linux-fpga.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: trix@redhat.com
Cc: yilun.xu@intel.com, hao.wu@intel.com, mdf@kernel.org,
	linux-kernel@vger.kernel.org, linux-fpga@vger.kernel.org
Subject: Re: [RFC] fpga: dfl: a prototype uio driver
Date: Mon, 7 Dec 2020 09:02:25 +0100	[thread overview]
Message-ID: <X83hkdgrMysGuUdL@kroah.com> (raw)
In-Reply-To: <20201206215554.350230-1-trix@redhat.com>

On Sun, Dec 06, 2020 at 01:55:54PM -0800, trix@redhat.com wrote:
> From: Tom Rix <trix@redhat.com>
> 
> >From [PATCH 0/2] UIO support for dfl devices
> https://lore.kernel.org/linux-fpga/1602828151-24784-1-git-send-email-yilun.xu@intel.com/

Why is this here?
> 
> Here is an idea to have uio support with no driver override.
> 
> This makes UIO the primary driver interface because every feature
> will have one and makes the existing platform driver interface
> secondary.  There will be a new burden for locking write access when
> they compete.
> 
> Example shows finding the fpga's temperture.
> 
> Signed-off-by: Tom Rix <trix@redhat.com>
> ---
>  drivers/fpga/dfl-fme-main.c |  9 +++-
>  drivers/fpga/dfl-uio.c      | 96 +++++++++++++++++++++++++++++++++++++
>  drivers/fpga/dfl.c          | 44 ++++++++++++++++-
>  drivers/fpga/dfl.h          |  9 ++++
>  uio.c                       | 56 ++++++++++++++++++++++
>  5 files changed, 212 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/fpga/dfl-uio.c
>  create mode 100644 uio.c
> 
> diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> index 037dc4f946f0..3323e90a18c4 100644
> --- a/drivers/fpga/dfl-fme-main.c
> +++ b/drivers/fpga/dfl-fme-main.c
> @@ -709,12 +709,18 @@ static int fme_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto dev_destroy;
>  
> -	ret = dfl_fpga_dev_ops_register(pdev, &fme_fops, THIS_MODULE);
> +	ret = dfl_fpga_dev_feature_init_uio(pdev, DFH_TYPE_FIU);
>  	if (ret)
>  		goto feature_uinit;
>  
> +	ret = dfl_fpga_dev_ops_register(pdev, &fme_fops, THIS_MODULE);
> +	if (ret)
> +		goto feature_uinit_uio;
> +
>  	return 0;
>  
> +feature_uinit_uio:
> +	dfl_fpga_dev_feature_uinit_uio(pdev, DFH_TYPE_FIU);
>  feature_uinit:
>  	dfl_fpga_dev_feature_uinit(pdev);
>  dev_destroy:
> @@ -726,6 +732,7 @@ exit:
>  static int fme_remove(struct platform_device *pdev)
>  {
>  	dfl_fpga_dev_ops_unregister(pdev);
> +	dfl_fpga_dev_feature_uinit_uio(pdev, DFH_TYPE_FIU);
>  	dfl_fpga_dev_feature_uinit(pdev);
>  	fme_dev_destroy(pdev);
>  
> diff --git a/drivers/fpga/dfl-uio.c b/drivers/fpga/dfl-uio.c
> new file mode 100644
> index 000000000000..7610ee0b19dc
> --- /dev/null
> +++ b/drivers/fpga/dfl-uio.c
> @@ -0,0 +1,96 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * prototype dfl uio driver
> + *
> + * Copyright Tom Rix 2020
> + */
> +#include <linux/module.h>
> +#include "dfl.h"
> +
> +static irqreturn_t dfl_uio_handler(int irq, struct uio_info *info)
> +{
> +	return IRQ_HANDLED;
> +}
> +
> +static int dfl_uio_mmap(struct uio_info *info, struct vm_area_struct *vma)
> +{
> +	int ret = -ENODEV;
> +	return ret;

Did you run this through checkpatch?

Does the code make sense?

> +}
> +
> +static int dfl_uio_open(struct uio_info *info, struct inode *inode)
> +{
> +	int ret = -ENODEV;
> +	struct dfl_feature *feature = container_of(info, struct dfl_feature, uio);
> +	if (feature->dev)
> +		mutex_lock(&feature->lock);
> +
> +	ret = 0;
> +	return ret;

Same here, does this make sense?

And wait, you are having userspace grab a kernel lock?  What could go
wrong?  :(


> +}
> +
> +static int dfl_uio_release(struct uio_info *info, struct inode *inode)
> +{
> +	int ret = -ENODEV;
> +	struct dfl_feature *feature = container_of(info, struct dfl_feature, uio);
> +	if (feature->dev)
> +		mutex_unlock(&feature->lock);
> +
> +	ret = 0;
> +	return ret;
> +}
> +
> +static int dfl_uio_irqcontrol(struct uio_info *info, s32 irq_on)
> +{
> +	int ret = -ENODEV;
> +	return ret;
> +}
> +
> +int dfl_uio_add(struct dfl_feature *feature)
> +{
> +	struct uio_info *uio = &feature->uio;
> +	struct resource *res =
> +		&feature->dev->resource[feature->resource_index];
> +	int ret = 0;
> +
> +	uio->name = kasprintf(GFP_KERNEL, "dfl-uio-%llx", feature->id);
> +	if (!uio->name) {
> +		ret = -ENOMEM;
> +		goto exit;
> +	}
> +
> +	uio->version = "0.1";
> +	uio->mem[0].memtype = UIO_MEM_PHYS;
> +	uio->mem[0].addr = res->start & PAGE_MASK;
> +	uio->mem[0].offs = res->start & ~PAGE_MASK;
> +	uio->mem[0].size = (uio->mem[0].offs + resource_size(res)
> +			    + PAGE_SIZE - 1) & PAGE_MASK;
> +	/* How are nr_irqs > 1 handled ??? */
> +	if (feature->nr_irqs == 1)
> +		uio->irq = feature->irq_ctx[0].irq;
> +	uio->handler = dfl_uio_handler;
> +	//uio->mmap = dfl_uio_mmap;

???

I don't understand what this patch is trying to show...

thanks,

greg k-h

  parent reply	other threads:[~2020-12-07  8:02 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-06 21:55 [RFC] fpga: dfl: a prototype uio driver trix
2020-12-07  3:49 ` Xu Yilun
2020-12-07  6:24   ` Wu, Hao
2020-12-07 12:42     ` Tom Rix
2020-12-07  8:02 ` Greg KH [this message]
2020-12-07 13:07   ` Tom Rix
2020-12-09  8:56     ` Xu Yilun
2020-12-09 14:50       ` Tom Rix
  -- strict thread matches above, loose matches on Subject: below --
2020-09-19 16:51 trix
     [not found] ` <20200921085553.GA8796@yilunxu-OptiPlex-7050>
2020-09-21 19:32   ` Tom Rix
2020-09-22  3:18     ` Xu Yilun
2020-09-23  1:54       ` Tom Rix

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=X83hkdgrMysGuUdL@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=hao.wu@intel.com \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mdf@kernel.org \
    --cc=trix@redhat.com \
    --cc=yilun.xu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).