[PATCH AUTOSEL 4.14 010/186] ext4: fix ext4_dax_read/write inode locking sequence for IOCB_NOWAIT

[PATCH AUTOSEL 4.14 010/186] ext4: fix ext4_dax_read/write inode locking sequence for IOCB_NOWAIT

[Sasha Levin]

From: Ritesh Harjani <riteshh@linux.ibm.com>

[ Upstream commit f629afe3369e9885fd6e9cc7a4f514b6a65cf9e9 ]

Apparently our current rwsem code doesn't like doing the trylock, then
lock for real scheme.  So change our dax read/write methods to just do the
trylock for the RWF_NOWAIT case.
This seems to fix AIM7 regression in some scalable filesystems upto ~25%
in some cases. Claimed in commit 942491c9e6d6 ("xfs: fix AIM7 regression")

Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20191212055557.11151-2-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/file.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 4ede0af9d6fe3..acec134da57df 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -38,9 +38,10 @@ static ssize_t ext4_dax_read_iter(struct kiocb *iocb, struct iov_iter *to)
 	struct inode *inode = file_inode(iocb->ki_filp);
 	ssize_t ret;
 
-	if (!inode_trylock_shared(inode)) {
-		if (iocb->ki_flags & IOCB_NOWAIT)
+	if (iocb->ki_flags & IOCB_NOWAIT) {
+		if (!inode_trylock_shared(inode))
 			return -EAGAIN;
+	} else {
 		inode_lock_shared(inode);
 	}
 	/*
@@ -188,9 +189,10 @@ ext4_dax_write_iter(struct kiocb *iocb, struct iov_iter *from)
 	struct inode *inode = file_inode(iocb->ki_filp);
 	ssize_t ret;
 
-	if (!inode_trylock(inode)) {
-		if (iocb->ki_flags & IOCB_NOWAIT)
+	if (iocb->ki_flags & IOCB_NOWAIT) {
+		if (!inode_trylock(inode))
 			return -EAGAIN;
+	} else {
 		inode_lock(inode);
 	}
 	ret = ext4_write_checks(iocb, from);
-- 
2.20.1

[PATCH AUTOSEL 4.14 033/186] jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal

[Sasha Levin]

From: Kai Li <li.kai4@h3c.com>

[ Upstream commit a09decff5c32060639a685581c380f51b14e1fc2 ]

If the journal is dirty when the filesystem is mounted, jbd2 will replay
the journal but the journal superblock will not be updated by
journal_reset() because JBD2_ABORT flag is still set (it was set in
journal_init_common()). This is problematic because when a new transaction
is then committed, it will be recorded in block 1 (journal->j_tail was set
to 1 in journal_reset()). If unclean shutdown happens again before the
journal superblock is updated, the new recorded transaction will not be
replayed during the next mount (because of stale sb->s_start and
sb->s_sequence values) which can lead to filesystem corruption.

Fixes: 85e0c4e89c1b ("jbd2: if the journal is aborted then don't allow update of the log tail")
Signed-off-by: Kai Li <li.kai4@h3c.com>
Link: https://lore.kernel.org/r/20200111022542.5008-1-li.kai4@h3c.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/journal.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index d3cce5c86fd90..b72be822f04f2 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1687,6 +1687,11 @@ int jbd2_journal_load(journal_t *journal)
 		       journal->j_devname);
 		return -EFSCORRUPTED;
 	}
+	/*
+	 * clear JBD2_ABORT flag initialized in journal_init_common
+	 * here to update log tail information with the newest seq.
+	 */
+	journal->j_flags &= ~JBD2_ABORT;
 
 	/* OK, we've finished with the dynamic journal bits:
 	 * reinitialise the dynamic contents of the superblock in memory
@@ -1694,7 +1699,6 @@ int jbd2_journal_load(journal_t *journal)
 	if (journal_reset(journal))
 		goto recovery_error;
 
-	journal->j_flags &= ~JBD2_ABORT;
 	journal->j_flags |= JBD2_LOADED;
 	return 0;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 039/186] ext4, jbd2: ensure panic when aborting with zero errno

[Sasha Levin]

From: "zhangyi (F)" <yi.zhang@huawei.com>

[ Upstream commit 51f57b01e4a3c7d7bdceffd84de35144e8c538e7 ]

JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2
aborted, and then __ext4_abort() and ext4_handle_error() can invoke
panic if ERRORS_PANIC is specified. But if the journal has been aborted
with zero errno, jbd2_journal_abort() didn't set this flag so we can
no longer panic. Fix this by always record the proper errno in the
journal superblock.

Fixes: 4327ba52afd03 ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/checkpoint.c |  2 +-
 fs/jbd2/journal.c    | 15 ++++-----------
 2 files changed, 5 insertions(+), 12 deletions(-)

diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index fe4fe155b7fbe..15d129b7494b0 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -168,7 +168,7 @@ void __jbd2_log_wait_for_space(journal_t *journal)
 				       "journal space in %s\n", __func__,
 				       journal->j_devname);
 				WARN_ON(1);
-				jbd2_journal_abort(journal, 0);
+				jbd2_journal_abort(journal, -EIO);
 			}
 			write_lock(&journal->j_state_lock);
 		} else {
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index b72be822f04f2..eae9ced846d51 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -2128,12 +2128,10 @@ static void __journal_abort_soft (journal_t *journal, int errno)
 
 	__jbd2_journal_abort_hard(journal);
 
-	if (errno) {
-		jbd2_journal_update_sb_errno(journal);
-		write_lock(&journal->j_state_lock);
-		journal->j_flags |= JBD2_REC_ERR;
-		write_unlock(&journal->j_state_lock);
-	}
+	jbd2_journal_update_sb_errno(journal);
+	write_lock(&journal->j_state_lock);
+	journal->j_flags |= JBD2_REC_ERR;
+	write_unlock(&journal->j_state_lock);
 }
 
 /**
@@ -2175,11 +2173,6 @@ static void __journal_abort_soft (journal_t *journal, int errno)
  * failure to disk.  ext3_error, for example, now uses this
  * functionality.
  *
- * Errors which originate from within the journaling layer will NOT
- * supply an errno; a null errno implies that absolutely no further
- * writes are done to the journal (unless there are any already in
- * progress).
- *
  */
 
 void jbd2_journal_abort(journal_t *journal, int errno)
-- 
2.20.1

[PATCH AUTOSEL 4.14 157/186] jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record

[Sasha Levin]

From: "zhangyi (F)" <yi.zhang@huawei.com>

[ Upstream commit d0a186e0d3e7ac05cc77da7c157dae5aa59f95d9 ]

We invoke jbd2_journal_abort() to abort the journal and record errno
in the jbd2 superblock when committing journal transaction besides the
failure on submitting the commit record. But there is no need for the
case and we can also invoke jbd2_journal_abort() instead of
__jbd2_journal_abort_hard().

Fixes: 818d276ceb83a ("ext4: Add the journal checksum feature")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/commit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 7dd6133925921..90f9a6ad3ebf1 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -783,7 +783,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 		err = journal_submit_commit_record(journal, commit_transaction,
 						 &cbh, crc32_sum);
 		if (err)
-			__jbd2_journal_abort_hard(journal);
+			jbd2_journal_abort(journal, err);
 	}
 
 	blk_finish_plug(&plug);
@@ -876,7 +876,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 		err = journal_submit_commit_record(journal, commit_transaction,
 						&cbh, crc32_sum);
 		if (err)
-			__jbd2_journal_abort_hard(journal);
+			jbd2_journal_abort(journal, err);
 	}
 	if (cbh)
 		err = journal_wait_on_commit_record(journal, cbh);
-- 
2.20.1

[PATCH AUTOSEL 4.14 158/186] jbd2: make sure ESHUTDOWN to be recorded in the journal superblock

[Sasha Levin]

From: "zhangyi (F)" <yi.zhang@huawei.com>

[ Upstream commit 0e98c084a21177ef136149c6a293b3d1eb33ff92 ]

Commit fb7c02445c49 ("ext4: pass -ESHUTDOWN code to jbd2 layer") want
to allow jbd2 layer to distinguish shutdown journal abort from other
error cases. So the ESHUTDOWN should be taken precedence over any other
errno which has already been recoded after EXT4_FLAGS_SHUTDOWN is set,
but it only update errno in the journal suoerblock now if the old errno
is 0.

Fixes: fb7c02445c49 ("ext4: pass -ESHUTDOWN code to jbd2 layer")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/journal.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index eae9ced846d51..6e054b368b5fe 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -2119,8 +2119,7 @@ static void __journal_abort_soft (journal_t *journal, int errno)
 
 	if (journal->j_flags & JBD2_ABORT) {
 		write_unlock(&journal->j_state_lock);
-		if (!old_errno && old_errno != -ESHUTDOWN &&
-		    errno == -ESHUTDOWN)
+		if (old_errno != -ESHUTDOWN && errno == -ESHUTDOWN)
 			jbd2_journal_update_sb_errno(journal);
 		return;
 	}
-- 
2.20.1