Linux-ext4 Archive on lore.kernel.org
 help / color / Atom feed
From: Iurii Zaikin <yzaikin@google.com>
To: linux-kselftest@vger.kernel.org, linux-ext4@vger.kernel.org,
	skhan@linuxfoundation.org, tytso@mit.edu,
	adilger.kernel@dilger.ca, Tim.Bird@sony.com
Cc: kunit-dev@googlegroups.com, brendanhiggins@google.com,
	Iurii Zaikin <yzaikin@google.com>
Subject: [PATCH linux-kselftest/test v4] ext4: add kunit test for decoding extended timestamps
Date: Fri, 11 Oct 2019 19:37:57 -0700
Message-ID: <20191012023757.172770-1-yzaikin@google.com> (raw)

KUnit tests for decoding extended 64 bit timestamps
that verify the seconds part of [a/c/m]
timestamps in ext4 inode structs are decoded correctly.
KUnit tests, which run on boot and output
the results to the debug log in TAP format (http://testanything.org/).
are only useful for kernel devs running KUnit test harness. Not for
inclusion into a production build.
Test data is derive from the table under
Documentation/filesystems/ext4/inodes.rst Inode Timestamps.

Signed-off-by: Iurii Zaikin <yzaikin@google.com>
---
 fs/ext4/Kconfig      |  14 +++
 fs/ext4/Makefile     |   1 +
 fs/ext4/inode-test.c | 239 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 254 insertions(+)
 create mode 100644 fs/ext4/inode-test.c

diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
index cbb5ca830e57..f13dde8ed92b 100644
--- a/fs/ext4/Kconfig
+++ b/fs/ext4/Kconfig
@@ -106,3 +106,17 @@ config EXT4_DEBUG
 	  If you select Y here, then you will be able to turn on debugging
 	  with a command such as:
 		echo 1 > /sys/module/ext4/parameters/mballoc_debug
+
+config EXT4_KUNIT_TESTS
+	bool "KUnit tests for ext4"
+	select EXT4_FS
+	depends on KUNIT
+	help
+	  This builds the ext4 KUnit tests, which run on boot and output
+	  the results to the debug log in TAP format (http://testanything.org/).
+	  Only useful for kernel devs running KUnit test harness. Not for
+	  inclusion into a production build.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
index b17ddc229ac5..a0588fd2eea6 100644
--- a/fs/ext4/Makefile
+++ b/fs/ext4/Makefile
@@ -13,4 +13,5 @@ ext4-y	:= balloc.o bitmap.o block_validity.o dir.o ext4_jbd2.o extents.o \

 ext4-$(CONFIG_EXT4_FS_POSIX_ACL)	+= acl.o
 ext4-$(CONFIG_EXT4_FS_SECURITY)		+= xattr_security.o
+ext4-$(CONFIG_EXT4_KUNIT_TESTS)	+= inode-test.o
 ext4-$(CONFIG_FS_VERITY)		+= verity.o
diff --git a/fs/ext4/inode-test.c b/fs/ext4/inode-test.c
new file mode 100644
index 000000000000..3b3a453ff382
--- /dev/null
+++ b/fs/ext4/inode-test.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit test of ext4 inode that verify the seconds part of [a/c/m]
+ * timestamps in ext4 inode structs are decoded correctly.
+ */
+
+#include <kunit/test.h>
+#include <linux/kernel.h>
+#include <linux/time64.h>
+
+#include "ext4.h"
+
+/* binary: 00000000 00000000 00000000 00000000 */
+#define LOWER_MSB_0 0L
+/* binary: 01111111 11111111 11111111 11111111 */
+#define UPPER_MSB_0 0x7fffffffL
+/* binary: 10000000 00000000 00000000 00000000 */
+#define LOWER_MSB_1 (-0x80000000L)
+/* binary: 11111111 11111111 11111111 11111111 */
+#define UPPER_MSB_1 (-1L)
+/* binary: 00111111 11111111 11111111 11111111 */
+#define MAX_NANOSECONDS ((1L << 30) - 1)
+
+#define CASE_NAME_FORMAT "%s: msb:%x lower_bound:%x extra_bits: %x"
+
+struct timestamp_expectation {
+	const char *test_case_name;
+	struct timespec64 expected;
+	u32 extra_bits;
+	bool msb_set;
+	bool lower_bound;
+};
+
+static time64_t get_32bit_time(const struct timestamp_expectation * const test)
+{
+	if (test->msb_set) {
+		if (test->lower_bound)
+			return LOWER_MSB_1;
+
+		return UPPER_MSB_1;
+	}
+
+	if (test->lower_bound)
+		return LOWER_MSB_0;
+	return UPPER_MSB_0;
+}
+
+
+/*
+ * These tests are derived from the table under
+ * Documentation/filesystems/ext4/inodes.rst Inode Timestamps
+ */
+static void inode_test_xtimestamp_decoding(struct kunit *test)
+{
+	const struct timestamp_expectation test_data[] = {
+		{
+			.test_case_name =
+		"1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits.",
+			.msb_set = true,
+			.lower_bound = true,
+			.extra_bits = 0,
+			.expected = {.tv_sec = -0x80000000LL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+		"1969-12-31 Upper bound of 32bit < 0 timestamp, no extra bits.",
+			.msb_set = true,
+			.lower_bound = false,
+			.extra_bits = 0,
+			.expected = {.tv_sec = -1LL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+		"1970-01-01 Lower bound of 32bit >=0 timestamp, no extra bits.",
+			.msb_set = false,
+			.lower_bound = true,
+			.extra_bits = 0,
+			.expected = {0LL, 0L},
+		},
+
+		{
+			.test_case_name =
+		"2038-01-19 Upper bound of 32bit >=0 timestamp, no extra bits.",
+			.msb_set = false,
+			.lower_bound = false,
+			.extra_bits = 0,
+			.expected = {.tv_sec = 0x7fffffffLL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	"2038-01-19 Lower bound of 32bit <0 timestamp, lo extra sec bit on.",
+			.msb_set = true,
+			.lower_bound = true,
+			.extra_bits = 1,
+			.expected = {.tv_sec = 0x80000000LL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	"2106-02-07 Upper bound of 32bit <0 timestamp, lo extra sec bit on.",
+			.msb_set = true,
+			.lower_bound = false,
+			.extra_bits = 1,
+			.expected = {.tv_sec = 0xffffffffLL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	  "2106-02-07 Lower bound of 32bit >=0 timestamp, lo extra sec bit on.",
+			.msb_set = false,
+			.lower_bound = true,
+			.extra_bits = 1,
+			.expected = {.tv_sec = 0x100000000LL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	  "2174-02-25 Upper bound of 32bit >=0 timestamp, lo extra sec bit on.",
+			.msb_set = false,
+			.lower_bound = false,
+			.extra_bits = 1,
+			.expected = {.tv_sec = 0x17fffffffLL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	  "2174-02-25 Lower bound of 32bit <0 timestamp, hi extra sec bit on.",
+			.msb_set = true,
+			.lower_bound = true,
+			.extra_bits =  2,
+			.expected = {.tv_sec = 0x180000000LL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	  "2242-03-16 Upper bound of 32bit <0 timestamp, hi extra sec bit on.",
+			.msb_set = true,
+			.lower_bound = false,
+			.extra_bits = 2,
+			.expected = {.tv_sec = 0x1ffffffffLL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	"2242-03-16 Lower bound of 32bit >=0 timestamp, hi extra sec bit on.",
+			.msb_set = false,
+			.lower_bound = true,
+			.extra_bits = 2,
+			.expected = {.tv_sec = 0x200000000LL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	  "2310-04-04 Upper bound of 32bit >=0 timestamp, hi extra sec bit on.",
+			.msb_set = false,
+			.lower_bound = false,
+			.extra_bits = 2,
+			.expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+"2310-04-04 Upper bound of 32bit>=0 timestamp, hi extra sec bit 1. 1 ns bit 1.",
+			.msb_set = false,
+			.lower_bound = false,
+			.extra_bits = 6,
+			.expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 1L},
+		},
+
+		{
+			.test_case_name =
+"2378-04-22 Lower bound of 32bit>= timestamp. Extra sec bits 1. ns bits 1.",
+			.msb_set = false,
+			.lower_bound = true,
+			.extra_bits = 0xFFFFFFFF,
+			.expected = {.tv_sec = 0x300000000LL,
+				     .tv_nsec = MAX_NANOSECONDS},
+		},
+
+		{
+			.test_case_name =
+	 "2378-04-22 Lower bound of 32bit >= timestamp. All extra sec bits on.",
+			.msb_set = false,
+			.lower_bound = true,
+			.extra_bits = 3,
+			.expected = {.tv_sec = 0x300000000LL, .tv_nsec = 0L},
+		},
+
+		{
+			.test_case_name =
+	"2446-05-10 Upper bound of 32bit >= timestamp. All extra sec bits on.",
+			.msb_set = false,
+			.lower_bound = false,
+			.extra_bits = 3,
+			.expected = {.tv_sec = 0x37fffffffLL, .tv_nsec = 0L},
+		}
+	};
+
+	struct timespec64 timestamp;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(test_data); ++i) {
+		timestamp.tv_sec = get_32bit_time(&test_data[i]);
+		ext4_decode_extra_time(&timestamp,
+				       cpu_to_le32(test_data[i].extra_bits));
+
+		KUNIT_EXPECT_EQ_MSG(test,
+				    test_data[i].expected.tv_sec,
+				    timestamp.tv_sec,
+				    CASE_NAME_FORMAT,
+				    test_data[i].test_case_name,
+				    test_data[i].msb_set,
+				    test_data[i].lower_bound,
+				    test_data[i].extra_bits);
+		KUNIT_EXPECT_EQ_MSG(test,
+				    test_data[i].expected.tv_nsec,
+				    timestamp.tv_nsec,
+				    CASE_NAME_FORMAT,
+				    test_data[i].test_case_name,
+				    test_data[i].msb_set,
+				    test_data[i].lower_bound,
+				    test_data[i].extra_bits);
+	}
+}
+
+static struct kunit_case ext4_inode_test_cases[] = {
+	KUNIT_CASE(inode_test_xtimestamp_decoding),
+	{}
+};
+
+static struct kunit_suite ext4_inode_test_suite = {
+	.name = "ext4_inode_test",
+	.test_cases = ext4_inode_test_cases,
+};
+
+kunit_test_suite(ext4_inode_test_suite);
--
2.23.0.700.g56cf767bdb-goog

             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-12  2:37 Iurii Zaikin [this message]
2019-10-16 20:03 ` Brendan Higgins
2019-10-16 20:58   ` Iurii Zaikin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191012023757.172770-1-yzaikin@google.com \
    --to=yzaikin@google.com \
    --cc=Tim.Bird@sony.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=brendanhiggins@google.com \
    --cc=kunit-dev@googlegroups.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=skhan@linuxfoundation.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ext4 Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ext4/0 linux-ext4/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ext4 linux-ext4/ https://lore.kernel.org/linux-ext4 \
		linux-ext4@vger.kernel.org linux-ext4@archiver.kernel.org
	public-inbox-index linux-ext4

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ext4


AGPL code for this site: git clone https://public-inbox.org/ public-inbox