linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: cy_huang <u0084500@gmail.com>
Cc: lgirdwood@gmail.com, broonie@kernel.org,
	daniel.thompson@linaro.org, jingoohan1@gmail.com,
	b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org,
	linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	ChiYuan Huang <cy_huang@richtek.com>
Subject: Re: [PATCH v5 1/6] mfd: rt4831: Adds support for Richtek RT4831 core
Date: Wed, 13 Jan 2021 12:21:33 +0000	[thread overview]
Message-ID: <20210113122133.GC3975472@dell> (raw)
In-Reply-To: <1608217244-314-1-git-send-email-u0084500@gmail.com>

On Thu, 17 Dec 2020, cy_huang wrote:

> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> This adds support Richtek RT4831 core. It includes four channel WLED driver
> and Display Bias Voltage outputs.
> 
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> since v5
> - Rename file name from rt4831-core.c to rt4831.c
> - Change RICHTEK_VID to RICHTEK_VENDOR_ID.
> - Change gpio_desc nameing from 'enable' to 'enable_gpio' in probe.
> - Change variable 'val' to the meaningful name 'chip_id'.
> - Refine the error log when vendor id is not matched.
> - Remove of_match_ptr.
> 
> since v2
> - Refine Kconfig descriptions.
> - Add copyright.
> - Refine error logs in probe.
> - Refine comment lines in remove and shutdown.
> ---
>  drivers/mfd/Kconfig  |  10 +++++
>  drivers/mfd/Makefile |   1 +
>  drivers/mfd/rt4831.c | 124 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 135 insertions(+)
>  create mode 100644 drivers/mfd/rt4831.c
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 8b99a13..dfb2640 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1088,6 +1088,16 @@ config MFD_RDC321X
>  	  southbridge which provides access to GPIOs and Watchdog using the
>  	  southbridge PCI device configuration space.
>  
> +config MFD_RT4831
> +	tristate "Richtek RT4831 four channel WLED and Display Bias Voltage"
> +	depends on I2C
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	help
> +	  This enables support for the Richtek RT4831 that includes 4 channel
> +	  WLED driving and Display Bias Voltage. It's commonly used to provide
> +	  power to the LCD display and LCD backlight.
> +
>  config MFD_RT5033
>  	tristate "Richtek RT5033 Power Management IC"
>  	depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 1780019..28d247b 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -235,6 +235,7 @@ obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
>  obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
>  obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
>  obj-$(CONFIG_MFD_DLN2)		+= dln2.o
> +obj-$(CONFIG_MFD_RT4831)	+= rt4831.o
>  obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
>  obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
>  
> diff --git a/drivers/mfd/rt4831.c b/drivers/mfd/rt4831.c
> new file mode 100644
> index 00000000..2bf8364
> --- /dev/null
> +++ b/drivers/mfd/rt4831.c
> @@ -0,0 +1,124 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2020 Richtek Technology Corp.

Nit: If you respin this, please bump the date.

> + * Author: ChiYuan Huang <cy_huang@richtek.com>
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#define RT4831_REG_REVISION	0x01
> +#define RT4831_REG_ENABLE	0x08
> +#define RT4831_REG_I2CPROT	0x15
> +
> +#define RICHTEK_VENDOR_ID	0x03
> +#define RT4831_VID_MASK		GENMASK(1, 0)
> +#define RT4831_RESET_MASK	BIT(7)
> +#define RT4831_I2CSAFETMR_MASK	BIT(0)
> +
> +static const struct mfd_cell rt4831_subdevs[] = {
> +	OF_MFD_CELL("rt4831-backlight", NULL, NULL, 0, 0, "richtek,rt4831-backlight"),
> +	MFD_CELL_NAME("rt4831-regulator")
> +};
> +
> +static bool rt4831_is_accessible_reg(struct device *dev, unsigned int reg)
> +{
> +	if (reg >= RT4831_REG_REVISION && reg <= RT4831_REG_I2CPROT)
> +		return true;
> +	return false;
> +}
> +
> +static const struct regmap_config rt4831_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = RT4831_REG_I2CPROT,
> +
> +	.readable_reg = rt4831_is_accessible_reg,
> +	.writeable_reg = rt4831_is_accessible_reg,
> +};
> +
> +static int rt4831_probe(struct i2c_client *client)
> +{
> +	struct gpio_desc *enable_gpio;
> +	struct regmap *regmap;
> +	unsigned int chip_id;
> +	int ret;
> +
> +	enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_HIGH);
> +	if (IS_ERR(enable_gpio)) {
> +		dev_err(&client->dev, "Failed to get 'enable' GPIO\n");
> +		return PTR_ERR(enable_gpio);
> +	}
> +
> +	regmap = devm_regmap_init_i2c(client, &rt4831_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&client->dev, "Failed to initialize regmap\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	ret = regmap_read(regmap, RT4831_REG_REVISION, &chip_id);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to get H/W revision\n");
> +		return ret;
> +	}
> +
> +	if ((chip_id & RT4831_VID_MASK) != RICHTEK_VENDOR_ID) {
> +		dev_err(&client->dev, "Chip vendor ID 0x%02x not matched\n", chip_id);
> +		return -ENODEV;
> +	}
> +
> +	/*
> +	 * Used to prevent the abnormal shutdown.
> +	 * If SCL/SDA both keep low for one second to reset HW.
> +	 */
> +	ret = regmap_update_bits(regmap, RT4831_REG_I2CPROT, RT4831_I2CSAFETMR_MASK,
> +				 RT4831_I2CSAFETMR_MASK);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to enable I2C safety timer\n");
> +		return ret;
> +	}
> +
> +	return devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, rt4831_subdevs,
> +				    ARRAY_SIZE(rt4831_subdevs), NULL, 0, NULL);
> +}
> +
> +static int rt4831_remove(struct i2c_client *client)
> +{
> +	struct regmap *regmap = dev_get_regmap(&client->dev, NULL);
> +
> +	/* Disable WLED and DSV outputs */
> +	return regmap_update_bits(regmap, RT4831_REG_ENABLE, RT4831_RESET_MASK, RT4831_RESET_MASK);
> +}
> +
> +static void rt4831_shutdown(struct i2c_client *client)
> +{
> +	struct regmap *regmap = dev_get_regmap(&client->dev, NULL);
> +
> +	/* Disable WLED and DSV outputs */
> +	regmap_update_bits(regmap, RT4831_REG_ENABLE, RT4831_RESET_MASK, RT4831_RESET_MASK);
> +}

What is your reason for providing a .shutdown() routine?

> +static const struct of_device_id __maybe_unused rt4831_of_match[] = {
> +	{ .compatible = "richtek,rt4831", },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, rt4831_of_match);
> +
> +static struct i2c_driver rt4831_driver = {
> +	.driver = {
> +		.name = "rt4831",
> +		.of_match_table = rt4831_of_match,
> +	},
> +	.probe_new = rt4831_probe,
> +	.remove = rt4831_remove,
> +	.shutdown = rt4831_shutdown,
> +};
> +module_i2c_driver(rt4831_driver);
> +
> +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
> +MODULE_LICENSE("GPL v2");

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

  parent reply	other threads:[~2021-01-13 12:22 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-17 15:00 cy_huang
2020-12-17 15:00 ` [PATCH v5 2/6] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight cy_huang
2020-12-17 15:00 ` [PATCH v5 3/6] regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV regulator cy_huang
2020-12-17 15:00 ` [PATCH v5 4/6] mfd: rt4831: Adds DT binding document for Richtek RT4831 core cy_huang
2020-12-17 15:00 ` [PATCH v5 5/6] backlight: rt4831: Adds support for Richtek RT4831 backlight cy_huang
2021-03-25  8:22   ` ChiYuan Huang
2021-03-25 11:54     ` Daniel Thompson
2021-03-25 11:53   ` Daniel Thompson
2020-12-17 15:00 ` [PATCH v5 6/6] regulator: rt4831: Adds support for Richtek RT4831 DSV regulator cy_huang
2020-12-28 16:13 ` (subset) [PATCH v5 1/6] mfd: rt4831: Adds support for Richtek RT4831 core Mark Brown
2021-01-13 12:21 ` Lee Jones [this message]
2021-01-13 14:09   ` ChiYuan Huang
2021-03-25  8:25     ` ChiYuan Huang
2021-03-25 14:31       ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210113122133.GC3975472@dell \
    --to=lee.jones@linaro.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=broonie@kernel.org \
    --cc=cy_huang@richtek.com \
    --cc=daniel.thompson@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jingoohan1@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=u0084500@gmail.com \
    --subject='Re: [PATCH v5 1/6] mfd: rt4831: Adds support for Richtek RT4831 core' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).