linux-erofs.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <djwong@kernel.org>
To: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>,
	LKML <linux-kernel@vger.kernel.org>,
	Matthew Wilcox <willy@infradead.org>,
	Joseph Qi <joseph.qi@linux.alibaba.com>,
	linux-fsdevel@vger.kernel.org, linux-erofs@lists.ozlabs.org,
	Christoph Hellwig <hch@lst.de>
Date: Tue, 27 Jul 2021 08:10:51 -0700	[thread overview]
raw)
In-Reply-To: <20210727025956.80684-1-hsiangkao@linux.alibaba.com>

I'll change the subject to:

iomap: support reading inline data from non-zero pos

The existing inline data support only works for cases where the entire
file is stored as inline data.  For larger files, EROFS stores the
initial blocks separately and the remainder of the file ("file tail")
adjacent to the inode.  Generalise inline data to allow reading the
inline file tail.  Tails may not cross a page boundary in memory.

We currently have no filesystems that support tails and writing,
so that case is currently disabled (see iomap_write_begin_inline).

If that's ok with everyone,
Reviewed-by: Darrick J. Wong <djwong@kernel.org>

--D


On Tue, Jul 27, 2021 at 10:59:56AM +0800, Gao Xiang wrote:
> The existing inline data support only works for cases where the entire
> file is stored as inline data.  For larger files, EROFS stores the
> initial blocks separately and then can pack a small tail adjacent to the
> inode.  Generalise inline data to allow for tail packing.  Tails may not
> cross a page boundary in memory.
> 
> We currently have no filesystems that support tail packing and writing,
> so that case is currently disabled (see iomap_write_begin_inline).
> 
> Cc: Darrick J. Wong <djwong@kernel.org>
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
> ---
> v8: https://lore.kernel.org/r/20210726145734.214295-1-hsiangkao@linux.alibaba.com
> changes since v8:
>  - update the subject to 'iomap: Support file tail packing' as there
>    are clearly a number of ways to make the inline data support more
>    flexible (Matthew);
> 
>  - add one extra safety check (Darrick):
> 	if (WARN_ON_ONCE(size > iomap->length))
> 		return -EIO;
> 
>  fs/iomap/buffered-io.c | 42 ++++++++++++++++++++++++++++++------------
>  fs/iomap/direct-io.c   | 10 ++++++----
>  include/linux/iomap.h  | 18 ++++++++++++++++++
>  3 files changed, 54 insertions(+), 16 deletions(-)
> 
> diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
> index 87ccb3438bec..f429b9d87dbe 100644
> --- a/fs/iomap/buffered-io.c
> +++ b/fs/iomap/buffered-io.c
> @@ -205,25 +205,32 @@ struct iomap_readpage_ctx {
>  	struct readahead_control *rac;
>  };
>  
> -static void
> -iomap_read_inline_data(struct inode *inode, struct page *page,
> +static int iomap_read_inline_data(struct inode *inode, struct page *page,
>  		struct iomap *iomap)
>  {
> -	size_t size = i_size_read(inode);
> +	size_t size = i_size_read(inode) - iomap->offset;
>  	void *addr;
>  
>  	if (PageUptodate(page))
> -		return;
> +		return 0;
>  
> -	BUG_ON(page_has_private(page));
> -	BUG_ON(page->index);
> -	BUG_ON(size > PAGE_SIZE - offset_in_page(iomap->inline_data));
> +	/* inline data must start page aligned in the file */
> +	if (WARN_ON_ONCE(offset_in_page(iomap->offset)))
> +		return -EIO;
> +	if (WARN_ON_ONCE(size > PAGE_SIZE -
> +			 offset_in_page(iomap->inline_data)))
> +		return -EIO;
> +	if (WARN_ON_ONCE(size > iomap->length))
> +		return -EIO;
> +	if (WARN_ON_ONCE(page_has_private(page)))
> +		return -EIO;
>  
>  	addr = kmap_atomic(page);
>  	memcpy(addr, iomap->inline_data, size);
>  	memset(addr + size, 0, PAGE_SIZE - size);
>  	kunmap_atomic(addr);
>  	SetPageUptodate(page);
> +	return 0;
>  }
>  
>  static inline bool iomap_block_needs_zeroing(struct inode *inode,
> @@ -247,8 +254,10 @@ iomap_readpage_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
>  	sector_t sector;
>  
>  	if (iomap->type == IOMAP_INLINE) {
> -		WARN_ON_ONCE(pos);
> -		iomap_read_inline_data(inode, page, iomap);
> +		int ret = iomap_read_inline_data(inode, page, iomap);
> +
> +		if (ret)
> +			return ret;
>  		return PAGE_SIZE;
>  	}
>  
> @@ -589,6 +598,15 @@ __iomap_write_begin(struct inode *inode, loff_t pos, unsigned len, int flags,
>  	return 0;
>  }
>  
> +static int iomap_write_begin_inline(struct inode *inode,
> +		struct page *page, struct iomap *srcmap)
> +{
> +	/* needs more work for the tailpacking case, disable for now */
> +	if (WARN_ON_ONCE(srcmap->offset != 0))
> +		return -EIO;
> +	return iomap_read_inline_data(inode, page, srcmap);
> +}
> +
>  static int
>  iomap_write_begin(struct inode *inode, loff_t pos, unsigned len, unsigned flags,
>  		struct page **pagep, struct iomap *iomap, struct iomap *srcmap)
> @@ -618,7 +636,7 @@ iomap_write_begin(struct inode *inode, loff_t pos, unsigned len, unsigned flags,
>  	}
>  
>  	if (srcmap->type == IOMAP_INLINE)
> -		iomap_read_inline_data(inode, page, srcmap);
> +		status = iomap_write_begin_inline(inode, page, srcmap);
>  	else if (iomap->flags & IOMAP_F_BUFFER_HEAD)
>  		status = __block_write_begin_int(page, pos, len, NULL, srcmap);
>  	else
> @@ -671,11 +689,11 @@ static size_t iomap_write_end_inline(struct inode *inode, struct page *page,
>  	void *addr;
>  
>  	WARN_ON_ONCE(!PageUptodate(page));
> -	BUG_ON(pos + copied > PAGE_SIZE - offset_in_page(iomap->inline_data));
> +	BUG_ON(!iomap_inline_data_valid(iomap));
>  
>  	flush_dcache_page(page);
>  	addr = kmap_atomic(page);
> -	memcpy(iomap->inline_data + pos, addr + pos, copied);
> +	memcpy(iomap_inline_data(iomap, pos), addr + pos, copied);
>  	kunmap_atomic(addr);
>  
>  	mark_inode_dirty(inode);
> diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
> index 9398b8c31323..41ccbfc9dc82 100644
> --- a/fs/iomap/direct-io.c
> +++ b/fs/iomap/direct-io.c
> @@ -378,23 +378,25 @@ iomap_dio_inline_actor(struct inode *inode, loff_t pos, loff_t length,
>  		struct iomap_dio *dio, struct iomap *iomap)
>  {
>  	struct iov_iter *iter = dio->submit.iter;
> +	void *inline_data = iomap_inline_data(iomap, pos);
>  	size_t copied;
>  
> -	BUG_ON(pos + length > PAGE_SIZE - offset_in_page(iomap->inline_data));
> +	if (WARN_ON_ONCE(!iomap_inline_data_valid(iomap)))
> +		return -EIO;
>  
>  	if (dio->flags & IOMAP_DIO_WRITE) {
>  		loff_t size = inode->i_size;
>  
>  		if (pos > size)
> -			memset(iomap->inline_data + size, 0, pos - size);
> -		copied = copy_from_iter(iomap->inline_data + pos, length, iter);
> +			memset(iomap_inline_data(iomap, size), 0, pos - size);
> +		copied = copy_from_iter(inline_data, length, iter);
>  		if (copied) {
>  			if (pos + copied > size)
>  				i_size_write(inode, pos + copied);
>  			mark_inode_dirty(inode);
>  		}
>  	} else {
> -		copied = copy_to_iter(iomap->inline_data + pos, length, iter);
> +		copied = copy_to_iter(inline_data, length, iter);
>  	}
>  	dio->size += copied;
>  	return copied;
> diff --git a/include/linux/iomap.h b/include/linux/iomap.h
> index 479c1da3e221..b8ec145b2975 100644
> --- a/include/linux/iomap.h
> +++ b/include/linux/iomap.h
> @@ -97,6 +97,24 @@ iomap_sector(struct iomap *iomap, loff_t pos)
>  	return (iomap->addr + pos - iomap->offset) >> SECTOR_SHIFT;
>  }
>  
> +/*
> + * Returns the inline data pointer for logical offset @pos.
> + */
> +static inline void *iomap_inline_data(struct iomap *iomap, loff_t pos)
> +{
> +	return iomap->inline_data + pos - iomap->offset;
> +}
> +
> +/*
> + * Check if the mapping's length is within the valid range for inline data.
> + * This is used to guard against accessing data beyond the page inline_data
> + * points at.
> + */
> +static inline bool iomap_inline_data_valid(struct iomap *iomap)
> +{
> +	return iomap->length <= PAGE_SIZE - offset_in_page(iomap->inline_data);
> +}
> +
>  /*
>   * When a filesystem sets page_ops in an iomap mapping it returns, page_prepare
>   * and page_done will be called for each page written to.  This only applies to
> -- 
> 2.24.4
> 

  reply	other threads:[~2021-07-27 15:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-27  2:59 [PATCH v9] iomap: Support file tail packing Gao Xiang
2021-07-27 15:10 ` Darrick J. Wong [this message]
2021-07-27 15:23   ` Andreas Grünbacher
2021-07-27 15:30   ` Re: Gao Xiang
2021-08-01 12:03 ` [PATCH v9] iomap: Support file tail packing Andreas Gruenbacher
2021-08-02 12:15   ` Gao Xiang
2021-08-02 21:58     ` Darrick J. Wong
2021-08-03  0:17     ` [PATCH v10] iomap: support reading inline data from non-zero pos Gao Xiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210727151051.GH8572@magnolia \
    --to=djwong@kernel.org \
    --cc=agruenba@redhat.com \
    --cc=hch@lst.de \
    --cc=hsiangkao@linux.alibaba.com \
    --cc=joseph.qi@linux.alibaba.com \
    --cc=linux-erofs@lists.ozlabs.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).