linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] generic: ENOSPC regression test in a multi-threaded scenario
@ 2020-11-27 10:54 Pratik Rajesh Sampat
  2020-11-29 11:43 ` Eryu Guan
  0 siblings, 1 reply; 3+ messages in thread
From: Pratik Rajesh Sampat @ 2020-11-27 10:54 UTC (permalink / raw)
  To: fstests, linux-ext4, riteshh, sourabhjain, psampat, pratik.r.sampat

Test allocation strategies of the file system and validate space
anomalies as reported by the system versus the allocated by the
program.

The test is motivated by a bug in ext4 systems where-in ENOSPC is
reported by the file system even though enough space for allocations is
available[1].
[1]: https://patchwork.ozlabs.org/patch/1294003

Suggested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Co-authored-by: Sourabh Jain <sourabhjain@linux.ibm.com>

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
---
 src/Makefile          |   2 +-
 src/t_enospc.c        | 186 ++++++++++++++++++++++++++++++++++++++++++
 tests/generic/618     | 168 ++++++++++++++++++++++++++++++++++++++
 tests/generic/618.out |   2 +
 tests/generic/group   |   1 +
 5 files changed, 358 insertions(+), 1 deletion(-)
 create mode 100644 src/t_enospc.c
 create mode 100755 tests/generic/618
 create mode 100644 tests/generic/618.out

diff --git a/src/Makefile b/src/Makefile
index 919d77c4..32940142 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -17,7 +17,7 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
 	t_mmap_cow_race t_mmap_fallocate fsync-err t_mmap_write_ro \
 	t_ext4_dax_journal_corruption t_ext4_dax_inline_corruption \
 	t_ofd_locks t_mmap_collision mmap-write-concurrent \
-	t_get_file_time t_create_short_dirs t_create_long_dirs
+	t_get_file_time t_create_short_dirs t_create_long_dirs t_enospc
 
 LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
 	preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
diff --git a/src/t_enospc.c b/src/t_enospc.c
new file mode 100644
index 00000000..a0a8c783
--- /dev/null
+++ b/src/t_enospc.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 IBM.
+ * All Rights Reserved.
+ *
+ * simple mmap write multithreaded test
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <assert.h>
+#include <sys/mman.h>
+#include <pthread.h>
+#include <signal.h>
+
+#define pr_debug(fmt, ...) do { \
+    if (verbose) { \
+        printf (fmt, ##__VA_ARGS__); \
+    } \
+} while (0)
+
+struct thread_s {
+	int id;
+};
+
+static float file_ratio[2] = {0.5, 0.5};
+static unsigned long fsize = 0;
+static char *base_dir = ".";
+static char *ratio = "1";
+
+static bool use_fallocate = false;
+static bool verbose = false;
+
+pthread_barrier_t bar;
+
+void handle_sigbus(int sig)
+{
+	pr_debug("Enospc test failed with SIGBUS\n");
+	exit(7);
+}
+
+void enospc_test(int id)
+{
+	int fd;
+	char fpath[255] = {0};
+	char *addr;
+	unsigned long size = 0;
+
+	if (id % 2 == 0)
+		size = fsize * file_ratio[0];
+	else
+		size = fsize * file_ratio[1];
+
+	pthread_barrier_wait(&bar);
+
+	sprintf(fpath, "%s/mmap-file-%d", base_dir, id);
+	pr_debug("Test write phase starting file %s fsize %lu, id %d\n", fpath, size, id);
+
+	signal(SIGBUS, handle_sigbus);
+
+	fd = open(fpath, O_RDWR | O_CREAT, 0644);
+	if (fd < 0) {
+		pr_debug("Open failed\n");
+		exit(1);
+	}
+
+	if (use_fallocate)
+		assert(fallocate(fd, 0, 0, fsize) == 0);
+	else
+		assert(ftruncate(fd, size) == 0);
+
+	addr = mmap(NULL, size, PROT_WRITE, MAP_SHARED, fd, 0);
+	assert(addr != MAP_FAILED);
+
+	for (int i = 0; i < size; i++) {
+		addr[i] = 0xAB;
+	}
+
+	assert(munmap(addr, size) != -1);
+	close(fd);
+	pr_debug("Test write phase completed...file %s, fsize %lu, id %d\n", fpath, size, id);
+}
+
+void *spawn_test_thread(void *arg)
+{
+	struct thread_s *thread_info = (struct thread_s *)arg;
+	pthread_t tid;
+
+	tid = pthread_self();
+	pr_debug("Inside thread %lu %d\n", tid, thread_info->id);
+	enospc_test(thread_info->id);
+	return NULL;
+}
+
+void _run_test(int threads)
+{
+	pthread_t tid[threads];
+
+	pthread_barrier_init(&bar, NULL, threads+1);
+	for (int i = 0; i < threads; i++) {
+		struct thread_s *thread_info = (struct thread_s *) malloc(sizeof(struct thread_s));
+		thread_info->id = i;
+		assert(pthread_create(&tid[i], NULL, spawn_test_thread, thread_info) == 0);
+	}
+
+	pthread_barrier_wait(&bar);
+
+	for (int i = 0; i <threads; i++) {
+		assert(pthread_join(tid[i], NULL) == 0);
+	}
+
+	pthread_barrier_destroy(&bar);
+	return;
+}
+
+static void usage(void)
+{
+	printf("\nUsage: t_enospc [options]\n\n"
+	       " -t                    thread count\n"
+	       " -s size               file size\n"
+	       " -p path               set base path\n"
+	       " -f fallocate          use fallocate instead of ftruncate\n"
+	       " -v verbose            print debug information\n"
+	       " -r ratio              ratio of file sizes\n");
+}
+
+int main(int argc, char *argv[])
+{
+	int opt;
+	int threads = 0;
+	char *ratio_ptr;
+
+	while ((opt = getopt(argc, argv, ":r:p:t:s:vf")) != -1) {
+		switch(opt) {
+		case 't':
+			threads = atoi(optarg);
+			pr_debug("Testing with (%d) threads\n", threads);
+			break;
+		case 's':
+			fsize = atoi(optarg);
+			pr_debug("size: %lu Bytes\n", fsize);
+			break;
+		case 'p':
+			base_dir = optarg;
+			break;
+		case 'r':
+			ratio = optarg;
+			ratio_ptr = strtok(ratio, ",");
+			if (ratio_ptr[0] == '1') {
+				file_ratio[0] = 1;
+				file_ratio[1] = 1;
+				break;
+			}
+			if (ratio_ptr != NULL)
+				file_ratio[0] = strtod(ratio_ptr, NULL);
+			ratio_ptr = strtok(NULL, ",");
+			if (ratio_ptr != NULL)
+				file_ratio[1] = strtod(ratio_ptr, NULL);
+			break;
+		case 'f':
+			use_fallocate = true;
+			break;
+		case 'v':
+			verbose = true;
+			break;
+		case '?':
+			usage();
+			exit(1);
+		}
+	}
+
+	/* Sanity test of parameters */
+	assert(threads);
+	assert(fsize);
+	assert(file_ratio[0]);
+	assert(file_ratio[1]);
+
+	pr_debug("Testing with (%d) threads\n", threads);
+	pr_debug("size: %lu Bytes\n", fsize);
+
+	_run_test(threads);
+	return 0;
+}
diff --git a/tests/generic/618 b/tests/generic/618
new file mode 100755
index 00000000..57216b3d
--- /dev/null
+++ b/tests/generic/618
@@ -0,0 +1,168 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020 IBM Corporation. All Rights Reserved.
+#
+# FS QA Test 618
+# ENOSPC regression test in a multi-threaded scenario. Test allocation
+# strategies of the file system and validate space anomalies as reported by
+# the system versus the allocated by the program.
+#
+# With this we should be able to catch similar regressions as reported on
+# ext4 on 5.7 kernel which was fixed by patch [1]
+# [1]: https://patchwork.ozlabs.org/patch/1294003
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+FS_SIZE=$((240*1024*1024)) # 240MB
+DEBUG=0 # set to 1 to enable debug statements in shell and c-prog
+FACT=0.7
+
+# Disk allocation methods
+FALLOCATE=1
+FTRUNCATE=2
+
+# Helps to build TEST_VECTORS
+SMALL_FILE_SIZE=$((512 * 1024)) # in Bytes
+BIG_FILE_SIZE=$((1536 * 1024))  # in Bytes
+MIX_FILE_SIZE=$((2048 * 1024))  # (BIG + SMALL small file size)
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# Modify as appropriate.
+_supported_fs generic
+_require_test
+_require_scratch
+_require_test_program "t_enospc"
+
+debug()
+{
+	if [ $DEBUG -eq 1 ]; then
+		echo >&2 "func->${FUNCNAME[1]}: $1"
+	fi
+}
+
+# Calculate the number of threads needed to fill the disk space
+calc_thread_cnt()
+{
+	local file_ratio_unit=$1
+	local file_ratio=$2
+	local disk_saturation=$3
+	local tot_avail_size
+	local avail_size
+	local thread_cnt
+
+	IFS=',' read -ra fratio <<< $file_ratio
+	file_ratio_cnt=${#fratio[@]}
+
+	tot_avail_size=$(df --block-size=1 $SCRATCH_DEV | awk 'FNR == 2 { print $4 }')
+	avail_size=$(echo $tot_avail_size*$disk_saturation | bc)
+	thread_cnt=$(echo "$file_ratio_cnt*($avail_size/$file_ratio_unit)" | bc)
+
+	debug "Total available size: $tot_avail_size"
+	debug "Available size: $avail_size"
+	debug "Thread count: $thread_cnt"
+
+	echo ${thread_cnt}
+}
+
+run_testcase()
+{
+	IFS=':' read -ra args <<< $1
+	local test_name=${args[0]}
+	local file_ratio_unit=${args[1]}
+	local file_ratio=${args[2]}
+	local disk_saturation=${args[3]}
+	local disk_alloc_method=${args[4]}
+	local test_iteration_cnt=${args[5]}
+	local extra_args=""
+	local thread_cnt
+
+	if [ "$disk_alloc_method" == "$FTRUNCATE" ]; then
+		extra_args="$extra_args -f"
+	fi
+
+	# enable the debug statements in c program
+	if [ "$DEBUG" -eq 1 ]; then
+		extra_args="$extra_args -v"
+	fi
+
+	for i in $(eval echo "{1..$test_iteration_cnt}")
+	do
+		# Setup the device
+		_scratch_mkfs_sized $FS_SIZE >> $seqres.full 2>&1
+		_scratch_mount
+
+		thread_cnt=$(calc_thread_cnt $file_ratio_unit $file_ratio $disk_saturation)
+
+		debug "====== Test details starts ======"
+		debug "Test name: $test_name"
+		debug "File ratio unit: $file_ratio_unit"
+		debug "File ratio: $file_ratio"
+		debug "Disk saturation $disk_saturation"
+		debug "Disk alloc method $disk_alloc_method"
+		debug "Test iteration count: $test_iteration_cnt"
+		debug "Extra arg: $extra_args"
+		debug "Thread count: $thread_cnt"
+		debug "============ end ==============="
+
+		# Start the test
+		$here/src/t_enospc -t $thread_cnt -s $file_ratio_unit -r $file_ratio -p $SCRATCH_MNT $extra_args
+
+		status=$(echo $?)
+		if [ $status -ne 0 ]; then
+			use_per=$(df -h | grep $SCRATCH_MNT | awk '{print substr($5, 1, length($5)-1)}' | bc)
+			alloc_per=$(echo "$FACT * 100" | bc)
+			# We are here since t_nospc failed with an error code.
+			# If the used filesystem space is still < available space - that means
+			# the test failed due to FS wrongly reported ENOSPC.
+			if [ $(echo "$use_per < $alloc_per" | bc) -ne 0 ]; then
+				if [ $status -eq 134 ]; then
+					echo "FAIL: Aborted assertion faliure"
+				elif [ $status -eq 7 ]; then
+					echo "FAIL: ENOSPC BUS faliure"
+				fi
+				echo "$test_name failed at iteration count: $i"
+				echo "$(df -h $SCRATCH_MNT)"
+				echo "Allocated: $alloc_per% Used: $use_per%"
+				exit
+			fi
+		fi
+
+		# Make space for other tests
+		_scratch_unmount
+	done
+}
+
+declare -a TEST_VECTORS=(
+# test-name:file-ratio-unit:file-ratio:disk-saturation:disk-alloc-method:test-iteration-cnt
+"Small-file-test:$SMALL_FILE_SIZE:1:$FACT:$FALLOCATE:3"
+"Big-file-test:$BIG_FILE_SIZE:1:$FACT:$FALLOCATE:3"
+"Mix-file-test:$MIX_FILE_SIZE:0.75,0.25:$FACT:$FALLOCATE:3"
+)
+
+# real QA test starts here
+for i in "${TEST_VECTORS[@]}"; do
+	run_testcase $i
+done
+
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/generic/618.out b/tests/generic/618.out
new file mode 100644
index 00000000..8940b72f
--- /dev/null
+++ b/tests/generic/618.out
@@ -0,0 +1,2 @@
+QA output created by 618
+Silence is golden
diff --git a/tests/generic/group b/tests/generic/group
index 94e860b8..dc668c06 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -620,3 +620,4 @@
 615 auto rw
 616 auto rw io_uring stress
 617 auto rw io_uring stress
+618 auto rw stress
-- 
2.28.0


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH] generic: ENOSPC regression test in a multi-threaded scenario
  2020-11-27 10:54 [PATCH] generic: ENOSPC regression test in a multi-threaded scenario Pratik Rajesh Sampat
@ 2020-11-29 11:43 ` Eryu Guan
  2020-12-01 11:27   ` Pratik Sampat
  0 siblings, 1 reply; 3+ messages in thread
From: Eryu Guan @ 2020-11-29 11:43 UTC (permalink / raw)
  To: Pratik Rajesh Sampat
  Cc: fstests, linux-ext4, riteshh, sourabhjain, pratik.r.sampat

On Fri, Nov 27, 2020 at 04:24:15PM +0530, Pratik Rajesh Sampat wrote:
> Test allocation strategies of the file system and validate space
> anomalies as reported by the system versus the allocated by the
> program.
> 
> The test is motivated by a bug in ext4 systems where-in ENOSPC is
> reported by the file system even though enough space for allocations is
> available[1].
> [1]: https://patchwork.ozlabs.org/patch/1294003

I see that the referenced patch has been upstreamed, Would you please
reference the commit with commit id and title as well? So it's easier to
know which commit fixed the bug.

> 
> Suggested-by: Ritesh Harjani <riteshh@linux.ibm.com>
> Co-authored-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> 
> Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
> ---
>  src/Makefile          |   2 +-
>  src/t_enospc.c        | 186 ++++++++++++++++++++++++++++++++++++++++++

Need an entry in .gitignore as well.

>  tests/generic/618     | 168 ++++++++++++++++++++++++++++++++++++++
>  tests/generic/618.out |   2 +
>  tests/generic/group   |   1 +
>  5 files changed, 358 insertions(+), 1 deletion(-)
>  create mode 100644 src/t_enospc.c
>  create mode 100755 tests/generic/618
>  create mode 100644 tests/generic/618.out
> 
> diff --git a/src/Makefile b/src/Makefile
> index 919d77c4..32940142 100644
> --- a/src/Makefile
> +++ b/src/Makefile
> @@ -17,7 +17,7 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
>  	t_mmap_cow_race t_mmap_fallocate fsync-err t_mmap_write_ro \
>  	t_ext4_dax_journal_corruption t_ext4_dax_inline_corruption \
>  	t_ofd_locks t_mmap_collision mmap-write-concurrent \
> -	t_get_file_time t_create_short_dirs t_create_long_dirs
> +	t_get_file_time t_create_short_dirs t_create_long_dirs t_enospc
>  
>  LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
>  	preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
> diff --git a/src/t_enospc.c b/src/t_enospc.c
> new file mode 100644
> index 00000000..a0a8c783
> --- /dev/null
> +++ b/src/t_enospc.c
> @@ -0,0 +1,186 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 IBM.
> + * All Rights Reserved.
> + *
> + * simple mmap write multithreaded test
> + */
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <stdbool.h>
> +#include <unistd.h>
> +#include <fcntl.h>
> +#include <string.h>
> +#include <assert.h>
> +#include <sys/mman.h>
> +#include <pthread.h>
> +#include <signal.h>
> +
> +#define pr_debug(fmt, ...) do { \
> +    if (verbose) { \
> +        printf (fmt, ##__VA_ARGS__); \
> +    } \
> +} while (0)
> +
> +struct thread_s {
> +	int id;
> +};
> +
> +static float file_ratio[2] = {0.5, 0.5};
> +static unsigned long fsize = 0;
> +static char *base_dir = ".";
> +static char *ratio = "1";
> +
> +static bool use_fallocate = false;
> +static bool verbose = false;
> +
> +pthread_barrier_t bar;
> +
> +void handle_sigbus(int sig)
> +{
> +	pr_debug("Enospc test failed with SIGBUS\n");
> +	exit(7);
> +}
> +
> +void enospc_test(int id)
> +{
> +	int fd;
> +	char fpath[255] = {0};
> +	char *addr;
> +	unsigned long size = 0;
> +
> +	if (id % 2 == 0)
> +		size = fsize * file_ratio[0];
> +	else
> +		size = fsize * file_ratio[1];

What's the purpose of this ratio? Some comments would be good.

> +
> +	pthread_barrier_wait(&bar);
> +
> +	sprintf(fpath, "%s/mmap-file-%d", base_dir, id);
> +	pr_debug("Test write phase starting file %s fsize %lu, id %d\n", fpath, size, id);
> +
> +	signal(SIGBUS, handle_sigbus);
> +
> +	fd = open(fpath, O_RDWR | O_CREAT, 0644);
> +	if (fd < 0) {
> +		pr_debug("Open failed\n");
> +		exit(1);
> +	}
> +
> +	if (use_fallocate)
> +		assert(fallocate(fd, 0, 0, fsize) == 0);
                                           ^^^^^^ should be size?
> +	else
> +		assert(ftruncate(fd, size) == 0);
> +
> +	addr = mmap(NULL, size, PROT_WRITE, MAP_SHARED, fd, 0);
> +	assert(addr != MAP_FAILED);
> +
> +	for (int i = 0; i < size; i++) {
> +		addr[i] = 0xAB;
> +	}
> +
> +	assert(munmap(addr, size) != -1);
> +	close(fd);
> +	pr_debug("Test write phase completed...file %s, fsize %lu, id %d\n", fpath, size, id);
> +}
> +
> +void *spawn_test_thread(void *arg)
> +{
> +	struct thread_s *thread_info = (struct thread_s *)arg;
> +	pthread_t tid;
> +
> +	tid = pthread_self();
> +	pr_debug("Inside thread %lu %d\n", tid, thread_info->id);
> +	enospc_test(thread_info->id);
> +	return NULL;
> +}
> +
> +void _run_test(int threads)
> +{
> +	pthread_t tid[threads];
> +
> +	pthread_barrier_init(&bar, NULL, threads+1);
> +	for (int i = 0; i < threads; i++) {
> +		struct thread_s *thread_info = (struct thread_s *) malloc(sizeof(struct thread_s));
> +		thread_info->id = i;
> +		assert(pthread_create(&tid[i], NULL, spawn_test_thread, thread_info) == 0);
> +	}
> +
> +	pthread_barrier_wait(&bar);
> +
> +	for (int i = 0; i <threads; i++) {
> +		assert(pthread_join(tid[i], NULL) == 0);
> +	}
> +
> +	pthread_barrier_destroy(&bar);
> +	return;
> +}
> +
> +static void usage(void)
> +{
> +	printf("\nUsage: t_enospc [options]\n\n"
> +	       " -t                    thread count\n"
> +	       " -s size               file size\n"
> +	       " -p path               set base path\n"
> +	       " -f fallocate          use fallocate instead of ftruncate\n"
> +	       " -v verbose            print debug information\n"
> +	       " -r ratio              ratio of file sizes\n");

It'd good to describe the acceptable ratio format as well.

> +}
> +
> +int main(int argc, char *argv[])
> +{
> +	int opt;
> +	int threads = 0;
> +	char *ratio_ptr;
> +
> +	while ((opt = getopt(argc, argv, ":r:p:t:s:vf")) != -1) {
> +		switch(opt) {
> +		case 't':
> +			threads = atoi(optarg);
> +			pr_debug("Testing with (%d) threads\n", threads);
> +			break;
> +		case 's':
> +			fsize = atoi(optarg);
> +			pr_debug("size: %lu Bytes\n", fsize);
> +			break;
> +		case 'p':
> +			base_dir = optarg;
> +			break;
> +		case 'r':
> +			ratio = optarg;
> +			ratio_ptr = strtok(ratio, ",");
> +			if (ratio_ptr[0] == '1') {
> +				file_ratio[0] = 1;
> +				file_ratio[1] = 1;
> +				break;
> +			}
> +			if (ratio_ptr != NULL)
> +				file_ratio[0] = strtod(ratio_ptr, NULL);
> +			ratio_ptr = strtok(NULL, ",");
> +			if (ratio_ptr != NULL)
> +				file_ratio[1] = strtod(ratio_ptr, NULL);
> +			break;
> +		case 'f':
> +			use_fallocate = true;
> +			break;
> +		case 'v':
> +			verbose = true;
> +			break;
> +		case '?':
> +			usage();
> +			exit(1);
> +		}
> +	}
> +
> +	/* Sanity test of parameters */
> +	assert(threads);
> +	assert(fsize);
> +	assert(file_ratio[0]);
> +	assert(file_ratio[1]);
> +
> +	pr_debug("Testing with (%d) threads\n", threads);
> +	pr_debug("size: %lu Bytes\n", fsize);
> +
> +	_run_test(threads);
> +	return 0;
> +}
> diff --git a/tests/generic/618 b/tests/generic/618
> new file mode 100755
> index 00000000..57216b3d
> --- /dev/null
> +++ b/tests/generic/618
> @@ -0,0 +1,168 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2020 IBM Corporation. All Rights Reserved.
> +#
> +# FS QA Test 618

Add an empty line here.

> +# ENOSPC regression test in a multi-threaded scenario. Test allocation
> +# strategies of the file system and validate space anomalies as reported by
> +# the system versus the allocated by the program.
> +#
> +# With this we should be able to catch similar regressions as reported on
> +# ext4 on 5.7 kernel which was fixed by patch [1]
> +# [1]: https://patchwork.ozlabs.org/patch/1294003
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +FS_SIZE=$((240*1024*1024)) # 240MB
> +DEBUG=0 # set to 1 to enable debug statements in shell and c-prog

I think DEBUG could be on by default, and append all debug output to
$seqres.full

> +FACT=0.7
> +
> +# Disk allocation methods
> +FALLOCATE=1

This needs _require_xfs_io_command "falloc", so filesystem that doesn't
support fallocate(2) will _notrun.

> +FTRUNCATE=2
> +
> +# Helps to build TEST_VECTORS
> +SMALL_FILE_SIZE=$((512 * 1024)) # in Bytes
> +BIG_FILE_SIZE=$((1536 * 1024))  # in Bytes
> +MIX_FILE_SIZE=$((2048 * 1024))  # (BIG + SMALL small file size)
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_require_test

$TEST_DIR is not used, this could be skipped.

> +_require_scratch
> +_require_test_program "t_enospc"
> +
> +debug()
> +{
> +	if [ $DEBUG -eq 1 ]; then
> +		echo >&2 "func->${FUNCNAME[1]}: $1"
> +	fi
> +}
> +
> +# Calculate the number of threads needed to fill the disk space

Would you please describe the arguments in comments?

> +calc_thread_cnt()
> +{
> +	local file_ratio_unit=$1
> +	local file_ratio=$2
> +	local disk_saturation=$3
> +	local tot_avail_size
> +	local avail_size
> +	local thread_cnt
> +
> +	IFS=',' read -ra fratio <<< $file_ratio
> +	file_ratio_cnt=${#fratio[@]}
> +
> +	tot_avail_size=$(df --block-size=1 $SCRATCH_DEV | awk 'FNR == 2 { print $4 }')

Use $DF_PROG or _df_device instead of pure 'df', as they deal with long
device name correctly, which causes the output to be wrapped.

Other 'df' usages should be fixed as well.

> +	avail_size=$(echo $tot_avail_size*$disk_saturation | bc)

Use $BC_PROG instead of bc.

> +	thread_cnt=$(echo "$file_ratio_cnt*($avail_size/$file_ratio_unit)" | bc)
> +
> +	debug "Total available size: $tot_avail_size"
> +	debug "Available size: $avail_size"
> +	debug "Thread count: $thread_cnt"
> +
> +	echo ${thread_cnt}
> +}
> +
> +run_testcase()
> +{
> +	IFS=':' read -ra args <<< $1
> +	local test_name=${args[0]}
> +	local file_ratio_unit=${args[1]}
> +	local file_ratio=${args[2]}
> +	local disk_saturation=${args[3]}
> +	local disk_alloc_method=${args[4]}
> +	local test_iteration_cnt=${args[5]}

Describing the arguments would be good.

> +	local extra_args=""
> +	local thread_cnt
> +
> +	if [ "$disk_alloc_method" == "$FTRUNCATE" ]; then
                                       ^^^^^^^^^ should be FALLOCATE ?
'-f' means use fallocate in t_enospc.

> +		extra_args="$extra_args -f"
> +	fi
> +
> +	# enable the debug statements in c program
> +	if [ "$DEBUG" -eq 1 ]; then
> +		extra_args="$extra_args -v"
> +	fi
> +
> +	for i in $(eval echo "{1..$test_iteration_cnt}")
> +	do

fstests perfer for loop format as

	for ...; do
		<commands>
	done

> +		# Setup the device
> +		_scratch_mkfs_sized $FS_SIZE >> $seqres.full 2>&1
> +		_scratch_mount
> +
> +		thread_cnt=$(calc_thread_cnt $file_ratio_unit $file_ratio $disk_saturation)
> +
> +		debug "====== Test details starts ======"
> +		debug "Test name: $test_name"
> +		debug "File ratio unit: $file_ratio_unit"
> +		debug "File ratio: $file_ratio"
> +		debug "Disk saturation $disk_saturation"
> +		debug "Disk alloc method $disk_alloc_method"
> +		debug "Test iteration count: $test_iteration_cnt"
> +		debug "Extra arg: $extra_args"
> +		debug "Thread count: $thread_cnt"
> +		debug "============ end ==============="
> +
> +		# Start the test
> +		$here/src/t_enospc -t $thread_cnt -s $file_ratio_unit -r $file_ratio -p $SCRATCH_MNT $extra_args
> +
> +		status=$(echo $?)
> +		if [ $status -ne 0 ]; then
> +			use_per=$(df -h | grep $SCRATCH_MNT | awk '{print substr($5, 1, length($5)-1)}' | bc)
> +			alloc_per=$(echo "$FACT * 100" | bc)
                                          ^^^^^ should be $disk_saturation ?
> +			# We are here since t_nospc failed with an error code.
                                            ^^^^^^^ t_enospc
> +			# If the used filesystem space is still < available space - that means
> +			# the test failed due to FS wrongly reported ENOSPC.
> +			if [ $(echo "$use_per < $alloc_per" | bc) -ne 0 ]; then
> +				if [ $status -eq 134 ]; then
> +					echo "FAIL: Aborted assertion faliure"
> +				elif [ $status -eq 7 ]; then
> +					echo "FAIL: ENOSPC BUS faliure"
> +				fi

Please comment where 134 and 7 come from, I have to look at t_enospc.c
to know it returns 7 on SIGBUS.

> +				echo "$test_name failed at iteration count: $i"
> +				echo "$(df -h $SCRATCH_MNT)"
> +				echo "Allocated: $alloc_per% Used: $use_per%"
> +				exit
> +			fi
> +		fi
> +
> +		# Make space for other tests
> +		_scratch_unmount
> +	done
> +}
> +
> +declare -a TEST_VECTORS=(
> +# test-name:file-ratio-unit:file-ratio:disk-saturation:disk-alloc-method:test-iteration-cnt
> +"Small-file-test:$SMALL_FILE_SIZE:1:$FACT:$FALLOCATE:3"
> +"Big-file-test:$BIG_FILE_SIZE:1:$FACT:$FALLOCATE:3"
> +"Mix-file-test:$MIX_FILE_SIZE:0.75,0.25:$FACT:$FALLOCATE:3"

$FTRUNCATE is not tested?

> +)
> +
> +# real QA test starts here
> +for i in "${TEST_VECTORS[@]}"; do
> +	run_testcase $i
> +done
> +
> +echo "Silence is golden"
> +status=0
> +exit
> diff --git a/tests/generic/618.out b/tests/generic/618.out
> new file mode 100644
> index 00000000..8940b72f
> --- /dev/null
> +++ b/tests/generic/618.out
> @@ -0,0 +1,2 @@
> +QA output created by 618
> +Silence is golden
> diff --git a/tests/generic/group b/tests/generic/group
> index 94e860b8..dc668c06 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -620,3 +620,4 @@
>  615 auto rw
>  616 auto rw io_uring stress
>  617 auto rw io_uring stress
> +618 auto rw stress

Add ennospc group, and drop stress group.

Thanks,
Eryu

> -- 
> 2.28.0

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] generic: ENOSPC regression test in a multi-threaded scenario
  2020-11-29 11:43 ` Eryu Guan
@ 2020-12-01 11:27   ` Pratik Sampat
  0 siblings, 0 replies; 3+ messages in thread
From: Pratik Sampat @ 2020-12-01 11:27 UTC (permalink / raw)
  To: Eryu Guan; +Cc: fstests, linux-ext4, riteshh, sourabhjain, pratik.r.sampat

Thanks for the review.

I'll post out a version 2 addressing the comments below.

Thanks,
Pratik


On 29/11/20 5:13 pm, Eryu Guan wrote:
> On Fri, Nov 27, 2020 at 04:24:15PM +0530, Pratik Rajesh Sampat wrote:
>> Test allocation strategies of the file system and validate space
>> anomalies as reported by the system versus the allocated by the
>> program.
>>
>> The test is motivated by a bug in ext4 systems where-in ENOSPC is
>> reported by the file system even though enough space for allocations is
>> available[1].
>> [1]: https://patchwork.ozlabs.org/patch/1294003
> I see that the referenced patch has been upstreamed, Would you please
> reference the commit with commit id and title as well? So it's easier to
> know which commit fixed the bug.
>
>> Suggested-by: Ritesh Harjani <riteshh@linux.ibm.com>
>> Co-authored-by: Sourabh Jain <sourabhjain@linux.ibm.com>
>>
>> Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
>> Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
>> ---
>>   src/Makefile          |   2 +-
>>   src/t_enospc.c        | 186 ++++++++++++++++++++++++++++++++++++++++++
> Need an entry in .gitignore as well.
>
>>   tests/generic/618     | 168 ++++++++++++++++++++++++++++++++++++++
>>   tests/generic/618.out |   2 +
>>   tests/generic/group   |   1 +
>>   5 files changed, 358 insertions(+), 1 deletion(-)
>>   create mode 100644 src/t_enospc.c
>>   create mode 100755 tests/generic/618
>>   create mode 100644 tests/generic/618.out
>>
>> diff --git a/src/Makefile b/src/Makefile
>> index 919d77c4..32940142 100644
>> --- a/src/Makefile
>> +++ b/src/Makefile
>> @@ -17,7 +17,7 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
>>   	t_mmap_cow_race t_mmap_fallocate fsync-err t_mmap_write_ro \
>>   	t_ext4_dax_journal_corruption t_ext4_dax_inline_corruption \
>>   	t_ofd_locks t_mmap_collision mmap-write-concurrent \
>> -	t_get_file_time t_create_short_dirs t_create_long_dirs
>> +	t_get_file_time t_create_short_dirs t_create_long_dirs t_enospc
>>   
>>   LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
>>   	preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
>> diff --git a/src/t_enospc.c b/src/t_enospc.c
>> new file mode 100644
>> index 00000000..a0a8c783
>> --- /dev/null
>> +++ b/src/t_enospc.c
>> @@ -0,0 +1,186 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2020 IBM.
>> + * All Rights Reserved.
>> + *
>> + * simple mmap write multithreaded test
>> + */
>> +#include <stdio.h>
>> +#include <stdlib.h>
>> +#include <stdbool.h>
>> +#include <unistd.h>
>> +#include <fcntl.h>
>> +#include <string.h>
>> +#include <assert.h>
>> +#include <sys/mman.h>
>> +#include <pthread.h>
>> +#include <signal.h>
>> +
>> +#define pr_debug(fmt, ...) do { \
>> +    if (verbose) { \
>> +        printf (fmt, ##__VA_ARGS__); \
>> +    } \
>> +} while (0)
>> +
>> +struct thread_s {
>> +	int id;
>> +};
>> +
>> +static float file_ratio[2] = {0.5, 0.5};
>> +static unsigned long fsize = 0;
>> +static char *base_dir = ".";
>> +static char *ratio = "1";
>> +
>> +static bool use_fallocate = false;
>> +static bool verbose = false;
>> +
>> +pthread_barrier_t bar;
>> +
>> +void handle_sigbus(int sig)
>> +{
>> +	pr_debug("Enospc test failed with SIGBUS\n");
>> +	exit(7);
>> +}
>> +
>> +void enospc_test(int id)
>> +{
>> +	int fd;
>> +	char fpath[255] = {0};
>> +	char *addr;
>> +	unsigned long size = 0;
>> +
>> +	if (id % 2 == 0)
>> +		size = fsize * file_ratio[0];
>> +	else
>> +		size = fsize * file_ratio[1];
> What's the purpose of this ratio? Some comments would be good.
>
>> +
>> +	pthread_barrier_wait(&bar);
>> +
>> +	sprintf(fpath, "%s/mmap-file-%d", base_dir, id);
>> +	pr_debug("Test write phase starting file %s fsize %lu, id %d\n", fpath, size, id);
>> +
>> +	signal(SIGBUS, handle_sigbus);
>> +
>> +	fd = open(fpath, O_RDWR | O_CREAT, 0644);
>> +	if (fd < 0) {
>> +		pr_debug("Open failed\n");
>> +		exit(1);
>> +	}
>> +
>> +	if (use_fallocate)
>> +		assert(fallocate(fd, 0, 0, fsize) == 0);
>                                             ^^^^^^ should be size?
>> +	else
>> +		assert(ftruncate(fd, size) == 0);
>> +
>> +	addr = mmap(NULL, size, PROT_WRITE, MAP_SHARED, fd, 0);
>> +	assert(addr != MAP_FAILED);
>> +
>> +	for (int i = 0; i < size; i++) {
>> +		addr[i] = 0xAB;
>> +	}
>> +
>> +	assert(munmap(addr, size) != -1);
>> +	close(fd);
>> +	pr_debug("Test write phase completed...file %s, fsize %lu, id %d\n", fpath, size, id);
>> +}
>> +
>> +void *spawn_test_thread(void *arg)
>> +{
>> +	struct thread_s *thread_info = (struct thread_s *)arg;
>> +	pthread_t tid;
>> +
>> +	tid = pthread_self();
>> +	pr_debug("Inside thread %lu %d\n", tid, thread_info->id);
>> +	enospc_test(thread_info->id);
>> +	return NULL;
>> +}
>> +
>> +void _run_test(int threads)
>> +{
>> +	pthread_t tid[threads];
>> +
>> +	pthread_barrier_init(&bar, NULL, threads+1);
>> +	for (int i = 0; i < threads; i++) {
>> +		struct thread_s *thread_info = (struct thread_s *) malloc(sizeof(struct thread_s));
>> +		thread_info->id = i;
>> +		assert(pthread_create(&tid[i], NULL, spawn_test_thread, thread_info) == 0);
>> +	}
>> +
>> +	pthread_barrier_wait(&bar);
>> +
>> +	for (int i = 0; i <threads; i++) {
>> +		assert(pthread_join(tid[i], NULL) == 0);
>> +	}
>> +
>> +	pthread_barrier_destroy(&bar);
>> +	return;
>> +}
>> +
>> +static void usage(void)
>> +{
>> +	printf("\nUsage: t_enospc [options]\n\n"
>> +	       " -t                    thread count\n"
>> +	       " -s size               file size\n"
>> +	       " -p path               set base path\n"
>> +	       " -f fallocate          use fallocate instead of ftruncate\n"
>> +	       " -v verbose            print debug information\n"
>> +	       " -r ratio              ratio of file sizes\n");
> It'd good to describe the acceptable ratio format as well.
>
>> +}
>> +
>> +int main(int argc, char *argv[])
>> +{
>> +	int opt;
>> +	int threads = 0;
>> +	char *ratio_ptr;
>> +
>> +	while ((opt = getopt(argc, argv, ":r:p:t:s:vf")) != -1) {
>> +		switch(opt) {
>> +		case 't':
>> +			threads = atoi(optarg);
>> +			pr_debug("Testing with (%d) threads\n", threads);
>> +			break;
>> +		case 's':
>> +			fsize = atoi(optarg);
>> +			pr_debug("size: %lu Bytes\n", fsize);
>> +			break;
>> +		case 'p':
>> +			base_dir = optarg;
>> +			break;
>> +		case 'r':
>> +			ratio = optarg;
>> +			ratio_ptr = strtok(ratio, ",");
>> +			if (ratio_ptr[0] == '1') {
>> +				file_ratio[0] = 1;
>> +				file_ratio[1] = 1;
>> +				break;
>> +			}
>> +			if (ratio_ptr != NULL)
>> +				file_ratio[0] = strtod(ratio_ptr, NULL);
>> +			ratio_ptr = strtok(NULL, ",");
>> +			if (ratio_ptr != NULL)
>> +				file_ratio[1] = strtod(ratio_ptr, NULL);
>> +			break;
>> +		case 'f':
>> +			use_fallocate = true;
>> +			break;
>> +		case 'v':
>> +			verbose = true;
>> +			break;
>> +		case '?':
>> +			usage();
>> +			exit(1);
>> +		}
>> +	}
>> +
>> +	/* Sanity test of parameters */
>> +	assert(threads);
>> +	assert(fsize);
>> +	assert(file_ratio[0]);
>> +	assert(file_ratio[1]);
>> +
>> +	pr_debug("Testing with (%d) threads\n", threads);
>> +	pr_debug("size: %lu Bytes\n", fsize);
>> +
>> +	_run_test(threads);
>> +	return 0;
>> +}
>> diff --git a/tests/generic/618 b/tests/generic/618
>> new file mode 100755
>> index 00000000..57216b3d
>> --- /dev/null
>> +++ b/tests/generic/618
>> @@ -0,0 +1,168 @@
>> +#! /bin/bash
>> +# SPDX-License-Identifier: GPL-2.0
>> +# Copyright (c) 2020 IBM Corporation. All Rights Reserved.
>> +#
>> +# FS QA Test 618
> Add an empty line here.
>
>> +# ENOSPC regression test in a multi-threaded scenario. Test allocation
>> +# strategies of the file system and validate space anomalies as reported by
>> +# the system versus the allocated by the program.
>> +#
>> +# With this we should be able to catch similar regressions as reported on
>> +# ext4 on 5.7 kernel which was fixed by patch [1]
>> +# [1]: https://patchwork.ozlabs.org/patch/1294003
>> +#
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +here=`pwd`
>> +tmp=/tmp/$$
>> +status=1	# failure is the default!
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +FS_SIZE=$((240*1024*1024)) # 240MB
>> +DEBUG=0 # set to 1 to enable debug statements in shell and c-prog
> I think DEBUG could be on by default, and append all debug output to
> $seqres.full
>
>> +FACT=0.7
>> +
>> +# Disk allocation methods
>> +FALLOCATE=1
> This needs _require_xfs_io_command "falloc", so filesystem that doesn't
> support fallocate(2) will _notrun.
>
>> +FTRUNCATE=2
>> +
>> +# Helps to build TEST_VECTORS
>> +SMALL_FILE_SIZE=$((512 * 1024)) # in Bytes
>> +BIG_FILE_SIZE=$((1536 * 1024))  # in Bytes
>> +MIX_FILE_SIZE=$((2048 * 1024))  # (BIG + SMALL small file size)
>> +
>> +_cleanup()
>> +{
>> +	cd /
>> +	rm -f $tmp.*
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common/rc
>> +. ./common/filter
>> +
>> +# remove previous $seqres.full before test
>> +rm -f $seqres.full
>> +
>> +# Modify as appropriate.
>> +_supported_fs generic
>> +_require_test
> $TEST_DIR is not used, this could be skipped.
>
>> +_require_scratch
>> +_require_test_program "t_enospc"
>> +
>> +debug()
>> +{
>> +	if [ $DEBUG -eq 1 ]; then
>> +		echo >&2 "func->${FUNCNAME[1]}: $1"
>> +	fi
>> +}
>> +
>> +# Calculate the number of threads needed to fill the disk space
> Would you please describe the arguments in comments?
>
>> +calc_thread_cnt()
>> +{
>> +	local file_ratio_unit=$1
>> +	local file_ratio=$2
>> +	local disk_saturation=$3
>> +	local tot_avail_size
>> +	local avail_size
>> +	local thread_cnt
>> +
>> +	IFS=',' read -ra fratio <<< $file_ratio
>> +	file_ratio_cnt=${#fratio[@]}
>> +
>> +	tot_avail_size=$(df --block-size=1 $SCRATCH_DEV | awk 'FNR == 2 { print $4 }')
> Use $DF_PROG or _df_device instead of pure 'df', as they deal with long
> device name correctly, which causes the output to be wrapped.
>
> Other 'df' usages should be fixed as well.
>
>> +	avail_size=$(echo $tot_avail_size*$disk_saturation | bc)
> Use $BC_PROG instead of bc.
>
>> +	thread_cnt=$(echo "$file_ratio_cnt*($avail_size/$file_ratio_unit)" | bc)
>> +
>> +	debug "Total available size: $tot_avail_size"
>> +	debug "Available size: $avail_size"
>> +	debug "Thread count: $thread_cnt"
>> +
>> +	echo ${thread_cnt}
>> +}
>> +
>> +run_testcase()
>> +{
>> +	IFS=':' read -ra args <<< $1
>> +	local test_name=${args[0]}
>> +	local file_ratio_unit=${args[1]}
>> +	local file_ratio=${args[2]}
>> +	local disk_saturation=${args[3]}
>> +	local disk_alloc_method=${args[4]}
>> +	local test_iteration_cnt=${args[5]}
> Describing the arguments would be good.
>
>> +	local extra_args=""
>> +	local thread_cnt
>> +
>> +	if [ "$disk_alloc_method" == "$FTRUNCATE" ]; then
>                                         ^^^^^^^^^ should be FALLOCATE ?
> '-f' means use fallocate in t_enospc.
>
>> +		extra_args="$extra_args -f"
>> +	fi
>> +
>> +	# enable the debug statements in c program
>> +	if [ "$DEBUG" -eq 1 ]; then
>> +		extra_args="$extra_args -v"
>> +	fi
>> +
>> +	for i in $(eval echo "{1..$test_iteration_cnt}")
>> +	do
> fstests perfer for loop format as
>
> 	for ...; do
> 		<commands>
> 	done
>
>> +		# Setup the device
>> +		_scratch_mkfs_sized $FS_SIZE >> $seqres.full 2>&1
>> +		_scratch_mount
>> +
>> +		thread_cnt=$(calc_thread_cnt $file_ratio_unit $file_ratio $disk_saturation)
>> +
>> +		debug "====== Test details starts ======"
>> +		debug "Test name: $test_name"
>> +		debug "File ratio unit: $file_ratio_unit"
>> +		debug "File ratio: $file_ratio"
>> +		debug "Disk saturation $disk_saturation"
>> +		debug "Disk alloc method $disk_alloc_method"
>> +		debug "Test iteration count: $test_iteration_cnt"
>> +		debug "Extra arg: $extra_args"
>> +		debug "Thread count: $thread_cnt"
>> +		debug "============ end ==============="
>> +
>> +		# Start the test
>> +		$here/src/t_enospc -t $thread_cnt -s $file_ratio_unit -r $file_ratio -p $SCRATCH_MNT $extra_args
>> +
>> +		status=$(echo $?)
>> +		if [ $status -ne 0 ]; then
>> +			use_per=$(df -h | grep $SCRATCH_MNT | awk '{print substr($5, 1, length($5)-1)}' | bc)
>> +			alloc_per=$(echo "$FACT * 100" | bc)
>                                            ^^^^^ should be $disk_saturation ?
>> +			# We are here since t_nospc failed with an error code.
>                                              ^^^^^^^ t_enospc
>> +			# If the used filesystem space is still < available space - that means
>> +			# the test failed due to FS wrongly reported ENOSPC.
>> +			if [ $(echo "$use_per < $alloc_per" | bc) -ne 0 ]; then
>> +				if [ $status -eq 134 ]; then
>> +					echo "FAIL: Aborted assertion faliure"
>> +				elif [ $status -eq 7 ]; then
>> +					echo "FAIL: ENOSPC BUS faliure"
>> +				fi
> Please comment where 134 and 7 come from, I have to look at t_enospc.c
> to know it returns 7 on SIGBUS.
>
>> +				echo "$test_name failed at iteration count: $i"
>> +				echo "$(df -h $SCRATCH_MNT)"
>> +				echo "Allocated: $alloc_per% Used: $use_per%"
>> +				exit
>> +			fi
>> +		fi
>> +
>> +		# Make space for other tests
>> +		_scratch_unmount
>> +	done
>> +}
>> +
>> +declare -a TEST_VECTORS=(
>> +# test-name:file-ratio-unit:file-ratio:disk-saturation:disk-alloc-method:test-iteration-cnt
>> +"Small-file-test:$SMALL_FILE_SIZE:1:$FACT:$FALLOCATE:3"
>> +"Big-file-test:$BIG_FILE_SIZE:1:$FACT:$FALLOCATE:3"
>> +"Mix-file-test:$MIX_FILE_SIZE:0.75,0.25:$FACT:$FALLOCATE:3"
> $FTRUNCATE is not tested?
>
>> +)
>> +
>> +# real QA test starts here
>> +for i in "${TEST_VECTORS[@]}"; do
>> +	run_testcase $i
>> +done
>> +
>> +echo "Silence is golden"
>> +status=0
>> +exit
>> diff --git a/tests/generic/618.out b/tests/generic/618.out
>> new file mode 100644
>> index 00000000..8940b72f
>> --- /dev/null
>> +++ b/tests/generic/618.out
>> @@ -0,0 +1,2 @@
>> +QA output created by 618
>> +Silence is golden
>> diff --git a/tests/generic/group b/tests/generic/group
>> index 94e860b8..dc668c06 100644
>> --- a/tests/generic/group
>> +++ b/tests/generic/group
>> @@ -620,3 +620,4 @@
>>   615 auto rw
>>   616 auto rw io_uring stress
>>   617 auto rw io_uring stress
>> +618 auto rw stress
> Add ennospc group, and drop stress group.
>
> Thanks,
> Eryu
>
>> -- 
>> 2.28.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-12-01 11:28 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-27 10:54 [PATCH] generic: ENOSPC regression test in a multi-threaded scenario Pratik Rajesh Sampat
2020-11-29 11:43 ` Eryu Guan
2020-12-01 11:27   ` Pratik Sampat

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).