linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
To: Jan Kara <jack@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>,
	tytso@mit.edu, Andreas Dilger <adilger.kernel@dilger.ca>,
	linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org
Subject: [PATCH 1/3] quota: Prevent memory allocation recursion while holding dq_lock
Date: Sun,  5 Jun 2022 15:38:13 +0100	[thread overview]
Message-ID: <20220605143815.2330891-2-willy@infradead.org> (raw)
In-Reply-To: <20220605143815.2330891-1-willy@infradead.org>

As described in commit 02117b8ae9c0 ("f2fs: Set GF_NOFS in
read_cache_page_gfp while doing f2fs_quota_read"), we must not enter
filesystem reclaim while holding the dq_lock.  Prevent this more generally
by using memalloc_nofs_save() while holding the lock.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
---
 fs/quota/dquot.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index a74aef99bd3d..cdb22d6d7488 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -425,9 +425,11 @@ EXPORT_SYMBOL(mark_info_dirty);
 int dquot_acquire(struct dquot *dquot)
 {
 	int ret = 0, ret2 = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	if (!test_bit(DQ_READ_B, &dquot->dq_flags)) {
 		ret = dqopt->ops[dquot->dq_id.type]->read_dqblk(dquot);
 		if (ret < 0)
@@ -458,6 +460,7 @@ int dquot_acquire(struct dquot *dquot)
 	smp_mb__before_atomic();
 	set_bit(DQ_ACTIVE_B, &dquot->dq_flags);
 out_iolock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
@@ -469,9 +472,11 @@ EXPORT_SYMBOL(dquot_acquire);
 int dquot_commit(struct dquot *dquot)
 {
 	int ret = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	if (!clear_dquot_dirty(dquot))
 		goto out_lock;
 	/* Inactive dquot can be only if there was error during read/init
@@ -481,6 +486,7 @@ int dquot_commit(struct dquot *dquot)
 	else
 		ret = -EIO;
 out_lock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
@@ -492,9 +498,11 @@ EXPORT_SYMBOL(dquot_commit);
 int dquot_release(struct dquot *dquot)
 {
 	int ret = 0, ret2 = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	/* Check whether we are not racing with some other dqget() */
 	if (dquot_is_busy(dquot))
 		goto out_dqlock;
@@ -510,6 +518,7 @@ int dquot_release(struct dquot *dquot)
 	}
 	clear_bit(DQ_ACTIVE_B, &dquot->dq_flags);
 out_dqlock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
-- 
2.35.1


  reply	other threads:[~2022-06-05 14:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-05 14:38 [PATCH 0/3] Cache quota files in the page cache Matthew Wilcox (Oracle)
2022-06-05 14:38 ` Matthew Wilcox (Oracle) [this message]
2022-06-06  8:03   ` [PATCH 1/3] quota: Prevent memory allocation recursion while holding dq_lock Jan Kara
2022-06-06 12:42     ` Matthew Wilcox
2022-06-06 13:08       ` Jan Kara
2022-06-05 14:38 ` [PATCH 2/3] quota: Support using the page cache for quota files Matthew Wilcox (Oracle)
2022-06-06  2:53   ` kernel test robot
2022-06-06  4:05   ` kernel test robot
2022-06-06  4:36   ` kernel test robot
2022-06-05 14:38 ` [PATCH 3/3] ext4: Use generic_quota_read() Matthew Wilcox (Oracle)
2022-06-06  8:38   ` Jan Kara
2022-06-08  1:42     ` Matthew Wilcox
2022-06-08 14:21       ` Jan Kara
2022-06-13  7:59   ` [ext4] fa96490369: WARNING:at_fs/ext4/inode.c:#ext4_invalidate_folio kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220605143815.2330891-2-willy@infradead.org \
    --to=willy@infradead.org \
    --cc=adilger.kernel@dilger.ca \
    --cc=jack@suse.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).