From: "Martin Hundebøll" <martin@geanix.com>
To: Wu Hao <hao.wu@intel.com>, Tom Rix <trix@redhat.com>,
Moritz Fischer <mdf@kernel.org>, Xu Yilun <yilun.xu@intel.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Mark Brown <broonie@kernel.org>
Cc: "Martin Hundebøll" <mhu@silicom.dk>,
linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-spi@vger.kernel.org
Subject: [PATCH v5 3/3] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
Date: Fri, 16 Jul 2021 15:54:41 +0200 [thread overview]
Message-ID: <20210716135441.3235863-4-martin@geanix.com> (raw)
In-Reply-To: <20210716135441.3235863-1-martin@geanix.com>
From: Martin Hundebøll <mhu@silicom.dk>
Add the list of sensors supported by the Silicom n5010 PAC, and enable
the drivers as a subtype of the intel-m10-bmc multi-function driver.
Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
---
Changes since v4:
* None
Changes since v3:
* None
Changes since v2:
* Added Yilun's Reviewed-by
* Added Moritz' Reviewed-by
* Added Guenter's Reviewed-by
Changes since v1:
* Patch split out to separate hwmon changes
drivers/hwmon/intel-m10-bmc-hwmon.c | 116 ++++++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/drivers/hwmon/intel-m10-bmc-hwmon.c b/drivers/hwmon/intel-m10-bmc-hwmon.c
index bd7ed2ed3a1e..7a08e4c44a4b 100644
--- a/drivers/hwmon/intel-m10-bmc-hwmon.c
+++ b/drivers/hwmon/intel-m10-bmc-hwmon.c
@@ -228,6 +228,118 @@ static const struct m10bmc_hwmon_board_data d5005bmc_hwmon_bdata = {
.hinfo = d5005bmc_hinfo,
};
+static const struct m10bmc_sdata n5010bmc_temp_tbl[] = {
+ { 0x100, 0x0, 0x104, 0x0, 0x0, 1000, "Board Local Temperature" },
+ { 0x108, 0x0, 0x10c, 0x0, 0x0, 1000, "FPGA 1 Temperature" },
+ { 0x110, 0x0, 0x114, 0x0, 0x0, 1000, "FPGA 2 Temperature" },
+ { 0x118, 0x0, 0x0, 0x0, 0x0, 1000, "Card Top Temperature" },
+ { 0x11c, 0x0, 0x0, 0x0, 0x0, 1000, "Card Bottom Temperature" },
+ { 0x128, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 1.2V Temperature" },
+ { 0x134, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 5V Temperature" },
+ { 0x140, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.9V Temperature" },
+ { 0x14c, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.85V Temperature" },
+ { 0x158, 0x0, 0x0, 0x0, 0x0, 1000, "AUX 12V Temperature" },
+ { 0x164, 0x0, 0x0, 0x0, 0x0, 1000, "Backplane 12V Temperature" },
+ { 0x1a8, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-1 Temperature" },
+ { 0x1ac, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-2 Temperature" },
+ { 0x1b0, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-3 Temperature" },
+ { 0x1b4, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-4 Temperature" },
+ { 0x1b8, 0x0, 0x0, 0x0, 0x0, 1000, "CVL1 Internal Temperature" },
+ { 0x1bc, 0x0, 0x0, 0x0, 0x0, 1000, "CVL2 Internal Temperature" },
+};
+
+static const struct m10bmc_sdata n5010bmc_in_tbl[] = {
+ { 0x120, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Voltage" },
+ { 0x12c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Voltage" },
+ { 0x138, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Voltage" },
+ { 0x144, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Voltage" },
+ { 0x150, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Voltage" },
+ { 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Voltage" },
+ { 0x16c, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Voltage" },
+ { 0x17c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Voltage" },
+ { 0x184, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Voltage" },
+ { 0x18c, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Voltage" },
+ { 0x194, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Voltage" },
+ { 0x19c, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Voltage" },
+ { 0x1a4, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Voltage" },
+};
+
+static const struct m10bmc_sdata n5010bmc_curr_tbl[] = {
+ { 0x124, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Current" },
+ { 0x130, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Current" },
+ { 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Current" },
+ { 0x148, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Current" },
+ { 0x154, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Current" },
+ { 0x160, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Current" },
+ { 0x168, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Current" },
+ { 0x178, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Current" },
+ { 0x180, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Current" },
+ { 0x188, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Current" },
+ { 0x190, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Current" },
+ { 0x198, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Current" },
+ { 0x1a0, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Current" },
+};
+
+static const struct hwmon_channel_info *n5010bmc_hinfo[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL),
+ HWMON_CHANNEL_INFO(curr,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL),
+ NULL
+};
+
+static const struct m10bmc_hwmon_board_data n5010bmc_hwmon_bdata = {
+ .tables = {
+ [hwmon_temp] = n5010bmc_temp_tbl,
+ [hwmon_in] = n5010bmc_in_tbl,
+ [hwmon_curr] = n5010bmc_curr_tbl,
+ },
+
+ .hinfo = n5010bmc_hinfo,
+};
+
static umode_t
m10bmc_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
u32 attr, int channel)
@@ -438,6 +550,10 @@ static const struct platform_device_id intel_m10bmc_hwmon_ids[] = {
.name = "d5005bmc-hwmon",
.driver_data = (unsigned long)&d5005bmc_hwmon_bdata,
},
+ {
+ .name = "n5010bmc-hwmon",
+ .driver_data = (unsigned long)&n5010bmc_hwmon_bdata,
+ },
{ }
};
--
2.31.0
next prev parent reply other threads:[~2021-07-16 13:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-16 13:54 [PATCH v5 0/3] fpga/spi/hwmon: Initial support for Silicom N5010 PAC Martin Hundebøll
2021-07-16 13:54 ` [PATCH v5 1/3] fpga: dfl: expose feature revision from struct dfl_device Martin Hundebøll
2021-07-16 20:46 ` Tom Rix
2021-07-29 20:04 ` Moritz Fischer
2021-07-16 13:54 ` [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision Martin Hundebøll
2021-07-16 17:33 ` Mark Brown
2021-07-17 23:56 ` Moritz Fischer
2021-07-16 20:44 ` Tom Rix
2021-07-29 20:05 ` Moritz Fischer
2021-07-16 13:54 ` Martin Hundebøll [this message]
2021-07-17 14:02 ` [PATCH v5 3/3] hwmon: intel-m10-bmc-hwmon: add n5010 sensors Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210716135441.3235863-4-martin@geanix.com \
--to=martin@geanix.com \
--cc=broonie@kernel.org \
--cc=hao.wu@intel.com \
--cc=jdelvare@suse.com \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mdf@kernel.org \
--cc=mhu@silicom.dk \
--cc=trix@redhat.com \
--cc=yilun.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).