[PATCH v4 0/5] staging: fbtft: Fixing GPIO handling issues

[PATCH v4 0/5] staging: fbtft: Fixing GPIO handling issues

[Andy Shevchenko]

This series fixes a number of GPIO handling issues after converting this driver
to use descriptors.

The series has been tested on HX8347d display with parallel interface. Without
first patch it's not working.

In v4:
- fixed Fixes tags (Greg)
- added return statement to dev_err_probe() (Dan)
- new patch to support orientation on HX8347d

In v3:
- added staging prefix (Fabio)
- slightly amended commit message in the patch 1
- added Rb tag (Phil)
- dropped Fixes tag from the patch 2 (Greg)

Andy Shevchenko (5):
  staging: fbtft: Rectify GPIO handling
  staging: fbtft: Don't spam logs when probe is deferred
  staging: fbtft: Add support for orientation on Himax HX8347d
  staging: fbtft: Replace custom ->reset() with generic one
  staging: fbtft: Update TODO

 drivers/staging/fbtft/TODO             |  5 -----
 drivers/staging/fbtft/fb_agm1264k-fl.c | 30 +++++++-------------------
 drivers/staging/fbtft/fb_bd663474.c    |  4 ----
 drivers/staging/fbtft/fb_hx8347d.c     | 29 ++++++++++++++++++++++---
 drivers/staging/fbtft/fb_ili9163.c     |  4 ----
 drivers/staging/fbtft/fb_ili9320.c     |  1 -
 drivers/staging/fbtft/fb_ili9325.c     |  4 ----
 drivers/staging/fbtft/fb_ili9340.c     |  1 -
 drivers/staging/fbtft/fb_s6d1121.c     |  4 ----
 drivers/staging/fbtft/fb_sh1106.c      |  1 -
 drivers/staging/fbtft/fb_ssd1289.c     |  4 ----
 drivers/staging/fbtft/fb_ssd1325.c     |  2 --
 drivers/staging/fbtft/fb_ssd1331.c     |  6 ++----
 drivers/staging/fbtft/fb_ssd1351.c     |  1 -
 drivers/staging/fbtft/fb_upd161704.c   |  4 ----
 drivers/staging/fbtft/fb_watterott.c   |  1 -
 drivers/staging/fbtft/fbtft-bus.c      |  3 +--
 drivers/staging/fbtft/fbtft-core.c     | 25 +++++++++------------
 drivers/staging/fbtft/fbtft-io.c       | 12 +++++------
 19 files changed, 53 insertions(+), 88 deletions(-)

-- 
2.30.2

[PATCH v4 1/5] staging: fbtft: Rectify GPIO handling

[Andy Shevchenko]

The infamous commit c440eee1a7a1 ("Staging: staging: fbtft: Switch to
the GPIO descriptor interface") broke GPIO handling completely.
It has already four commits to rectify and it seems not enough.
In order to fix the mess here we:

  1) Set default to "inactive" for all requested pins

  2) Fix CS#, RD#, and WR# pins polarity since it's active low
     and GPIO descriptor interface takes it into consideration
     from the Device Tree or ACPI

  3) Consolidate chip activation (CS# assertion) under default
     ->reset() callback

To summarize the expectations about polarity for GPIOs:

   RD#			Low
   WR#			Low
   CS#			Low
   RESET#		Low
   DC or RS		High
   RW			High
   Data	0 .. 15		High

See also Adafruit learning course [1] for the example of the schematics.

While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.

[1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads

Fixes: 92e3e884887c ("Staging: fbtft: Fix GPIO handling")
Fixes: b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
Fixes: dbc4f989c878 ("Staging: fbtft: Fix probing of gpio descriptor")
Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: Jan Sebastian Götte <linux@jaseg.net>
Cc: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
---
 drivers/staging/fbtft/fb_agm1264k-fl.c | 20 ++++++++++----------
 drivers/staging/fbtft/fb_bd663474.c    |  4 ----
 drivers/staging/fbtft/fb_ili9163.c     |  4 ----
 drivers/staging/fbtft/fb_ili9320.c     |  1 -
 drivers/staging/fbtft/fb_ili9325.c     |  4 ----
 drivers/staging/fbtft/fb_ili9340.c     |  1 -
 drivers/staging/fbtft/fb_s6d1121.c     |  4 ----
 drivers/staging/fbtft/fb_sh1106.c      |  1 -
 drivers/staging/fbtft/fb_ssd1289.c     |  4 ----
 drivers/staging/fbtft/fb_ssd1325.c     |  2 --
 drivers/staging/fbtft/fb_ssd1331.c     |  6 ++----
 drivers/staging/fbtft/fb_ssd1351.c     |  1 -
 drivers/staging/fbtft/fb_upd161704.c   |  4 ----
 drivers/staging/fbtft/fb_watterott.c   |  1 -
 drivers/staging/fbtft/fbtft-bus.c      |  3 +--
 drivers/staging/fbtft/fbtft-core.c     | 13 ++++++-------
 drivers/staging/fbtft/fbtft-io.c       | 12 ++++++------
 17 files changed, 25 insertions(+), 60 deletions(-)

diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index eeeeec97ad27..b545c2ca80a4 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -84,9 +84,9 @@ static void reset(struct fbtft_par *par)
 
 	dev_dbg(par->info->device, "%s()\n", __func__);
 
-	gpiod_set_value(par->gpio.reset, 0);
-	udelay(20);
 	gpiod_set_value(par->gpio.reset, 1);
+	udelay(20);
+	gpiod_set_value(par->gpio.reset, 0);
 	mdelay(120);
 }
 
@@ -194,12 +194,12 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 	/* select chip */
 	if (*buf) {
 		/* cs1 */
-		gpiod_set_value(par->CS0, 1);
-		gpiod_set_value(par->CS1, 0);
-	} else {
-		/* cs0 */
 		gpiod_set_value(par->CS0, 0);
 		gpiod_set_value(par->CS1, 1);
+	} else {
+		/* cs0 */
+		gpiod_set_value(par->CS0, 1);
+		gpiod_set_value(par->CS1, 0);
 	}
 
 	gpiod_set_value(par->RS, 0); /* RS->0 (command mode) */
@@ -397,8 +397,8 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 	}
 	kfree(convert_buf);
 
-	gpiod_set_value(par->CS0, 1);
-	gpiod_set_value(par->CS1, 1);
+	gpiod_set_value(par->CS0, 0);
+	gpiod_set_value(par->CS1, 0);
 
 	return ret;
 }
@@ -419,10 +419,10 @@ static int write(struct fbtft_par *par, void *buf, size_t len)
 		for (i = 0; i < 8; ++i)
 			gpiod_set_value(par->gpio.db[i], data & (1 << i));
 		/* set E */
-		gpiod_set_value(par->EPIN, 1);
+		gpiod_set_value(par->EPIN, 0);
 		udelay(5);
 		/* unset E - write */
-		gpiod_set_value(par->EPIN, 0);
+		gpiod_set_value(par->EPIN, 1);
 		udelay(1);
 	}
 
diff --git a/drivers/staging/fbtft/fb_bd663474.c b/drivers/staging/fbtft/fb_bd663474.c
index e2c7646588f8..1629c2c440a9 100644
--- a/drivers/staging/fbtft/fb_bd663474.c
+++ b/drivers/staging/fbtft/fb_bd663474.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -24,9 +23,6 @@
 
 static int init_display(struct fbtft_par *par)
 {
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	par->fbtftops.reset(par);
 
 	/* Initialization sequence from Lib_UTFT */
diff --git a/drivers/staging/fbtft/fb_ili9163.c b/drivers/staging/fbtft/fb_ili9163.c
index 05648c3ffe47..6582a2c90aaf 100644
--- a/drivers/staging/fbtft/fb_ili9163.c
+++ b/drivers/staging/fbtft/fb_ili9163.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <video/mipi_display.h>
 
@@ -77,9 +76,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	write_reg(par, MIPI_DCS_SOFT_RESET); /* software reset */
 	mdelay(500);
 	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); /* exit sleep */
diff --git a/drivers/staging/fbtft/fb_ili9320.c b/drivers/staging/fbtft/fb_ili9320.c
index f2e72d14431d..a8f4c618b754 100644
--- a/drivers/staging/fbtft/fb_ili9320.c
+++ b/drivers/staging/fbtft/fb_ili9320.c
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
 
diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c
index c9aa4cb43123..16d3b17ca279 100644
--- a/drivers/staging/fbtft/fb_ili9325.c
+++ b/drivers/staging/fbtft/fb_ili9325.c
@@ -10,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -85,9 +84,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	bt &= 0x07;
 	vc &= 0x07;
 	vrh &= 0x0f;
diff --git a/drivers/staging/fbtft/fb_ili9340.c b/drivers/staging/fbtft/fb_ili9340.c
index 415183c7054a..704236bcaf3f 100644
--- a/drivers/staging/fbtft/fb_ili9340.c
+++ b/drivers/staging/fbtft/fb_ili9340.c
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <video/mipi_display.h>
 
diff --git a/drivers/staging/fbtft/fb_s6d1121.c b/drivers/staging/fbtft/fb_s6d1121.c
index 8c7de3290343..62f27172f844 100644
--- a/drivers/staging/fbtft/fb_s6d1121.c
+++ b/drivers/staging/fbtft/fb_s6d1121.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -29,9 +28,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	/* Initialization sequence from Lib_UTFT */
 
 	write_reg(par, 0x0011, 0x2004);
diff --git a/drivers/staging/fbtft/fb_sh1106.c b/drivers/staging/fbtft/fb_sh1106.c
index 6f7249493ea3..7b9ab39e1c1a 100644
--- a/drivers/staging/fbtft/fb_sh1106.c
+++ b/drivers/staging/fbtft/fb_sh1106.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
diff --git a/drivers/staging/fbtft/fb_ssd1289.c b/drivers/staging/fbtft/fb_ssd1289.c
index 7a3fe022cc69..f27bab38b3ec 100644
--- a/drivers/staging/fbtft/fb_ssd1289.c
+++ b/drivers/staging/fbtft/fb_ssd1289.c
@@ -10,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 
 #include "fbtft.h"
 
@@ -28,9 +27,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	write_reg(par, 0x00, 0x0001);
 	write_reg(par, 0x03, 0xA8A4);
 	write_reg(par, 0x0C, 0x0000);
diff --git a/drivers/staging/fbtft/fb_ssd1325.c b/drivers/staging/fbtft/fb_ssd1325.c
index 8a3140d41d8b..796a2ac3e194 100644
--- a/drivers/staging/fbtft/fb_ssd1325.c
+++ b/drivers/staging/fbtft/fb_ssd1325.c
@@ -35,8 +35,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	gpiod_set_value(par->gpio.cs, 0);
-
 	write_reg(par, 0xb3);
 	write_reg(par, 0xf0);
 	write_reg(par, 0xae);
diff --git a/drivers/staging/fbtft/fb_ssd1331.c b/drivers/staging/fbtft/fb_ssd1331.c
index 37622c9462aa..ec5eced7f8cb 100644
--- a/drivers/staging/fbtft/fb_ssd1331.c
+++ b/drivers/staging/fbtft/fb_ssd1331.c
@@ -81,8 +81,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 	va_start(args, len);
 
 	*buf = (u8)va_arg(args, unsigned int);
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 0);
+	gpiod_set_value(par->gpio.dc, 0);
 	ret = par->fbtftops.write(par, par->buf, sizeof(u8));
 	if (ret < 0) {
 		va_end(args);
@@ -104,8 +103,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 			return;
 		}
 	}
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 1);
+	gpiod_set_value(par->gpio.dc, 1);
 	va_end(args);
 }
 
diff --git a/drivers/staging/fbtft/fb_ssd1351.c b/drivers/staging/fbtft/fb_ssd1351.c
index 900b28d826b2..cf263a58a148 100644
--- a/drivers/staging/fbtft/fb_ssd1351.c
+++ b/drivers/staging/fbtft/fb_ssd1351.c
@@ -2,7 +2,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
 
diff --git a/drivers/staging/fbtft/fb_upd161704.c b/drivers/staging/fbtft/fb_upd161704.c
index c77832ae5e5b..c680160d6380 100644
--- a/drivers/staging/fbtft/fb_upd161704.c
+++ b/drivers/staging/fbtft/fb_upd161704.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -26,9 +25,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	/* Initialization sequence from Lib_UTFT */
 
 	/* register reset */
diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c
index 76b25df376b8..a57e1f4feef3 100644
--- a/drivers/staging/fbtft/fb_watterott.c
+++ b/drivers/staging/fbtft/fb_watterott.c
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
diff --git a/drivers/staging/fbtft/fbtft-bus.c b/drivers/staging/fbtft/fbtft-bus.c
index 63c65dd67b17..3d422bc11641 100644
--- a/drivers/staging/fbtft/fbtft-bus.c
+++ b/drivers/staging/fbtft/fbtft-bus.c
@@ -135,8 +135,7 @@ int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
 	remain = len / 2;
 	vmem16 = (u16 *)(par->info->screen_buffer + offset);
 
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 1);
+	gpiod_set_value(par->gpio.dc, 1);
 
 	/* non buffered write */
 	if (!par->txbuf.buf)
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 4f362dad4436..67c3b1975a4d 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -38,8 +38,7 @@ int fbtft_write_buf_dc(struct fbtft_par *par, void *buf, size_t len, int dc)
 {
 	int ret;
 
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, dc);
+	gpiod_set_value(par->gpio.dc, dc);
 
 	ret = par->fbtftops.write(par, buf, len);
 	if (ret < 0)
@@ -79,7 +78,7 @@ static int fbtft_request_one_gpio(struct fbtft_par *par,
 	int ret = 0;
 
 	*gpiop = devm_gpiod_get_index_optional(dev, name, index,
-					       GPIOD_OUT_HIGH);
+					       GPIOD_OUT_LOW);
 	if (IS_ERR(*gpiop)) {
 		ret = PTR_ERR(*gpiop);
 		dev_err(dev,
@@ -226,11 +225,15 @@ static void fbtft_reset(struct fbtft_par *par)
 {
 	if (!par->gpio.reset)
 		return;
+
 	fbtft_par_dbg(DEBUG_RESET, par, "%s()\n", __func__);
+
 	gpiod_set_value_cansleep(par->gpio.reset, 1);
 	usleep_range(20, 40);
 	gpiod_set_value_cansleep(par->gpio.reset, 0);
 	msleep(120);
+
+	gpiod_set_value_cansleep(par->gpio.cs, 1);  /* Activate chip */
 }
 
 static void fbtft_update_display(struct fbtft_par *par, unsigned int start_line,
@@ -922,8 +925,6 @@ static int fbtft_init_display_from_property(struct fbtft_par *par)
 		goto out_free;
 
 	par->fbtftops.reset(par);
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
 
 	index = -1;
 	val = values[++index];
@@ -1018,8 +1019,6 @@ int fbtft_init_display(struct fbtft_par *par)
 	}
 
 	par->fbtftops.reset(par);
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
 
 	i = 0;
 	while (i < FBTFT_MAX_INIT_SEQUENCE) {
diff --git a/drivers/staging/fbtft/fbtft-io.c b/drivers/staging/fbtft/fbtft-io.c
index 0863d257d762..de1904a443c2 100644
--- a/drivers/staging/fbtft/fbtft-io.c
+++ b/drivers/staging/fbtft/fbtft-io.c
@@ -142,12 +142,12 @@ int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
 		data = *(u8 *)buf;
 
 		/* Start writing by pulling down /WR */
-		gpiod_set_value(par->gpio.wr, 0);
+		gpiod_set_value(par->gpio.wr, 1);
 
 		/* Set data */
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		if (data == prev_data) {
-			gpiod_set_value(par->gpio.wr, 0); /* used as delay */
+			gpiod_set_value(par->gpio.wr, 1); /* used as delay */
 		} else {
 			for (i = 0; i < 8; i++) {
 				if ((data & 1) != (prev_data & 1))
@@ -165,7 +165,7 @@ int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
 #endif
 
 		/* Pullup /WR */
-		gpiod_set_value(par->gpio.wr, 1);
+		gpiod_set_value(par->gpio.wr, 0);
 
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		prev_data = *(u8 *)buf;
@@ -192,12 +192,12 @@ int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
 		data = *(u16 *)buf;
 
 		/* Start writing by pulling down /WR */
-		gpiod_set_value(par->gpio.wr, 0);
+		gpiod_set_value(par->gpio.wr, 1);
 
 		/* Set data */
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		if (data == prev_data) {
-			gpiod_set_value(par->gpio.wr, 0); /* used as delay */
+			gpiod_set_value(par->gpio.wr, 1); /* used as delay */
 		} else {
 			for (i = 0; i < 16; i++) {
 				if ((data & 1) != (prev_data & 1))
@@ -215,7 +215,7 @@ int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
 #endif
 
 		/* Pullup /WR */
-		gpiod_set_value(par->gpio.wr, 1);
+		gpiod_set_value(par->gpio.wr, 0);
 
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		prev_data = *(u16 *)buf;
-- 
2.30.2

[PATCH v4 2/5] staging: fbtft: Don't spam logs when probe is deferred

[Andy Shevchenko]

When requesting GPIO line the probe can be deferred.
In such case don't spam logs with an error message.
This can be achieved by switching to dev_err_probe().

Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/staging/fbtft/fbtft-core.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 67c3b1975a4d..3723269890d5 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -75,20 +75,16 @@ static int fbtft_request_one_gpio(struct fbtft_par *par,
 				  struct gpio_desc **gpiop)
 {
 	struct device *dev = par->info->device;
-	int ret = 0;
 
 	*gpiop = devm_gpiod_get_index_optional(dev, name, index,
 					       GPIOD_OUT_LOW);
-	if (IS_ERR(*gpiop)) {
-		ret = PTR_ERR(*gpiop);
-		dev_err(dev,
-			"Failed to request %s GPIO: %d\n", name, ret);
-		return ret;
-	}
+	if (IS_ERR(*gpiop))
+		return dev_err_probe(dev, PTR_ERR(*gpiop), "Failed to request %s GPIO\n", name);
+
 	fbtft_par_dbg(DEBUG_REQUEST_GPIOS, par, "%s: '%s' GPIO\n",
 		      __func__, name);
 
-	return ret;
+	return 0;
 }
 
 static int fbtft_request_gpios(struct fbtft_par *par)
-- 
2.30.2

[PATCH v4 3/5] staging: fbtft: Add support for orientation on Himax HX8347d

[Andy Shevchenko]

Himax HX8347d has non-standard register to control orientation.
Add support for different orientation values.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/staging/fbtft/fb_hx8347d.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/fbtft/fb_hx8347d.c b/drivers/staging/fbtft/fb_hx8347d.c
index 37eaf0862c5b..a9b72a8b42b5 100644
--- a/drivers/staging/fbtft/fb_hx8347d.c
+++ b/drivers/staging/fbtft/fb_hx8347d.c
@@ -68,9 +68,6 @@ static int init_display(struct fbtft_par *par)
 	mdelay(40);
 	write_reg(par, 0x28, 0x3C);
 
-	/* orientation */
-	write_reg(par, 0x16, 0x60 | (par->bgr << 3));
-
 	return 0;
 }
 
@@ -87,6 +84,31 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 	write_reg(par, 0x22);
 }
 
+#define MEM_Y   BIT(7) /* MY row address order */
+#define MEM_X   BIT(6) /* MX column address order */
+#define MEM_V   BIT(5) /* MV row / column exchange */
+#define MEM_L   BIT(4) /* ML vertical refresh order */
+#define MEM_BGR (3) /* RGB-BGR Order */
+static int set_var(struct fbtft_par *par)
+{
+	switch (par->info->var.rotate) {
+	case 0:
+		write_reg(par, 0x16, MEM_V | MEM_X | (par->bgr << MEM_BGR));
+		break;
+	case 270:
+		write_reg(par, 0x16, par->bgr << MEM_BGR);
+		break;
+	case 180:
+		write_reg(par, 0x16, MEM_V | MEM_Y | (par->bgr << MEM_BGR));
+		break;
+	case 90:
+		write_reg(par, 0x16, MEM_X | MEM_Y | (par->bgr << MEM_BGR));
+		break;
+	}
+
+	return 0;
+}
+
 /*
  * Gamma string format:
  *   VRP0 VRP1 VRP2 VRP3 VRP4 VRP5 PRP0 PRP1 PKP0 PKP1 PKP2 PKP3 PKP4 CGM
@@ -144,6 +166,7 @@ static struct fbtft_display display = {
 	.fbtftops = {
 		.init_display = init_display,
 		.set_addr_win = set_addr_win,
+		.set_var = set_var,
 		.set_gamma = set_gamma,
 	},
 };
-- 
2.30.2

[PATCH v4 4/5] staging: fbtft: Replace custom ->reset() with generic one

[Andy Shevchenko]

The custom ->reset() repeats the generic one, replace it.

Note, in newer kernels the context of the function is a sleeping one,
it's fine to switch over to the sleeping functions. Keeping the reset
line asserted longer than 20 microseconds is also okay, it's an idling
state of the hardware.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/staging/fbtft/fb_agm1264k-fl.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index b545c2ca80a4..207d578547cd 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -77,19 +77,6 @@ static int init_display(struct fbtft_par *par)
 	return 0;
 }
 
-static void reset(struct fbtft_par *par)
-{
-	if (!par->gpio.reset)
-		return;
-
-	dev_dbg(par->info->device, "%s()\n", __func__);
-
-	gpiod_set_value(par->gpio.reset, 1);
-	udelay(20);
-	gpiod_set_value(par->gpio.reset, 0);
-	mdelay(120);
-}
-
 /* Check if all necessary GPIOS defined */
 static int verify_gpios(struct fbtft_par *par)
 {
@@ -439,7 +426,6 @@ static struct fbtft_display display = {
 		.set_addr_win = set_addr_win,
 		.verify_gpios = verify_gpios,
 		.request_gpios_match = request_gpios_match,
-		.reset = reset,
 		.write = write,
 		.write_register = write_reg8_bus8,
 		.write_vmem = write_vmem,
-- 
2.30.2

[PATCH v4 5/5] staging: fbtft: Update TODO

[Andy Shevchenko]

Now, after a few fixes we may consider the conversion to
the GPIO descriptor API is done.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/staging/fbtft/TODO | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/staging/fbtft/TODO b/drivers/staging/fbtft/TODO
index a9f4802bb6be..e72a08bf221c 100644
--- a/drivers/staging/fbtft/TODO
+++ b/drivers/staging/fbtft/TODO
@@ -1,8 +1,3 @@
-* convert all uses of the old GPIO API from <linux/gpio.h> to the
-  GPIO descriptor API in <linux/gpio/consumer.h> and look up GPIO
-  lines from device tree, ACPI or board files, board files should
-  use <linux/gpio/machine.h>
-
 * convert all these over to drm_simple_display_pipe and submit for inclusion
   into the DRM subsystem under drivers/gpu/drm - fbdev doesn't take any new
   drivers anymore.
-- 
2.30.2