From: gaoxiang25@huawei.com (Gao Xiang)
Subject: [PATCH] erofs: Use common kernel logging style
Date: Mon, 19 Aug 2019 14:08:58 +0800 [thread overview]
Message-ID: <20190819060858.GC30459@138> (raw)
In-Reply-To: <31cb3e54fe532630b45bb74ba4fc688eb86eab1f.camel@perches.com>
Hi Joe,
On Sun, Aug 18, 2019@10:47:17PM -0700, Joe Perches wrote:
> On Mon, 2019-08-19@13:52 +0800, Gao Xiang wrote:
> > Hi Joe,
>
> Hello.
>
> > On Sun, Aug 18, 2019@10:28:41PM -0700, Joe Perches wrote:
> > > Rename errln, infoln, and debugln to the typical pr_<level> uses
> > > to the typical kernel styles of pr_<level>
> >
> > How about using erofs_err / ... to instead that?
>
> <shrug> I've no opinion.
> It seems most fs/*/* filesystems actually do use pr_<level>
> sed works well if you want that.
Sorry, I mainly refer to ext4, ext2, xfs and f2fs...
I didn't notice the other filesystems, you are right.
Okay, I have no opinion as well (maybe we could turn back later to
introduce sb parameter...)
>
> > - I can hardly see directly use pr_<level> for those filesystems in fs/...
>
> just fyi:
>
> There was this one existing pr_<level> use in erofs
That is just because the following piece of code was taken from fs/mpage.c,
I tend to replace it with iomap in the later version after tail-end packing inline is done.
Thanks,
Gao Xiang
>
> drivers/staging/erofs/data.c:366: pr_err("%s, readahead error at page %lu of nid %llu\n",
> drivers/staging/erofs/data.c-367- __func__, page->index,
> drivers/staging/erofs/data.c-368- EROFS_V(mapping->host)->nid);
>
>
>
prev parent reply other threads:[~2019-08-19 6:08 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-17 8:23 [PATCH] erofs: move erofs out of staging Gao Xiang
2019-08-17 21:19 ` Richard Weinberger
2019-08-17 22:07 ` Gao Xiang
2019-08-17 23:25 ` Richard Weinberger
2019-08-17 23:38 ` Gao Xiang
2019-08-18 0:04 ` Gao Xiang
2019-08-18 0:52 ` Gao Xiang
2019-08-18 8:16 ` Richard Weinberger
2019-08-18 8:45 ` Gao Xiang
2019-08-18 9:03 ` Richard Weinberger
2019-08-18 9:09 ` Greg Kroah-Hartman
2019-08-18 9:21 ` Richard Weinberger
2019-08-18 10:12 ` Chao Yu
2019-08-18 15:11 ` Theodore Y. Ts'o
2019-08-18 15:58 ` Christoph Hellwig
2019-08-18 16:16 ` Eric Biggers
2019-08-18 16:22 ` Christoph Hellwig
2019-08-18 16:33 ` Gao Xiang
2019-08-18 17:29 ` Eric Biggers
2019-08-18 17:47 ` Christoph Hellwig
2019-08-18 18:16 ` Gao Xiang
2019-08-18 20:14 ` Gao Xiang
2019-08-19 7:35 ` Richard Weinberger
2019-08-19 8:02 ` Gao Xiang
2019-08-19 10:34 ` [PATCH 0/6] staging: erofs: first stage of corrupted compressed images Gao Xiang
2019-08-19 10:34 ` [PATCH 1/6] staging: erofs: some compressed cluster should be submitted for corrupted images Gao Xiang
2019-08-19 14:36 ` Chao Yu
2019-08-19 14:36 ` Chao Yu
2019-08-19 14:39 ` Chao Yu
2019-08-19 14:39 ` Chao Yu
2019-08-19 10:34 ` [PATCH 2/6] staging: erofs: cannot set EROFS_V_Z_INITED_BIT if fill_inode_lazy fails Gao Xiang
2019-08-19 14:43 ` Chao Yu
2019-08-19 14:43 ` Chao Yu
2019-08-19 10:34 ` [PATCH 3/6] staging: erofs: add two missing erofs_workgroup_put for corrupted images Gao Xiang
2019-08-19 14:40 ` Chao Yu
2019-08-19 14:40 ` Chao Yu
2019-08-19 10:34 ` [PATCH 4/6] staging: erofs: avoid loop in submit chains Gao Xiang
2019-08-19 14:50 ` Chao Yu
2019-08-19 14:50 ` Chao Yu
2019-08-19 10:34 ` [PATCH 5/6] staging: erofs: detect potential multiref due to corrupted images Gao Xiang
2019-08-19 14:57 ` Chao Yu
2019-08-19 14:57 ` Chao Yu
2019-08-21 2:19 ` Greg Kroah-Hartman
2019-08-21 14:01 ` [PATCH v2 " Gao Xiang
2019-08-21 14:24 ` Chao Yu
2019-08-19 10:34 ` [PATCH 6/6] staging: erofs: avoid endless loop of invalid lookback distance 0 Gao Xiang
2019-08-19 14:58 ` Chao Yu
2019-08-19 14:58 ` Chao Yu
2019-08-19 16:09 ` [PATCH] erofs: move erofs out of staging Darrick J. Wong
2019-08-19 20:30 ` Gao Xiang via Linux-erofs
2019-08-20 0:55 ` Qu Wenruo
2019-08-20 1:55 ` Gao Xiang
2019-08-20 2:24 ` Chao Yu
2019-08-20 2:38 ` Qu Wenruo
2019-08-20 7:15 ` Chao Yu
2019-08-20 8:46 ` Qu Wenruo
2019-08-21 2:12 ` Chao Yu
2019-08-20 15:56 ` Theodore Y. Ts'o
2019-08-20 16:35 ` Gao Xiang via Linux-erofs
2019-08-21 0:51 ` Theodore Y. Ts'o
2019-08-21 1:34 ` Chao Yu
2019-08-21 1:48 ` Darrick J. Wong
2019-08-21 1:57 ` Chao Yu
2019-08-20 3:33 ` Miao Xie
2019-08-20 3:46 ` Gao Xiang
2019-08-20 6:04 ` Qu Wenruo
2019-08-20 6:22 ` Gao Xiang
2019-08-19 7:37 ` Richard Weinberger
2019-08-18 17:43 ` Theodore Y. Ts'o
2019-08-18 16:03 ` Gao Xiang
2019-08-18 17:06 ` Richard Weinberger
2019-08-18 17:46 ` Theodore Y. Ts'o
2019-08-18 18:00 ` Richard Weinberger
2019-08-18 18:31 ` Gao Xiang
2019-08-18 9:28 ` Gao Xiang
2019-08-19 5:28 ` [PATCH] erofs: Use common kernel logging style Joe Perches
2019-08-19 5:52 ` Gao Xiang
2019-08-19 5:47 ` Joe Perches
2019-08-19 6:08 ` Gao Xiang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190819060858.GC30459@138 \
--to=gaoxiang25@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).