linux-fpga.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Moritz Fischer <mdf@kernel.org>
To: Tom Rix <trix@redhat.com>
Cc: "Martin Hundebøll" <martin@geanix.com>,
	"Wu Hao" <hao.wu@intel.com>, "Moritz Fischer" <mdf@kernel.org>,
	"Xu Yilun" <yilun.xu@intel.com>,
	"Jean Delvare" <jdelvare@suse.com>,
	"Guenter Roeck" <linux@roeck-us.net>,
	"Mark Brown" <broonie@kernel.org>,
	"Martin Hundebøll" <mhu@silicom.dk>,
	linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-hwmon@vger.kernel.org, linux-spi@vger.kernel.org
Subject: Re: [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision
Date: Thu, 29 Jul 2021 13:05:25 -0700	[thread overview]
Message-ID: <YQMKBQw99T/hlAfX@epycbox.lan> (raw)
In-Reply-To: <be04e83e-bdf7-3a5c-ff34-a7cbf91f6ba2@redhat.com>

On Fri, Jul 16, 2021 at 01:44:45PM -0700, Tom Rix wrote:
> 
> On 7/16/21 6:54 AM, Martin Hundebøll wrote:
> > From: Martin Hundebøll <mhu@silicom.dk>
> > 
> > The Max10 BMC on the Silicom n5010 PAC is slightly different than the
> > existing BMCs, so use a dedicated feature revision detect it.
> > 
> > Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
> > Reviewed-by: Moritz Fischer <mdf@kernel.org>
> > ---
> > 
> > Changes since v4:
> >   * Moved spi board_info structure from global/static scope
> >     to function/stack scope
> > 
> > Changes since v3:
> >   * Changed "BMC's" to "BMCs"
> >   * Added Moritz' Reviewed-by
> > 
> > Changes since v2:
> >   * None
> > 
> > Changes since v1:
> >   * use feature revision from struct dfl_device instead of reading it
> >     from io-mem
> > 
> >   drivers/spi/spi-altera-dfl.c | 21 ++++++++++++---------
> >   1 file changed, 12 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/spi/spi-altera-dfl.c b/drivers/spi/spi-altera-dfl.c
> > index 39a3e1a032e0..44fc9ee13fc7 100644
> > --- a/drivers/spi/spi-altera-dfl.c
> > +++ b/drivers/spi/spi-altera-dfl.c
> > @@ -104,13 +104,6 @@ static const struct regmap_config indirect_regbus_cfg = {
> >   	.reg_read = indirect_bus_reg_read,
> >   };
> > -static struct spi_board_info m10_bmc_info = {
> > -	.modalias = "m10-d5005",
> > -	.max_speed_hz = 12500000,
> > -	.bus_num = 0,
> > -	.chip_select = 0,
> > -};
> > -
> >   static void config_spi_master(void __iomem *base, struct spi_master *master)
> >   {
> >   	u64 v;
> > @@ -130,6 +123,7 @@ static void config_spi_master(void __iomem *base, struct spi_master *master)
> >   static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
> >   {
> > +	struct spi_board_info board_info = { 0 };
> >   	struct device *dev = &dfl_dev->dev;
> >   	struct spi_master *master;
> >   	struct altera_spi *hw;
> > @@ -170,9 +164,18 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
> >   		goto exit;
> >   	}
> > -	if (!spi_new_device(master,  &m10_bmc_info)) {
> > +	if (dfl_dev->revision == FME_FEATURE_REV_MAX10_SPI_N5010)
> > +		strscpy(board_info.modalias, "m10-n5010", SPI_NAME_SIZE);
> > +	else
> > +		strscpy(board_info.modalias, "m10-d5005", SPI_NAME_SIZE);
> > +
> > +	board_info.max_speed_hz = 12500000;
> > +	board_info.bus_num = 0;
> > +	board_info.chip_select = 0;
> > +
> > +	if (!spi_new_device(master, &board_info)) {
> >   		dev_err(dev, "%s failed to create SPI device: %s\n",
> > -			__func__, m10_bmc_info.modalias);
> > +			__func__, board_info.modalias);
> >   	}
> 
> Looks good to me.
> 
> Reviewed-by: Tom Rix <trix@redhat.com>
> 
> >   	return 0;
> 
Applied to for-next,

Thanks

  reply	other threads:[~2021-07-29 20:05 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-16 13:54 [PATCH v5 0/3] fpga/spi/hwmon: Initial support for Silicom N5010 PAC Martin Hundebøll
2021-07-16 13:54 ` [PATCH v5 1/3] fpga: dfl: expose feature revision from struct dfl_device Martin Hundebøll
2021-07-16 20:46   ` Tom Rix
2021-07-29 20:04   ` Moritz Fischer
2021-07-16 13:54 ` [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision Martin Hundebøll
2021-07-16 17:33   ` Mark Brown
2021-07-17 23:56     ` Moritz Fischer
2021-07-16 20:44   ` Tom Rix
2021-07-29 20:05     ` Moritz Fischer [this message]
2021-07-16 13:54 ` [PATCH v5 3/3] hwmon: intel-m10-bmc-hwmon: add n5010 sensors Martin Hundebøll
2021-07-17 14:02   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YQMKBQw99T/hlAfX@epycbox.lan \
    --to=mdf@kernel.org \
    --cc=broonie@kernel.org \
    --cc=hao.wu@intel.com \
    --cc=jdelvare@suse.com \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=martin@geanix.com \
    --cc=mhu@silicom.dk \
    --cc=trix@redhat.com \
    --cc=yilun.xu@intel.com \
    --subject='Re: [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).