Linux-Firmware Archive on lore.kernel.org
 help / color / Atom feed
* linux firmware PR for i915 GuC v49.0.1
@ 2020-11-25  1:42 John.C.Harrison
  2020-11-25  1:42 ` [Intel-gfx] " John.C.Harrison
  2020-11-30 14:26 ` Josh Boyer
  0 siblings, 2 replies; 10+ messages in thread
From: John.C.Harrison @ 2020-11-25  1:42 UTC (permalink / raw)
  To: linux-firmware; +Cc: jwboyer, kyle, ben, intel-gfx

Hi Josh, Kyle, Ben,

Kindly add the below i915 changes to linux-firmware.git:


The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:

  Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)

are available in the Git repository at:

  git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49

for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:

  i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)

----------------------------------------------------------------
John Harrison (2):
      i915: Remove duplicate KBL DMC entry
      i915: Add GuC firmware v49.0.1 for all platforms

 WHENCE                  |  25 ++++++++++++++++++++++++-
 i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
 i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
 i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
 i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
 i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
 i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
 i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
 i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
 9 files changed, 24 insertions(+), 1 deletion(-)
 create mode 100644 i915/bxt_guc_49.0.1.bin
 create mode 100644 i915/cml_guc_49.0.1.bin
 create mode 100644 i915/ehl_guc_49.0.1.bin
 create mode 100644 i915/glk_guc_49.0.1.bin
 create mode 100644 i915/icl_guc_49.0.1.bin
 create mode 100644 i915/kbl_guc_49.0.1.bin
 create mode 100644 i915/skl_guc_49.0.1.bin
 create mode 100644 i915/tgl_guc_49.0.1.bin

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
  2020-11-25  1:42 linux firmware PR for i915 GuC v49.0.1 John.C.Harrison
@ 2020-11-25  1:42 ` John.C.Harrison
  2020-11-30 14:26 ` Josh Boyer
  1 sibling, 0 replies; 10+ messages in thread
From: John.C.Harrison @ 2020-11-25  1:42 UTC (permalink / raw)
  To: linux-firmware; +Cc: jwboyer, intel-gfx, kyle, ben

Hi Josh, Kyle, Ben,

Kindly add the below i915 changes to linux-firmware.git:


The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:

  Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)

are available in the Git repository at:

  git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49

for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:

  i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)

----------------------------------------------------------------
John Harrison (2):
      i915: Remove duplicate KBL DMC entry
      i915: Add GuC firmware v49.0.1 for all platforms

 WHENCE                  |  25 ++++++++++++++++++++++++-
 i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
 i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
 i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
 i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
 i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
 i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
 i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
 i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
 9 files changed, 24 insertions(+), 1 deletion(-)
 create mode 100644 i915/bxt_guc_49.0.1.bin
 create mode 100644 i915/cml_guc_49.0.1.bin
 create mode 100644 i915/ehl_guc_49.0.1.bin
 create mode 100644 i915/glk_guc_49.0.1.bin
 create mode 100644 i915/icl_guc_49.0.1.bin
 create mode 100644 i915/kbl_guc_49.0.1.bin
 create mode 100644 i915/skl_guc_49.0.1.bin
 create mode 100644 i915/tgl_guc_49.0.1.bin
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: linux firmware PR for i915 GuC v49.0.1
  2020-11-25  1:42 linux firmware PR for i915 GuC v49.0.1 John.C.Harrison
  2020-11-25  1:42 ` [Intel-gfx] " John.C.Harrison
@ 2020-11-30 14:26 ` Josh Boyer
  2020-11-30 14:26   ` [Intel-gfx] " Josh Boyer
  2020-11-30 18:49   ` John Harrison
  1 sibling, 2 replies; 10+ messages in thread
From: Josh Boyer @ 2020-11-30 14:26 UTC (permalink / raw)
  To: John.C.Harrison
  Cc: Linux Firmware, Kyle McMartin, Ben Hutchings, Intel Graphics Development

On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>
> Hi Josh, Kyle, Ben,
>
> Kindly add the below i915 changes to linux-firmware.git:
>
>
> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>
>   Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>
> are available in the Git repository at:
>
>   git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49

This doesn't exist.  Git complains with:

fatal: couldn't find remote ref FDO/guc_v49

Did you just mean guc_v49?

josh

>
> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>
>   i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>
> ----------------------------------------------------------------
> John Harrison (2):
>       i915: Remove duplicate KBL DMC entry
>       i915: Add GuC firmware v49.0.1 for all platforms
>
>  WHENCE                  |  25 ++++++++++++++++++++++++-
>  i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>  i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>  i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>  i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>  i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>  i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>  i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>  i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>  9 files changed, 24 insertions(+), 1 deletion(-)
>  create mode 100644 i915/bxt_guc_49.0.1.bin
>  create mode 100644 i915/cml_guc_49.0.1.bin
>  create mode 100644 i915/ehl_guc_49.0.1.bin
>  create mode 100644 i915/glk_guc_49.0.1.bin
>  create mode 100644 i915/icl_guc_49.0.1.bin
>  create mode 100644 i915/kbl_guc_49.0.1.bin
>  create mode 100644 i915/skl_guc_49.0.1.bin
>  create mode 100644 i915/tgl_guc_49.0.1.bin

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
  2020-11-30 14:26 ` Josh Boyer
@ 2020-11-30 14:26   ` Josh Boyer
  2020-11-30 18:49   ` John Harrison
  1 sibling, 0 replies; 10+ messages in thread
From: Josh Boyer @ 2020-11-30 14:26 UTC (permalink / raw)
  To: John.C.Harrison
  Cc: Intel Graphics Development, Kyle McMartin, Ben Hutchings, Linux Firmware

On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>
> Hi Josh, Kyle, Ben,
>
> Kindly add the below i915 changes to linux-firmware.git:
>
>
> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>
>   Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>
> are available in the Git repository at:
>
>   git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49

This doesn't exist.  Git complains with:

fatal: couldn't find remote ref FDO/guc_v49

Did you just mean guc_v49?

josh

>
> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>
>   i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>
> ----------------------------------------------------------------
> John Harrison (2):
>       i915: Remove duplicate KBL DMC entry
>       i915: Add GuC firmware v49.0.1 for all platforms
>
>  WHENCE                  |  25 ++++++++++++++++++++++++-
>  i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>  i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>  i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>  i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>  i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>  i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>  i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>  i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>  9 files changed, 24 insertions(+), 1 deletion(-)
>  create mode 100644 i915/bxt_guc_49.0.1.bin
>  create mode 100644 i915/cml_guc_49.0.1.bin
>  create mode 100644 i915/ehl_guc_49.0.1.bin
>  create mode 100644 i915/glk_guc_49.0.1.bin
>  create mode 100644 i915/icl_guc_49.0.1.bin
>  create mode 100644 i915/kbl_guc_49.0.1.bin
>  create mode 100644 i915/skl_guc_49.0.1.bin
>  create mode 100644 i915/tgl_guc_49.0.1.bin
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: linux firmware PR for i915 GuC v49.0.1
  2020-11-30 14:26 ` Josh Boyer
  2020-11-30 14:26   ` [Intel-gfx] " Josh Boyer
@ 2020-11-30 18:49   ` John Harrison
  2020-11-30 18:49     ` [Intel-gfx] " John Harrison
  2020-11-30 19:09     ` Josh Boyer
  1 sibling, 2 replies; 10+ messages in thread
From: John Harrison @ 2020-11-30 18:49 UTC (permalink / raw)
  To: Josh Boyer
  Cc: Linux Firmware, Kyle McMartin, Ben Hutchings, Intel Graphics Development

On 11/30/2020 06:26, Josh Boyer wrote:
> On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>> Hi Josh, Kyle, Ben,
>>
>> Kindly add the below i915 changes to linux-firmware.git:
>>
>>
>> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>>
>>    Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>>
>> are available in the Git repository at:
>>
>>    git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
> This doesn't exist.  Git complains with:
>
> fatal: couldn't find remote ref FDO/guc_v49
>
> Did you just mean guc_v49?
>
> josh
I guess. The FDO part is the name of the remote repo in my local .git. 
When I tried to create the pull request without that part it gave me an 
error.

Do you need me to resend the email with the 'FDO/' part dropped?

Thanks,
John.



>
>> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>>
>>    i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>>
>> ----------------------------------------------------------------
>> John Harrison (2):
>>        i915: Remove duplicate KBL DMC entry
>>        i915: Add GuC firmware v49.0.1 for all platforms
>>
>>   WHENCE                  |  25 ++++++++++++++++++++++++-
>>   i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>>   i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>   i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>   i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>>   i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>   i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>   i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>>   i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>>   9 files changed, 24 insertions(+), 1 deletion(-)
>>   create mode 100644 i915/bxt_guc_49.0.1.bin
>>   create mode 100644 i915/cml_guc_49.0.1.bin
>>   create mode 100644 i915/ehl_guc_49.0.1.bin
>>   create mode 100644 i915/glk_guc_49.0.1.bin
>>   create mode 100644 i915/icl_guc_49.0.1.bin
>>   create mode 100644 i915/kbl_guc_49.0.1.bin
>>   create mode 100644 i915/skl_guc_49.0.1.bin
>>   create mode 100644 i915/tgl_guc_49.0.1.bin


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
  2020-11-30 18:49   ` John Harrison
@ 2020-11-30 18:49     ` John Harrison
  2020-11-30 19:09     ` Josh Boyer
  1 sibling, 0 replies; 10+ messages in thread
From: John Harrison @ 2020-11-30 18:49 UTC (permalink / raw)
  To: Josh Boyer
  Cc: Intel Graphics Development, Kyle McMartin, Ben Hutchings, Linux Firmware

On 11/30/2020 06:26, Josh Boyer wrote:
> On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>> Hi Josh, Kyle, Ben,
>>
>> Kindly add the below i915 changes to linux-firmware.git:
>>
>>
>> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>>
>>    Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>>
>> are available in the Git repository at:
>>
>>    git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
> This doesn't exist.  Git complains with:
>
> fatal: couldn't find remote ref FDO/guc_v49
>
> Did you just mean guc_v49?
>
> josh
I guess. The FDO part is the name of the remote repo in my local .git. 
When I tried to create the pull request without that part it gave me an 
error.

Do you need me to resend the email with the 'FDO/' part dropped?

Thanks,
John.



>
>> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>>
>>    i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>>
>> ----------------------------------------------------------------
>> John Harrison (2):
>>        i915: Remove duplicate KBL DMC entry
>>        i915: Add GuC firmware v49.0.1 for all platforms
>>
>>   WHENCE                  |  25 ++++++++++++++++++++++++-
>>   i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>>   i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>   i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>   i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>>   i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>   i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>   i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>>   i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>>   9 files changed, 24 insertions(+), 1 deletion(-)
>>   create mode 100644 i915/bxt_guc_49.0.1.bin
>>   create mode 100644 i915/cml_guc_49.0.1.bin
>>   create mode 100644 i915/ehl_guc_49.0.1.bin
>>   create mode 100644 i915/glk_guc_49.0.1.bin
>>   create mode 100644 i915/icl_guc_49.0.1.bin
>>   create mode 100644 i915/kbl_guc_49.0.1.bin
>>   create mode 100644 i915/skl_guc_49.0.1.bin
>>   create mode 100644 i915/tgl_guc_49.0.1.bin

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: linux firmware PR for i915 GuC v49.0.1
  2020-11-30 18:49   ` John Harrison
  2020-11-30 18:49     ` [Intel-gfx] " John Harrison
@ 2020-11-30 19:09     ` Josh Boyer
  2020-11-30 19:09       ` [Intel-gfx] " Josh Boyer
  2020-11-30 19:15       ` John Harrison
  1 sibling, 2 replies; 10+ messages in thread
From: Josh Boyer @ 2020-11-30 19:09 UTC (permalink / raw)
  To: John Harrison
  Cc: Linux Firmware, Kyle McMartin, Ben Hutchings, Intel Graphics Development

On Mon, Nov 30, 2020 at 1:49 PM John Harrison <john.c.harrison@intel.com> wrote:
>
> On 11/30/2020 06:26, Josh Boyer wrote:
> > On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
> >> Hi Josh, Kyle, Ben,
> >>
> >> Kindly add the below i915 changes to linux-firmware.git:
> >>
> >>
> >> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
> >>
> >>    Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
> >>
> >> are available in the Git repository at:
> >>
> >>    git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
> > This doesn't exist.  Git complains with:
> >
> > fatal: couldn't find remote ref FDO/guc_v49
> >
> > Did you just mean guc_v49?
> >
> > josh
> I guess. The FDO part is the name of the remote repo in my local .git.
> When I tried to create the pull request without that part it gave me an
> error.
>
> Do you need me to resend the email with the 'FDO/' part dropped?

No.  I pulled that tag and pushed it out.  Take a look at the mainline
repo and make sure it included the 2 commits you wanted.  Should be
good to go.

josh

> >> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
> >>
> >>    i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
> >>
> >> ----------------------------------------------------------------
> >> John Harrison (2):
> >>        i915: Remove duplicate KBL DMC entry
> >>        i915: Add GuC firmware v49.0.1 for all platforms
> >>
> >>   WHENCE                  |  25 ++++++++++++++++++++++++-
> >>   i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
> >>   i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> >>   i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> >>   i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
> >>   i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> >>   i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> >>   i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
> >>   i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
> >>   9 files changed, 24 insertions(+), 1 deletion(-)
> >>   create mode 100644 i915/bxt_guc_49.0.1.bin
> >>   create mode 100644 i915/cml_guc_49.0.1.bin
> >>   create mode 100644 i915/ehl_guc_49.0.1.bin
> >>   create mode 100644 i915/glk_guc_49.0.1.bin
> >>   create mode 100644 i915/icl_guc_49.0.1.bin
> >>   create mode 100644 i915/kbl_guc_49.0.1.bin
> >>   create mode 100644 i915/skl_guc_49.0.1.bin
> >>   create mode 100644 i915/tgl_guc_49.0.1.bin
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
  2020-11-30 19:09     ` Josh Boyer
@ 2020-11-30 19:09       ` Josh Boyer
  2020-11-30 19:15       ` John Harrison
  1 sibling, 0 replies; 10+ messages in thread
From: Josh Boyer @ 2020-11-30 19:09 UTC (permalink / raw)
  To: John Harrison
  Cc: Intel Graphics Development, Kyle McMartin, Ben Hutchings, Linux Firmware

On Mon, Nov 30, 2020 at 1:49 PM John Harrison <john.c.harrison@intel.com> wrote:
>
> On 11/30/2020 06:26, Josh Boyer wrote:
> > On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
> >> Hi Josh, Kyle, Ben,
> >>
> >> Kindly add the below i915 changes to linux-firmware.git:
> >>
> >>
> >> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
> >>
> >>    Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
> >>
> >> are available in the Git repository at:
> >>
> >>    git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
> > This doesn't exist.  Git complains with:
> >
> > fatal: couldn't find remote ref FDO/guc_v49
> >
> > Did you just mean guc_v49?
> >
> > josh
> I guess. The FDO part is the name of the remote repo in my local .git.
> When I tried to create the pull request without that part it gave me an
> error.
>
> Do you need me to resend the email with the 'FDO/' part dropped?

No.  I pulled that tag and pushed it out.  Take a look at the mainline
repo and make sure it included the 2 commits you wanted.  Should be
good to go.

josh

> >> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
> >>
> >>    i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
> >>
> >> ----------------------------------------------------------------
> >> John Harrison (2):
> >>        i915: Remove duplicate KBL DMC entry
> >>        i915: Add GuC firmware v49.0.1 for all platforms
> >>
> >>   WHENCE                  |  25 ++++++++++++++++++++++++-
> >>   i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
> >>   i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> >>   i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> >>   i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
> >>   i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
> >>   i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
> >>   i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
> >>   i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
> >>   9 files changed, 24 insertions(+), 1 deletion(-)
> >>   create mode 100644 i915/bxt_guc_49.0.1.bin
> >>   create mode 100644 i915/cml_guc_49.0.1.bin
> >>   create mode 100644 i915/ehl_guc_49.0.1.bin
> >>   create mode 100644 i915/glk_guc_49.0.1.bin
> >>   create mode 100644 i915/icl_guc_49.0.1.bin
> >>   create mode 100644 i915/kbl_guc_49.0.1.bin
> >>   create mode 100644 i915/skl_guc_49.0.1.bin
> >>   create mode 100644 i915/tgl_guc_49.0.1.bin
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: linux firmware PR for i915 GuC v49.0.1
  2020-11-30 19:09     ` Josh Boyer
  2020-11-30 19:09       ` [Intel-gfx] " Josh Boyer
@ 2020-11-30 19:15       ` John Harrison
  2020-11-30 19:15         ` [Intel-gfx] " John Harrison
  1 sibling, 1 reply; 10+ messages in thread
From: John Harrison @ 2020-11-30 19:15 UTC (permalink / raw)
  To: Josh Boyer
  Cc: Linux Firmware, Kyle McMartin, Ben Hutchings, Intel Graphics Development

On 11/30/2020 11:09, Josh Boyer wrote:
> On Mon, Nov 30, 2020 at 1:49 PM John Harrison <john.c.harrison@intel.com> wrote:
>> On 11/30/2020 06:26, Josh Boyer wrote:
>>> On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>>>> Hi Josh, Kyle, Ben,
>>>>
>>>> Kindly add the below i915 changes to linux-firmware.git:
>>>>
>>>>
>>>> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>>>>
>>>>     Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>>     git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
>>> This doesn't exist.  Git complains with:
>>>
>>> fatal: couldn't find remote ref FDO/guc_v49
>>>
>>> Did you just mean guc_v49?
>>>
>>> josh
>> I guess. The FDO part is the name of the remote repo in my local .git.
>> When I tried to create the pull request without that part it gave me an
>> error.
>>
>> Do you need me to resend the email with the 'FDO/' part dropped?
> No.  I pulled that tag and pushed it out.  Take a look at the mainline
> repo and make sure it included the 2 commits you wanted.  Should be
> good to go.
>
> josh
Just pulled the tree and it looks good :).

Thank you,
John.


>>>> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>>>>
>>>>     i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>>>>
>>>> ----------------------------------------------------------------
>>>> John Harrison (2):
>>>>         i915: Remove duplicate KBL DMC entry
>>>>         i915: Add GuC firmware v49.0.1 for all platforms
>>>>
>>>>    WHENCE                  |  25 ++++++++++++++++++++++++-
>>>>    i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>>>>    i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>>>    i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>>>    i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>>>>    i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>>>    i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>>>    i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>>>>    i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>>>>    9 files changed, 24 insertions(+), 1 deletion(-)
>>>>    create mode 100644 i915/bxt_guc_49.0.1.bin
>>>>    create mode 100644 i915/cml_guc_49.0.1.bin
>>>>    create mode 100644 i915/ehl_guc_49.0.1.bin
>>>>    create mode 100644 i915/glk_guc_49.0.1.bin
>>>>    create mode 100644 i915/icl_guc_49.0.1.bin
>>>>    create mode 100644 i915/kbl_guc_49.0.1.bin
>>>>    create mode 100644 i915/skl_guc_49.0.1.bin
>>>>    create mode 100644 i915/tgl_guc_49.0.1.bin


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Intel-gfx] linux firmware PR for i915 GuC v49.0.1
  2020-11-30 19:15       ` John Harrison
@ 2020-11-30 19:15         ` John Harrison
  0 siblings, 0 replies; 10+ messages in thread
From: John Harrison @ 2020-11-30 19:15 UTC (permalink / raw)
  To: Josh Boyer
  Cc: Intel Graphics Development, Kyle McMartin, Ben Hutchings, Linux Firmware

On 11/30/2020 11:09, Josh Boyer wrote:
> On Mon, Nov 30, 2020 at 1:49 PM John Harrison <john.c.harrison@intel.com> wrote:
>> On 11/30/2020 06:26, Josh Boyer wrote:
>>> On Tue, Nov 24, 2020 at 8:42 PM <John.C.Harrison@intel.com> wrote:
>>>> Hi Josh, Kyle, Ben,
>>>>
>>>> Kindly add the below i915 changes to linux-firmware.git:
>>>>
>>>>
>>>> The following changes since commit b362fd4cb8963ad75517dbcf424974f65a29a60e:
>>>>
>>>>     Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 (2020-11-24 09:55:03 -0500)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>>     git://anongit.freedesktop.org/drm/drm-firmware FDO/guc_v49
>>> This doesn't exist.  Git complains with:
>>>
>>> fatal: couldn't find remote ref FDO/guc_v49
>>>
>>> Did you just mean guc_v49?
>>>
>>> josh
>> I guess. The FDO part is the name of the remote repo in my local .git.
>> When I tried to create the pull request without that part it gave me an
>> error.
>>
>> Do you need me to resend the email with the 'FDO/' part dropped?
> No.  I pulled that tag and pushed it out.  Take a look at the mainline
> repo and make sure it included the 2 commits you wanted.  Should be
> good to go.
>
> josh
Just pulled the tree and it looks good :).

Thank you,
John.


>>>> for you to fetch changes up to c487f7dadcd21116613441ed355b764003b3f57b:
>>>>
>>>>     i915: Add GuC firmware v49.0.1 for all platforms (2020-11-24 17:04:17 -0800)
>>>>
>>>> ----------------------------------------------------------------
>>>> John Harrison (2):
>>>>         i915: Remove duplicate KBL DMC entry
>>>>         i915: Add GuC firmware v49.0.1 for all platforms
>>>>
>>>>    WHENCE                  |  25 ++++++++++++++++++++++++-
>>>>    i915/bxt_guc_49.0.1.bin | Bin 0 -> 196224 bytes
>>>>    i915/cml_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>>>    i915/ehl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>>>    i915/glk_guc_49.0.1.bin | Bin 0 -> 196672 bytes
>>>>    i915/icl_guc_49.0.1.bin | Bin 0 -> 324160 bytes
>>>>    i915/kbl_guc_49.0.1.bin | Bin 0 -> 197184 bytes
>>>>    i915/skl_guc_49.0.1.bin | Bin 0 -> 196288 bytes
>>>>    i915/tgl_guc_49.0.1.bin | Bin 0 -> 321792 bytes
>>>>    9 files changed, 24 insertions(+), 1 deletion(-)
>>>>    create mode 100644 i915/bxt_guc_49.0.1.bin
>>>>    create mode 100644 i915/cml_guc_49.0.1.bin
>>>>    create mode 100644 i915/ehl_guc_49.0.1.bin
>>>>    create mode 100644 i915/glk_guc_49.0.1.bin
>>>>    create mode 100644 i915/icl_guc_49.0.1.bin
>>>>    create mode 100644 i915/kbl_guc_49.0.1.bin
>>>>    create mode 100644 i915/skl_guc_49.0.1.bin
>>>>    create mode 100644 i915/tgl_guc_49.0.1.bin

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-25  1:42 linux firmware PR for i915 GuC v49.0.1 John.C.Harrison
2020-11-25  1:42 ` [Intel-gfx] " John.C.Harrison
2020-11-30 14:26 ` Josh Boyer
2020-11-30 14:26   ` [Intel-gfx] " Josh Boyer
2020-11-30 18:49   ` John Harrison
2020-11-30 18:49     ` [Intel-gfx] " John Harrison
2020-11-30 19:09     ` Josh Boyer
2020-11-30 19:09       ` [Intel-gfx] " Josh Boyer
2020-11-30 19:15       ` John Harrison
2020-11-30 19:15         ` [Intel-gfx] " John Harrison

Linux-Firmware Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-firmware/0 linux-firmware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-firmware linux-firmware/ https://lore.kernel.org/linux-firmware \
		linux-firmware@kernel.org
	public-inbox-index linux-firmware

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.lore.linux-firmware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git