* [PATCH] video/fbdev/core: Mark debug-only variable as __maybe_unused
@ 2020-10-21 12:15 Thomas Zimmermann
2020-11-01 9:47 ` Sam Ravnborg
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Zimmermann @ 2020-10-21 12:15 UTC (permalink / raw)
To: gregkh, daniel.vetter, b.zolnierkie, jirislaby, gustavoars, peda,
jingxiangfeng, natechancellor, george.kennedy, yepeilin.cs
Cc: dri-devel, linux-fbdev, Thomas Zimmermann
Compiling fbcon.c gives
../drivers/video/fbdev/core/fbcon.c: In function 'fbcon_exit':
../drivers/video/fbdev/core/fbcon.c:3358:7: warning: variable 'pending' set but not used [-Wunused-but-set-variable]
3358 | int pending = 0;
| ^~~~~~~
The variable pending is only used for fbcon debugging. It's unused
otherwise. Mark it accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
drivers/video/fbdev/core/fbcon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index d03f62369734..aca1512b6e86 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -3355,7 +3355,7 @@ static void fbcon_exit(void)
#endif
for_each_registered_fb(i) {
- int pending = 0;
+ int __maybe_unused pending = 0;
mapped = 0;
info = registered_fb[i];
--
2.28.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] video/fbdev/core: Mark debug-only variable as __maybe_unused
2020-10-21 12:15 [PATCH] video/fbdev/core: Mark debug-only variable as __maybe_unused Thomas Zimmermann
@ 2020-11-01 9:47 ` Sam Ravnborg
2020-11-01 10:09 ` Peilin Ye
2020-11-01 14:49 ` [PATCH] fbcon: Replace printk() with pr_*() Peilin Ye
0 siblings, 2 replies; 6+ messages in thread
From: Sam Ravnborg @ 2020-11-01 9:47 UTC (permalink / raw)
To: Thomas Zimmermann
Cc: gregkh, daniel.vetter, b.zolnierkie, jirislaby, gustavoars, peda,
jingxiangfeng, natechancellor, george.kennedy, yepeilin.cs,
linux-fbdev, dri-devel
Hi Thomas.
On Wed, Oct 21, 2020 at 02:15:12PM +0200, Thomas Zimmermann wrote:
> Compiling fbcon.c gives
>
> ../drivers/video/fbdev/core/fbcon.c: In function 'fbcon_exit':
> ../drivers/video/fbdev/core/fbcon.c:3358:7: warning: variable 'pending' set but not used [-Wunused-but-set-variable]
> 3358 | int pending = 0;
> | ^~~~~~~
>
> The variable pending is only used for fbcon debugging. It's unused
> otherwise. Mark it accordingly.
>
> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
A better fix would be to replace the few uses of DPRINTK() with
pr_dbg(). pr_info() is alread in use.
ofc, the next step would be to replace all prink() with their pr_
counterparts.
Peilin, maybe this is one for your nice cleanups in fbcon?
Sam
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] video/fbdev/core: Mark debug-only variable as __maybe_unused
2020-11-01 9:47 ` Sam Ravnborg
@ 2020-11-01 10:09 ` Peilin Ye
2020-11-01 14:49 ` [PATCH] fbcon: Replace printk() with pr_*() Peilin Ye
1 sibling, 0 replies; 6+ messages in thread
From: Peilin Ye @ 2020-11-01 10:09 UTC (permalink / raw)
To: Sam Ravnborg
Cc: Thomas Zimmermann, gregkh, daniel.vetter, b.zolnierkie,
jirislaby, gustavoars, peda, jingxiangfeng, natechancellor,
george.kennedy, yepeilin.cs, linux-fbdev, dri-devel
Hi Sam,
On Sun, Nov 01, 2020 at 10:47:18AM +0100, Sam Ravnborg wrote:
> Hi Thomas.
>
> On Wed, Oct 21, 2020 at 02:15:12PM +0200, Thomas Zimmermann wrote:
> > Compiling fbcon.c gives
> >
> > ../drivers/video/fbdev/core/fbcon.c: In function 'fbcon_exit':
> > ../drivers/video/fbdev/core/fbcon.c:3358:7: warning: variable 'pending' set but not used [-Wunused-but-set-variable]
> > 3358 | int pending = 0;
> > | ^~~~~~~
> >
> > The variable pending is only used for fbcon debugging. It's unused
> > otherwise. Mark it accordingly.
> >
> > Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
>
> A better fix would be to replace the few uses of DPRINTK() with
> pr_dbg(). pr_info() is alread in use.
>
> ofc, the next step would be to replace all prink() with their pr_
> counterparts.
>
> Peilin, maybe this is one for your nice cleanups in fbcon?
Sure, I will send a patch replacing all printk() except DPRINTK(). Thank
you for the suggestion!
Peilin
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] fbcon: Replace printk() with pr_*()
2020-11-01 9:47 ` Sam Ravnborg
2020-11-01 10:09 ` Peilin Ye
@ 2020-11-01 14:49 ` Peilin Ye
2020-11-01 15:41 ` Greg Kroah-Hartman
1 sibling, 1 reply; 6+ messages in thread
From: Peilin Ye @ 2020-11-01 14:49 UTC (permalink / raw)
To: Daniel Vetter
Cc: Sam Ravnborg, Thomas Zimmermann, Greg Kroah-Hartman,
Bartlomiej Zolnierkiewicz, Jiri Slaby, dri-devel, linux-fbdev,
linux-kernel, Peilin Ye
Replace printk() with pr_err(), pr_warn() and pr_info(). Do not split long
strings, for easier grepping. Use `__func__` whenever applicable.
fbcon_prepare_logo() has more than one callers, use "fbcon_prepare_logo:"
instead of "fbcon_init:", for less confusion.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
---
drivers/video/fbdev/core/fbcon.c | 42 +++++++++++++-------------------
1 file changed, 17 insertions(+), 25 deletions(-)
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index cef437817b0d..a3e87ab0e523 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -659,8 +659,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
if (logo_lines > vc->vc_bottom) {
logo_shown = FBCON_LOGO_CANSHOW;
- printk(KERN_INFO
- "fbcon_init: disable boot-logo (boot-logo bigger than screen).\n");
+ pr_info("%s: disable boot-logo (boot-logo bigger than screen).\n", __func__);
} else {
logo_shown = FBCON_LOGO_DRAW;
vc->vc_top = logo_lines;
@@ -785,9 +784,8 @@ static int con2fb_release_oldinfo(struct vc_data *vc, struct fb_info *oldinfo,
ret = newinfo->fbops->fb_set_par(newinfo);
if (ret)
- printk(KERN_ERR "con2fb_release_oldinfo: "
- "detected unhandled fb_set_par error, "
- "error code %d\n", ret);
+ pr_err("%s: detected unhandled fb_set_par error, error code %d\n",
+ __func__, ret);
}
}
@@ -806,9 +804,8 @@ static void con2fb_init_display(struct vc_data *vc, struct fb_info *info,
ret = info->fbops->fb_set_par(info);
if (ret)
- printk(KERN_ERR "con2fb_init_display: detected "
- "unhandled fb_set_par error, "
- "error code %d\n", ret);
+ pr_err("%s: detected unhandled fb_set_par error, error code %d\n",
+ __func__, ret);
}
ops->flags |= FBCON_FLAGS_INIT;
@@ -1137,9 +1134,8 @@ static void fbcon_init(struct vc_data *vc, int init)
ret = info->fbops->fb_set_par(info);
if (ret)
- printk(KERN_ERR "fbcon_init: detected "
- "unhandled fb_set_par error, "
- "error code %d\n", ret);
+ pr_err("%s: detected unhandled fb_set_par error, error code %d\n",
+ __func__, ret);
}
ops->flags |= FBCON_FLAGS_INIT;
@@ -2126,9 +2122,8 @@ static int fbcon_switch(struct vc_data *vc)
ret = info->fbops->fb_set_par(info);
if (ret)
- printk(KERN_ERR "fbcon_switch: detected "
- "unhandled fb_set_par error, "
- "error code %d\n", ret);
+ pr_err("%s: detected unhandled fb_set_par error, error code %d\n",
+ __func__, ret);
}
if (old_info != info)
@@ -2899,9 +2894,8 @@ void fbcon_remap_all(struct fb_info *info)
set_con2fb_map(i, idx, 0);
if (con_is_bound(&fb_con)) {
- printk(KERN_INFO "fbcon: Remapping primary device, "
- "fb%i, to tty %i-%i\n", idx,
- first_fb_vc + 1, last_fb_vc + 1);
+ pr_info("fbcon: Remapping primary device, fb%i, to tty %i-%i\n",
+ idx, first_fb_vc + 1, last_fb_vc + 1);
info_idx = idx;
}
console_unlock();
@@ -2914,17 +2908,16 @@ static void fbcon_select_primary(struct fb_info *info)
fb_is_primary_device(info)) {
int i;
- printk(KERN_INFO "fbcon: %s (fb%i) is primary device\n",
- info->fix.id, info->node);
+ pr_info("fbcon: %s (fb%i) is primary device\n",
+ info->fix.id, info->node);
primary_device = info->node;
for (i = first_fb_vc; i <= last_fb_vc; i++)
con2fb_map_boot[i] = primary_device;
if (con_is_bound(&fb_con)) {
- printk(KERN_INFO "fbcon: Remapping primary device, "
- "fb%i, to tty %i-%i\n", info->node,
- first_fb_vc + 1, last_fb_vc + 1);
+ pr_info("fbcon: Remapping primary device, fb%i, to tty %i-%i\n",
+ info->node, first_fb_vc + 1, last_fb_vc + 1);
info_idx = primary_device;
}
}
@@ -3394,9 +3387,8 @@ void __init fb_console_init(void)
"fbcon");
if (IS_ERR(fbcon_device)) {
- printk(KERN_WARNING "Unable to create device "
- "for fbcon; errno = %ld\n",
- PTR_ERR(fbcon_device));
+ pr_warn("Unable to create device for fbcon; errno = %ld\n",
+ PTR_ERR(fbcon_device));
fbcon_device = NULL;
} else
fbcon_init_device();
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] fbcon: Replace printk() with pr_*()
2020-11-01 14:49 ` [PATCH] fbcon: Replace printk() with pr_*() Peilin Ye
@ 2020-11-01 15:41 ` Greg Kroah-Hartman
2020-11-01 16:08 ` Peilin Ye
0 siblings, 1 reply; 6+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-01 15:41 UTC (permalink / raw)
To: Peilin Ye
Cc: Daniel Vetter, Sam Ravnborg, Thomas Zimmermann,
Bartlomiej Zolnierkiewicz, Jiri Slaby, dri-devel, linux-fbdev,
linux-kernel
On Sun, Nov 01, 2020 at 09:49:04AM -0500, Peilin Ye wrote:
> Replace printk() with pr_err(), pr_warn() and pr_info(). Do not split long
> strings, for easier grepping. Use `__func__` whenever applicable.
>
> fbcon_prepare_logo() has more than one callers, use "fbcon_prepare_logo:"
> instead of "fbcon_init:", for less confusion.
>
> Suggested-by: Sam Ravnborg <sam@ravnborg.org>
> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
> ---
> drivers/video/fbdev/core/fbcon.c | 42 +++++++++++++-------------------
> 1 file changed, 17 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
> index cef437817b0d..a3e87ab0e523 100644
> --- a/drivers/video/fbdev/core/fbcon.c
> +++ b/drivers/video/fbdev/core/fbcon.c
> @@ -659,8 +659,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
>
> if (logo_lines > vc->vc_bottom) {
> logo_shown = FBCON_LOGO_CANSHOW;
> - printk(KERN_INFO
> - "fbcon_init: disable boot-logo (boot-logo bigger than screen).\n");
> + pr_info("%s: disable boot-logo (boot-logo bigger than screen).\n", __func__);
Shouldn't this be:
dev_info(info->dev, "...");
instead?
It's a driver, and you have access to the struct device that is being
worked on, so always try to use the dev_* versions of these calls
instead when ever possible.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] fbcon: Replace printk() with pr_*()
2020-11-01 15:41 ` Greg Kroah-Hartman
@ 2020-11-01 16:08 ` Peilin Ye
0 siblings, 0 replies; 6+ messages in thread
From: Peilin Ye @ 2020-11-01 16:08 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Daniel Vetter, Sam Ravnborg, Thomas Zimmermann,
Bartlomiej Zolnierkiewicz, Jiri Slaby, dri-devel, linux-fbdev,
linux-kernel
On Sun, Nov 01, 2020 at 04:41:13PM +0100, Greg Kroah-Hartman wrote:
> On Sun, Nov 01, 2020 at 09:49:04AM -0500, Peilin Ye wrote:
> > Replace printk() with pr_err(), pr_warn() and pr_info(). Do not split long
> > strings, for easier grepping. Use `__func__` whenever applicable.
> >
> > fbcon_prepare_logo() has more than one callers, use "fbcon_prepare_logo:"
> > instead of "fbcon_init:", for less confusion.
> >
> > Suggested-by: Sam Ravnborg <sam@ravnborg.org>
> > Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
> > ---
> > drivers/video/fbdev/core/fbcon.c | 42 +++++++++++++-------------------
> > 1 file changed, 17 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
> > index cef437817b0d..a3e87ab0e523 100644
> > --- a/drivers/video/fbdev/core/fbcon.c
> > +++ b/drivers/video/fbdev/core/fbcon.c
> > @@ -659,8 +659,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
> >
> > if (logo_lines > vc->vc_bottom) {
> > logo_shown = FBCON_LOGO_CANSHOW;
> > - printk(KERN_INFO
> > - "fbcon_init: disable boot-logo (boot-logo bigger than screen).\n");
> > + pr_info("%s: disable boot-logo (boot-logo bigger than screen).\n", __func__);
>
> Shouldn't this be:
> dev_info(info->dev, "...");
> instead?
>
> It's a driver, and you have access to the struct device that is being
> worked on, so always try to use the dev_* versions of these calls
> instead when ever possible.
Ah, I see. I'll fix them in v2, thank you!
Peilin
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-11-01 16:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-21 12:15 [PATCH] video/fbdev/core: Mark debug-only variable as __maybe_unused Thomas Zimmermann
2020-11-01 9:47 ` Sam Ravnborg
2020-11-01 10:09 ` Peilin Ye
2020-11-01 14:49 ` [PATCH] fbcon: Replace printk() with pr_*() Peilin Ye
2020-11-01 15:41 ` Greg Kroah-Hartman
2020-11-01 16:08 ` Peilin Ye
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).