From: Arvind Sankar <nivedita@alum.mit.edu>
To: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org, x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 03/10] efi/x86: Use pr_efi_err for error messages
Date: Wed, 29 Apr 2020 13:41:13 -0400 [thread overview]
Message-ID: <20200429174120.1497212-5-nivedita@alum.mit.edu> (raw)
In-Reply-To: <20200429174120.1497212-1-nivedita@alum.mit.edu>
Use pr_efi_err instead of bare efi_printk for error messages.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
---
drivers/firmware/efi/libstub/x86-stub.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 677b5a1e0543..933205772d8c 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -49,7 +49,7 @@ preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size,
(void **)&rom);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to allocate memory for 'rom'\n");
+ pr_efi_err("Failed to allocate memory for 'rom'\n");
return status;
}
@@ -65,7 +65,7 @@ preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
PCI_VENDOR_ID, 1, &rom->vendor);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to read rom->vendor\n");
+ pr_efi_err("Failed to read rom->vendor\n");
goto free_struct;
}
@@ -73,7 +73,7 @@ preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
PCI_DEVICE_ID, 1, &rom->devid);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to read rom->devid\n");
+ pr_efi_err("Failed to read rom->devid\n");
goto free_struct;
}
@@ -118,7 +118,7 @@ static void setup_efi_pci(struct boot_params *params)
(void **)&pci_handle);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to allocate memory for 'pci_handle'\n");
+ pr_efi_err("Failed to allocate memory for 'pci_handle'\n");
return;
}
@@ -172,7 +172,7 @@ static void retrieve_apple_device_properties(struct boot_params *boot_params)
return;
if (efi_table_attr(p, version) != 0x10000) {
- efi_printk("Unsupported properties proto version\n");
+ pr_efi_err("Unsupported properties proto version\n");
return;
}
@@ -185,7 +185,7 @@ static void retrieve_apple_device_properties(struct boot_params *boot_params)
size + sizeof(struct setup_data),
(void **)&new);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to allocate memory for 'properties'\n");
+ pr_efi_err("Failed to allocate memory for 'properties'\n");
return;
}
@@ -372,7 +372,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
status = efi_bs_call(handle_protocol, handle, &proto, (void **)&image);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
+ pr_efi_err("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
efi_exit(handle, status);
}
@@ -382,7 +382,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
status = efi_allocate_pages(sizeof(struct boot_params),
(unsigned long *)&boot_params, ULONG_MAX);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to allocate lowmem for boot params\n");
+ pr_efi_err("Failed to allocate lowmem for boot params\n");
efi_exit(handle, status);
}
@@ -749,7 +749,7 @@ unsigned long efi_main(efi_handle_t handle,
hdr->kernel_alignment,
LOAD_PHYSICAL_ADDR);
if (status != EFI_SUCCESS) {
- efi_printk("efi_relocate_kernel() failed!\n");
+ pr_efi_err("efi_relocate_kernel() failed!\n");
goto fail;
}
/*
@@ -786,7 +786,7 @@ unsigned long efi_main(efi_handle_t handle,
efi_set_u64_split(size, &hdr->ramdisk_size,
&boot_params->ext_ramdisk_size);
} else if (status != EFI_NOT_FOUND) {
- efi_printk("efi_load_initrd_dev_path() failed!\n");
+ pr_efi_err("efi_load_initrd_dev_path() failed!\n");
goto fail;
}
}
@@ -813,13 +813,13 @@ unsigned long efi_main(efi_handle_t handle,
status = exit_boot(boot_params, handle);
if (status != EFI_SUCCESS) {
- efi_printk("exit_boot() failed!\n");
+ pr_efi_err("exit_boot() failed!\n");
goto fail;
}
return bzimage_addr;
fail:
- efi_printk("efi_main() failed!\n");
+ pr_efi_err("efi_main() failed!\n");
efi_exit(handle, status);
}
--
2.26.2
next prev parent reply other threads:[~2020-04-29 17:41 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-29 17:41 [PATCH 00/10] efi: some cleanups/refactoring for efi/next Arvind Sankar
2020-04-29 17:41 ` [PATCH 01/10] efi/x86: Use correct size for boot_params Arvind Sankar
2020-04-29 17:41 ` [PATCH 02/10] efi: Add a helper function to split 64-bit values Arvind Sankar
2020-04-29 23:51 ` kbuild test robot
2020-04-29 17:41 ` [PATCH 02/10] efi/libstub: " Arvind Sankar
2020-04-29 17:41 ` Arvind Sankar [this message]
2020-04-29 18:47 ` [PATCH 03/10] efi/x86: Use pr_efi_err for error messages Joe Perches
2020-04-29 18:49 ` Ard Biesheuvel
2020-04-29 18:57 ` Joe Perches
2020-04-29 18:59 ` Ard Biesheuvel
2020-04-29 19:47 ` Joe Perches
2020-04-29 19:48 ` Ard Biesheuvel
2020-04-29 21:43 ` Arvind Sankar
2020-04-29 21:45 ` Ard Biesheuvel
2020-04-29 21:51 ` Arvind Sankar
2020-04-29 21:53 ` Joe Perches
2020-04-29 21:55 ` Ard Biesheuvel
2020-04-29 22:20 ` Arvind Sankar
2020-04-30 15:14 ` Ard Biesheuvel
2020-04-29 17:41 ` [PATCH 04/10] efi/gop: " Arvind Sankar
2020-04-29 17:41 ` [PATCH 05/10] efi/tpm: " Arvind Sankar
2020-04-29 17:41 ` [PATCH 06/10] efi/x86: Move command-line initrd loading to efi_main Arvind Sankar
2020-04-29 17:41 ` [PATCH 07/10] efi/libstub: Unify initrd loading across architectures Arvind Sankar
2020-04-29 17:41 ` [PATCH 08/10] efi/x86: Drop soft_limit for x86 initrd loading Arvind Sankar
2020-04-29 19:05 ` Ard Biesheuvel
2020-04-29 21:33 ` Arvind Sankar
2020-04-29 17:41 ` [PATCH 09/10] efi/x86: Support builtin command line Arvind Sankar
2020-04-29 19:07 ` Ard Biesheuvel
2020-04-29 21:39 ` Arvind Sankar
2020-04-29 21:40 ` Ard Biesheuvel
2020-04-29 21:48 ` Arvind Sankar
2020-04-29 21:51 ` Ard Biesheuvel
2020-04-29 17:41 ` [PATCH 10/10] efi/libstub: Check return value of efi_parse_options Arvind Sankar
2020-04-30 4:31 ` kbuild test robot
2020-04-30 18:28 ` [PATCH v2 00/11] efi: some cleanups/refactoring for efi/next Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 01/11] efi/x86: Use correct size for boot_params Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 02/11] efi/libstub: Add a helper function to split 64-bit values Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 03/11] efi/libstub: Move pr_efi/pr_efi_err into efi namespace Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 04/11] efi/x86: Use efi_err for error messages Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 05/11] efi/gop: " Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 06/11] efi/tpm: " Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 07/11] efi/libstub: Upgrade ignored dtb= argument message to error Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 08/11] efi/x86: Move command-line initrd loading to efi_main Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 09/11] efi/libstub: Unify initrd loading across architectures Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 10/11] efi/x86: Support builtin command line Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 11/11] efi/libstub: Check return value of efi_parse_options Arvind Sankar
2020-04-30 19:12 ` [PATCH 1/2] efi/libstub: efi_info/efi_err message neatening Joe Perches
2020-04-30 19:12 ` [PATCH 2/2] efi/libstub: Correct comment typos Joe Perches
2020-04-30 19:30 ` Ard Biesheuvel
2020-05-04 18:29 ` [trivial PATCH] efi/libstub: Reduce efi_printk object size Joe Perches
2020-05-05 7:50 ` Ard Biesheuvel
2020-05-05 8:01 ` Joe Perches
2020-04-30 19:29 ` [PATCH 1/2] efi/libstub: efi_info/efi_err message neatening Ard Biesheuvel
2020-04-30 19:38 ` Joe Perches
2020-04-30 20:40 ` Arvind Sankar
2020-04-30 20:42 ` Ard Biesheuvel
2020-05-04 8:17 ` [PATCH v2 00/11] efi: some cleanups/refactoring for efi/next Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200429174120.1497212-5-nivedita@alum.mit.edu \
--to=nivedita@alum.mit.edu \
--cc=ardb@kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).