Linux-ext4 Archive on lore.kernel.org
 help / color / Atom feed
* [RFC PATCH] generic/XXX: Add generic/XXX
@ 2020-01-11  2:18 ira.weiny
  0 siblings, 0 replies; only message in thread
From: ira.weiny @ 2020-01-11  2:18 UTC (permalink / raw)
  To: fstests
  Cc: Ira Weiny, linux-kernel, Darrick J. Wong, Dan Williams,
	Dave Chinner, Christoph Hellwig, Theodore Y. Ts'o, Jan Kara,
	linux-ext4, linux-xfs, linux-fsdevel

From: Ira Weiny <ira.weiny@intel.com>

Add XXX to test the various setting of dax flags on files.

The final fsx test was derived from Christophs test here but I wanted
more direct function tests as well so I bundled this together.

https://www.spinics.net/lists/linux-xfs/msg10124.html

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
---

This is the test case I am using to test the series submitted earlier today.

https://lkml.org/lkml/2020/1/10/864

For my testing I left the fsx tests in a loop which runs for hours rather than
this.

I've also debated moving this to xfs but I intend for ext4 to support this as
well so I have left it in generic for this RFC.

---

 tests/generic/999     | 282 ++++++++++++++++++++++++++++++++++++++++++
 tests/generic/999.out |  21 ++++
 tests/generic/group   |   1 +
 3 files changed, 304 insertions(+)
 create mode 100755 tests/generic/999
 create mode 100644 tests/generic/999.out

diff --git a/tests/generic/999 b/tests/generic/999
new file mode 100755
index 000000000000..6dd5529dbc65
--- /dev/null
+++ b/tests/generic/999
@@ -0,0 +1,282 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Intel, Corp.  All Rights Reserved.
+#
+# FSQA Test No. 999 (temporary)
+#
+# Test setting of DAX flag
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1	# failure is the default!
+
+dax_dir=$TEST_DIR/dax-dir
+dax_sub_dir=$TEST_DIR/dax-dir/dax-sub-dir
+dax_inh_file=$dax_dir/dax-inh-file
+dax_non_inh_file=$dax_dir/dax-non-inh-file
+non_dax=$TEST_DIR/non-dax
+dax_file=$TEST_DIR/dax-file
+dax_file_copy=$TEST_DIR/dax-file-copy
+dax_file_move=$TEST_DIR/dax-file-move
+data_file=$TEST_DIR/data-file
+
+_cleanup() {
+	rm -rf $TEST_DIR/*
+}
+
+trap "_cleanup ; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+
+# real QA test starts here
+_supported_os Linux
+_require_xfs_io_command "lsattr"
+_require_xfs_io_command "chattr" "x"
+_require_xfs_io_command "statx"
+_require_test
+
+function mount_no_dax {
+	# mount SCRATCH_DEV with dax option, TEST_DEV not
+	export MOUNT_OPTIONS=""
+	export TEST_FS_MOUNT_OPTS=""
+	_test_unmount
+	_test_mount
+	_fs_options $TEST_DEV | grep -qw "dax"
+	if [ "$?" == "0" ]; then
+		_notrun "we need $TEST_DEV mount without dax"
+	fi
+}
+
+function mount_dax {
+	# mount SCRATCH_DEV with dax option, TEST_DEV not
+	export MOUNT_OPTIONS=""
+	export TEST_FS_MOUNT_OPTS=""
+	_test_unmount
+	_test_mount "-o dax"
+	_fs_options $TEST_DEV | grep -qw "dax"
+	if [ "$?" != "0" ]; then
+		_notrun "we need $TEST_DEV mount with dax"
+	fi
+}
+
+function check_phys_dax {
+	xfs_io -c 'lsattr' $1 | awk -e '{ print $1 }' | grep 'x' &> /dev/null
+	if [ "$?" != "0" ]; then
+		echo "FAILED: Did NOT find DAX flag on $1"
+		status=1; exit
+	fi
+}
+
+function check_effective_dax {
+	attr=`xfs_io -c 'statx -r' $1 | grep 'stat.attributes' | awk -e '{ print $3 }'`
+	masked=$(( $attr & 0x2000 ))
+	if [ "$masked" != "8192" ]; then
+		echo "FAILED: Did NOT find VFS DAX flag on $1"
+		status=1; exit
+	fi
+}
+
+function check_phys_no_dax {
+	xfs_io -c 'lsattr' $1 | awk -e '{ print $1 }' | grep 'x' &> /dev/null
+	if [ "$?" == "0" ]; then
+		echo "FAILED: Found DAX flag on $1"
+		status=1; exit
+	fi
+}
+
+function check_effective_no_dax {
+	attr=`xfs_io -c 'statx -r' $1 | grep 'stat.attributes' | awk -e '{ print $3 }'`
+	masked=$(( $attr & 0x2000 ))
+	if [ "$masked" == "8192" ]; then
+		echo "FAILED: Found VFS DAX flag on $1"
+		status=1; exit
+	fi
+}
+
+echo "running tests..."
+
+echo "   *** mount w/o dax flag."
+mount_no_dax
+
+echo "   *** mark dax-dir as dax enabled"
+mkdir $dax_dir
+xfs_io -c 'chattr +x' $dax_dir
+check_phys_dax $dax_dir
+check_effective_dax $dax_dir
+
+echo "   *** check file inheritance"
+touch $dax_inh_file
+check_phys_dax $dax_inh_file
+check_effective_dax $dax_inh_file
+
+echo "   *** check directory inheritance"
+mkdir $dax_sub_dir
+check_phys_dax $dax_sub_dir
+check_effective_dax $dax_sub_dir
+
+echo "   *** check changing directory"
+xfs_io -c 'chattr -x' $dax_dir
+check_phys_no_dax $dax_dir
+check_effective_no_dax $dax_dir
+
+echo "   *** check non file inheritance"
+touch $dax_non_inh_file
+check_phys_no_dax $dax_non_inh_file
+check_effective_no_dax $dax_non_inh_file
+
+echo "   *** check that previous file stays enabled"
+check_phys_dax $dax_inh_file
+check_effective_dax $dax_inh_file
+
+echo "   *** Reset the directory"
+xfs_io -c 'chattr +x' $dax_dir
+check_phys_dax $dax_dir
+check_effective_dax $dax_dir
+
+
+# check mount override
+# ====================
+
+echo "   *** Remount fs with mount flag"
+mount_dax
+touch $non_dax
+check_phys_no_dax $non_dax
+check_effective_dax $non_dax
+
+echo "   *** Check for non-dax files to be dax with mount option"
+check_effective_dax $dax_non_inh_file
+
+echo "   *** check for file dax flag 'sticky-ness' after remount"
+touch $dax_file
+xfs_io -c 'chattr +x' $dax_file
+check_phys_dax $dax_file
+check_effective_dax $dax_file
+
+echo "   *** remount w/o mount flag"
+mount_no_dax
+check_phys_dax $dax_file
+check_effective_dax $dax_file
+
+check_phys_no_dax $non_dax
+check_effective_no_dax $non_dax
+
+
+# Check non-zero file operations
+# ==============================
+
+echo "   *** file should change effective but page cache should be empty"
+$XFS_IO_PROG -f -c "pwrite 0 10000" $data_file > /dev/null
+xfs_io -c 'chattr +x' $data_file
+check_phys_dax $data_file
+check_effective_dax $data_file
+
+
+# Check inheritance on cp, mv
+# ===========================
+
+echo "   *** check inheritance on cp, mv"
+cp $non_dax $dax_dir/conv-dax
+check_phys_dax $dax_dir/conv-dax
+check_effective_dax $dax_dir/conv-dax
+
+echo "   *** Moved files 'don't inherit'"
+mv $non_dax $dax_dir/move-dax
+check_phys_no_dax $dax_dir/move-dax
+check_effective_no_dax $dax_dir/move-dax
+
+# Check preservation of phys on cp, mv
+# ====================================
+
+mv $dax_file $dax_file_move
+check_phys_dax $dax_file_move
+check_effective_dax $dax_file_move
+
+cp $dax_file_move $dax_file_copy
+check_phys_no_dax $dax_file_copy
+check_effective_no_dax $dax_file_copy
+
+
+# Verify no mode changes on mmap
+# ==============================
+
+echo "   *** check no mode change when mmaped"
+
+dd if=/dev/zero of=$dax_file bs=4096 count=10 > $tmp.log 2>&1
+
+# set known state.
+xfs_io -c 'chattr -x' $dax_file
+check_phys_no_dax $dax_file
+check_effective_no_dax $dax_file
+
+python3 - << EOF > $tmp.log 2>&1 &
+import mmap
+import time
+print ('mmaping "$dax_file"')
+f=open("$dax_file", "r+b")
+mm = mmap.mmap(f.fileno(), 0)
+print ('mmaped "$dax_file"')
+while True:
+	time.sleep(1)
+EOF
+pid=$!
+
+sleep 1
+
+# attempt to should fail
+xfs_io -c 'chattr +x' $dax_file > /dev/null 2>&1
+check_phys_no_dax $dax_file
+check_effective_no_dax $dax_file
+
+kill -TERM $pid > /dev/null 2>&1
+wait $pid > /dev/null 2>&1
+
+# after mmap released should work
+xfs_io -c 'chattr +x' $dax_file
+check_phys_dax $dax_file
+check_effective_dax $dax_file
+
+
+# Finally run the test stolen from Christoph Hellwig to test changing the mode
+# while performing a series of operations
+# =============================================================================
+
+function run_fsx {
+	options=$1
+
+	echo "   *** run 'fsx $options' racing with setting/clearing the DAX flag"
+	$here/ltp/fsx $options -N 20000 $dax_file > $tmp.log 2>&1 &
+	pid=$!
+
+	if [ ! -n "$pid" ]; then
+		echo "FAILED to start fsx"
+		exit 255
+	fi
+
+	# NOTE: fsx runs much faster than these mode changes.
+	for i in `seq 1 500`; do
+		xfs_io -c 'chattr +x' $dax_file > /dev/null 2>&1
+		xfs_io -c 'chattr -x' $dax_file > /dev/null 2>&1
+	done
+
+	wait $pid
+	status=$?
+	if [ "$status" != "0" ]; then
+		cat /sys/kernel/debug/tracing/trace > trace_output
+		echo "FAILED: fsx exited with status : $status"
+		echo "        see trace_output"
+		head $dax_file.fsxlog
+		exit $status
+	fi
+	pid=""
+}
+
+run_fsx ""
+run_fsx "-A"
+run_fsx "-Z -r 4096 -w 4096"
+
+
+status=0 ; exit
diff --git a/tests/generic/999.out b/tests/generic/999.out
new file mode 100644
index 000000000000..ccb13770ca4d
--- /dev/null
+++ b/tests/generic/999.out
@@ -0,0 +1,21 @@
+QA output created by 999
+running tests...
+   *** mount w/o dax flag.
+   *** mark dax-dir as dax enabled
+   *** check file inheritance
+   *** check directory inheritance
+   *** check changing directory
+   *** check non file inheritance
+   *** check that previous file stays enabled
+   *** Reset the directory
+   *** Remount fs with mount flag
+   *** Check for non-dax files to be dax with mount option
+   *** check for file dax flag 'sticky-ness' after remount
+   *** remount w/o mount flag
+   *** file should change effective but page cache should be empty
+   *** check inheritance on cp, mv
+   *** Moved files 'don't inherit'
+   *** check no mode change when mmaped
+   *** run 'fsx ' racing with setting/clearing the DAX flag
+   *** run 'fsx -A' racing with setting/clearing the DAX flag
+   *** run 'fsx -Z -r 4096 -w 4096' racing with setting/clearing the DAX flag
diff --git a/tests/generic/group b/tests/generic/group
index 90da26c5b42c..c652494f7182 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -594,3 +594,4 @@
 589 auto mount
 590 auto prealloc preallocrw
 591 auto quick rw pipe splice
+999 auto
-- 
2.21.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-11  2:18 [RFC PATCH] generic/XXX: Add generic/XXX ira.weiny

Linux-ext4 Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ext4/0 linux-ext4/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ext4 linux-ext4/ https://lore.kernel.org/linux-ext4 \
		linux-ext4@vger.kernel.org
	public-inbox-index linux-ext4

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ext4


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git