Re: [PATCH -next] fpga: dfl-pci: rectify ReST formatting

[matthew.gerlach@linux.intel.com]

On Mon, 11 Jan 2021, Moritz Fischer wrote:

> Hi Lukas,
>
> On Mon, Jan 11, 2021 at 12:21:13PM +0100, Lukas Bulwahn wrote:
>> Commit fa41d10589be ("fpga: dfl-pci: locate DFLs by PCIe vendor specific
>> capability") provides documentation to the FPGA Device Feature List (DFL)
> Nit: Do you want to make this a Fixes: tag instead?
>> Framework Overview, but introduced new documentation warnings:
>>
>>   ./Documentation/fpga/dfl.rst:
>>     505: WARNING: Title underline too short.
>>     523: WARNING: Unexpected indentation.
>>     523: WARNING: Blank line required after table.
>>     524: WARNING: Block quote ends without a blank line; unexpected unindent.
>>
>> Rectify ReST formatting in ./Documentation/fpga/dfl.rst.
>>
>> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
> Acked-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>> ---
>> applies cleanly on next-20210111
>>
>> Moritz, Matthew, please ack.
>>
>> Greg, please pick this doc fixup to your fpga -next tree on top of
>> the commit above.
>>
>>  Documentation/fpga/dfl.rst | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
>> index ea8cefc18bdb..c41ac76ffaae 100644
>> --- a/Documentation/fpga/dfl.rst
>> +++ b/Documentation/fpga/dfl.rst
>> @@ -502,7 +502,7 @@ FME Partial Reconfiguration Sub Feature driver (see drivers/fpga/dfl-fme-pr.c)
>>  could be a reference.
>>
>>  Location of DFLs on a PCI Device
>> -===========================
>> +================================
>>  The original method for finding a DFL on a PCI device assumed the start of the
>>  first DFL to offset 0 of bar 0.  If the first node of the DFL is an FME,
>>  then further DFLs in the port(s) are specified in FME header registers.
>> @@ -514,6 +514,7 @@ data begins with a 4 byte vendor specific register for the number of DFLs follow
>>  Offset/BIR vendor specific registers for each DFL. Bits 2:0 of Offset/BIR register
>>  indicates the BAR, and bits 31:3 form the 8 byte aligned offset where bits 2:0 are
>>  zero.
>> +::
>>
>>          +----------------------------+
>>          |31     Number of DFLS      0|
>> --
>> 2.17.1
>>
>
> Thanks for doing this, I was about to send that same patch myself.
>
> - Moritz
>