank %d ",
> > - "UE", pinf->row, pinf->bank);
> > - snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
> > - "BankGroup Number %d Block Number %d",
> > + "DDR ECC error type :%s Row %d Bank %d
> BankGroup Number %d Block Number %d",
> > + "UE", pinf->row, pinf->bank,
> > pinf->bankgrpnr, pinf->blknr);
> > }
> >
> >
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 3/3] EDAC: synopsys: Add useful output information for 64 bit systems
2020-02-24 9:42 [PATCH 0/3] Improve the output message for CE/UE Sherry Sun
2020-02-24 9:42 ` [PATCH 1/3] EDAC: synopsys: Remove pinf->col parameter for ZynqMP and i.MX8MP Sherry Sun
2020-02-24 9:42 ` [PATCH 2/3] EDAC: synopsys: Reorganizing the output message for CE/UE Sherry Sun
@ 2020-02-24 9:42 ` Sherry Sun
2 siblings, 0 replies; 6+ messages in thread
From: Sherry Sun @ 2020-02-24 9:42 UTC (permalink / raw)
To: bp, mchehab, tony.luck, james.morse, rrichter, michal.simek
Cc: linux-edac, linux-arm-kernel, linux-kernel, linux-imx, frank.li
Now the synopsys_edac driver only support to output the 32-bit error
data, but for 64 bit systems, such as i.MX8MP, 64 bit error data is
needed. At the same time, when CE/UE happens, syndrome data is also
useful to showed to user. So here add data_high and syndrome data for
64-bit systems.
And in order to distinguish 64-bit systems and other systems, here
adjust the position of the zynqmp_get_dtype(), so we can called
this function to distinguish it. To ensure that functions of the same
function are in the same position, here adjust the position of the
zynq_get_dtype() too.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
drivers/edac/synopsys_edac.c | 182 ++++++++++++++++++++---------------
1 file changed, 102 insertions(+), 80 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index ef7e907c7956..ae541efefeb8 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -278,18 +278,22 @@
* @col: Column number.
* @bank: Bank number.
* @bitpos: Bit position.
- * @data: Data causing the error.
+ * @data_low: Low bit data causing the error.
+ * @data_high: High bit data causing the error(used for 64 bit systems).
* @bankgrpnr: Bank group number.
* @blknr: Block number.
+ * @syndrome: Syndrome of the error.
*/
struct ecc_error_info {
u32 row;
u32 col;
u32 bank;
u32 bitpos;
- u32 data;
+ u32 data_low;
+ u32 data_high;
u32 bankgrpnr;
u32 blknr;
+ u32 syndrome;
};
/**
@@ -354,6 +358,70 @@ struct synps_platform_data {
int quirks;
};
+/**
+ * zynq_get_dtype - Return the controller memory width.
+ * @base: DDR memory controller base address.
+ *
+ * Get the EDAC device type width appropriate for the current controller
+ * configuration.
+ *
+ * Return: a device type width enumeration.
+ */
+static enum dev_type zynq_get_dtype(const void __iomem *base)
+{
+ enum dev_type dt;
+ u32 width;
+
+ width = readl(base + CTRL_OFST);
+ width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT;
+
+ switch (width) {
+ case DDRCTL_WDTH_16:
+ dt = DEV_X2;
+ break;
+ case DDRCTL_WDTH_32:
+ dt = DEV_X4;
+ break;
+ default:
+ dt = DEV_UNKNOWN;
+ }
+
+ return dt;
+}
+
+/**
+ * zynqmp_get_dtype - Return the controller memory width.
+ * @base: DDR memory controller base address.
+ *
+ * Get the EDAC device type width appropriate for the current controller
+ * configuration.
+ *
+ * Return: a device type width enumeration.
+ */
+static enum dev_type zynqmp_get_dtype(const void __iomem *base)
+{
+ enum dev_type dt;
+ u32 width;
+
+ width = readl(base + CTRL_OFST);
+ width = (width & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT;
+ switch (width) {
+ case DDRCTL_EWDTH_16:
+ dt = DEV_X2;
+ break;
+ case DDRCTL_EWDTH_32:
+ dt = DEV_X4;
+ break;
+ case DDRCTL_EWDTH_64:
+ dt = DEV_X8;
+ break;
+ default:
+ dt = DEV_UNKNOWN;
+ }
+
+ return dt;
+}
+
/**
* zynq_get_error_info - Get the current ECC error info.
* @priv: DDR memory controller private instance data.
@@ -385,9 +453,9 @@ static int zynq_get_error_info(struct synps_edac_priv *priv)
p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
p->ceinfo.col = regval & ADDR_COL_MASK;
p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
- p->ceinfo.data = readl(base + CE_DATA_31_0_OFST);
+ p->ceinfo.data_low = readl(base + CE_DATA_31_0_OFST);
edac_dbg(3, "CE bit position: %d data: %d\n", p->ceinfo.bitpos,
- p->ceinfo.data);
+ p->ceinfo.data_low);
clearval = ECC_CTRL_CLR_CE_ERR;
ue_err:
@@ -399,7 +467,7 @@ static int zynq_get_error_info(struct synps_edac_priv *priv)
p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
p->ueinfo.col = regval & ADDR_COL_MASK;
p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
- p->ueinfo.data = readl(base + UE_DATA_31_0_OFST);
+ p->ueinfo.data_low = readl(base + UE_DATA_31_0_OFST);
clearval |= ECC_CTRL_CLR_UE_ERR;
out:
@@ -443,10 +511,14 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
p->ceinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
ECC_CEADDR1_BNKGRP_SHIFT;
p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
- p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
- edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n",
- readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST),
- readl(base + ECC_CSYND2_OFST));
+ p->ceinfo.data_low = readl(base + ECC_CSYND0_OFST);
+ if (zynqmp_get_dtype(base) == DEV_X8) {
+ p->ceinfo.data_high = readl(base + ECC_CSYND1_OFST);
+ p->ceinfo.syndrome = readl(base + ECC_CSYND2_OFST);
+ edac_dbg(2, "CE data_low: 0x%08X data_high: 0x%08X syndrome: 0x%08X\n",
+ p->ceinfo.data_low, p->ceinfo.data_high,
+ p->ceinfo.syndrome);
+ }
ue_err:
if (!p->ue_cnt)
goto out;
@@ -459,7 +531,14 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
ECC_CEADDR1_BNKNR_SHIFT;
p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
- p->ueinfo.data = readl(base + ECC_UESYND0_OFST);
+ p->ueinfo.data_low = readl(base + ECC_UESYND0_OFST);
+ if (zynqmp_get_dtype(base) == DEV_X8) {
+ p->ueinfo.data_high = readl(base + ECC_UESYND1_OFST);
+ p->ueinfo.syndrome = readl(base + ECC_UESYND2_OFST);
+ edac_dbg(2, "UE data_low: 0x%08X data_high: 0x%08X syndrome: 0x%08X\n",
+ p->ueinfo.data_low, p->ueinfo.data_high,
+ p->ueinfo.syndrome);
+ }
out:
clearval = ECC_CTRL_CLR_CE_ERR | ECC_CTRL_CLR_CE_ERRCNT;
clearval |= ECC_CTRL_CLR_UE_ERR | ECC_CTRL_CLR_UE_ERRCNT;
@@ -480,6 +559,7 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
{
struct synps_edac_priv *priv = mci->pvt_info;
struct ecc_error_info *pinf;
+ int n;
if (p->ce_cnt) {
pinf = &p->ceinfo;
@@ -487,13 +567,19 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
"DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
"CE", pinf->row, pinf->bank, pinf->col,
- pinf->bitpos, pinf->data);
+ pinf->bitpos, pinf->data_low);
} else {
- snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
- "CE", pinf->row, pinf->bank,
- pinf->bankgrpnr, pinf->blknr,
- pinf->bitpos, pinf->data);
+ n = snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+ "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
+ "CE", pinf->row, pinf->bank,
+ pinf->bankgrpnr, pinf->blknr,
+ pinf->bitpos, pinf->data_low);
+
+ if (zynqmp_get_dtype(priv->baseaddr) == DEV_X8)
+ snprintf(priv->message + n,
+ SYNPS_EDAC_MSG_SIZE - n,
+ " Data_high: 0x%08x Syndrome: 0x%08x",
+ pinf->data_high, pinf->syndrome);
}
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
@@ -636,70 +722,6 @@ static void check_errors(struct mem_ctl_info *mci)
priv->ce_cnt, priv->ue_cnt);
}
-/**
- * zynq_get_dtype - Return the controller memory width.
- * @base: DDR memory controller base address.
- *
- * Get the EDAC device type width appropriate for the current controller
- * configuration.
- *
- * Return: a device type width enumeration.
- */
-static enum dev_type zynq_get_dtype(const void __iomem *base)
-{
- enum dev_type dt;
- u32 width;
-
- width = readl(base + CTRL_OFST);
- width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT;
-
- switch (width) {
- case DDRCTL_WDTH_16:
- dt = DEV_X2;
- break;
- case DDRCTL_WDTH_32:
- dt = DEV_X4;
- break;
- default:
- dt = DEV_UNKNOWN;
- }
-
- return dt;
-}
-
-/**
- * zynqmp_get_dtype - Return the controller memory width.
- * @base: DDR memory controller base address.
- *
- * Get the EDAC device type width appropriate for the current controller
- * configuration.
- *
- * Return: a device type width enumeration.
- */
-static enum dev_type zynqmp_get_dtype(const void __iomem *base)
-{
- enum dev_type dt;
- u32 width;
-
- width = readl(base + CTRL_OFST);
- width = (width & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT;
- switch (width) {
- case DDRCTL_EWDTH_16:
- dt = DEV_X2;
- break;
- case DDRCTL_EWDTH_32:
- dt = DEV_X4;
- break;
- case DDRCTL_EWDTH_64:
- dt = DEV_X8;
- break;
- default:
- dt = DEV_UNKNOWN;
- }
-
- return dt;
-}
-
/**
* zynq_get_ecc_state - Return the controller ECC enable/disable status.
* @base: DDR memory controller base address.
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread