linux-edac.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Lei Wang <leiwang_git@outlook.com>
Cc: "james.morse@arm.com" <james.morse@arm.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"mchehab@kernel.org" <mchehab@kernel.org>,
	"linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>,
	"sashal@kernel.org" <sashal@kernel.org>,
	"hangl@microsoft.com" <hangl@microsoft.com>,
	"lewan@microsoft.com" <lewan@microsoft.com>,
	"ruizhao@microsoft.com" <ruizhao@microsoft.com>,
	"scott.branden@broadcom.com" <scott.branden@broadcom.com>,
	"yuqing.shen@broadcom.com" <yuqing.shen@broadcom.com>,
	"ray.jui@broadcom.com" <ray.jui@broadcom.com>
Subject: Re: [PATCH v6 1/2] dt-bindings: edac: arm-dmc520.txt
Date: Mon, 23 Sep 2019 18:10:15 +0200	[thread overview]
Message-ID: <20190923161015.GI15355@zn.tnic> (raw)
In-Reply-To: <BY5PR04MB6599EAA659A53B2331CB812586890@BY5PR04MB6599.namprd04.prod.outlook.com>

On Thu, Sep 19, 2019 at 06:37:00PM +0000, Lei Wang wrote:
> This is the device tree bindings for new EDAC driver dmc520_edac.c.
> 
> Signed-off-by: Lei Wang <leiwang_git@outlook.com>
> Reviewed-by: James Morse <james.morse@arm.com>
> 
> ---
>     No change in v6.
> ---
>  .../devicetree/bindings/edac/arm-dmc520.txt   | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/edac/arm-dmc520.txt
> 
> diff --git a/Documentation/devicetree/bindings/edac/arm-dmc520.txt b/Documentation/devicetree/bindings/edac/arm-dmc520.txt
> new file mode 100644
> index 000000000000..71e7aa32971a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/edac/arm-dmc520.txt
> @@ -0,0 +1,26 @@
> +* ARM DMC-520 EDAC node
> +
> +Required properties:
> +- compatible		: "brcm,dmc-520", "arm,dmc-520".
> +- reg			: Address range of the DMC-520 registers.
> +- interrupts		: DMC-520 interrupt numbers. The example below specifies
> +			  two interrupt lines for dram_ecc_errc_int and
> +			  dram_ecc_errd_int.
> +- interrupt-config	: This is an array of interrupt masks. For each of the
> +			  above interrupt line, add one interrupt mask element to
> +			  it. That is, there is a 1:1 mapping from each interrupt
> +			  line to an interrupt mask. An interrupt mask can represent
> +			  multiple interrupts being enabled. Refer to interrupt_control
> +			  register in DMC-520 TRM for interrupt mapping. In the example
> +			  below, the interrupt configuration enables dram_ecc_errc_int
> +			  and dram_ecc_errd_int. And each interrupt is connected to
> +			  a separate interrupt line.
> +
> +Example:
> +
> +dmc0: dmc@200000 {
> +	compatible = "brcm,dmc-520", "arm,dmc-520";
> +	reg = <0x200000 0x80000>;
> +	interrupts = <0x0 0x349 0x4>, <0x0 0x34B 0x4>;
> +	interrupt-config = <0x4>, <0x8>;
> +};
> -- 

Still needs a DT person ACK.

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

       reply	other threads:[~2019-09-23 16:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <BY5PR04MB6599EAA659A53B2331CB812586890@BY5PR04MB6599.namprd04.prod.outlook.com>
2019-09-23 16:10 ` Borislav Petkov [this message]
     [not found]   ` <e2b9cd68-abaa-bdcd-cc56-cca285272569@outlook.com>
     [not found]     ` <41637032-a308-9a92-1b49-cb51af2580f8@outlook.com>
     [not found]       ` <BY5PR04MB65996A0CEB37001C763B248C866C0@BY5PR04MB6599.namprd04.prod.outlook.com>
2019-10-21 16:43         ` [PATCH v6 1/2] dt-bindings: edac: arm-dmc520.txt James Morse
     [not found]           ` <BY5PR04MB659953E22E846D0BF4384D0086690@BY5PR04MB6599.namprd04.prod.outlook.com>
2019-10-22 12:33             ` Borislav Petkov
2019-10-23 13:22             ` James Morse
2019-10-23 15:22               ` Rob Herring
2019-10-23 15:37 ` Rob Herring
2019-10-25 17:31   ` Lei Wang
2019-11-01 21:30     ` Lei Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190923161015.GI15355@zn.tnic \
    --to=bp@alien8.de \
    --cc=devicetree@vger.kernel.org \
    --cc=hangl@microsoft.com \
    --cc=james.morse@arm.com \
    --cc=leiwang_git@outlook.com \
    --cc=lewan@microsoft.com \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=ray.jui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=ruizhao@microsoft.com \
    --cc=sashal@kernel.org \
    --cc=scott.branden@broadcom.com \
    --cc=yuqing.shen@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).