Re: [v5 1/5] drm/panel: add basic DP AUX backlight support

Re: [v5 1/5] drm/panel: add basic DP AUX backlight support

[Doug Anderson]

Hi,

On Sun, May 30, 2021 at 8:57 AM Rajeev Nandan <rajeevny@codeaurora.org> wrote:
>
> +static int dp_aux_backlight_update_status(struct backlight_device *bd)
> +{
> +       struct dp_aux_backlight *bl = bl_get_data(bd);
> +       u16 brightness = backlight_get_brightness(bd);
> +       int ret = 0;
> +
> +       if (brightness > 0) {
> +               if (!bl->enabled) {
> +                       drm_edp_backlight_enable(bl->aux, &bl->info, brightness);
> +                       bl->enabled = true;
> +                       return 0;
> +               }
> +               ret = drm_edp_backlight_set_level(bl->aux, &bl->info, brightness);
> +       } else {
> +               if (bl->enabled) {
> +                       drm_edp_backlight_disable(bl->aux, &bl->info);
> +                       bl->enabled = false;
> +               }
> +       }

I was trying to figure out if there are any races / locking problems /
problems trying to tweak the backlight when the panel is off. I don't
_think_ there are. Specifically:

1. Before turning the panel off, drm_panel will call
backlight_disable(). That will set BL_CORE_FBBLANK which is not set by
any other calls. Then it will call your
dp_aux_backlight_update_status().

2. Once BL_CORE_FBBLANK is set then backlight_get_brightness() will
always return 0.

This means that a transition from 0 -> non-zero (and enable) will
always only happen when the panel is on, which is good. It also means
that we'll always transition to 0 (disable the backlight) when the
panel turns off.

In terms of other races, it looks like the AUX transfer code handles
grabbing a mutex around transfers so we should be safe there.

So I guess the above is just a long-winded way of saying that this
looks right to me. :-)

BTW: we should probably make sure that the full set of people
identified by `./scripts/get_maintainer.pl -f
./drivers/video/backlight` are CCed on your series. I see Daniel
already and I've added the rest.


> +/**
> + * drm_panel_dp_aux_backlight - create and use DP AUX backlight
> + * @panel: DRM panel
> + * @aux: The DP AUX channel to use
> + *
> + * Use this function to create and handle backlight if your panel
> + * supports backlight control over DP AUX channel using DPCD
> + * registers as per VESA's standard backlight control interface.
> + *
> + * When the panel is enabled backlight will be enabled after a
> + * successful call to &drm_panel_funcs.enable()
> + *
> + * When the panel is disabled backlight will be disabled before the
> + * call to &drm_panel_funcs.disable().
> + *
> + * A typical implementation for a panel driver supporting backlight
> + * control over DP AUX will call this function at probe time.
> + * Backlight will then be handled transparently without requiring
> + * any intervention from the driver.
> + *
> + * drm_panel_dp_aux_backlight() must be called after the call to drm_panel_init().
> + *
> + * Return: 0 on success or a negative error code on failure.
> + */
> +int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
> +{
> +       struct dp_aux_backlight *bl;
> +       struct backlight_properties props = { 0 };
> +       u16 current_level;
> +       u8 current_mode;
> +       u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE];
> +       int ret;
> +
> +       if (!panel || !panel->dev || !aux)
> +               return -EINVAL;
> +
> +       bl = devm_kzalloc(panel->dev, sizeof(*bl), GFP_KERNEL);
> +       if (!bl)
> +               return -ENOMEM;
> +
> +       bl->aux = aux;
> +
> +       ret = drm_dp_dpcd_read(aux, DP_EDP_DPCD_REV, edp_dpcd,
> +                              EDP_DISPLAY_CTL_CAP_SIZE);
> +       if (ret < 0)
> +               return ret;
> +
> +       if (!drm_edp_backlight_supported(edp_dpcd)) {
> +               DRM_DEV_INFO(panel->dev, "DP AUX backlight is not supported\n");
> +               return 0;
> +       }

nit: move this part up above the memory allocation. There's no reason
to allocate memory for "bl" if the backlight isn't supported.


> @@ -64,8 +65,8 @@ enum drm_panel_orientation;
>   * the panel. This is the job of the .unprepare() function.
>   *
>   * Backlight can be handled automatically if configured using
> - * drm_panel_of_backlight(). Then the driver does not need to implement the
> - * functionality to enable/disable backlight.
> + * drm_panel_of_backlight() or drm_panel_dp_aux_backlight(). Then the driver
> + * does not need to implement the functionality to enable/disable backlight.
>   */
>  struct drm_panel_funcs {
>         /**
> @@ -144,8 +145,8 @@ struct drm_panel {
>          * Backlight device, used to turn on backlight after the call
>          * to enable(), and to turn off backlight before the call to
>          * disable().
> -        * backlight is set by drm_panel_of_backlight() and drivers
> -        * shall not assign it.
> +        * backlight is set by drm_panel_of_backlight()/drm_panel_dp_aux_backlight()
> +        * and drivers shall not assign it.

Slight nit that I would have wrapped the drm_panel_dp_aux_backlight()
to the next line just to avoid one really long line followed by a
short one.

Other than the two nits (ordering of memory allocation and word
wrapping in a comment), this looks good to me. Feel free to add my
Reviewed-by tag when you fix the nits.

NOTE: Even though I have commit access to drm-misc now, I wouldn't
feel comfortable merging this to drm-misc myself without review
feedback from someone more senior. Obviously we're still blocked on my
and Lyude's series landing first, but even assuming those just land
as-is we'll need some more adult supervision before this can land. ;-)
That being said, I personally think this looks pretty nice now.


-Doug



>          */
>         struct backlight_device *backlight;
>
> @@ -208,11 +209,17 @@ static inline int of_drm_get_panel_orientation(const struct device_node *np,
>  #if IS_ENABLED(CONFIG_DRM_PANEL) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
>         (IS_MODULE(CONFIG_DRM) && IS_MODULE(CONFIG_BACKLIGHT_CLASS_DEVICE)))
>  int drm_panel_of_backlight(struct drm_panel *panel);
> +int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux);
>  #else
>  static inline int drm_panel_of_backlight(struct drm_panel *panel)
>  {
>         return 0;
>  }
> +static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel,
> +                                            struct drm_dp_aux *aux)
> +{
> +       return 0;
> +}
>  #endif
>
>  #endif
> --
> 2.7.4
>

Re: [v5 2/5] drm/panel-simple: Support DP AUX backlight

[Doug Anderson]

Hi,

On Sun, May 30, 2021 at 8:57 AM Rajeev Nandan <rajeevny@codeaurora.org> wrote:
>
> If there is no backlight specified in the device tree and the panel
> has access to the DP AUX channel then create a DP AUX backlight if
> supported by the panel.
>
> Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
> ---
>
> This patch depends on [1] (drm/panel: panel-simple: Stash DP AUX bus;
> allow using it for DDC) and the previous patch (2/5) of this series.
>
> Changes in v4:
> - New
>
> Changes in v5:
> - Address review comments and move backlight functions to drm_panel.c (Douglas)
> - Create and register DP AUX backlight if there is no backlight specified in the
>   device tree and panel has the DP AUX channel. (Douglas)
> - The new drm_panel_dp_aux_backlight() will do the drm_edp_backlight_supported() check.
>
> [1] https://lore.kernel.org/dri-devel/20210524165920.v8.7.I18e60221f6d048d14d6c50a770b15f356fa75092@changeid/
>
>  drivers/gpu/drm/panel/panel-simple.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index b09be6e..047fad5 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -800,6 +800,12 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
>         if (err)
>                 goto disable_pm_runtime;
>
> +       if (!panel->base.backlight && panel->aux) {
> +               err = drm_panel_dp_aux_backlight(&panel->base, panel->aux);
> +               if (err)
> +                       goto disable_pm_runtime;
> +       }

It's so nice now!

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [v5 1/5] drm/panel: add basic DP AUX backlight support

[rajeevny]

On 03-06-2021 05:35, Doug Anderson wrote:
> Hi,
> 
> On Sun, May 30, 2021 at 8:57 AM Rajeev Nandan <rajeevny@codeaurora.org> 
> wrote:
>> 

> 
> Other than the two nits (ordering of memory allocation and word
> wrapping in a comment), this looks good to me. Feel free to add my
> Reviewed-by tag when you fix the nits.
> 
> NOTE: Even though I have commit access to drm-misc now, I wouldn't
> feel comfortable merging this to drm-misc myself without review
> feedback from someone more senior. Obviously we're still blocked on my
> and Lyude's series landing first, but even assuming those just land
> as-is we'll need some more adult supervision before this can land. ;-)
> That being said, I personally think this looks pretty nice now.
> 
> 
> -Doug

Thank you, Doug.

I'll address the review comments of this patch and another patch (v5 
3/5)
in the next spin. I'll wait for Lyude to check this series, as she 
wanted
to review it in a few days.


Thanks,
Rajeev