[PATCH v8 1/5] drivers: firmware: Add PDI load API support

From: Nava kishore Manne <nava.manne@xilinx.com>
To: <robh+dt@kernel.org>, <michal.simek@xilinx.com>, <mdf@kernel.org>,
	<trix@redhat.com>, <nava.manne@xilinx.com>, <arnd@arndb.de>,
	<rajan.vaja@xilinx.com>, <gregkh@linuxfoundation.org>,
	<amit.sunil.dhamne@xilinx.com>, <tejas.patel@xilinx.com>,
	<zou_wei@huawei.com>, <lakshmi.sai.krishna.potthuri@xilinx.com>,
	<ravi.patel@xilinx.com>, <iwamatsu@nigauri.org>,
	<wendy.liang@xilinx.com>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-fpga@vger.kernel.org>,
	<git@xilinx.com>, <chinnikishore369@gmail.com>
Subject: [PATCH v8 1/5] drivers: firmware: Add PDI load API support
Date: Sat, 26 Jun 2021 21:22:44 +0530	[thread overview]
Message-ID: <20210626155248.5004-2-nava.manne@xilinx.com> (raw)
In-Reply-To: <20210626155248.5004-1-nava.manne@xilinx.com>

This patch adds load PDI API support to enable full/partial PDI loading
from linux. Programmable Device Image (PDI) is combination of headers,
images and bitstream files to be loaded.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
---
Changes for v2:
              -Updated API Doc and commit msg.
               No functional changes.

Changes for v3:
              -None.

Changes for v4:
              -Rebased the changes on linux-next.
               No functional changes

Changes for v5:
              -None.

Changes for v6:
              -None.

Changes for v7:
              -None.

Changes for v8:
               -None.

 drivers/firmware/xilinx/zynqmp.c     | 17 +++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 10 ++++++++++
 2 files changed, 27 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 15b138326ecc..2db571da9ad8 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -1011,6 +1011,23 @@ int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_set_requirement);
 
+/**
+ * zynqmp_pm_load_pdi - Load and process PDI
+ * @src:       Source device where PDI is located
+ * @address:   PDI src address
+ *
+ * This function provides support to load PDI from linux
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_load_pdi(const u32 src, const u64 address)
+{
+	return zynqmp_pm_invoke_fn(PM_LOAD_PDI, src,
+				   lower_32_bits(address),
+				   upper_32_bits(address), 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_load_pdi);
+
 /**
  * zynqmp_pm_aes - Access AES hardware to encrypt/decrypt the data using
  * AES-GCM core.
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 9d1a5c175065..56b426fe020c 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -52,6 +52,10 @@
 #define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
 #define	ZYNQMP_PM_CAPABILITY_UNUSABLE	0x8U
 
+/* Loader commands */
+#define PM_LOAD_PDI	0x701
+#define PDI_SRC_DDR	0xF
+
 /*
  * Firmware FPGA Manager flags
  * XILINX_ZYNQMP_PM_FPGA_FULL:	FPGA full reconfiguration
@@ -411,6 +415,7 @@ int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
 				 u32 *value);
 int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
 				 u32 value);
+int zynqmp_pm_load_pdi(const u32 src, const u64 address);
 #else
 static inline int zynqmp_pm_get_api_version(u32 *version)
 {
@@ -622,6 +627,11 @@ static inline int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
 {
 	return -ENODEV;
 }
+
+static inline int zynqmp_pm_load_pdi(const u32 src, const u64 address)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */
-- 
2.17.1

