linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lukas Czerner <lczerner@redhat.com>
To: Eric Sandeen <sandeen@redhat.com>
Cc: "linux-ext4@vger.kernel.org" <linux-ext4@vger.kernel.org>
Subject: Re: [PATCH 1/1] ext4: fix potential negative array index in do_split()
Date: Fri, 19 Jun 2020 13:16:31 +0200	[thread overview]
Message-ID: <20200619111631.ugx7sdpci32ohgir@work> (raw)
In-Reply-To: <20200619070854.z3dslhh7yebainhd@work>

On Fri, Jun 19, 2020 at 09:08:54AM +0200, Lukas Czerner wrote:
> On Fri, Jun 19, 2020 at 08:41:22AM +0200, Lukas Czerner wrote:
> > On Wed, Jun 17, 2020 at 02:19:04PM -0500, Eric Sandeen wrote:
> > > If for any reason a directory passed to do_split() does not have enough
> > > active entries to exceed half the size of the block, we can end up
> > > iterating over all "count" entries without finding a split point.
> > > 
> > > In this case, count == move, and split will be zero, and we will
> > > attempt a negative index into map[].
> > > 
> > > Guard against this by detecting this case, and falling back to
> > > split-to-half-of-count instead; in this case we will still have
> > > plenty of space (> half blocksize) in each split block.
> > > 
> > > Fixes: ef2b02d3e617 ("ext34: ensure do_split leaves enough free space in both blocks")
> > > Signed-off-by: Eric Sandeen <sandeen@redhat.com>
> > > ---
> > > 
> > > diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
> > > index a8aca4772aaa..8b60881f07ee 100644
> > > --- a/fs/ext4/namei.c
> > > +++ b/fs/ext4/namei.c
> > > @@ -1858,7 +1858,7 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir,
> > >  			     blocksize, hinfo, map);
> > >  	map -= count;
> > >  	dx_sort_map(map, count);
> > > -	/* Split the existing block in the middle, size-wise */
> > > +	/* Ensure that neither split block is over half full */
> > >  	size = 0;
> > >  	move = 0;
> > >  	for (i = count-1; i >= 0; i--) {
> > > @@ -1868,8 +1868,18 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir,
> > >  		size += map[i].size;
> > >  		move++;
> > >  	}
> > > -	/* map index at which we will split */
> > > -	split = count - move;
> > > +	/*
> > > +	 * map index at which we will split
> > > +	 *
> > > +	 * If the sum of active entries didn't exceed half the block size, just
> > > +	 * split it in half by count; each resulting block will have at least
> > > +	 * half the space free.
> > > +	 */
> > > +	if (i > 0)
> > > +		split = count - move;
> > > +	else
> > > +		split = count/2;
> > 
> > Won't we have exactly the same problem as we did before your commit
> > ef2b02d3e617cb0400eedf2668f86215e1b0e6af ? Since we do not know how much
> > space we actually moved we might have not made enough space for the new
> > entry ?
> > 
> > Also since we have the move == count when the problem appears then it's
> > clear that we never hit the condition
> > 
> > 1865 →       →       /* is more than half of this entry in 2nd half of the block? */
> > 1866 →       →       if (size + map[i].size/2 > blocksize/2)
> > 1867 →       →       →       break;
> > 
> > in the loop. This is surprising but it means the the entries must have
> > gaps between them that are small enough that we can't fit the entry
> > right in ? Should not we try to compact it before splitting, or is it
> > the case that this should have been done somewhere else ?
> 
> The other possibility is that map[i].size is not right and indeed there
> seems to be a bug in dx_make_map()
> 
> map_tail->size = le16_to_cpu(de->rec_len);
> 
> should be
> 
> map_tail->size = ext4_rec_len_from_disk(de->rec_len, blocksize));
> 
> right ? Otherwise with large enough records the size will be smaller
> than it really is.
> 
> A quick look at fs/ext4/namei.c reveals couple of places there rec_len
> is used without the conversion and we should check whether it needs
> fixing.
> 
> -Lukas

And indeed the following patch seems to have fixed the issue we were
seeing. Eric I think that this might be a proper fix. But we still need
to check the other uses of rec_len to make sure it's ok as well.

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 94ec882..5509fdc 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1068,7 +1068,7 @@ static int dx_make_map(struct ext4_dir_entry_2 *de, unsigned blocksize,
                        map_tail--;
                        map_tail->hash = h.hash;
                        map_tail->offs = ((char *) de - base)>>2;
-                       map_tail->size = le16_to_cpu(de->rec_len);
+                       map_tail->size = ext4_rec_len_from_disk(le16_to_cpu(de->rec_len), blocksize);
                        count++;
                        cond_resched();
                }


> 
> 
> 
> > 
> > If we really want ot be fair and we want to split it right in the middle
> > of the entries size-wise then we need to keep track of of sum of the
> > entries and decide based on that, not blocksize/2. But maybe the problem
> > could be solved by compacting the entries together because the condition
> > seems to rely on that.
> > 
> > -Lukas
> > 
> > > +
> > >  	hash2 = map[split].hash;
> > >  	continued = hash2 == map[split - 1].hash;
> > >  	dxtrace(printk(KERN_INFO "Split block %lu at %x, %i/%i\n",
> > > 
> > > 
> > 
> 


  reply	other threads:[~2020-06-19 11:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-17 19:01 [PATCH 0/1] ext4: fix potential negative array index in do_split Eric Sandeen
2020-06-17 19:19 ` [PATCH 1/1] ext4: fix potential negative array index in do_split() Eric Sandeen
2020-06-19  0:33   ` Andreas Dilger
2020-06-19  6:41   ` Lukas Czerner
2020-06-19  7:08     ` Lukas Czerner
2020-06-19 11:16       ` Lukas Czerner [this message]
2020-06-19 13:44         ` Eric Sandeen
2020-06-19 13:53           ` Lukas Czerner
2020-06-19 13:42       ` Eric Sandeen
2020-06-19 13:49         ` Lukas Czerner
2020-06-19 13:39     ` Eric Sandeen
2020-07-08 16:09       ` Jan Kara
2020-07-30  1:48   ` tytso
2020-06-19  2:31 ` [PATCH 0/1] ext4: fix potential negative array index in do_split Andreas Dilger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200619111631.ugx7sdpci32ohgir@work \
    --to=lczerner@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=sandeen@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).