* linux firmware PR for i915 GuC v49.0.1
@ 2020-11-25 1:42 John.C.Harrison
2020-11-25 1:42 ` [Intel-gfx] " John.C.Harrison
2020-11-30 14:26 ` Josh Boyer
0 siblings, 2 replies; 10+ messages in thread
From: John.C.Harrison @ 2020-11-25 1:42 UTC (permalink / raw)
To: linux-firmware; +Cc: jwboyer, kyle, ben, intel-gfx
Hi Josh, Kyle, Ben,
Kindly add the below i915 changes to linux-firmware.git:
The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
are available in the Git repository at:
git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
----------------------------------------------------------------
John Harrison (2):
i915: Remove duplicate KBL DMC entry
i915: Add GuC firmware v49.0.1 for all platforms
WHENCE | 25 ++++++++++++++++++++++++-
i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
9 files changed, 24 insertions(+), 1 deletion(-)
create mode 100644 i915/bxt_guc_49.0.1.bin
create mode 100644 i915/cml_guc_49.0.1.bin
create mode 100644 i915/ehl_guc_49.0.1.bin
create mode 100644 i915/glk_guc_49.0.1.bin
create mode 100644 i915/icl_guc_49.0.1.bin
create mode 100644 i915/kbl_guc_49.0.1.bin
create mode 100644 i915/skl_guc_49.0.1.bin
create mode 100644 i915/tgl_guc_49.0.1.bin
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
2020-11-25 1:42 linux firmware PR for i915 GuC v49.0.1 John.C.Harrison
@ 2020-11-25 1:42 ` John.C.Harrison
2020-11-30 14:26 ` Josh Boyer
1 sibling, 0 replies; 10+ messages in thread
From: John.C.Harrison @ 2020-11-25 1:42 UTC (permalink / raw)
To: linux-firmware; +Cc: jwboyer, intel-gfx, kyle, ben
Hi Josh, Kyle, Ben,
Kindly add the below i915 changes to linux-firmware.git:
The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
are available in the Git repository at:
git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
----------------------------------------------------------------
John Harrison (2):
i915: Remove duplicate KBL DMC entry
i915: Add GuC firmware v49.0.1 for all platforms
WHENCE | 25 ++++++++++++++++++++++++-
i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
9 files changed, 24 insertions(+), 1 deletion(-)
create mode 100644 i915/bxt_guc_49.0.1.bin
create mode 100644 i915/cml_guc_49.0.1.bin
create mode 100644 i915/ehl_guc_49.0.1.bin
create mode 100644 i915/glk_guc_49.0.1.bin
create mode 100644 i915/icl_guc_49.0.1.bin
create mode 100644 i915/kbl_guc_49.0.1.bin
create mode 100644 i915/skl_guc_49.0.1.bin
create mode 100644 i915/tgl_guc_49.0.1.bin
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux firmware PR for i915 GuC v49.0.1
2020-11-25 1:42 linux firmware PR for i915 GuC v49.0.1 John.C.Harrison
2020-11-25 1:42 ` [Intel-gfx] " John.C.Harrison
@ 2020-11-30 14:26 ` Josh Boyer
2020-11-30 14:26 ` [Intel-gfx] " Josh Boyer
2020-11-30 18:49 ` John Harrison
1 sibling, 2 replies; 10+ messages in thread
From: Josh Boyer @ 2020-11-30 14:26 UTC (permalink / raw)
To: John.C.Harrison
Cc: Linux Firmware, Kyle McMartin, Ben Hutchings, Intel Graphics Development
On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>
> Hi Josh, Kyle, Ben,
>
> Kindly add the below i915 changes to linux-firmware.git:
>
>
> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>
> Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>
> are available in the Git repository at:
>
> git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
This doesn't exist. Git complains with:
fatal: couldn't find remote ref FDO/guc_v49
Did you just mean guc_v49?
josh
>
> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>
> i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>
> ----------------------------------------------------------------
> John Harrison (2):
> i915: Remove duplicate KBL DMC entry
> i915: Add GuC firmware v49.0.1 for all platforms
>
> WHENCE | 25 ++++++++++++++++++++++++-
> i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
> i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
> i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
> i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
> 9 files changed, 24 insertions(+), 1 deletion(-)
> create mode 100644 i915/bxt_guc_49.0.1.bin
> create mode 100644 i915/cml_guc_49.0.1.bin
> create mode 100644 i915/ehl_guc_49.0.1.bin
> create mode 100644 i915/glk_guc_49.0.1.bin
> create mode 100644 i915/icl_guc_49.0.1.bin
> create mode 100644 i915/kbl_guc_49.0.1.bin
> create mode 100644 i915/skl_guc_49.0.1.bin
> create mode 100644 i915/tgl_guc_49.0.1.bin
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
2020-11-30 14:26 ` Josh Boyer
@ 2020-11-30 14:26 ` Josh Boyer
2020-11-30 18:49 ` John Harrison
1 sibling, 0 replies; 10+ messages in thread
From: Josh Boyer @ 2020-11-30 14:26 UTC (permalink / raw)
To: John.C.Harrison
Cc: Intel Graphics Development, Kyle McMartin, Ben Hutchings, Linux Firmware
On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>
> Hi Josh, Kyle, Ben,
>
> Kindly add the below i915 changes to linux-firmware.git:
>
>
> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>
> Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>
> are available in the Git repository at:
>
> git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
This doesn't exist. Git complains with:
fatal: couldn't find remote ref FDO/guc_v49
Did you just mean guc_v49?
josh
>
> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>
> i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>
> ----------------------------------------------------------------
> John Harrison (2):
> i915: Remove duplicate KBL DMC entry
> i915: Add GuC firmware v49.0.1 for all platforms
>
> WHENCE | 25 ++++++++++++++++++++++++-
> i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
> i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
> i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
> i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
> 9 files changed, 24 insertions(+), 1 deletion(-)
> create mode 100644 i915/bxt_guc_49.0.1.bin
> create mode 100644 i915/cml_guc_49.0.1.bin
> create mode 100644 i915/ehl_guc_49.0.1.bin
> create mode 100644 i915/glk_guc_49.0.1.bin
> create mode 100644 i915/icl_guc_49.0.1.bin
> create mode 100644 i915/kbl_guc_49.0.1.bin
> create mode 100644 i915/skl_guc_49.0.1.bin
> create mode 100644 i915/tgl_guc_49.0.1.bin
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux firmware PR for i915 GuC v49.0.1
2020-11-30 14:26 ` Josh Boyer
2020-11-30 14:26 ` [Intel-gfx] " Josh Boyer
@ 2020-11-30 18:49 ` John Harrison
2020-11-30 18:49 ` [Intel-gfx] " John Harrison
2020-11-30 19:09 ` Josh Boyer
1 sibling, 2 replies; 10+ messages in thread
From: John Harrison @ 2020-11-30 18:49 UTC (permalink / raw)
To: Josh Boyer
Cc: Linux Firmware, Kyle McMartin, Ben Hutchings, Intel Graphics Development
On 11/30/2020 06:26, Josh Boyer wrote:
> On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>> Hi Josh, Kyle, Ben,
>>
>> Kindly add the below i915 changes to linux-firmware.git:
>>
>>
>> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>>
>> Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>>
>> are available in the Git repository at:
>>
>> git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
> This doesn't exist. Git complains with:
>
> fatal: couldn't find remote ref FDO/guc_v49
>
> Did you just mean guc_v49?
>
> josh
I guess. The FDO part is the name of the remote repo in my local .git.
When I tried to create the pull request without that part it gave me an
error.
Do you need me to resend the email with the 'FDO/' part dropped?
Thanks,
John.
>
>> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>>
>> i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>>
>> ----------------------------------------------------------------
>> John Harrison (2):
>> i915: Remove duplicate KBL DMC entry
>> i915: Add GuC firmware v49.0.1 for all platforms
>>
>> WHENCE | 25 ++++++++++++++++++++++++-
>> i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>> i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>> i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>> i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>> i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>> i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>> i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>> i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>> 9 files changed, 24 insertions(+), 1 deletion(-)
>> create mode 100644 i915/bxt_guc_49.0.1.bin
>> create mode 100644 i915/cml_guc_49.0.1.bin
>> create mode 100644 i915/ehl_guc_49.0.1.bin
>> create mode 100644 i915/glk_guc_49.0.1.bin
>> create mode 100644 i915/icl_guc_49.0.1.bin
>> create mode 100644 i915/kbl_guc_49.0.1.bin
>> create mode 100644 i915/skl_guc_49.0.1.bin
>> create mode 100644 i915/tgl_guc_49.0.1.bin
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
2020-11-30 18:49 ` John Harrison
@ 2020-11-30 18:49 ` John Harrison
2020-11-30 19:09 ` Josh Boyer
1 sibling, 0 replies; 10+ messages in thread
From: John Harrison @ 2020-11-30 18:49 UTC (permalink / raw)
To: Josh Boyer
Cc: Intel Graphics Development, Kyle McMartin, Ben Hutchings, Linux Firmware
On 11/30/2020 06:26, Josh Boyer wrote:
> On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>> Hi Josh, Kyle, Ben,
>>
>> Kindly add the below i915 changes to linux-firmware.git:
>>
>>
>> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>>
>> Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>>
>> are available in the Git repository at:
>>
>> git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
> This doesn't exist. Git complains with:
>
> fatal: couldn't find remote ref FDO/guc_v49
>
> Did you just mean guc_v49?
>
> josh
I guess. The FDO part is the name of the remote repo in my local .git.
When I tried to create the pull request without that part it gave me an
error.
Do you need me to resend the email with the 'FDO/' part dropped?
Thanks,
John.
>
>> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>>
>> i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>>
>> ----------------------------------------------------------------
>> John Harrison (2):
>> i915: Remove duplicate KBL DMC entry
>> i915: Add GuC firmware v49.0.1 for all platforms
>>
>> WHENCE | 25 ++++++++++++++++++++++++-
>> i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>> i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>> i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>> i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>> i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>> i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>> i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>> i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>> 9 files changed, 24 insertions(+), 1 deletion(-)
>> create mode 100644 i915/bxt_guc_49.0.1.bin
>> create mode 100644 i915/cml_guc_49.0.1.bin
>> create mode 100644 i915/ehl_guc_49.0.1.bin
>> create mode 100644 i915/glk_guc_49.0.1.bin
>> create mode 100644 i915/icl_guc_49.0.1.bin
>> create mode 100644 i915/kbl_guc_49.0.1.bin
>> create mode 100644 i915/skl_guc_49.0.1.bin
>> create mode 100644 i915/tgl_guc_49.0.1.bin
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux firmware PR for i915 GuC v49.0.1
2020-11-30 18:49 ` John Harrison
2020-11-30 18:49 ` [Intel-gfx] " John Harrison
@ 2020-11-30 19:09 ` Josh Boyer
2020-11-30 19:09 ` [Intel-gfx] " Josh Boyer
2020-11-30 19:15 ` John Harrison
1 sibling, 2 replies; 10+ messages in thread
From: Josh Boyer @ 2020-11-30 19:09 UTC (permalink / raw)
To: John Harrison
Cc: Linux Firmware, Kyle McMartin, Ben Hutchings, Intel Graphics Development
On Mon, Nov 30, 2020 at 1:49 PM John Harrison <john.c.harrison@intel.com> wrote:
>
> On 11/30/2020 06:26, Josh Boyer wrote:
> > On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
> >> Hi Josh, Kyle, Ben,
> >>
> >> Kindly add the below i915 changes to linux-firmware.git:
> >>
> >>
> >> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
> >>
> >> Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
> >>
> >> are available in the Git repository at:
> >>
> >> git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
> > This doesn't exist. Git complains with:
> >
> > fatal: couldn't find remote ref FDO/guc_v49
> >
> > Did you just mean guc_v49?
> >
> > josh
> I guess. The FDO part is the name of the remote repo in my local .git.
> When I tried to create the pull request without that part it gave me an
> error.
>
> Do you need me to resend the email with the 'FDO/' part dropped?
No. I pulled that tag and pushed it out. Take a look at the mainline
repo and make sure it included the 2 commits you wanted. Should be
good to go.
josh
> >> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
> >>
> >> i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
> >>
> >> ----------------------------------------------------------------
> >> John Harrison (2):
> >> i915: Remove duplicate KBL DMC entry
> >> i915: Add GuC firmware v49.0.1 for all platforms
> >>
> >> WHENCE | 25 ++++++++++++++++++++++++-
> >> i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
> >> i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> >> i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> >> i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
> >> i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> >> i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> >> i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
> >> i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
> >> 9 files changed, 24 insertions(+), 1 deletion(-)
> >> create mode 100644 i915/bxt_guc_49.0.1.bin
> >> create mode 100644 i915/cml_guc_49.0.1.bin
> >> create mode 100644 i915/ehl_guc_49.0.1.bin
> >> create mode 100644 i915/glk_guc_49.0.1.bin
> >> create mode 100644 i915/icl_guc_49.0.1.bin
> >> create mode 100644 i915/kbl_guc_49.0.1.bin
> >> create mode 100644 i915/skl_guc_49.0.1.bin
> >> create mode 100644 i915/tgl_guc_49.0.1.bin
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
2020-11-30 19:09 ` Josh Boyer
@ 2020-11-30 19:09 ` Josh Boyer
2020-11-30 19:15 ` John Harrison
1 sibling, 0 replies; 10+ messages in thread
From: Josh Boyer @ 2020-11-30 19:09 UTC (permalink / raw)
To: John Harrison
Cc: Intel Graphics Development, Kyle McMartin, Ben Hutchings, Linux Firmware
On Mon, Nov 30, 2020 at 1:49 PM John Harrison <john.c.harrison@intel.com> wrote:
>
> On 11/30/2020 06:26, Josh Boyer wrote:
> > On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
> >> Hi Josh, Kyle, Ben,
> >>
> >> Kindly add the below i915 changes to linux-firmware.git:
> >>
> >>
> >> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
> >>
> >> Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
> >>
> >> are available in the Git repository at:
> >>
> >> git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
> > This doesn't exist. Git complains with:
> >
> > fatal: couldn't find remote ref FDO/guc_v49
> >
> > Did you just mean guc_v49?
> >
> > josh
> I guess. The FDO part is the name of the remote repo in my local .git.
> When I tried to create the pull request without that part it gave me an
> error.
>
> Do you need me to resend the email with the 'FDO/' part dropped?
No. I pulled that tag and pushed it out. Take a look at the mainline
repo and make sure it included the 2 commits you wanted. Should be
good to go.
josh
> >> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
> >>
> >> i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
> >>
> >> ----------------------------------------------------------------
> >> John Harrison (2):
> >> i915: Remove duplicate KBL DMC entry
> >> i915: Add GuC firmware v49.0.1 for all platforms
> >>
> >> WHENCE | 25 ++++++++++++++++++++++++-
> >> i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
> >> i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> >> i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> >> i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
> >> i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> >> i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> >> i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
> >> i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
> >> 9 files changed, 24 insertions(+), 1 deletion(-)
> >> create mode 100644 i915/bxt_guc_49.0.1.bin
> >> create mode 100644 i915/cml_guc_49.0.1.bin
> >> create mode 100644 i915/ehl_guc_49.0.1.bin
> >> create mode 100644 i915/glk_guc_49.0.1.bin
> >> create mode 100644 i915/icl_guc_49.0.1.bin
> >> create mode 100644 i915/kbl_guc_49.0.1.bin
> >> create mode 100644 i915/skl_guc_49.0.1.bin
> >> create mode 100644 i915/tgl_guc_49.0.1.bin
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux firmware PR for i915 GuC v49.0.1
2020-11-30 19:09 ` Josh Boyer
2020-11-30 19:09 ` [Intel-gfx] " Josh Boyer
@ 2020-11-30 19:15 ` John Harrison
2020-11-30 19:15 ` [Intel-gfx] " John Harrison
1 sibling, 1 reply; 10+ messages in thread
From: John Harrison @ 2020-11-30 19:15 UTC (permalink / raw)
To: Josh Boyer
Cc: Linux Firmware, Kyle McMartin, Ben Hutchings, Intel Graphics Development
On 11/30/2020 11:09, Josh Boyer wrote:
> On Mon, Nov 30, 2020 at 1:49 PM John Harrison <john.c.harrison@intel.com> wrote:
>> On 11/30/2020 06:26, Josh Boyer wrote:
>>> On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>>>> Hi Josh, Kyle, Ben,
>>>>
>>>> Kindly add the below i915 changes to linux-firmware.git:
>>>>
>>>>
>>>> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>>>>
>>>> Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>> git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
>>> This doesn't exist. Git complains with:
>>>
>>> fatal: couldn't find remote ref FDO/guc_v49
>>>
>>> Did you just mean guc_v49?
>>>
>>> josh
>> I guess. The FDO part is the name of the remote repo in my local .git.
>> When I tried to create the pull request without that part it gave me an
>> error.
>>
>> Do you need me to resend the email with the 'FDO/' part dropped?
> No. I pulled that tag and pushed it out. Take a look at the mainline
> repo and make sure it included the 2 commits you wanted. Should be
> good to go.
>
> josh
Just pulled the tree and it looks good :).
Thank you,
John.
>>>> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>>>>
>>>> i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>>>>
>>>> ----------------------------------------------------------------
>>>> John Harrison (2):
>>>> i915: Remove duplicate KBL DMC entry
>>>> i915: Add GuC firmware v49.0.1 for all platforms
>>>>
>>>> WHENCE | 25 ++++++++++++++++++++++++-
>>>> i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>>>> i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>>> i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>>> i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>>>> i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>>> i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>>> i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>>>> i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>>>> 9 files changed, 24 insertions(+), 1 deletion(-)
>>>> create mode 100644 i915/bxt_guc_49.0.1.bin
>>>> create mode 100644 i915/cml_guc_49.0.1.bin
>>>> create mode 100644 i915/ehl_guc_49.0.1.bin
>>>> create mode 100644 i915/glk_guc_49.0.1.bin
>>>> create mode 100644 i915/icl_guc_49.0.1.bin
>>>> create mode 100644 i915/kbl_guc_49.0.1.bin
>>>> create mode 100644 i915/skl_guc_49.0.1.bin
>>>> create mode 100644 i915/tgl_guc_49.0.1.bin
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
2020-11-30 19:15 ` John Harrison
@ 2020-11-30 19:15 ` John Harrison
0 siblings, 0 replies; 10+ messages in thread
From: John Harrison @ 2020-11-30 19:15 UTC (permalink / raw)
To: Josh Boyer
Cc: Intel Graphics Development, Kyle McMartin, Ben Hutchings, Linux Firmware
On 11/30/2020 11:09, Josh Boyer wrote:
> On Mon, Nov 30, 2020 at 1:49 PM John Harrison <john.c.harrison@intel.com> wrote:
>> On 11/30/2020 06:26, Josh Boyer wrote:
>>> On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>>>> Hi Josh, Kyle, Ben,
>>>>
>>>> Kindly add the below i915 changes to linux-firmware.git:
>>>>
>>>>
>>>> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>>>>
>>>> Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>> git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
>>> This doesn't exist. Git complains with:
>>>
>>> fatal: couldn't find remote ref FDO/guc_v49
>>>
>>> Did you just mean guc_v49?
>>>
>>> josh
>> I guess. The FDO part is the name of the remote repo in my local .git.
>> When I tried to create the pull request without that part it gave me an
>> error.
>>
>> Do you need me to resend the email with the 'FDO/' part dropped?
> No. I pulled that tag and pushed it out. Take a look at the mainline
> repo and make sure it included the 2 commits you wanted. Should be
> good to go.
>
> josh
Just pulled the tree and it looks good :).
Thank you,
John.
>>>> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>>>>
>>>> i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>>>>
>>>> ----------------------------------------------------------------
>>>> John Harrison (2):
>>>> i915: Remove duplicate KBL DMC entry
>>>> i915: Add GuC firmware v49.0.1 for all platforms
>>>>
>>>> WHENCE | 25 ++++++++++++++++++++++++-
>>>> i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>>>> i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>>> i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>>> i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>>>> i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>>> i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>>> i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>>>> i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>>>> 9 files changed, 24 insertions(+), 1 deletion(-)
>>>> create mode 100644 i915/bxt_guc_49.0.1.bin
>>>> create mode 100644 i915/cml_guc_49.0.1.bin
>>>> create mode 100644 i915/ehl_guc_49.0.1.bin
>>>> create mode 100644 i915/glk_guc_49.0.1.bin
>>>> create mode 100644 i915/icl_guc_49.0.1.bin
>>>> create mode 100644 i915/kbl_guc_49.0.1.bin
>>>> create mode 100644 i915/skl_guc_49.0.1.bin
>>>> create mode 100644 i915/tgl_guc_49.0.1.bin
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-11-30 19:15 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-25 1:42 linux firmware PR for i915 GuC v49.0.1 John.C.Harrison
2020-11-25 1:42 ` [Intel-gfx] " John.C.Harrison
2020-11-30 14:26 ` Josh Boyer
2020-11-30 14:26 ` [Intel-gfx] " Josh Boyer
2020-11-30 18:49 ` John Harrison
2020-11-30 18:49 ` [Intel-gfx] " John Harrison
2020-11-30 19:09 ` Josh Boyer
2020-11-30 19:09 ` [Intel-gfx] " Josh Boyer
2020-11-30 19:15 ` John Harrison
2020-11-30 19:15 ` [Intel-gfx] " John Harrison
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).