From: Mikulas Patocka <mpatocka@redhat.com>
To: Thomas Zimmermann <tzimmermann@suse.de>
Cc: daniel.vetter@ffwll.ch, sam@ravnborg.org,
geert+renesas@glider.be, bernie@plugable.com, corbet@lwn.net,
dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
linux-doc@vger.kernel.org
Subject: Re: [PATCH] fbdev: Remove udlfb driver
Date: Tue, 1 Dec 2020 05:44:31 -0500 (EST) [thread overview]
Message-ID: <alpine.LRH.2.02.2012010500310.27495@file01.intranet.prod.int.rdu2.redhat.com> (raw)
In-Reply-To: <336a41ef-1e49-6799-1bfd-06fb42419fb8@suse.de>
On Tue, 1 Dec 2020, Thomas Zimmermann wrote:
> Hi
>
> Am 30.11.20 um 15:31 schrieb Mikulas Patocka:
> >
> >
> > On Mon, 30 Nov 2020, Thomas Zimmermann wrote:
> >
> > > Udlfb has been superseded by DRM's udl. The DRM driver is better by
> > > any means and actively maintained. Remove udlfb.
> >
> > Hi
> >
> > I am using udlfb and it's definitely better than the DRM driver. The DRM
> > driver will crash the kernel if you unplug the device while Xorg is
> > running. The framebuffer driver doesn't crash in this case. (I have a cat
> > and the cat sometimes unplugs cables and I don't want to reboot the system
> > because of it :-)
>
> What's the exact STR here? Just open the /dev/fb* and pull the cable.
>
> Do I need a cat? :)
When I run links -g on the DRM driver, it works at first, but after some
unplug/plug I got this:
[ 282.174963] general protection fault, probably for non-canonical address 0xdead0000000000f8: 0000 [#1] PREEMPT SMP
[ 282.177439] CPU: 9 PID: 3377 Comm: links Not tainted 5.10.0-rc6 #1
[ 282.178843] Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009
[ 282.180325] RIP: 0010:fb_deferred_io_mkwrite+0x7c/0x100 [fb]
[ 282.181865] Code: ff 83 e2 01 48 0f 44 c3 f0 48 0f ba 28 00 0f 82 83 00 00 00 49 8b 45 28 49 39 c4 48 8d 50 f8 74 5d 48 39 d3 74 1c 48 8b 4b 20 <48> 39 4a 20 77 4e 48 8b 42 08 4c 39 e0 48 8d 50 f8 74 41 48 39 d3
[ 282.185341] RSP: 0000:ffff888348293de8 EFLAGS: 00010216
[ 282.187166] RAX: dead000000000100 RBX: ffffea0004182980 RCX: 0000000000000000
[ 282.189071] RDX: dead0000000000f8 RSI: 0000000000000801 RDI: ffffffffa045c048
[ 282.191021] RBP: ffff888106af1c00 R08: 000000005fc6128b R09: 000000003626d41e
[ 282.193006] R10: 0000000000000008 R11: ffff88a04fffc000 R12: ffffffffa045c068
[ 282.195015] R13: ffffffffa045c040 R14: ffffffffa045c048 R15: fff000003fffffff
[ 282.197077] FS: 00007fa64cbf4a00(0000) GS:ffff88a00fcc0000(0000) knlGS:0000000000000000
[ 282.199293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 282.201484] CR2: 00007fa63f272008 CR3: 000000105b2e0000 CR4: 00000000000006e0
[ 282.203728] Call Trace:
[ 282.205927] do_page_mkwrite+0x56/0xc0
[ 282.208125] ? __do_fault+0x2d/0xe0
[ 282.210257] handle_mm_fault+0xafc/0x15e0
[ 282.212350] exc_page_fault+0x1ac/0x4a0
[ 282.214408] ? asm_exc_page_fault+0x8/0x30
[ 282.216473] asm_exc_page_fault+0x1e/0x30
[ 282.218462] RIP: 0033:0x7fa64641f3a8
[ 282.220469] Code: c3 48 81 fa 00 08 00 00 77 a8 48 83 fa 40 77 16 f3 0f 7f 07 f3 0f 7f 47 10 f3 0f 7f 44 17 f0 f3 0f 7f 44 17 e0 c3 48 8d 4f 40 <f3> 0f 7f 07 48 83 e1 c0 f3 0f 7f 44 17 f0 f3 0f 7f 47 10 f3 0f 7f
[ 282.224730] RSP: 002b:00007ffe6da66ba8 EFLAGS: 00010206
[ 282.226881] RAX: 00007fa63f272000 RBX: 00007fa64cbf4990 RCX: 00007fa63f272040
[ 282.229094] RDX: 00000000003f4800 RSI: 0000000000000000 RDI: 00007fa63f272000
[ 282.231339] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffffffffff
[ 282.233614] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000f00
[ 282.235927] R13: 00000000003f4800 R14: 00000000003f4800 R15: 0000000000000005
[ 282.238262] Modules linked in: mousedev hid_generic usbhid hid iptable_mangle ipt_REJECT nf_reject_ipv4 tun xt_MASQUERADE iptable_nat xt_tcpudp iscsi_target_mod target_core_pscsi target_core_file ip6table_filter ip6_tables iptable_filter ip_tables x_tables af_packet target_core_mod cpufreq_powersave cpufreq_ondemand cpufreq_userspace configfs
cpufreq_conservative autofs4 binfmt_misc bridge stp llc snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_pcm snd_timer snd soundcore dmi_sysfs nf_nat_ftp nf_conntrack_ftp nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 lm85 hwmon_vid udl drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea fb font fbdev drm drm_panel_orientation_quirks backlight ipv6 ohci_pci amd64_edac_mod edac_mce_amd kvm_amd kvm irqbypass tg3 pcspkr ptp pps_core ehci_pci ohci_hcd ehci_hcd libphy usbcore k10temp hwmon e100 usb_common mii i2c_piix4 pata_serverworks rtc_cmos floppy acpi_cpufreq button processor spadfs evdev
[ 282.257235] ---[ end trace d7968a41c1fbf717 ]---
[ 282.267115] RIP: 0010:fb_deferred_io_mkwrite+0x7c/0x100 [fb]
[ 282.270350] Code: ff 83 e2 01 48 0f 44 c3 f0 48 0f ba 28 00 0f 82 83 00 00 00 49 8b 45 28 49 39 c4 48 8d 50 f8 74 5d 48 39 d3 74 1c 48 8b 4b 20 <48> 39 4a 20 77 4e 48 8b 42 08 4c 39 e0 48 8d 50 f8 74 41 48 39 d3
[ 282.276893] RSP: 0000:ffff888348293de8 EFLAGS: 00010216
[ 282.280202] RAX: dead000000000100 RBX: ffffea0004182980 RCX: 0000000000000000
[ 282.283564] RDX: dead0000000000f8 RSI: 0000000000000801 RDI: ffffffffa045c048
[ 282.286965] RBP: ffff888106af1c00 R08: 000000005fc6128b R09: 000000003626d41e
[ 282.290628] R10: 0000000000000008 R11: ffff88a04fffc000 R12: ffffffffa045c068
[ 282.294039] R13: ffffffffa045c040 R14: ffffffffa045c048 R15: fff000003fffffff
[ 282.297430] FS: 00007fa64cbf4a00(0000) GS:ffff88900fd00000(0000) knlGS:0000000000000000
When I try to run Xorg (from Debian 9) with the kernel 5.10-rc6, it
doesn't work at all, I get this crash:
[ 451.002] (EE) FBDEV(0): FBIOPUTCMAP: Device or resource busy
[ 451.002] (==) FBDEV(0): DPMS enabled
[ 451.002] (--) RandR disabled
[ 451.008] (II) SELinux: Disabled on system
[ 451.008] (II) AIGLX: Screen 0 is not DRI2 capable
[ 451.008] (EE) AIGLX: reverting to software rendering
[ 451.011] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 451.011] (II) IGLX: Loaded and initialized swrast
[ 451.011] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 451.012] (II) modeset(G0): Damage tracking initialized
[ 451.012] (EE)
[ 451.012] (EE) Backtrace:
[ 451.013] (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4a) [0x5611eb3b973a]
[ 451.013] (EE) 1: /usr/lib/xorg/Xorg (0x5611eb200000+0x1bd4c9) [0x5611eb3bd4c9]
[ 451.013] (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fd7dbb16000+0x110e0) [0x7fd7dbb270e0]
[ 451.013] (EE) 3: /usr/lib/xorg/Xorg (RRSetChanged+0x92) [0x5611eb3175f2]
[ 451.013] (EE) 4: /usr/lib/xorg/Xorg (RRScreenSetSizeRange+0x54) [0x5611eb31c1b4]
[ 451.013] (EE) 5: /usr/lib/xorg/Xorg (xf86RandR12CreateScreenResources+0x310) [0x5611eb2d59d0]
[ 451.013] (EE) 6: /usr/lib/xorg/Xorg (0x5611eb200000+0xc8b60) [0x5611eb2c8b60]
[ 451.013] (EE) 7: /usr/lib/xorg/Xorg (0x5611eb200000+0x590c1) [0x5611eb2590c1]
[ 451.013] (EE) 8: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf1) [0x7fd7db7972e1]
[ 451.013] (EE) 9: /usr/lib/xorg/Xorg (_start+0x2a) [0x5611eb242f0a]
[ 451.013] (EE)
[ 451.013] (EE) Segmentation fault at address 0xb8
[ 451.013] (EE)
Fatal server error:
[ 451.013] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 451.013] (EE)
[ 451.013] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 451.013] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 451.013] (EE)
[ 451.063] (EE) Server terminated with error (1). Closing log file.
Mikulas
next prev parent reply other threads:[~2020-12-01 10:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-30 12:52 [PATCH] fbdev: Remove udlfb driver Thomas Zimmermann
2020-11-30 14:31 ` Mikulas Patocka
2020-11-30 15:41 ` Daniel Vetter
2020-11-30 18:39 ` Mikulas Patocka
2020-11-30 21:06 ` Daniel Vetter
2020-12-01 11:26 ` Mikulas Patocka
2020-12-01 8:07 ` Thomas Zimmermann
2020-12-01 11:20 ` Mikulas Patocka
2020-12-02 7:55 ` Thomas Zimmermann
2020-12-02 8:01 ` Thomas Zimmermann
2020-12-02 8:29 ` Pekka Paalanen
2020-12-02 17:52 ` Daniel Vetter
2020-12-01 8:02 ` Thomas Zimmermann
2020-12-01 10:44 ` Mikulas Patocka [this message]
2020-12-01 20:09 ` Mikulas Patocka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LRH.2.02.2012010500310.27495@file01.intranet.prod.int.rdu2.redhat.com \
--to=mpatocka@redhat.com \
--cc=bernie@plugable.com \
--cc=corbet@lwn.net \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert+renesas@glider.be \
--cc=linux-doc@vger.kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).