From: Moritz Fischer <mdf@kernel.org>
To: Nava kishore Manne <nava.manne@xilinx.com>
Cc: mdf@kernel.org, trix@redhat.com, robh+dt@kernel.org,
michal.simek@xilinx.com, linux-fpga@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, git@xilinx.com
Subject: Re: [PATCH 3/3] fpga: region: Adds runtime PM support
Date: Fri, 9 Apr 2021 14:30:45 -0700 [thread overview]
Message-ID: <YHDHhf1tQo6vI49W@epycbox.lan> (raw)
In-Reply-To: <20210402092049.479-4-nava.manne@xilinx.com>
On Fri, Apr 02, 2021 at 02:50:49PM +0530, Nava kishore Manne wrote:
> Adds support to handle FPGA/PL power domain. With this patch,
> the PL power domain will be turned on before loading the bitstream
> and turned off while removing/unloading the bitstream using overlays.
> This can be achieved by adding the runtime PM support.
>
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> ---
> drivers/fpga/of-fpga-region.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/fpga/of-fpga-region.c b/drivers/fpga/of-fpga-region.c
> index e405309baadc..35fc2f3d4bd8 100644
> --- a/drivers/fpga/of-fpga-region.c
> +++ b/drivers/fpga/of-fpga-region.c
> @@ -15,6 +15,7 @@
> #include <linux/of_platform.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> +#include <linux/pm_runtime.h>
>
> static const struct of_device_id fpga_region_of_match[] = {
> { .compatible = "fpga-region", },
> @@ -302,6 +303,7 @@ static int of_fpga_region_notify_pre_apply(struct fpga_region *region,
> }
>
> region->info = info;
> + pm_runtime_get_sync(dev->parent);
> ret = fpga_region_program_fpga(region);
> if (ret) {
> /* error; reject overlay */
> @@ -324,10 +326,13 @@ static int of_fpga_region_notify_pre_apply(struct fpga_region *region,
> static void of_fpga_region_notify_post_remove(struct fpga_region *region,
> struct of_overlay_notify_data *nd)
> {
> + struct device *dev = ®ion->dev;
> +
> fpga_bridges_disable(®ion->bridge_list);
> fpga_bridges_put(®ion->bridge_list);
> fpga_image_info_free(region->info);
> region->info = NULL;
> + pm_runtime_put(dev->parent);
> }
>
> /**
> @@ -411,9 +416,16 @@ static int of_fpga_region_probe(struct platform_device *pdev)
> goto eprobe_mgr_put;
> }
>
> + pm_runtime_enable(&pdev->dev);
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret < 0)
> + goto err_pm;
> +
> + pm_runtime_put(&pdev->dev);
> +
> ret = fpga_region_register(region);
> if (ret)
> - goto eprobe_mgr_put;
> + goto err_pm;
>
> of_platform_populate(np, fpga_region_of_match, NULL, ®ion->dev);
> platform_set_drvdata(pdev, region);
> @@ -422,6 +434,9 @@ static int of_fpga_region_probe(struct platform_device *pdev)
>
> return 0;
>
> +err_pm:
> + pm_runtime_put(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> eprobe_mgr_put:
> fpga_mgr_put(mgr);
> return ret;
> @@ -434,6 +449,7 @@ static int of_fpga_region_remove(struct platform_device *pdev)
>
> fpga_region_unregister(region);
> fpga_mgr_put(mgr);
> + pm_runtime_disable(region->dev.parent);
>
> return 0;
> }
> --
> 2.18.0
>
Does this add a dependency on CONFIG_PM?
Thanks,
Moritz
next prev parent reply other threads:[~2021-04-09 21:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-02 9:20 [PATCH 0/3]Enable PM generic domain support Nava kishore Manne
2021-04-02 9:20 ` [PATCH 1/3] dt-bindings: zynqmp: Add new PD_PL macro Nava kishore Manne
2021-04-09 14:47 ` Rob Herring
2021-04-02 9:20 ` [PATCH 2/3] fpga: region: Add fpga-region property 'power-domains' Nava kishore Manne
2021-04-02 17:15 ` Moritz Fischer
2021-04-05 8:46 ` Nava kishore Manne
2021-04-09 14:50 ` Rob Herring
2021-04-02 9:20 ` [PATCH 3/3] fpga: region: Adds runtime PM support Nava kishore Manne
2021-04-09 21:30 ` Moritz Fischer [this message]
2021-04-19 5:18 ` Nava kishore Manne
2021-06-02 10:48 ` Nava kishore Manne
2021-06-02 20:39 ` Tom Rix
2021-06-02 13:02 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YHDHhf1tQo6vI49W@epycbox.lan \
--to=mdf@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=nava.manne@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).