linux-fpga.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alan Tull <atull@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Moritz Fischer <mdf@kernel.org>, Alan Tull <atull@kernel.org>,
	linux-kernel@vger.kernel.org, linux-fpga@vger.kernel.org,
	Anatolij Gustschin <agust@denx.de>
Subject: [PATCH 2/2] fpga: mgr: altera-ps-spi: enable usage on non-dt platforms
Date: Mon, 26 Nov 2018 11:35:28 -0600	[thread overview]
Message-ID: <1543253728-26542-3-git-send-email-atull@kernel.org> (raw)
In-Reply-To: <1543253728-26542-1-git-send-email-atull@kernel.org>

From: Anatolij Gustschin <agust@denx.de>

Driver probing fails on non-dt platforms since of_match_device()
always returns NULL here. Add spi ids with device names and
matching driver data as an index of a map array with data for
supported devices. Add this map array and a function for mapping
spi ids to driver data. This allows driver binding to dynamically
added PS-SPI devices (e.g. when added via spi_new_device() after
hot-plugging).

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Alan Tull <atull@kernel.org>
---
 drivers/fpga/altera-ps-spi.c | 40 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 35 insertions(+), 5 deletions(-)

diff --git a/drivers/fpga/altera-ps-spi.c b/drivers/fpga/altera-ps-spi.c
index 33aafda..8c18bee 100644
--- a/drivers/fpga/altera-ps-spi.c
+++ b/drivers/fpga/altera-ps-spi.c
@@ -75,6 +75,12 @@ static struct altera_ps_data a10_data = {
 	.t_st2ck_us = 10, /* min(t_ST2CK) */
 };
 
+/* Array index is enum altera_ps_devtype */
+static const struct altera_ps_data *altera_ps_data_map[] = {
+	&c5_data,
+	&a10_data,
+};
+
 static const struct of_device_id of_ef_match[] = {
 	{ .compatible = "altr,fpga-passive-serial", .data = &c5_data },
 	{ .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data },
@@ -234,6 +240,22 @@ static const struct fpga_manager_ops altera_ps_ops = {
 	.write_complete = altera_ps_write_complete,
 };
 
+static const struct altera_ps_data *id_to_data(const struct spi_device_id *id)
+{
+	kernel_ulong_t devtype = id->driver_data;
+	const struct altera_ps_data *data;
+
+	/* someone added a altera_ps_devtype without adding to the map array */
+	if (devtype >= ARRAY_SIZE(altera_ps_data_map))
+		return NULL;
+
+	data = altera_ps_data_map[devtype];
+	if (!data || data->devtype != devtype)
+		return NULL;
+
+	return data;
+}
+
 static int altera_ps_probe(struct spi_device *spi)
 {
 	struct altera_ps_conf *conf;
@@ -244,11 +266,17 @@ static int altera_ps_probe(struct spi_device *spi)
 	if (!conf)
 		return -ENOMEM;
 
-	of_id = of_match_device(of_ef_match, &spi->dev);
-	if (!of_id)
-		return -ENODEV;
+	if (spi->dev.of_node) {
+		of_id = of_match_device(of_ef_match, &spi->dev);
+		if (!of_id)
+			return -ENODEV;
+		conf->data = of_id->data;
+	} else {
+		conf->data = id_to_data(spi_get_device_id(spi));
+		if (!conf->data)
+			return -ENODEV;
+	}
 
-	conf->data = of_id->data;
 	conf->spi = spi;
 	conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW);
 	if (IS_ERR(conf->config)) {
@@ -294,7 +322,9 @@ static int altera_ps_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id altera_ps_spi_ids[] = {
-	{"cyclone-ps-spi", 0},
+	{ "cyclone-ps-spi", CYCLONE5 },
+	{ "fpga-passive-serial", CYCLONE5 },
+	{ "fpga-arria10-passive-serial", ARRIA10 },
 	{}
 };
 MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids);
-- 
2.7.4

      parent reply	other threads:[~2018-11-26 17:35 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-26 17:35 [PATCH 0/2] patches for FPGA Alan Tull
2018-11-26 17:35 ` [PATCH 1/2] fpga: altera-cvp: fix probing for multiple FPGAs on the bus Alan Tull
2018-11-26 17:35 ` Alan Tull [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1543253728-26542-3-git-send-email-atull@kernel.org \
    --to=atull@kernel.org \
    --cc=agust@denx.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mdf@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).