Linux-EDAC Archive on lore.kernel.org
 help / color / Atom feed
From: Sherry Sun <sherry.sun@nxp.com>
To: bp@alien8.de, mchehab@kernel.org, tony.luck@intel.com,
	james.morse@arm.com, rrichter@marvell.com,
	michal.simek@xilinx.com, manish.narani@xilinx.com
Cc: linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org,
	frank.li@nxp.com
Subject: [PATCH v2 0/4] Add edac driver for i.MX8MP based on synopsys edac driver
Date: Wed,  1 Apr 2020 15:39:05 +0800
Message-ID: <1585726749-13039-1-git-send-email-sherry.sun@nxp.com> (raw)

This patchset add edac driver support for i.MX8MP, since i.MX8MP use the same
synopsys memory controller with ZynqMP, so the driver is based on synopsys_edac
driver.

Considering that i.MX8MP dts file is still in kernel/git/shawnguo/linux.git and
isn't in mainline now, I will add EDAC node in i.MX8MP dts after this file is
pushed to mainline. 

And the edac driver for i.MX8MP has been tested in kernel/git/shawnguo/linux.git
where i.MX8MP is supported, it turns out that this driver works well to detect
corrected and uncorrected errors for LPDDR4 in i.MX8MP.

Changes since v1:
=================
- Reorganized the patchset, no content changes. 

Sherry Sun (4):
  dt-bindings: memory-controllers: Add i.MX8MP DDRC binding doc
  EDAC: Add synopsys edac driver support for i.MX8MP
  EDAC: synopsys: Add edac driver support for i.MX8MP
  EDAC: synopsys: Add useful debug and output information for 64bit
    systems

 .../bindings/memory-controllers/synopsys.txt  |   8 +-
 drivers/edac/Kconfig                          |   2 +-
 drivers/edac/synopsys_edac.c                  | 259 ++++++++++++------
 3 files changed, 185 insertions(+), 84 deletions(-)

-- 
2.17.1


             reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-01  7:39 Sherry Sun [this message]
2020-04-01  7:39 ` [PATCH v2 1/4] dt-bindings: memory-controllers: Add i.MX8MP DDRC binding doc Sherry Sun
2020-04-01  7:39 ` [PATCH v2 2/4] EDAC: Add synopsys edac driver support for i.MX8MP Sherry Sun
2020-04-01  7:39 ` [PATCH v2 3/4] EDAC: synopsys: Add " Sherry Sun
2020-04-01  7:39 ` [PATCH v2 4/4] EDAC: synopsys: Add useful debug and output information for 64bit systems Sherry Sun
2020-04-01 10:56   ` Robert Richter
2020-04-01 14:32     ` Sherry Sun
2020-04-02  7:20       ` Robert Richter
2020-04-02  8:44         ` Sherry Sun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1585726749-13039-1-git-send-email-sherry.sun@nxp.com \
    --to=sherry.sun@nxp.com \
    --cc=bp@alien8.de \
    --cc=frank.li@nxp.com \
    --cc=james.morse@arm.com \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manish.narani@xilinx.com \
    --cc=mchehab@kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=rrichter@marvell.com \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-EDAC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-edac/0 linux-edac/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-edac linux-edac/ https://lore.kernel.org/linux-edac \
		linux-edac@vger.kernel.org
	public-inbox-index linux-edac

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-edac


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git