From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 83A1FC47087 for ; Fri, 28 May 2021 12:14:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 67DA9601FD for ; Fri, 28 May 2021 12:14:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236286AbhE1MQB (ORCPT ); Fri, 28 May 2021 08:16:01 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58770 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236301AbhE1MPm (ORCPT ); Fri, 28 May 2021 08:15:42 -0400 Received: from baptiste.telenet-ops.be (baptiste.telenet-ops.be [IPv6:2a02:1800:120:4::f00:13]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8393BC061763 for ; Fri, 28 May 2021 05:13:11 -0700 (PDT) Received: from ramsan.of.borg ([IPv6:2a02:1810:ac12:ed20:7839:f444:cb37:3ebc]) by baptiste.telenet-ops.be with bizsmtp id ACD92500J3gF9cb01CD9rJ; Fri, 28 May 2021 14:13:09 +0200 Received: from rox.of.borg ([192.168.97.57]) by ramsan.of.borg with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.93) (envelope-from ) id 1lmbMS-00AFAw-UV; Fri, 28 May 2021 14:13:08 +0200 Received: from geert by rox.of.borg with local (Exim 4.93) (envelope-from ) id 1lmbMS-007ga2-5l; Fri, 28 May 2021 14:13:08 +0200 From: Geert Uytterhoeven To: Maxime Ripard , David Airlie , Daniel Vetter Cc: Rob Herring , linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, Geert Uytterhoeven , Rob Herring Subject: [PATCH v2] dt-bindings: display: ssd1307fb: Convert to json-schema Date: Fri, 28 May 2021 14:13:06 +0200 Message-Id: <20210528121306.1831931-1-geert@linux-m68k.org> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-fbdev@vger.kernel.org Convert the Solomon SSD1307 Framebuffer Device Tree binding documentation to json-schema. Fix the spelling of the "pwms" property. Document default values. Make properties with default values not required. Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring --- v2: - Add Reviewed-by, - Document solomon,dclk-{div,freq} defaults. --- .../bindings/display/solomon,ssd1307fb.yaml | 208 ++++++++++++++++++ .../devicetree/bindings/display/ssd1307fb.txt | 60 ----- 2 files changed, 208 insertions(+), 60 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml delete mode 100644 Documentation/devicetree/bindings/display/ssd1307fb.txt diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml new file mode 100644 index 0000000000000000..2ed2a7d0ca2fa23e --- /dev/null +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/solomon,ssd1307fb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Solomon SSD1307 OLED Controller Framebuffer + +maintainers: + - Maxime Ripard + +properties: + compatible: + enum: + - solomon,ssd1305fb-i2c + - solomon,ssd1306fb-i2c + - solomon,ssd1307fb-i2c + - solomon,ssd1309fb-i2c + + reg: + maxItems: 1 + + pwms: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vbat-supply: + description: The supply for VBAT + + solomon,height: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 16 + description: + Height in pixel of the screen driven by the controller + + solomon,width: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 96 + description: + Width in pixel of the screen driven by the controller + + solomon,page-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + description: + Offset of pages (band of 8 pixels) that the screen is mapped to + + solomon,segment-no-remap: + type: boolean + description: + Display needs normal (non-inverted) data column to segment mapping + + solomon,col-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Offset of columns (COL/SEG) that the screen is mapped to + + solomon,com-seq: + type: boolean + description: + Display uses sequential COM pin configuration + + solomon,com-lrremap: + type: boolean + description: + Display uses left-right COM pin remap + + solomon,com-invdir: + type: boolean + description: + Display uses inverted COM pin scan direction + + solomon,com-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Number of the COM pin wired to the first display line + + solomon,prechargep1: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: + Length of deselect period (phase 1) in clock cycles + + solomon,prechargep2: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: + Length of precharge period (phase 2) in clock cycles. This needs to be + the higher, the higher the capacitance of the OLED's pixels is. + + solomon,dclk-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 16 + description: + Clock divisor. The default value is controller-dependent. + + solomon,dclk-frq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Clock frequency, higher value means higher frequency. + The default value is controller-dependent. + + solomon,lookup-table: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 4 + description: + 8 bit value array of current drive pulse widths for BANK0, and colors A, + B, and C. Each value in range of 31 to 63 for pulse widths of 32 to 64. + Color D is always width 64. + + solomon,area-color-enable: + type: boolean + description: + Display uses color mode + + solomon,low-power: + type: boolean + description: + Display runs in low power mode + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: solomon,ssd1305fb-i2c + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 7 + + - if: + properties: + compatible: + contains: + const: solomon,ssd1306fb-i2c + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 8 + + - if: + properties: + compatible: + contains: + const: solomon,ssd1307fb-i2c + then: + properties: + solomon,dclk-div: + default: 2 + solomon,dclk-frq: + default: 12 + required: + - pwms + + - if: + properties: + compatible: + contains: + const: solomon,ssd1309fb-i2c + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 10 + +additionalProperties: false + +examples: + - | + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + }; + + ssd1306: oled@3d { + compatible = "solomon,ssd1306fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt deleted file mode 100644 index 2dcb6d12d1371536..0000000000000000 --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Solomon SSD1307 Framebuffer Driver - -Required properties: - - compatible: Should be "solomon,fb-". The only supported bus for - now is i2c, and the supported chips are ssd1305, ssd1306, ssd1307 and - ssd1309. - - reg: Should contain address of the controller on the I2C bus. Most likely - 0x3c or 0x3d - - pwm: Should contain the pwm to use according to the OF device tree PWM - specification [0]. Only required for the ssd1307. - - solomon,height: Height in pixel of the screen driven by the controller - - solomon,width: Width in pixel of the screen driven by the controller - - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is - mapped to. - -Optional properties: - - reset-gpios: The GPIO used to reset the OLED display, if available. See - Documentation/devicetree/bindings/gpio/gpio.txt for details. - - vbat-supply: The supply for VBAT - - solomon,segment-no-remap: Display needs normal (non-inverted) data column - to segment mapping - - solomon,col-offset: Offset of columns (COL/SEG) that the screen is mapped to. - - solomon,com-seq: Display uses sequential COM pin configuration - - solomon,com-lrremap: Display uses left-right COM pin remap - - solomon,com-invdir: Display uses inverted COM pin scan direction - - solomon,com-offset: Number of the COM pin wired to the first display line - - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles. - - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles. - This needs to be the higher, the higher the capacitance - of the OLED's pixels is - - solomon,dclk-div: Clock divisor 1 to 16 - - solomon,dclk-frq: Clock frequency 0 to 15, higher value means higher - frequency - - solomon,lookup-table: 8 bit value array of current drive pulse widths for - BANK0, and colors A, B, and C. Each value in range - of 31 to 63 for pulse widths of 32 to 64. Color D - is always width 64. - - solomon,area-color-enable: Display uses color mode - - solomon,low-power. Display runs in low power mode - -[0]: Documentation/devicetree/bindings/pwm/pwm.txt - -Examples: -ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; -}; - -ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; - solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; -}; -- 2.25.1