Linux-EDAC Archive on lore.kernel.org
 help / color / Atom feed
From: Yazen Ghannam <Yazen.Ghannam@amd.com>
To: linux-edac@vger.kernel.org
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>,
	linux-kernel@vger.kernel.org, tony.luck@intel.com,
	x86@kernel.org, Smita.KoralahalliChannabasappa@amd.com
Subject: [PATCH v2 4/8] x86/MCE/AMD: Use defines for register addresses in translation code
Date: Thu,  3 Sep 2020 20:01:40 +0000
Message-ID: <20200903200144.310991-5-Yazen.Ghannam@amd.com> (raw)
In-Reply-To: <20200903200144.310991-1-Yazen.Ghannam@amd.com>

From: Yazen Ghannam <yazen.ghannam@amd.com>

Replace raw register offset values in the AMD address translation code
with named definitions.

Also, drop comments that only note the register names.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20200814191449.183998-3-Yazen.Ghannam@amd.com

v1 -> v2:
* New patch based on comments for v1 Patch 2.

 arch/x86/kernel/cpu/mce/amd.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index be96f77004ad..1e0510fd5afc 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -675,6 +675,14 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 		deferred_error_interrupt_enable(c);
 }
 
+#define DF_F0_FABRICINSTINFO3	0x50
+#define DF_F0_MMIOHOLE		0x104
+#define DF_F0_DRAMBASEADDR	0x110
+#define DF_F0_DRAMLIMITADDR	0x114
+#define DF_F0_DRAMOFFSET	0x1B4
+
+#define DF_F1_SYSFABRICID	0x208
+
 int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
 {
 	u64 dram_base_addr, dram_limit_addr, dram_hole_base;
@@ -691,22 +699,21 @@ int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
 	u8 cs_mask, cs_id = 0;
 	bool hash_enabled = false;
 
-	/* Read D18F0x1B4 (DramOffset), check if base 1 is used. */
-	if (amd_df_indirect_read(nid, 0, 0x1B4, umc, &tmp))
+	if (amd_df_indirect_read(nid, 0, DF_F0_DRAMOFFSET, umc, &tmp))
 		goto out_err;
 
 	/* Remove HiAddrOffset from normalized address, if enabled: */
 	if (tmp & BIT(0)) {
 		u64 hi_addr_offset = (tmp & GENMASK_ULL(31, 20)) << 8;
 
+		/* Check if base 1 is used. */
 		if (norm_addr >= hi_addr_offset) {
 			ret_addr -= hi_addr_offset;
 			base = 1;
 		}
 	}
 
-	/* Read D18F0x110 (DramBaseAddress). */
-	if (amd_df_indirect_read(nid, 0, 0x110 + (8 * base), umc, &tmp))
+	if (amd_df_indirect_read(nid, 0, DF_F0_DRAMBASEADDR + (8 * base), umc, &tmp))
 		goto out_err;
 
 	/* Check if address range is valid. */
@@ -728,8 +735,7 @@ int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
 		goto out_err;
 	}
 
-	/* Read D18F0x114 (DramLimitAddress). */
-	if (amd_df_indirect_read(nid, 0, 0x114 + (8 * base), umc, &tmp))
+	if (amd_df_indirect_read(nid, 0, DF_F0_DRAMLIMITADDR + (8 * base), umc, &tmp))
 		goto out_err;
 
 	intlv_num_sockets = (tmp >> 8) & 0x1;
@@ -780,12 +786,11 @@ int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
 		u8 die_id_bit, sock_id_bit, cs_fabric_id;
 
 		/*
-		 * Read FabricBlockInstanceInformation3_CS[BlockFabricID].
 		 * This is the fabric id for this coherent slave. Use
 		 * umc/channel# as instance id of the coherent slave
 		 * for FICAA.
 		 */
-		if (amd_df_indirect_read(nid, 0, 0x50, umc, &tmp))
+		if (amd_df_indirect_read(nid, 0, DF_F0_FABRICINSTINFO3, umc, &tmp))
 			goto out_err;
 
 		cs_fabric_id = (tmp >> 8) & 0xFF;
@@ -800,9 +805,8 @@ int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
 
 		sock_id_bit = die_id_bit;
 
-		/* Read D18F1x208 (SystemFabricIdMask). */
 		if (intlv_num_dies || intlv_num_sockets)
-			if (amd_df_indirect_read(nid, 1, 0x208, umc, &tmp))
+			if (amd_df_indirect_read(nid, 1, DF_F1_SYSFABRICID, umc, &tmp))
 				goto out_err;
 
 		/* If interleaved over more than 1 die. */
@@ -841,7 +845,7 @@ int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
 
 	/* If legacy MMIO hole enabled */
 	if (lgcy_mmio_hole_en) {
-		if (amd_df_indirect_read(nid, 0, 0x104, umc, &tmp))
+		if (amd_df_indirect_read(nid, 0, DF_F0_MMIOHOLE, umc, &tmp))
 			goto out_err;
 
 		dram_hole_base = tmp & GENMASK(31, 24);
-- 
2.25.1


  parent reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-03 20:01 [PATCH v2 0/8] AMD MCA Address Translation Updates Yazen Ghannam
2020-09-03 20:01 ` [PATCH v2 1/8] x86/CPU/AMD: Save NodeId on AMD-based systems Yazen Ghannam
2020-09-09 18:06   ` Borislav Petkov
2020-09-09 20:17     ` Yazen Ghannam
2020-09-10 10:14       ` Borislav Petkov
2020-09-14 19:20         ` Yazen Ghannam
2020-09-15  8:35           ` Borislav Petkov
2020-09-16 19:51             ` Yazen Ghannam
2020-09-17 10:37               ` Borislav Petkov
2020-09-17 16:20                 ` Yazen Ghannam
2020-09-17 16:40                   ` Borislav Petkov
2020-09-17 19:44                     ` Yazen Ghannam
2020-09-17 20:10                       ` Borislav Petkov
2020-09-03 20:01 ` [PATCH v2 2/8] x86/CPU/AMD: Remove amd_get_nb_id() Yazen Ghannam
2020-09-03 20:01 ` [PATCH v2 3/8] EDAC/mce_amd: Use struct cpuinfo_x86.node_id for NodeId Yazen Ghannam
2020-09-03 20:01 ` Yazen Ghannam [this message]
2020-09-03 20:01 ` [PATCH v2 5/8] x86/MCE/AMD: Use macros to get bitfields in translation code Yazen Ghannam
2020-09-21 13:58   ` Borislav Petkov
2020-09-03 20:01 ` [PATCH v2 6/8] x86/MCE/AMD: Drop tmp variable " Yazen Ghannam
2020-09-23  8:05   ` Borislav Petkov
2020-09-23 16:05     ` Yazen Ghannam
2020-09-03 20:01 ` [PATCH v2 7/8] x86/MCE/AMD: Group register reads " Yazen Ghannam
2020-09-03 20:01 ` [PATCH v2 8/8] x86/MCE/AMD Support new memory interleaving modes during address translation Yazen Ghannam
2020-09-23  8:20   ` Borislav Petkov
2020-09-23 16:25     ` Yazen Ghannam
2020-09-25  7:22       ` Borislav Petkov
2020-09-25 19:51         ` Yazen Ghannam
2020-09-28  9:47           ` Borislav Petkov
2020-09-28 15:53             ` Yazen Ghannam
2020-09-28 18:14               ` Borislav Petkov
2020-09-29 13:21                 ` Yazen Ghannam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200903200144.310991-5-Yazen.Ghannam@amd.com \
    --to=yazen.ghannam@amd.com \
    --cc=Smita.KoralahalliChannabasappa@amd.com \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-EDAC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-edac/0 linux-edac/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-edac linux-edac/ https://lore.kernel.org/linux-edac \
		linux-edac@vger.kernel.org
	public-inbox-index linux-edac

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-edac


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git