Linux-f2fs-devel Archive on lore.kernel.org
 help / color / Atom feed
From: Satya Tangirala via Linux-f2fs-devel <linux-f2fs-devel@lists.sourceforge.net>
To: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org,
	 linux-fscrypt@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	 linux-f2fs-devel@lists.sourceforge.net,
	linux-ext4@vger.kernel.org
Cc: Kuohong Wang <kuohong.wang@mediatek.com>,
	Satya Tangirala <satyat@google.com>,
	Barani Muthukumaran <bmuthuku@qti.qualcomm.com>,
	Kim Boojin <boojin.kim@samsung.com>
Subject: [f2fs-dev] [PATCH v9 07/11] scsi: ufs: Add inline encryption support to UFS
Date: Wed, 25 Mar 2020 20:06:58 -0700
Message-ID: <20200326030702.223233-8-satyat@google.com> (raw)
In-Reply-To: <20200326030702.223233-1-satyat@google.com>

Wire up ufshcd.c with the UFS Crypto API, the block layer inline
encryption additions and the keyslot manager.

Signed-off-by: Satya Tangirala <satyat@google.com>
---
 drivers/scsi/ufs/ufshcd-crypto.h | 18 +++++++++++++
 drivers/scsi/ufs/ufshcd.c        | 44 ++++++++++++++++++++++++++++----
 drivers/scsi/ufs/ufshcd.h        |  6 +++++
 3 files changed, 63 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd-crypto.h b/drivers/scsi/ufs/ufshcd-crypto.h
index 1e98f1fc99965..707e7b77e16fc 100644
--- a/drivers/scsi/ufs/ufshcd-crypto.h
+++ b/drivers/scsi/ufs/ufshcd-crypto.h
@@ -10,6 +10,20 @@
 #include "ufshcd.h"
 #include "ufshci.h"
 
+static inline void ufshcd_prepare_lrbp_crypto(struct ufs_hba *hba,
+					      struct scsi_cmnd *cmd,
+					      struct ufshcd_lrb *lrbp)
+{
+	struct request *rq = cmd->request;
+
+	if (rq->crypt_keyslot) {
+		lrbp->crypto_key_slot = blk_ksm_get_slot_idx(rq->crypt_keyslot);
+		lrbp->data_unit_num = rq->crypt_ctx->bc_dun[0];
+	} else {
+		lrbp->crypto_key_slot = -1;
+	}
+}
+
 bool ufshcd_crypto_enable(struct ufs_hba *hba);
 
 void ufshcd_crypto_disable(struct ufs_hba *hba);
@@ -23,6 +37,10 @@ void ufshcd_crypto_destroy_keyslot_manager(struct ufs_hba *hba);
 
 #else /* CONFIG_SCSI_UFS_CRYPTO */
 
+static inline void ufshcd_prepare_lrbp_crypto(struct ufs_hba *hba,
+					      struct scsi_cmnd *cmd,
+					      struct ufshcd_lrb *lrbp) { }
+
 static inline bool ufshcd_crypto_enable(struct ufs_hba *hba)
 {
 	return false;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index a9c2ae9984ad7..71b3d1fb4e47c 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -47,6 +47,7 @@
 #include "unipro.h"
 #include "ufs-sysfs.h"
 #include "ufs_bsg.h"
+#include "ufshcd-crypto.h"
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/ufs.h>
@@ -816,7 +817,12 @@ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
  */
 static inline void ufshcd_hba_start(struct ufs_hba *hba)
 {
-	ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE);
+	u32 val = CONTROLLER_ENABLE;
+
+	if (ufshcd_crypto_enable(hba))
+		val |= CRYPTO_GENERAL_ENABLE;
+
+	ufshcd_writel(hba, val, REG_CONTROLLER_ENABLE);
 }
 
 /**
@@ -2174,6 +2180,8 @@ static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
 	struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr;
 	u32 data_direction;
 	u32 dword_0;
+	u32 dword_1 = 0;
+	u32 dword_3 = 0;
 
 	if (cmd_dir == DMA_FROM_DEVICE) {
 		data_direction = UTP_DEVICE_TO_HOST;
@@ -2192,9 +2200,17 @@ static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
 		dword_0 |= UTP_REQ_DESC_INT_CMD;
 
 	/* Transfer request descriptor header fields */
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+	if (lrbp->crypto_key_slot >= 0) {
+		dword_0 |= UTP_REQ_DESC_CRYPTO_ENABLE_CMD;
+		dword_0 |= lrbp->crypto_key_slot;
+		dword_1 = lower_32_bits(lrbp->data_unit_num);
+		dword_3 = upper_32_bits(lrbp->data_unit_num);
+	}
+#endif /* CONFIG_SCSI_UFS_CRYPTO */
+
 	req_desc->header.dword_0 = cpu_to_le32(dword_0);
-	/* dword_1 is reserved, hence it is set to 0 */
-	req_desc->header.dword_1 = 0;
+	req_desc->header.dword_1 = cpu_to_le32(dword_1);
 	/*
 	 * assigning invalid value for command status. Controller
 	 * updates OCS on command completion, with the command
@@ -2202,8 +2218,7 @@ static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
 	 */
 	req_desc->header.dword_2 =
 		cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
-	/* dword_3 is reserved, hence it is set to 0 */
-	req_desc->header.dword_3 = 0;
+	req_desc->header.dword_3 = cpu_to_le32(dword_3);
 
 	req_desc->prd_table_length = 0;
 }
@@ -2437,6 +2452,9 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	lrbp->task_tag = tag;
 	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
 	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
+
+	ufshcd_prepare_lrbp_crypto(hba, cmd, lrbp);
+
 	lrbp->req_abort_skip = false;
 
 	ufshcd_comp_scsi_upiu(hba, lrbp);
@@ -2470,6 +2488,9 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
 	lrbp->task_tag = tag;
 	lrbp->lun = 0; /* device management cmd is not specific to any LUN */
 	lrbp->intr_cmd = true; /* No interrupt aggregation */
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+	lrbp->crypto_key_slot = -1; /* No crypto operations */
+#endif
 	hba->dev_cmd.type = cmd_type;
 
 	return ufshcd_comp_devman_upiu(hba, lrbp);
@@ -4631,6 +4652,8 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
 	if (ufshcd_is_rpm_autosuspend_allowed(hba))
 		sdev->rpm_autosuspend = 1;
 
+	ufshcd_crypto_setup_rq_keyslot_manager(hba, q);
+
 	return 0;
 }
 
@@ -5897,6 +5920,9 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 	lrbp->task_tag = tag;
 	lrbp->lun = 0;
 	lrbp->intr_cmd = true;
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+	lrbp->crypto_key_slot = -1; /* No crypto operations */
+#endif
 	hba->dev_cmd.type = cmd_type;
 
 	switch (hba->ufs_version) {
@@ -8311,6 +8337,7 @@ EXPORT_SYMBOL_GPL(ufshcd_remove);
  */
 void ufshcd_dealloc_host(struct ufs_hba *hba)
 {
+	ufshcd_crypto_destroy_keyslot_manager(hba);
 	scsi_host_put(hba->host);
 }
 EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
@@ -8520,6 +8547,13 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	/* Reset the attached device */
 	ufshcd_vops_device_reset(hba);
 
+	/* Init crypto */
+	err = ufshcd_hba_init_crypto(hba);
+	if (err) {
+		dev_err(hba->dev, "crypto setup failed\n");
+		goto out_remove_scsi_host;
+	}
+
 	/* Host controller enable */
 	err = ufshcd_hba_enable(hba);
 	if (err) {
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index eaeb21b9cda24..3af15880e1e36 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -168,6 +168,8 @@ struct ufs_pm_lvl_states {
  * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
  * @issue_time_stamp: time stamp for debug purposes
  * @compl_time_stamp: time stamp for statistics
+ * @crypto_key_slot: the key slot to use for inline crypto
+ * @data_unit_num: the data unit number for the first block for inline crypto
  * @req_abort_skip: skip request abort task flag
  */
 struct ufshcd_lrb {
@@ -192,6 +194,10 @@ struct ufshcd_lrb {
 	bool intr_cmd;
 	ktime_t issue_time_stamp;
 	ktime_t compl_time_stamp;
+#if IS_ENABLED(CONFIG_SCSI_UFS_CRYPTO)
+	int crypto_key_slot;
+	u64 data_unit_num;
+#endif
 
 	bool req_abort_skip;
 };
-- 
2.25.1.696.g5e7596f4ac-goog



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

  parent reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-26  3:06 [f2fs-dev] [PATCH v9 00/11] Inline Encryption Support Satya Tangirala via Linux-f2fs-devel
2020-03-26  3:06 ` [f2fs-dev] [PATCH v9 01/11] block: Keyslot Manager for Inline Encryption Satya Tangirala via Linux-f2fs-devel
2020-03-26  6:22   ` Eric Biggers
2020-03-27 17:00     ` Christoph Hellwig
2020-03-26  3:06 ` [f2fs-dev] [PATCH v9 02/11] block: Inline encryption support for blk-mq Satya Tangirala via Linux-f2fs-devel
2020-03-26 20:05   ` Eric Biggers
2020-03-27 17:05     ` Christoph Hellwig
2020-03-26  3:06 ` [f2fs-dev] [PATCH v9 03/11] block: Make blk-integrity preclude hardware inline encryption Satya Tangirala via Linux-f2fs-devel
2020-03-26  3:06 ` [f2fs-dev] [PATCH v9 04/11] block: blk-crypto-fallback for Inline Encryption Satya Tangirala via Linux-f2fs-devel
2020-03-26 20:28   ` Eric Biggers
2020-03-26  3:06 ` [f2fs-dev] [PATCH v9 05/11] scsi: ufs: UFS driver v2.1 spec crypto additions Satya Tangirala via Linux-f2fs-devel
2020-03-26  3:06 ` [f2fs-dev] [PATCH v9 06/11] scsi: ufs: UFS crypto API Satya Tangirala via Linux-f2fs-devel
2020-03-26  5:07   ` Eric Biggers
2020-03-26  3:06 ` Satya Tangirala via Linux-f2fs-devel [this message]
2020-03-26  5:09   ` [f2fs-dev] [PATCH v9 07/11] scsi: ufs: Add inline encryption support to UFS Eric Biggers
2020-03-26  3:06 ` [f2fs-dev] [PATCH v9 08/11] fs: introduce SB_INLINECRYPT Satya Tangirala via Linux-f2fs-devel
2020-03-26  5:56   ` Eric Biggers
2020-03-26  3:07 ` [f2fs-dev] [PATCH v9 09/11] fscrypt: add inline encryption support Satya Tangirala via Linux-f2fs-devel
2020-03-26  5:45   ` Eric Biggers
2020-03-26  3:07 ` [f2fs-dev] [PATCH v9 10/11] f2fs: " Satya Tangirala via Linux-f2fs-devel
2020-03-26  3:07 ` [f2fs-dev] [PATCH v9 11/11] ext4: " Satya Tangirala via Linux-f2fs-devel
2020-03-26  3:32 ` [f2fs-dev] [PATCH v9 00/11] Inline Encryption Support Eric Biggers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200326030702.223233-8-satyat@google.com \
    --to=linux-f2fs-devel@lists.sourceforge.net \
    --cc=bmuthuku@qti.qualcomm.com \
    --cc=boojin.kim@samsung.com \
    --cc=kuohong.wang@mediatek.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fscrypt@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=satyat@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-f2fs-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-f2fs-devel/0 linux-f2fs-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-f2fs-devel linux-f2fs-devel/ https://lore.kernel.org/linux-f2fs-devel \
		linux-f2fs-devel@lists.sourceforge.net
	public-inbox-index linux-f2fs-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/net.sourceforge.lists.linux-f2fs-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git