[PATCH AUTOSEL 5.3 036/203] EDAC/mc: Fix grain_bits calculation

[PATCH AUTOSEL 5.3 036/203] EDAC/mc: Fix grain_bits calculation

[Sasha Levin]

From: Robert Richter <rrichter@marvell.com>

[ Upstream commit 3724ace582d9f675134985727fd5e9811f23c059 ]

The grain in EDAC is defined as "minimum granularity for an error
report, in bytes". The following calculation of the grain_bits in
edac_mc is wrong:

	grain_bits = fls_long(e->grain) + 1;

Where grain_bits is defined as:

	grain = 1 << grain_bits

Example:

	grain = 8	# 64 bit (8 bytes)
	grain_bits = fls_long(8) + 1
	grain_bits = 4 + 1 = 5

	grain = 1 << grain_bits
	grain = 1 << 5 = 32

Replace it with the correct calculation:

	grain_bits = fls_long(e->grain - 1);

The example gives now:

	grain_bits = fls_long(8 - 1)
	grain_bits = fls_long(7)
	grain_bits = 3

	grain = 1 << 3 = 8

Also, check if the hardware reports a reasonable grain != 0 and fallback
with a warning to 1 byte granularity otherwise.

 [ bp: massage a bit. ]

Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190624150758.6695-2-rrichter@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/edac_mc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 64922c8fa7e3b..d899d86897d06 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -1235,9 +1235,13 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 	if (p > e->location)
 		*(p - 1) = '\0';
 
-	/* Report the error via the trace interface */
-	grain_bits = fls_long(e->grain) + 1;
+	/* Sanity-check driver-supplied grain value. */
+	if (WARN_ON_ONCE(!e->grain))
+		e->grain = 1;
+
+	grain_bits = fls_long(e->grain - 1);
 
+	/* Report the error via the trace interface */
 	if (IS_ENABLED(CONFIG_RAS))
 		trace_mc_event(type, e->msg, e->label, e->error_count,
 			       mci->mc_idx, e->top_layer, e->mid_layer,
-- 
2.20.1

[PATCH AUTOSEL 5.3 047/203] EDAC/altera: Use the proper type for the IRQ status bits

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8faa1cf6ed82f33009f63986c3776cc48af1b7b2 ]

Smatch complains about the cast of a u32 pointer to unsigned long:

  drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler()
  warn: passing casted pointer '&irq_status' to 'find_first_bit()'

This code wouldn't work on a 64 bit big endian system because it would
read past the end of &irq_status.

 [ bp: massage. ]

Fixes: 13ab8448d2c9 ("EDAC, altera: Add ECC Manager IRQ controller support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190624134717.GA1754@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/altera_edac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index c2e693e34d434..bf024ec0116c7 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1866,6 +1866,7 @@ static void altr_edac_a10_irq_handler(struct irq_desc *desc)
 	struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	int irq = irq_desc_get_irq(desc);
+	unsigned long bits;
 
 	dberr = (irq == edac->db_irq) ? 1 : 0;
 	sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST :
@@ -1875,7 +1876,8 @@ static void altr_edac_a10_irq_handler(struct irq_desc *desc)
 
 	regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status);
 
-	for_each_set_bit(bit, (unsigned long *)&irq_status, 32) {
+	bits = irq_status;
+	for_each_set_bit(bit, &bits, 32) {
 		irq = irq_linear_revmap(edac->domain, dberr * 32 + bit);
 		if (irq)
 			generic_handle_irq(irq);
-- 
2.20.1

[PATCH AUTOSEL 5.3 055/203] RAS: Fix prototype warnings

[Sasha Levin]

From: Valdis Klētnieks <valdis.kletnieks@vt.edu>

[ Upstream commit 0a54b809a3a2c31e1055b45b03708eb730222be1 ]

When building with C=2 and/or W=1, legitimate warnings are issued about
missing prototypes:

    CHECK   drivers/ras/debugfs.c
  drivers/ras/debugfs.c:4:15: warning: symbol 'ras_debugfs_dir' was not declared. Should it be static?
  drivers/ras/debugfs.c:8:5: warning: symbol 'ras_userspace_consumers' was not declared. Should it be static?
  drivers/ras/debugfs.c:38:12: warning: symbol 'ras_add_daemon_trace' was not declared. Should it be static?
  drivers/ras/debugfs.c:54:13: warning: symbol 'ras_debugfs_init' was not declared. Should it be static?
    CC      drivers/ras/debugfs.o
  drivers/ras/debugfs.c:8:5: warning: no previous prototype for 'ras_userspace_consumers' [-Wmissing-prototypes]
      8 | int ras_userspace_consumers(void)
        |     ^~~~~~~~~~~~~~~~~~~~~~~
  drivers/ras/debugfs.c:38:12: warning: no previous prototype for 'ras_add_daemon_trace' [-Wmissing-prototypes]
     38 | int __init ras_add_daemon_trace(void)
        |            ^~~~~~~~~~~~~~~~~~~~
  drivers/ras/debugfs.c:54:13: warning: no previous prototype for 'ras_debugfs_init' [-Wmissing-prototypes]
     54 | void __init ras_debugfs_init(void)
        |             ^~~~~~~~~~~~~~~~

Provide the proper includes.

 [ bp: Take care of the same warnings for cec.c too. ]

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/7168.1565218769@turing-police
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ras/cec.c     | 1 +
 drivers/ras/debugfs.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/ras/cec.c b/drivers/ras/cec.c
index 5d545806d9303..c09cf55e2d204 100644
--- a/drivers/ras/cec.c
+++ b/drivers/ras/cec.c
@@ -4,6 +4,7 @@
  */
 #include <linux/mm.h>
 #include <linux/gfp.h>
+#include <linux/ras.h>
 #include <linux/kernel.h>
 #include <linux/workqueue.h>
 
diff --git a/drivers/ras/debugfs.c b/drivers/ras/debugfs.c
index 9c1b717efad86..0d4f985afbf37 100644
--- a/drivers/ras/debugfs.c
+++ b/drivers/ras/debugfs.c
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 #include <linux/debugfs.h>
+#include <linux/ras.h>
+#include "debugfs.h"
 
 struct dentry *ras_debugfs_dir;
 
-- 
2.20.1

[PATCH AUTOSEL 5.3 056/203] RAS: Build debugfs.o only when enabled in Kconfig

[Sasha Levin]

From: Valdis Kletnieks <valdis.kletnieks@vt.edu>

[ Upstream commit b6ff24f7b5101101ff897dfdde3f37924e676bc2 ]

In addition, the 0day bot reported this build error:

  >> drivers/ras/debugfs.c:10:5: error: redefinition of 'ras_userspace_consumers'
      int ras_userspace_consumers(void)
          ^~~~~~~~~~~~~~~~~~~~~~~
     In file included from drivers/ras/debugfs.c:3:0:
     include/linux/ras.h:14:19: note: previous definition of 'ras_userspace_consumers' was here
      static inline int ras_userspace_consumers(void) { return 0; }
                      ^~~~~~~~~~~~~~~~~~~~~~~

for a riscv-specific .config where CONFIG_DEBUG_FS is not set. Fix all
that by making debugfs.o depend on that define.

 [ bp: Rewrite commit message. ]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/7053.1565218556@turing-police
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ras/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ras/Makefile b/drivers/ras/Makefile
index ef6777e14d3df..6f0404f501071 100644
--- a/drivers/ras/Makefile
+++ b/drivers/ras/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_RAS)	+= ras.o debugfs.o
+obj-$(CONFIG_RAS)	+= ras.o
+obj-$(CONFIG_DEBUG_FS)	+= debugfs.o
 obj-$(CONFIG_RAS_CEC)	+= cec.o
-- 
2.20.1

[PATCH AUTOSEL 5.3 061/203] EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()

[Sasha Levin]

From: Stephen Douthit <stephend@silicom-usa.com>

[ Upstream commit 29a3388bfcce7a6d087051376ea02bf8326a957b ]

Depending on how BIOS has marked the reserved region containing the 32KB
MCHBAR you can get warnings like:

resource sanity check: requesting [mem 0xfed10000-0xfed1ffff], which spans more than reserved [mem 0xfed10000-0xfed17fff]
caller dnv_rd_reg+0xc8/0x240 [pnd2_edac] mapping multiple BARs

Not all of the mmio regions used in dnv_rd_reg() are the same size.  The
MCHBAR window is 32KB and the sideband ports are 64KB.  Pass the correct
size to ioremap() depending on which resource we're reading from.

Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/pnd2_edac.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c
index ca25f8fe57ef3..1ad538baaa4a9 100644
--- a/drivers/edac/pnd2_edac.c
+++ b/drivers/edac/pnd2_edac.c
@@ -260,11 +260,14 @@ static u64 get_sideband_reg_base_addr(void)
 	}
 }
 
+#define DNV_MCHBAR_SIZE  0x8000
+#define DNV_SB_PORT_SIZE 0x10000
 static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
 {
 	struct pci_dev *pdev;
 	char *base;
 	u64 addr;
+	unsigned long size;
 
 	if (op == 4) {
 		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
@@ -279,15 +282,17 @@ static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *na
 			addr = get_mem_ctrl_hub_base_addr();
 			if (!addr)
 				return -ENODEV;
+			size = DNV_MCHBAR_SIZE;
 		} else {
 			/* MMIO via sideband register base address */
 			addr = get_sideband_reg_base_addr();
 			if (!addr)
 				return -ENODEV;
 			addr += (port << 16);
+			size = DNV_SB_PORT_SIZE;
 		}
 
-		base = ioremap((resource_size_t)addr, 0x10000);
+		base = ioremap((resource_size_t)addr, size);
 		if (!base)
 			return -ENODEV;
 
-- 
2.20.1

[PATCH AUTOSEL 5.3 111/203] EDAC/amd64: Support more than two controllers for chip selects handling

[Sasha Levin]

From: Yazen Ghannam <yazen.ghannam@amd.com>

[ Upstream commit d971e28e2ce4696fcc32998c8aced5e47701fffe ]

The struct chip_select array that's used for saving chip select bases
and masks is fixed at length of two. There should be one struct
chip_select for each controller, so this array should be increased to
support systems that may have more than two controllers.

Increase the size of the struct chip_select array to eight, which is the
largest number of controllers per die currently supported on AMD
systems.

Fix number of DIMMs and Chip Select bases/masks on Family17h, because
AMD Family 17h systems support 2 DIMMs, 4 CS bases, and 2 CS masks per
channel.

Also, carve out the Family 17h+ reading of the bases/masks into a
separate function. This effectively reverts the original bases/masks
reading code to before Family 17h support was added.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190821235938.118710-2-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 123 +++++++++++++++++++++-----------------
 drivers/edac/amd64_edac.h |   5 +-
 2 files changed, 71 insertions(+), 57 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 873437be86d9c..dd60cf5a3d969 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -810,7 +810,7 @@ static void debug_display_dimm_sizes_df(struct amd64_pvt *pvt, u8 ctrl)
 
 	edac_printk(KERN_DEBUG, EDAC_MC, "UMC%d chip selects:\n", ctrl);
 
-	for (dimm = 0; dimm < 4; dimm++) {
+	for (dimm = 0; dimm < 2; dimm++) {
 		size0 = 0;
 		cs0 = dimm * 2;
 
@@ -942,89 +942,102 @@ static void prep_chip_selects(struct amd64_pvt *pvt)
 	} else if (pvt->fam == 0x15 && pvt->model == 0x30) {
 		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
 		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
+	} else if (pvt->fam >= 0x17) {
+		int umc;
+
+		for_each_umc(umc) {
+			pvt->csels[umc].b_cnt = 4;
+			pvt->csels[umc].m_cnt = 2;
+		}
+
 	} else {
 		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
 		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4;
 	}
 }
 
+static void read_umc_base_mask(struct amd64_pvt *pvt)
+{
+	u32 umc_base_reg, umc_mask_reg;
+	u32 base_reg, mask_reg;
+	u32 *base, *mask;
+	int cs, umc;
+
+	for_each_umc(umc) {
+		umc_base_reg = get_umc_base(umc) + UMCCH_BASE_ADDR;
+
+		for_each_chip_select(cs, umc, pvt) {
+			base = &pvt->csels[umc].csbases[cs];
+
+			base_reg = umc_base_reg + (cs * 4);
+
+			if (!amd_smn_read(pvt->mc_node_id, base_reg, base))
+				edac_dbg(0, "  DCSB%d[%d]=0x%08x reg: 0x%x\n",
+					 umc, cs, *base, base_reg);
+		}
+
+		umc_mask_reg = get_umc_base(umc) + UMCCH_ADDR_MASK;
+
+		for_each_chip_select_mask(cs, umc, pvt) {
+			mask = &pvt->csels[umc].csmasks[cs];
+
+			mask_reg = umc_mask_reg + (cs * 4);
+
+			if (!amd_smn_read(pvt->mc_node_id, mask_reg, mask))
+				edac_dbg(0, "  DCSM%d[%d]=0x%08x reg: 0x%x\n",
+					 umc, cs, *mask, mask_reg);
+		}
+	}
+}
+
 /*
  * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask registers
  */
 static void read_dct_base_mask(struct amd64_pvt *pvt)
 {
-	int base_reg0, base_reg1, mask_reg0, mask_reg1, cs;
+	int cs;
 
 	prep_chip_selects(pvt);
 
-	if (pvt->umc) {
-		base_reg0 = get_umc_base(0) + UMCCH_BASE_ADDR;
-		base_reg1 = get_umc_base(1) + UMCCH_BASE_ADDR;
-		mask_reg0 = get_umc_base(0) + UMCCH_ADDR_MASK;
-		mask_reg1 = get_umc_base(1) + UMCCH_ADDR_MASK;
-	} else {
-		base_reg0 = DCSB0;
-		base_reg1 = DCSB1;
-		mask_reg0 = DCSM0;
-		mask_reg1 = DCSM1;
-	}
+	if (pvt->umc)
+		return read_umc_base_mask(pvt);
 
 	for_each_chip_select(cs, 0, pvt) {
-		int reg0   = base_reg0 + (cs * 4);
-		int reg1   = base_reg1 + (cs * 4);
+		int reg0   = DCSB0 + (cs * 4);
+		int reg1   = DCSB1 + (cs * 4);
 		u32 *base0 = &pvt->csels[0].csbases[cs];
 		u32 *base1 = &pvt->csels[1].csbases[cs];
 
-		if (pvt->umc) {
-			if (!amd_smn_read(pvt->mc_node_id, reg0, base0))
-				edac_dbg(0, "  DCSB0[%d]=0x%08x reg: 0x%x\n",
-					 cs, *base0, reg0);
-
-			if (!amd_smn_read(pvt->mc_node_id, reg1, base1))
-				edac_dbg(0, "  DCSB1[%d]=0x%08x reg: 0x%x\n",
-					 cs, *base1, reg1);
-		} else {
-			if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, base0))
-				edac_dbg(0, "  DCSB0[%d]=0x%08x reg: F2x%x\n",
-					 cs, *base0, reg0);
+		if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, base0))
+			edac_dbg(0, "  DCSB0[%d]=0x%08x reg: F2x%x\n",
+				 cs, *base0, reg0);
 
-			if (pvt->fam == 0xf)
-				continue;
+		if (pvt->fam == 0xf)
+			continue;
 
-			if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, base1))
-				edac_dbg(0, "  DCSB1[%d]=0x%08x reg: F2x%x\n",
-					 cs, *base1, (pvt->fam == 0x10) ? reg1
-								: reg0);
-		}
+		if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, base1))
+			edac_dbg(0, "  DCSB1[%d]=0x%08x reg: F2x%x\n",
+				 cs, *base1, (pvt->fam == 0x10) ? reg1
+							: reg0);
 	}
 
 	for_each_chip_select_mask(cs, 0, pvt) {
-		int reg0   = mask_reg0 + (cs * 4);
-		int reg1   = mask_reg1 + (cs * 4);
+		int reg0   = DCSM0 + (cs * 4);
+		int reg1   = DCSM1 + (cs * 4);
 		u32 *mask0 = &pvt->csels[0].csmasks[cs];
 		u32 *mask1 = &pvt->csels[1].csmasks[cs];
 
-		if (pvt->umc) {
-			if (!amd_smn_read(pvt->mc_node_id, reg0, mask0))
-				edac_dbg(0, "    DCSM0[%d]=0x%08x reg: 0x%x\n",
-					 cs, *mask0, reg0);
-
-			if (!amd_smn_read(pvt->mc_node_id, reg1, mask1))
-				edac_dbg(0, "    DCSM1[%d]=0x%08x reg: 0x%x\n",
-					 cs, *mask1, reg1);
-		} else {
-			if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, mask0))
-				edac_dbg(0, "    DCSM0[%d]=0x%08x reg: F2x%x\n",
-					 cs, *mask0, reg0);
+		if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, mask0))
+			edac_dbg(0, "    DCSM0[%d]=0x%08x reg: F2x%x\n",
+				 cs, *mask0, reg0);
 
-			if (pvt->fam == 0xf)
-				continue;
+		if (pvt->fam == 0xf)
+			continue;
 
-			if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, mask1))
-				edac_dbg(0, "    DCSM1[%d]=0x%08x reg: F2x%x\n",
-					 cs, *mask1, (pvt->fam == 0x10) ? reg1
-								: reg0);
-		}
+		if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, mask1))
+			edac_dbg(0, "    DCSM1[%d]=0x%08x reg: F2x%x\n",
+				 cs, *mask1, (pvt->fam == 0x10) ? reg1
+							: reg0);
 	}
 }
 
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 8f66472f7adc2..4dce6a2ac75f9 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -96,6 +96,7 @@
 /* Hardware limit on ChipSelect rows per MC and processors per system */
 #define NUM_CHIPSELECTS			8
 #define DRAM_RANGES			8
+#define NUM_CONTROLLERS			8
 
 #define ON true
 #define OFF false
@@ -351,8 +352,8 @@ struct amd64_pvt {
 	u32 dbam0;		/* DRAM Base Address Mapping reg for DCT0 */
 	u32 dbam1;		/* DRAM Base Address Mapping reg for DCT1 */
 
-	/* one for each DCT */
-	struct chip_select csels[2];
+	/* one for each DCT/UMC */
+	struct chip_select csels[NUM_CONTROLLERS];
 
 	/* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
 	struct dram_range ranges[DRAM_RANGES];
-- 
2.20.1

[PATCH AUTOSEL 5.3 114/203] EDAC/amd64: Recognize DRAM device type ECC capability

[Sasha Levin]

From: Yazen Ghannam <yazen.ghannam@amd.com>

[ Upstream commit f8be8e5680225ac9caf07d4545f8529b7395327f ]

AMD Family 17h systems support x4 and x16 DRAM devices. However, the
device type is not checked when setting mci.edac_ctl_cap.

Set the appropriate capability flag based on the device type.

Default to x8 DRAM device when neither the x4 or x16 bits are set.

 [ bp: reverse cpk_en check to save an indentation level. ]

Fixes: 2d09d8f301f5 ("EDAC, amd64: Determine EDAC MC capabilities on Fam17h")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190821235938.118710-3-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index dd60cf5a3d969..ffe56a8fe39da 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -3150,12 +3150,15 @@ static bool ecc_enabled(struct pci_dev *F3, u16 nid)
 static inline void
 f17h_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt)
 {
-	u8 i, ecc_en = 1, cpk_en = 1;
+	u8 i, ecc_en = 1, cpk_en = 1, dev_x4 = 1, dev_x16 = 1;
 
 	for_each_umc(i) {
 		if (pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) {
 			ecc_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_ENABLED);
 			cpk_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_CHIPKILL_CAP);
+
+			dev_x4  &= !!(pvt->umc[i].dimm_cfg & BIT(6));
+			dev_x16 &= !!(pvt->umc[i].dimm_cfg & BIT(7));
 		}
 	}
 
@@ -3163,8 +3166,15 @@ f17h_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt)
 	if (ecc_en) {
 		mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
 
-		if (cpk_en)
+		if (!cpk_en)
+			return;
+
+		if (dev_x4)
 			mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED;
+		else if (dev_x16)
+			mci->edac_ctl_cap |= EDAC_FLAG_S16ECD16ED;
+		else
+			mci->edac_ctl_cap |= EDAC_FLAG_S8ECD8ED;
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.3 115/203] EDAC/amd64: Decode syndrome before translating address

[Sasha Levin]

From: Yazen Ghannam <yazen.ghannam@amd.com>

[ Upstream commit 8a2eaab7daf03b23ac902481218034ae2fae5e16 ]

AMD Family 17h systems currently require address translation in order to
report the system address of a DRAM ECC error. This is currently done
before decoding the syndrome information. The syndrome information does
not depend on the address translation, so the proper EDAC csrow/channel
reporting can function without the address. However, the syndrome
information will not be decoded if the address translation fails.

Decode the syndrome information before doing the address translation.
The syndrome information is architecturally defined in MCA_SYND and can
be considered robust. The address translation is system-specific and may
fail on newer systems without proper updates to the translation
algorithm.

Fixes: 713ad54675fd ("EDAC, amd64: Define and register UMC error decode function")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190821235938.118710-6-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ffe56a8fe39da..608fdab566b32 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2550,13 +2550,6 @@ static void decode_umc_error(int node_id, struct mce *m)
 
 	err.channel = find_umc_channel(m);
 
-	if (umc_normaddr_to_sysaddr(m->addr, pvt->mc_node_id, err.channel, &sys_addr)) {
-		err.err_code = ERR_NORM_ADDR;
-		goto log_error;
-	}
-
-	error_address_to_page_and_offset(sys_addr, &err);
-
 	if (!(m->status & MCI_STATUS_SYNDV)) {
 		err.err_code = ERR_SYND;
 		goto log_error;
@@ -2573,6 +2566,13 @@ static void decode_umc_error(int node_id, struct mce *m)
 
 	err.csrow = m->synd & 0x7;
 
+	if (umc_normaddr_to_sysaddr(m->addr, pvt->mc_node_id, err.channel, &sys_addr)) {
+		err.err_code = ERR_NORM_ADDR;
+		goto log_error;
+	}
+
+	error_address_to_page_and_offset(sys_addr, &err);
+
 log_error:
 	__log_ecc_error(mci, &err, ecc_type);
 }
-- 
2.20.1