Linux-EDAC Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v7 1/2] dt-bindings: edac: arm-dmc520.txt
@ 2019-11-18  2:10 Shiping Ji
  2019-11-21 20:43 ` Rob Herring
  2019-12-17 22:51 ` Yuqing Shen
  0 siblings, 2 replies; 4+ messages in thread
From: Shiping Ji @ 2019-11-18  2:10 UTC (permalink / raw)
  To: bp, james.morse, robh+dt, mark.rutland
  Cc: devicetree, linux-kernel, mchehab, linux-edac, sashal, hangl,
	lewan, ruizhao, scott.branden, yuqing.shen, ray.jui, shji,
	wangglei

This is the device tree bindings for new EDAC driver dmc520_edac.c.

Signed-off-by: Lei Wang <leiwang_git@outlook.com>
Reviewed-by: James Morse <james.morse@arm.com>

---
     Changes in v7:
         - Added arm prefix to the interrupt-config property

---
 .../devicetree/bindings/edac/arm-dmc520.txt   | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/edac/arm-dmc520.txt

diff --git a/Documentation/devicetree/bindings/edac/arm-dmc520.txt b/Documentation/devicetree/bindings/edac/arm-dmc520.txt
new file mode 100644
index 000000000000..476cf8b76f2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/arm-dmc520.txt
@@ -0,0 +1,26 @@
+* ARM DMC-520 EDAC node
+
+Required properties:
+- compatible  : "brcm,dmc-520", "arm,dmc-520".
+- reg   : Address range of the DMC-520 registers.
+- interrupts  : DMC-520 interrupt numbers. The example below specifies
+     two interrupt lines for dram_ecc_errc_int and
+     dram_ecc_errd_int.
+- arm,interrupt-config : This is an array of interrupt masks. For each of the
+     above interrupt line, add one interrupt mask element to
+     it. That is, there is a 1:1 mapping from each interrupt
+     line to an interrupt mask. An interrupt mask can represent
+     multiple interrupts being enabled. Refer to interrupt_control
+     register in DMC-520 TRM for interrupt mapping. In the example
+     below, the interrupt configuration enables dram_ecc_errc_int
+     and dram_ecc_errd_int. And each interrupt is connected to
+     a separate interrupt line.
+
+Example:
+
+dmc0: dmc@200000 {
+ compatible = "brcm,dmc-520", "arm,dmc-520";
+ reg = <0x200000 0x80000>;
+ interrupts = <0x0 0x349 0x4>, <0x0 0x34B 0x4>;
+ arm,interrupt-config = <0x4>, <0x8>;
+};
-- 
2.17.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-18  2:10 [PATCH v7 1/2] dt-bindings: edac: arm-dmc520.txt Shiping Ji
2019-11-21 20:43 ` Rob Herring
2019-12-03 22:04   ` Shiping Ji
2019-12-17 22:51 ` Yuqing Shen

Linux-EDAC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-edac/0 linux-edac/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-edac linux-edac/ https://lore.kernel.org/linux-edac \
		linux-edac@vger.kernel.org
	public-inbox-index linux-edac

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-edac


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git