linux-efi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lukas Wunner <lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
To: linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Matt Fleming
	<matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>
Cc: Ard Biesheuvel
	<ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Andreas Noever
	<andreas.noever-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v2 0/3] Apple device properties
Date: Mon, 17 Oct 2016 12:57:23 +0200	[thread overview]
Message-ID: <cover.1476698603.git.lukas@wunner.de> (raw)

Resending this series as requested by Matt, now that 4.9-rc1 is out
which contains all prerequisites:

On Tue, Sep 13, 2016 at 12:29:21PM +0100, Matt Fleming wrote:
> I had a quick look over these series and nothing looks too crazy, but
> I still need to do an in-depth review.
> 
> Given the patch dependencies you outlined above, could you resubmit
> this after the v4.9 merge window closes? That way it won't be
> forgotten about.


Retrieve device properties from EFI on Macs before ExitBootServices is
called and assign them to devices (patch [2/3]). The devices that
properties pertain to are encoded as EFI Device Paths, so add a parser
for these (patch [1/3]). As a first use case, amend the Thunderbolt driver
to take advantage of the Device ROM supplied by EFI (patch [3/3]).


Changes since v1:

- Previously there were two separate patches for retrieving properties
  and assigning them to devices. These are now squashed together in
  patch [2/3]. (Requested by Matt Fleming.)

- The version of the EFI properties protocol as well as the properties
  payload is now checked.

- Applied a bit of polish all over.


Link to v1:
https://lkml.org/lkml/2016/7/27/218

Browseable on GitHub:
https://github.com/l1k/linux/commits/apple_properties_v2

Thanks,

Lukas


Lukas Wunner (3):
  efi: Add device path parser
  x86/efi: Retrieve and assign Apple device properties
  thunderbolt: Use Device ROM retrieved from EFI

 Documentation/kernel-parameters.txt     |   5 +
 arch/x86/boot/compressed/eboot.c        |  63 +++++++++
 arch/x86/include/uapi/asm/bootparam.h   |   1 +
 drivers/firmware/efi/Kconfig            |  18 +++
 drivers/firmware/efi/Makefile           |   2 +
 drivers/firmware/efi/apple-properties.c | 232 ++++++++++++++++++++++++++++++++
 drivers/firmware/efi/dev-path-parser.c  | 186 +++++++++++++++++++++++++
 drivers/thunderbolt/Kconfig             |   1 +
 drivers/thunderbolt/eeprom.c            |  42 ++++++
 drivers/thunderbolt/switch.c            |   2 +-
 include/linux/efi.h                     |  38 ++++++
 11 files changed, 589 insertions(+), 1 deletion(-)
 create mode 100644 drivers/firmware/efi/apple-properties.c
 create mode 100644 drivers/firmware/efi/dev-path-parser.c

-- 
2.9.3

             reply	other threads:[~2016-10-17 10:57 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-17 10:57 Lukas Wunner [this message]
     [not found] ` <cover.1476698603.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-10-17 10:57   ` [PATCH v2 3/3] thunderbolt: Use Device ROM retrieved from EFI Lukas Wunner
2016-10-17 10:57   ` [PATCH v2 2/3] x86/efi: Retrieve and assign Apple device properties Lukas Wunner
2016-10-17 10:57   ` [PATCH v2 1/3] efi: Add device path parser Lukas Wunner
     [not found]     ` <ece9b12b1d0b86c83e8369e4123fc7bc60db1fdc.1476698603.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-10-19 11:17       ` Matt Fleming
     [not found]         ` <20161019111728.GC31476-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>
2016-10-19 11:51           ` Lukas Wunner
     [not found]             ` <20161019115119.GA2973-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-10-25 12:44               ` Matt Fleming
     [not found]                 ` <20161025124406.GD20387-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>
2016-10-25 13:51                   ` Lukas Wunner
2016-10-21 16:34           ` Peter Jones
     [not found]             ` <20161021163435.y2zlysz7dhw5ymho-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-10-22 10:16               ` Lukas Wunner
     [not found]                 ` <20161022101608.GA4447-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-10-25 14:18                   ` Peter Jones
     [not found]                     ` <20161025141819.2z244yr2ubscrm2r-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-10-27 12:31                       ` Lukas Wunner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1476698603.git.lukas@wunner.de \
    --to=lukas-jfq808j9c/izqb+pc5nmwq@public.gmane.org \
    --cc=andreas.noever-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).