Linux-ext4 Archive on lore.kernel.org
 help / color / Atom feed
From: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
To: linux-ext4@vger.kernel.org
Cc: tytso@mit.edu, Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Subject: [PATCH v8 1/7] doc: update ext4 and journalling docs to include fast commit feature
Date: Tue, 21 Jul 2020 11:43:49 -0700
Message-ID: <20200721184355.1616986-2-harshadshirwadkar@gmail.com> (raw)
In-Reply-To: <20200721184355.1616986-1-harshadshirwadkar@gmail.com>

This patch adds necessary documentation for fast commits.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
---
 Documentation/filesystems/ext4/journal.rst | 66 ++++++++++++++++++++++
 Documentation/filesystems/journalling.rst  | 28 +++++++++
 2 files changed, 94 insertions(+)

diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst
index ea613ee701f5..c2e4d010a201 100644
--- a/Documentation/filesystems/ext4/journal.rst
+++ b/Documentation/filesystems/ext4/journal.rst
@@ -28,6 +28,17 @@ metadata are written to disk through the journal. This is slower but
 safest. If ``data=writeback``, dirty data blocks are not flushed to the
 disk before the metadata are written to disk through the journal.
 
+In case of ``data=ordered`` mode, Ext4 also supports fast commits which
+help reduce commit latency significantly. The default ``data=ordered``
+mode works by logging metadata blocks tothe journal. In fast commit
+mode, Ext4 only stores the minimal delta needed to recreate the
+affected metadata in fast commit space that is shared with JBD2.
+Once the fast commit area fills in or if fast commit is not possible
+or if JBD2 commit timer goes off, Ext4 performs a traditional full commit.
+A full commit invalidates all the fast commits that happened before
+it and thus it makes the fast commit area empty for further fast
+commits. This feature needs to be enabled at compile time.
+
 The journal inode is typically inode 8. The first 68 bytes of the
 journal inode are replicated in the ext4 superblock. The journal itself
 is normal (but hidden) file within the filesystem. The file usually
@@ -609,3 +620,58 @@ bytes long (but uses a full block):
      - h\_commit\_nsec
      - Nanoseconds component of the above timestamp.
 
+Fast commits
+~~~~~~~~~~~~
+
+Fast commit area is organized as a log of tag tag length values. Each TLV has
+a ``struct ext4_fc_tl`` in the beginning which stores the tag and the length
+of the entire field. It is followed by variable length tag specific value.
+Here is the list of supported tags and their meanings:
+
+.. list-table::
+   :widths: 8 20 20 32
+   :header-rows: 1
+
+   * - Tag
+     - Meaning
+     - Value struct
+     - Description
+   * - EXT4_FC_TAG_HEAD
+     - Fast commit area header
+     - ``struct ext4_fc_head``
+     - Stores the TID of the transaction after which these fast commits should
+       be applied.
+   * - EXT4_FC_TAG_ADD_RANGE
+     - Add extent to inode
+     - ``struct ext4_fc_add_range``
+     - Stores the inode number and extent to be added in this inode
+   * - EXT4_FC_TAG_DEL_RANGE
+     - Remove logical offsets to inode
+     - ``struct ext4_fc_del_range``
+     - Stores the inode number and the logical offset range that needs to be
+       removed
+   * - EXT4_FC_TAG_CREAT
+     - Create directory entry for a newly created file
+     - ``struct ext4_fc_dentry_info``
+     - Stores the parent inode numer, inode number and directory entry of the
+       newly created file
+   * - EXT4_FC_TAG_LINK
+     - Link a directory entry to an inode
+     - ``struct ext4_fc_dentry_info``
+     - Stores the parent inode numer, inode number and directory entry
+   * - EXT4_FC_TAG_UNLINK
+     - Unink a directory entry of an inode
+     - ``struct ext4_fc_dentry_info``
+     - Stores the parent inode numer, inode number and directory entry
+
+   * - EXT4_FC_TAG_PAD
+     - Padding (unused area)
+     - None
+     - Unused bytes in the fast commit area.
+
+   * - EXT4_FC_TAG_TAIL
+     - Mark the end of a fast commit
+     - ``struct ext4_fc_tail``
+     - Stores the TID of the commit, CRC of the fast commit of which this tag
+       represents the end of
+
diff --git a/Documentation/filesystems/journalling.rst b/Documentation/filesystems/journalling.rst
index 58ce6b395206..a9817220dc9b 100644
--- a/Documentation/filesystems/journalling.rst
+++ b/Documentation/filesystems/journalling.rst
@@ -132,6 +132,34 @@ The opportunities for abuse and DOS attacks with this should be obvious,
 if you allow unprivileged userspace to trigger codepaths containing
 these calls.
 
+Fast commits
+~~~~~~~~~~~~
+
+JBD2 to also allows you to perform file-system specific delta commits known as
+fast commits. In order to use fast commits, you first need to call
+:c:func:`jbd2_fc_init` and tell how many blocks at the end of journal
+area should be reserved for fast commits. Along with that, you will also need
+to set following callbacks that perform correspodning work:
+
+`journal->j_fc_cleanup_cb`: Cleanup function called after every full commit and
+fast commit.
+
+`journal->j_fc_replay_cb`: Replay function called for replay of fast commit
+blocks.
+
+File system is free to perform fast commits as and when it wants as long as it
+gets permission from JBD2 to do so by calling the function
+:c:func:`jbd2_fc_start()`. Once a fast commit is done, the client
+file  system should tell JBD2 about it by calling :c:func:`jbd2_fc_stop()`.
+If file system wants JBD2 to perform a full commit immediately after stopping
+the fast commit it can do so by calling :c:func:`jbd2_fc_stop_do_commit()`.
+This is useful if fast commit operation fails for some reason and the only way
+to guarantee consistency is for JBD2 to perform the full traditional commit.
+
+JBD2 helper functions to manage fast commit buffers. File system can use
+:c:func:`jbd2_fc_get_buf()` and :c:func:`jbd2_fc_wait_bufs()` to allocate
+and wait on IO completion of fast commit buffers.
+
 Summary
 ~~~~~~~
 
-- 
2.28.0.rc0.105.gf9edc3c819-goog


  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-21 18:43 [PATCH v8 0/7] ext4: add fast commits feature Harshad Shirwadkar
2020-07-21 18:43 ` Harshad Shirwadkar [this message]
2020-07-21 18:43 ` [PATCH v8 2/7] ext4: add fast_commit feature and handling for extended mount options Harshad Shirwadkar
2020-07-21 18:43 ` [PATCH v8 3/7] ext4 / jbd2: add fast commit initialization Harshad Shirwadkar
2020-07-21 18:43 ` [PATCH v8 4/7] jbd2: add fast commit machinery Harshad Shirwadkar
2020-07-21 18:43 ` [PATCH v8 5/7] ext4: main fast-commit commit path Harshad Shirwadkar
2020-07-21 18:43 ` [PATCH v8 6/7] jbd2: fast commit recovery path Harshad Shirwadkar
2020-07-21 18:43 ` [PATCH v8 7/7] ext4: " Harshad Shirwadkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200721184355.1616986-2-harshadshirwadkar@gmail.com \
    --to=harshadshirwadkar@gmail.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ext4 Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ext4/0 linux-ext4/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ext4 linux-ext4/ https://lore.kernel.org/linux-ext4 \
		linux-ext4@vger.kernel.org
	public-inbox-index linux-ext4

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ext4


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git