Linux-EDAC Archive on lore.kernel.org
 help / color / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Hanna Hawa <hhhawa@amazon.com>
Cc: mchehab@kernel.org, tony.luck@intel.com, james.morse@arm.com,
	rrichter@marvell.com, robh+dt@kernel.org, frowand.list@gmail.com,
	davem@davemloft.net, gregkh@linuxfoundation.org,
	Jonathan.Cameron@huawei.com, arnd@arndb.de,
	linux-kernel@vger.kernel.org, linux-edac@vger.kernel.org,
	devicetree@vger.kernel.org, dwmw@amazon.co.uk, benh@amazon.com,
	ronenk@amazon.com, talel@amazon.com, jonnyc@amazon.com,
	hanochu@amazon.com, barakw@amazon.com
Subject: Re: [PATCH v9 1/3] edac: Add support for Amazon's Annapurna Labs L1 EDAC
Date: Tue, 25 Feb 2020 19:52:11 +0100
Message-ID: <20200225185211.GB5457@zn.tnic> (raw)
In-Reply-To: <20200129195016.956-2-hhhawa@amazon.com>

On Wed, Jan 29, 2020 at 09:50:14PM +0200, Hanna Hawa wrote:

> Adds support for Amazon's Annapurna Labs L1 EDAC driver to detect and
> report L1 errors.

You don't add support for a driver - you either add a driver or you add
support for HW...

> diff --git a/drivers/edac/al_l1_edac.c b/drivers/edac/al_l1_edac.c
> new file mode 100644
> index 000000000000..723b35b18f5b
> --- /dev/null
> +++ b/drivers/edac/al_l1_edac.c
> @@ -0,0 +1,207 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
> + */
> +
> +#include <asm/sysreg.h>
> +#include <linux/bitfield.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/smp.h>

asm/ includes go after linux/ includes.

> +
> +#include "edac_device.h"
> +#include "edac_module.h"
> +
> +#define DRV_NAME				"al_l1_edac"
> +
> +/* Same bit assignments of CPUMERRSR_EL1 in ARM CA57/CA72 */
> +#define ARM_CA57_CPUMERRSR_EL1			sys_reg(3, 1, 15, 2, 2)
> +#define ARM_CA57_CPUMERRSR_RAM_ID		GENMASK(30, 24)
> +#define  ARM_CA57_L1_I_TAG_RAM			0x00
> +#define  ARM_CA57_L1_I_DATA_RAM			0x01
> +#define  ARM_CA57_L1_D_TAG_RAM			0x08
> +#define  ARM_CA57_L1_D_DATA_RAM			0x09
> +#define  ARM_CA57_L2_TLB_RAM			0x18
> +#define ARM_CA57_CPUMERRSR_VALID		BIT(31)
> +#define ARM_CA57_CPUMERRSR_REPEAT		GENMASK_ULL(39, 32)
> +#define ARM_CA57_CPUMERRSR_OTHER		GENMASK_ULL(47, 40)
> +#define ARM_CA57_CPUMERRSR_FATAL		BIT_ULL(63)
> +
> +#define AL_L1_EDAC_MSG_MAX			256
> +
> +static void al_l1_edac_cpumerrsr_read_status(void *arg)

This is a static function so you don't really need a function prefix of
"al_l1_edac_". Use those chars to make its name more descriptive. Ditto
for the rest of the static functions in that file.

> +{
> +	struct edac_device_ctl_info *edac_dev = arg;
> +	int cpu, space, count;
> +	u32 ramid, repeat, other, fatal;
> +	u64 val;
> +	char msg[AL_L1_EDAC_MSG_MAX];
> +	char *p;
> +	spinlock_t *lock;

Please sort function local variables declaration in a reverse christmas
tree order:

	<type A> longest_variable_name;
	<type B> shorter_var_name;
	<type C> even_shorter;
	<type D> i;

> +
> +	val = read_sysreg_s(ARM_CA57_CPUMERRSR_EL1);
> +	if (!(FIELD_GET(ARM_CA57_CPUMERRSR_VALID, val)))
> +		return;
> +
> +	write_sysreg_s(0, ARM_CA57_CPUMERRSR_EL1);
> +
> +	cpu = smp_processor_id();
> +	ramid = FIELD_GET(ARM_CA57_CPUMERRSR_RAM_ID, val);
> +	repeat = FIELD_GET(ARM_CA57_CPUMERRSR_REPEAT, val);
> +	other = FIELD_GET(ARM_CA57_CPUMERRSR_OTHER, val);
> +	fatal = FIELD_GET(ARM_CA57_CPUMERRSR_FATAL, val);
> +
> +	space = sizeof(msg);
> +	p = msg;
> +	count = scnprintf(p, space, "CPU%d L1 %serror detected", cpu,
> +			  (fatal) ? "Fatal " : "");
> +	p += count;
> +	space -= count;
> +
> +	switch (ramid) {
> +	case ARM_CA57_L1_I_TAG_RAM:
> +		count = scnprintf(p, space, " RAMID='L1-I Tag RAM'");
> +		break;
> +	case ARM_CA57_L1_I_DATA_RAM:
> +		count = scnprintf(p, space, " RAMID='L1-I Data RAM'");
> +		break;
> +	case ARM_CA57_L1_D_TAG_RAM:
> +		count = scnprintf(p, space, " RAMID='L1-D Tag RAM'");
> +		break;
> +	case ARM_CA57_L1_D_DATA_RAM:
> +		count = scnprintf(p, space, " RAMID='L1-D Data RAM'");
> +		break;
> +	case ARM_CA57_L2_TLB_RAM:
> +		count = scnprintf(p, space, " RAMID='L2 TLB RAM'");
> +		break;
> +	default:
> +		count = scnprintf(p, space, " RAMID='unknown'");
> +		break;
> +	}
> +
> +	p += count;
> +	space -= count;
> +	count = scnprintf(p, space,
> +			  " repeat=%d, other=%d (CPUMERRSR_EL1=0x%llx)",
> +			  repeat, other, val);
> +
> +	lock = edac_dev->pvt_info;

That sure looks funky - why not use a proper private struct like the
rest of the drivers?

> +	spin_lock(lock);
> +	if (fatal)
> +		edac_device_handle_ue_count(edac_dev, repeat, 0, 0, msg);
> +	else
> +		edac_device_handle_ce_count(edac_dev, repeat, 0, 0, msg);
> +	spin_unlock(lock);
> +}
> +
> +static void al_l1_edac_check(struct edac_device_ctl_info *edac_dev)
> +{
> +	on_each_cpu(al_l1_edac_cpumerrsr_read_status, edac_dev, 1);
> +}
> +
> +static int al_l1_edac_probe(struct platform_device *pdev)
> +{
> +	struct edac_device_ctl_info *edac_dev;
> +	struct device *dev = &pdev->dev;
> +	spinlock_t *lock;
> +	int ret;
> +
> +	edac_dev = edac_device_alloc_ctl_info(sizeof(*lock), DRV_NAME, 1, "L",
> +					      1, 1, NULL, 0,
> +					      edac_device_alloc_index());
> +	if (!edac_dev)
> +		return -ENOMEM;
> +
> +	edac_dev->edac_check = al_l1_edac_check;
> +	edac_dev->dev = dev;
> +	edac_dev->mod_name = DRV_NAME;
> +	edac_dev->dev_name = dev_name(dev);
> +	edac_dev->ctl_name = "L1_cache";
> +	platform_set_drvdata(pdev, edac_dev);
> +	lock = edac_dev->pvt_info;
> +
> +	spin_lock_init(lock);
> +
> +	ret = edac_device_add_device(edac_dev);
> +	if (ret) {
> +		dev_err(dev, "Failed to add L1 edac device (%d)\n", ret);
> +		edac_device_free_ctl_info(edac_dev);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int al_l1_edac_remove(struct platform_device *pdev)
> +{
> +	struct edac_device_ctl_info *edac_dev = platform_get_drvdata(pdev);
> +
> +	edac_device_del_device(edac_dev->dev);
> +	edac_device_free_ctl_info(edac_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id al_l1_edac_of_match[] = {
> +	/*
> +	 * "al,alpine-v2", and "amazon,al-alpine-v3" are machine compatible
> +	 * strings which have Cortex-A57/A72 configured with this support,
> +	 * and access to CPUMERRSR_EL1 register is enabled in firmware.
> +	 */
> +	{ .compatible = "al,alpine-v2" },

Err, checkpatch says:

WARNING: DT compatible string "al,alpine-v2" appears un-documented -- check ./Documentation/devicetree/bindings/
#236: FILE: drivers/edac/al_l1_edac.c:151:
+       { .compatible = "al,alpine-v2" },


Do you need a devicetree addition? I usually get such with the ARM EDAC
drivers...

> +	{ .compatible = "amazon,al-alpine-v3" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, al_l1_edac_of_match);
> +
> +static struct platform_driver al_l1_edac_driver = {
> +	.probe = al_l1_edac_probe,
> +	.remove = al_l1_edac_remove,
> +	.driver = {
> +		.name = DRV_NAME,
> +	},
> +};
> +
> +static struct platform_device *edac_l1_device;

Please move to the top of the file.

> +
> +static int __init al_l1_init(void)
> +{
> +	struct device_node *root;
> +	int ret;
> +
> +	root = of_find_node_by_path("/");
> +	if (!root) {
> +		pr_debug("Can't find root node!\n");
> +		return 0;
> +	}
> +
> +	if (!of_match_node(al_l1_edac_of_match, root))
> +		return 0;
> +
> +	ret = platform_driver_register(&al_l1_edac_driver);
> +	if (ret) {
> +		pr_err("Failed to register %s (%d)\n", DRV_NAME, ret);
> +		return ret;
> +	}
> +
> +	edac_l1_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
> +	if (IS_ERR(edac_l1_device)) {
> +		pr_err("Failed to register EDAC AL L1 platform device\n");

		platform_driver_unregister() ?

> +		return PTR_ERR(edac_l1_device);
> +	}
> +
> +	return 0;
> +}
> +
> +static void __exit al_l1_exit(void)
> +{
> +	platform_device_unregister(edac_l1_device);
> +	platform_driver_unregister(&al_l1_edac_driver);
> +}
> +
> +late_initcall(al_l1_init);

Why not module_init() ?

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-29 19:50 [PATCH v9 0/3] Add support for Amazon's Annapurna Labs EDAC for L1/L2 Hanna Hawa
2020-01-29 19:50 ` [PATCH v9 1/3] edac: Add support for Amazon's Annapurna Labs L1 EDAC Hanna Hawa
2020-02-25 18:52   ` Borislav Petkov [this message]
2020-03-04  9:02     ` Hawa, Hanna
2020-01-29 19:50 ` [PATCH v9 2/3] of: EXPORT_SYMBOL_GPL of_find_next_cache_node Hanna Hawa
2020-01-29 19:50 ` [PATCH v9 3/3] edac: Add support for Amazon's Annapurna Labs L2 EDAC Hanna Hawa
2020-03-10 13:47   ` Robert Richter
2020-05-05  8:30     ` Hawa, Hanna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225185211.GB5457@zn.tnic \
    --to=bp@alien8.de \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=arnd@arndb.de \
    --cc=barakw@amazon.com \
    --cc=benh@amazon.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw@amazon.co.uk \
    --cc=frowand.list@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hanochu@amazon.com \
    --cc=hhhawa@amazon.com \
    --cc=james.morse@arm.com \
    --cc=jonnyc@amazon.com \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ronenk@amazon.com \
    --cc=rrichter@marvell.com \
    --cc=talel@amazon.com \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-EDAC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-edac/0 linux-edac/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-edac linux-edac/ https://lore.kernel.org/linux-edac \
		linux-edac@vger.kernel.org
	public-inbox-index linux-edac

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-edac


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git