linux-efi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arvind Sankar <nivedita@alum.mit.edu>
To: Ard Biesheuvel <ardb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
	linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 11/14] efi/gop: Allow specifying mode number on command line
Date: Thu, 19 Mar 2020 22:00:25 -0400	[thread overview]
Message-ID: <20200320020028.1936003-12-nivedita@alum.mit.edu> (raw)
In-Reply-To: <20200319192855.29876-1-nivedita@alum.mit.edu>

Add the ability to choose a video mode for the selected gop by using a
command-line argument of the form
	video=efifb:mode=<n>

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
---
 Documentation/fb/efifb.rst                    |  20 +++-
 .../firmware/efi/libstub/efi-stub-helper.c    |   3 +
 drivers/firmware/efi/libstub/efistub.h        |   2 +
 drivers/firmware/efi/libstub/gop.c            | 107 ++++++++++++++++++
 4 files changed, 129 insertions(+), 3 deletions(-)

diff --git a/Documentation/fb/efifb.rst b/Documentation/fb/efifb.rst
index 04840331a00e..367fbda2f4da 100644
--- a/Documentation/fb/efifb.rst
+++ b/Documentation/fb/efifb.rst
@@ -2,8 +2,10 @@
 What is efifb?
 ==============
 
-This is a generic EFI platform driver for Intel based Apple computers.
-efifb is only for EFI booted Intel Macs.
+This is a generic EFI platform driver for systems with UEFI firmware. The
+system must be booted via the EFI stub for this to be usable. efifb supports
+both firmware with Graphics Output Protocol (GOP) displays as well as older
+systems with only Universal Graphics Adapter (UGA) displays.
 
 Supported Hardware
 ==================
@@ -12,11 +14,14 @@ Supported Hardware
 - Macbook
 - Macbook Pro 15"/17"
 - MacMini
+- ARM/ARM64/X86 systems with UEFI firmware
 
 How to use it?
 ==============
 
-efifb does not have any kind of autodetection of your machine.
+For UGA displays, efifb does not have any kind of autodetection of your
+machine.
+
 You have to add the following kernel parameters in your elilo.conf::
 
 	Macbook :
@@ -28,6 +33,9 @@ You have to add the following kernel parameters in your elilo.conf::
 	Macbook Pro 17", iMac 20" :
 		video=efifb:i20
 
+For GOP displays, efifb can autodetect the display's resolution and framebuffer
+address, so these should work out of the box without any special parameters.
+
 Accepted options:
 
 ======= ===========================================================
@@ -36,4 +44,10 @@ nowc	Don't map the framebuffer write combined. This can be used
 	when large amounts of console data are written.
 ======= ===========================================================
 
+Options for GOP displays:
+
+mode=n
+        The EFI stub will set the mode of the display to mode number n if
+        possible.
+
 Edgar Hucek <gimli@dark-green.com>
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index 9f34c7242939..c6092b6038cf 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -105,6 +105,9 @@ efi_status_t efi_parse_options(char const *cmdline)
 				efi_disable_pci_dma = true;
 			if (parse_option_str(val, "no_disable_early_pci_dma"))
 				efi_disable_pci_dma = false;
+		} else if (!strcmp(param, "video") &&
+			   val && strstarts(val, "efifb:")) {
+			efi_parse_option_graphics(val + strlen("efifb:"));
 		}
 	}
 	efi_bs_call(free_pool, buf);
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index c400fd88fe38..4844c3bd40df 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -650,6 +650,8 @@ efi_status_t efi_relocate_kernel(unsigned long *image_addr,
 
 efi_status_t efi_parse_options(char const *cmdline);
 
+void efi_parse_option_graphics(char *option);
+
 efi_status_t efi_setup_gop(struct screen_info *si, efi_guid_t *proto,
 			   unsigned long size);
 
diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
index 2d91699e3061..a32b784b4577 100644
--- a/drivers/firmware/efi/libstub/gop.c
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -8,11 +8,115 @@
 #include <linux/bitops.h>
 #include <linux/efi.h>
 #include <linux/screen_info.h>
+#include <linux/string.h>
 #include <asm/efi.h>
 #include <asm/setup.h>
 
 #include "efistub.h"
 
+enum efi_cmdline_option {
+	EFI_CMDLINE_NONE,
+	EFI_CMDLINE_MODE_NUM,
+};
+
+static struct {
+	enum efi_cmdline_option option;
+	u32 mode;
+} cmdline __efistub_global = { .option = EFI_CMDLINE_NONE };
+
+static bool parse_modenum(char *option, char **next)
+{
+	u32 m;
+
+	if (!strstarts(option, "mode="))
+		return false;
+	option += strlen("mode=");
+	m = simple_strtoull(option, &option, 0);
+	if (*option && *option++ != ',')
+		return false;
+	cmdline.option = EFI_CMDLINE_MODE_NUM;
+	cmdline.mode   = m;
+
+	*next = option;
+	return true;
+}
+
+void efi_parse_option_graphics(char *option)
+{
+	while (*option) {
+		if (parse_modenum(option, &option))
+			continue;
+
+		while (*option && *option++ != ',')
+			;
+	}
+}
+
+static u32 choose_mode_modenum(efi_graphics_output_protocol_t *gop)
+{
+	efi_status_t status;
+
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	unsigned long info_size;
+
+	u32 max_mode, cur_mode;
+	int pf;
+
+	mode = efi_table_attr(gop, mode);
+
+	cur_mode = efi_table_attr(mode, mode);
+	if (cmdline.mode == cur_mode)
+		return cur_mode;
+
+	max_mode = efi_table_attr(mode, max_mode);
+	if (cmdline.mode >= max_mode) {
+		efi_printk("Requested mode is invalid\n");
+		return cur_mode;
+	}
+
+	status = efi_call_proto(gop, query_mode, cmdline.mode,
+				&info_size, &info);
+	if (status != EFI_SUCCESS) {
+		efi_printk("Couldn't get mode information\n");
+		return cur_mode;
+	}
+
+	pf = info->pixel_format;
+
+	efi_bs_call(free_pool, info);
+
+	if (pf == PIXEL_BLT_ONLY || pf >= PIXEL_FORMAT_MAX) {
+		efi_printk("Invalid PixelFormat\n");
+		return cur_mode;
+	}
+
+	return cmdline.mode;
+}
+
+static void set_mode(efi_graphics_output_protocol_t *gop)
+{
+	efi_graphics_output_protocol_mode_t *mode;
+	u32 cur_mode, new_mode;
+
+	switch (cmdline.option) {
+	case EFI_CMDLINE_MODE_NUM:
+		new_mode = choose_mode_modenum(gop);
+		break;
+	default:
+		return;
+	}
+
+	mode = efi_table_attr(gop, mode);
+	cur_mode = efi_table_attr(mode, mode);
+
+	if (new_mode == cur_mode)
+		return;
+
+	if (efi_call_proto(gop, set_mode, new_mode) != EFI_SUCCESS)
+		efi_printk("Failed to set requested mode\n");
+}
+
 static void find_bits(u32 mask, u8 *pos, u8 *size)
 {
 	if (!mask) {
@@ -124,6 +228,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 	if (!gop)
 		return EFI_NOT_FOUND;
 
+	/* Change mode if requested */
+	set_mode(gop);
+
 	/* EFI framebuffer */
 	mode = efi_table_attr(gop, mode);
 	info = efi_table_attr(mode, info);
-- 
2.24.1


  parent reply	other threads:[~2020-03-20  2:00 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-19 19:28 [PATCH 00/14] efi/gop: Refactoring + mode-setting feature Arvind Sankar
2020-03-19 19:28 ` [PATCH 01/14] efi/gop: Remove redundant current_fb_base Arvind Sankar
2020-03-19 19:28 ` [PATCH 02/14] efi/gop: Move check for framebuffer before con_out Arvind Sankar
2020-03-19 19:28 ` [PATCH 03/14] efi/gop: Get mode information outside the loop Arvind Sankar
2020-03-19 19:28 ` [PATCH 04/14] efi/gop: Factor out locating the gop into a function Arvind Sankar
2020-03-19 19:28 ` [PATCH 05/14] efi/gop: Slightly re-arrange logic of find_gop Arvind Sankar
2020-03-19 19:28 ` [PATCH 06/14] efi/gop: Move variable declarations into loop block Arvind Sankar
2020-03-19 19:28 ` [PATCH 07/14] efi/gop: Use helper macros for populating lfb_base Arvind Sankar
2020-03-19 19:28 ` [PATCH 08/14] efi/gop: Use helper macros for find_bits Arvind Sankar
2020-03-19 19:28 ` [PATCH 09/14] efi/gop: Remove unreachable code from setup_pixel_info Arvind Sankar
2020-03-19 19:28 ` [PATCH 10/14] efi/gop: Add prototypes for query_mode and set_mode Arvind Sankar
2020-03-19 19:28 ` [PATCH 11/14] efi/gop: Allow specifying mode number on command line Arvind Sankar
2020-03-19 22:53   ` kbuild test robot
2020-03-20  1:09   ` kbuild test robot
2020-03-20 14:36   ` Dan Carpenter
2020-03-20 17:51     ` Arvind Sankar
2020-03-19 19:28 ` [PATCH 12/14] efi/gop: Allow specifying mode by <xres>x<yres> Arvind Sankar
2020-03-19 19:28 ` [PATCH 13/14] efi/gop: Allow specifying depth as well as resolution Arvind Sankar
2020-03-19 19:28 ` [PATCH 14/14] efi/gop: Allow automatically choosing the best mode Arvind Sankar
2020-03-19 20:02 ` [PATCH 00/14] efi/gop: Refactoring + mode-setting feature Ard Biesheuvel
2020-03-20  2:00 ` [PATCH v2 " Arvind Sankar
2020-03-25 16:41   ` Ard Biesheuvel
2020-03-25 22:10     ` Arvind Sankar
2020-03-25 23:36       ` Ard Biesheuvel
2020-03-26 10:41         ` Ard Biesheuvel
2020-03-28 16:06           ` efi/gop: skip cur_mode in choose_mode_auto Arvind Sankar
2020-03-28 16:06             ` [PATCH v3] efi/gop: Allow automatically choosing the best mode Arvind Sankar
2020-03-29  7:47             ` efi/gop: skip cur_mode in choose_mode_auto Ard Biesheuvel
2020-03-26 23:56         ` [PATCH v2 00/14] efi/gop: Refactoring + mode-setting feature Arvind Sankar
2020-03-28 15:43           ` Ard Biesheuvel
2020-03-25 16:50   ` Hans de Goede
2020-03-25 22:13     ` Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 01/14] efi/gop: Remove redundant current_fb_base Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 02/14] efi/gop: Move check for framebuffer before con_out Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 03/14] efi/gop: Get mode information outside the loop Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 04/14] efi/gop: Factor out locating the gop into a function Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 05/14] efi/gop: Slightly re-arrange logic of find_gop Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 06/14] efi/gop: Move variable declarations into loop block Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 07/14] efi/gop: Use helper macros for populating lfb_base Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 08/14] efi/gop: Use helper macros for find_bits Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 09/14] efi/gop: Remove unreachable code from setup_pixel_info Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 10/14] efi/gop: Add prototypes for query_mode and set_mode Arvind Sankar
2020-03-20  2:00 ` Arvind Sankar [this message]
2020-03-20  2:00 ` [PATCH v2 12/14] efi/gop: Allow specifying mode by <xres>x<yres> Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 13/14] efi/gop: Allow specifying depth as well as resolution Arvind Sankar
2020-03-20  2:00 ` [PATCH v2 14/14] efi/gop: Allow automatically choosing the best mode Arvind Sankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200320020028.1936003-12-nivedita@alum.mit.edu \
    --to=nivedita@alum.mit.edu \
    --cc=ardb@kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).