linux-fscrypt.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Satya Tangirala <satyat@google.com>
To: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-fscrypt@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	linux-f2fs-devel@lists.sourceforge.net,
	linux-ext4@vger.kernel.org
Cc: Barani Muthukumaran <bmuthuku@qti.qualcomm.com>,
	Kuohong Wang <kuohong.wang@mediatek.com>,
	Kim Boojin <boojin.kim@samsung.com>,
	Satya Tangirala <satyat@google.com>,
	Eric Biggers <ebiggers@google.com>
Subject: [PATCH v13 06/12] scsi: ufs: UFS driver v2.1 spec crypto additions
Date: Thu, 14 May 2020 00:37:21 +0000	[thread overview]
Message-ID: <20200514003727.69001-7-satyat@google.com> (raw)
In-Reply-To: <20200514003727.69001-1-satyat@google.com>

Add the crypto registers and structs defined in v2.1 of the JEDEC UFSHCI
specification in preparation to add support for inline encryption to
UFS.

Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
---
 drivers/scsi/ufs/ufshcd.c |  2 ++
 drivers/scsi/ufs/ufshcd.h |  6 ++++
 drivers/scsi/ufs/ufshci.h | 67 +++++++++++++++++++++++++++++++++++++--
 3 files changed, 73 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 698e8d20b4bac..2435c600cb2d9 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4767,6 +4767,8 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	case OCS_MISMATCH_RESP_UPIU_SIZE:
 	case OCS_PEER_COMM_FAILURE:
 	case OCS_FATAL_ERROR:
+	case OCS_INVALID_CRYPTO_CONFIG:
+	case OCS_GENERAL_CRYPTO_ERROR:
 	default:
 		result |= DID_ERROR << 16;
 		dev_err(hba->dev,
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 6ffc08ad85f63..835b9a844aa21 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -555,6 +555,12 @@ enum ufshcd_caps {
 	 * for userspace to control the power management.
 	 */
 	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
+
+	/*
+	 * This capability allows the host controller driver to use the
+	 * inline crypto engine, if it is present
+	 */
+	UFSHCD_CAP_CRYPTO				= 1 << 7,
 };
 
 /**
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index c2961d37cc1cf..c0651fe6dbbc6 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -90,6 +90,7 @@ enum {
 	MASK_64_ADDRESSING_SUPPORT		= 0x01000000,
 	MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT	= 0x02000000,
 	MASK_UIC_DME_TEST_MODE_SUPPORT		= 0x04000000,
+	MASK_CRYPTO_SUPPORT			= 0x10000000,
 };
 
 #define UFS_MASK(mask, offset)		((mask) << (offset))
@@ -143,6 +144,7 @@ enum {
 #define DEVICE_FATAL_ERROR			0x800
 #define CONTROLLER_FATAL_ERROR			0x10000
 #define SYSTEM_BUS_FATAL_ERROR			0x20000
+#define CRYPTO_ENGINE_FATAL_ERROR		0x40000
 
 #define UFSHCD_UIC_HIBERN8_MASK	(UIC_HIBERNATE_ENTER |\
 				UIC_HIBERNATE_EXIT)
@@ -155,11 +157,13 @@ enum {
 #define UFSHCD_ERROR_MASK	(UIC_ERROR |\
 				DEVICE_FATAL_ERROR |\
 				CONTROLLER_FATAL_ERROR |\
-				SYSTEM_BUS_FATAL_ERROR)
+				SYSTEM_BUS_FATAL_ERROR |\
+				CRYPTO_ENGINE_FATAL_ERROR)
 
 #define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
 				CONTROLLER_FATAL_ERROR |\
-				SYSTEM_BUS_FATAL_ERROR)
+				SYSTEM_BUS_FATAL_ERROR |\
+				CRYPTO_ENGINE_FATAL_ERROR)
 
 /* HCS - Host Controller Status 30h */
 #define DEVICE_PRESENT				0x1
@@ -318,6 +322,61 @@ enum {
 	INTERRUPT_MASK_ALL_VER_21	= 0x71FFF,
 };
 
+/* CCAP - Crypto Capability 100h */
+union ufs_crypto_capabilities {
+	__le32 reg_val;
+	struct {
+		u8 num_crypto_cap;
+		u8 config_count;
+		u8 reserved;
+		u8 config_array_ptr;
+	};
+};
+
+enum ufs_crypto_key_size {
+	UFS_CRYPTO_KEY_SIZE_INVALID	= 0x0,
+	UFS_CRYPTO_KEY_SIZE_128		= 0x1,
+	UFS_CRYPTO_KEY_SIZE_192		= 0x2,
+	UFS_CRYPTO_KEY_SIZE_256		= 0x3,
+	UFS_CRYPTO_KEY_SIZE_512		= 0x4,
+};
+
+enum ufs_crypto_alg {
+	UFS_CRYPTO_ALG_AES_XTS			= 0x0,
+	UFS_CRYPTO_ALG_BITLOCKER_AES_CBC	= 0x1,
+	UFS_CRYPTO_ALG_AES_ECB			= 0x2,
+	UFS_CRYPTO_ALG_ESSIV_AES_CBC		= 0x3,
+};
+
+/* x-CRYPTOCAP - Crypto Capability X */
+union ufs_crypto_cap_entry {
+	__le32 reg_val;
+	struct {
+		u8 algorithm_id;
+		u8 sdus_mask; /* Supported data unit size mask */
+		u8 key_size;
+		u8 reserved;
+	};
+};
+
+#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
+#define UFS_CRYPTO_KEY_MAX_SIZE 64
+/* x-CRYPTOCFG - Crypto Configuration X */
+union ufs_crypto_cfg_entry {
+	__le32 reg_val[32];
+	struct {
+		u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE];
+		u8 data_unit_size;
+		u8 crypto_cap_idx;
+		u8 reserved_1;
+		u8 config_enable;
+		u8 reserved_multi_host;
+		u8 reserved_2;
+		u8 vsb[2];
+		u8 reserved_3[56];
+	};
+};
+
 /*
  * Request Descriptor Definitions
  */
@@ -339,6 +398,7 @@ enum {
 	UTP_NATIVE_UFS_COMMAND		= 0x10000000,
 	UTP_DEVICE_MANAGEMENT_FUNCTION	= 0x20000000,
 	UTP_REQ_DESC_INT_CMD		= 0x01000000,
+	UTP_REQ_DESC_CRYPTO_ENABLE_CMD	= 0x00800000,
 };
 
 /* UTP Transfer Request Data Direction (DD) */
@@ -358,6 +418,9 @@ enum {
 	OCS_PEER_COMM_FAILURE		= 0x5,
 	OCS_ABORTED			= 0x6,
 	OCS_FATAL_ERROR			= 0x7,
+	OCS_DEVICE_FATAL_ERROR		= 0x8,
+	OCS_INVALID_CRYPTO_CONFIG	= 0x9,
+	OCS_GENERAL_CRYPTO_ERROR	= 0xA,
 	OCS_INVALID_COMMAND_STATUS	= 0x0F,
 	MASK_OCS			= 0x0F,
 };
-- 
2.26.2.645.ge9eca65c58-goog


  parent reply	other threads:[~2020-05-14  0:37 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14  0:37 [PATCH v13 00/12] Inline Encryption Support Satya Tangirala
2020-05-14  0:37 ` [PATCH v13 01/12] Documentation: Document the blk-crypto framework Satya Tangirala
2020-05-14  0:37 ` [PATCH v13 02/12] block: Keyslot Manager for Inline Encryption Satya Tangirala
2020-05-14  0:37 ` [PATCH v13 03/12] block: Inline encryption support for blk-mq Satya Tangirala
2020-05-14  0:37 ` [PATCH v13 04/12] block: Make blk-integrity preclude hardware inline encryption Satya Tangirala
2020-05-14  0:37 ` [PATCH v13 05/12] block: blk-crypto-fallback for Inline Encryption Satya Tangirala
2020-05-14  0:37 ` Satya Tangirala [this message]
2020-05-15  3:55   ` [PATCH v13 06/12] scsi: ufs: UFS driver v2.1 spec crypto additions Stanley Chu
2020-05-14  0:37 ` [PATCH v13 07/12] scsi: ufs: UFS crypto API Satya Tangirala
2020-05-15  6:35   ` Stanley Chu
2020-05-14  0:37 ` [PATCH v13 08/12] scsi: ufs: Add inline encryption support to UFS Satya Tangirala
2020-05-14  5:12   ` Eric Biggers
2020-05-15  7:37   ` Stanley Chu
2020-05-14  0:37 ` [PATCH v13 09/12] fs: introduce SB_INLINECRYPT Satya Tangirala
2020-05-14  0:37 ` [PATCH v13 10/12] fscrypt: add inline encryption support Satya Tangirala
2020-05-28 21:54   ` Eric Biggers
2020-06-03  2:07   ` Eric Biggers
2020-05-14  0:37 ` [PATCH v13 11/12] f2fs: " Satya Tangirala
2020-05-14  0:37 ` [PATCH v13 12/12] ext4: " Satya Tangirala
2020-05-14  5:10 ` [PATCH v13 00/12] Inline Encryption Support Eric Biggers
2020-05-14 15:48   ` Jens Axboe
2020-05-15  7:41     ` Christoph Hellwig
2020-05-15 12:25       ` Satya Tangirala
2020-05-15 14:42         ` Christoph Hellwig
2020-05-15 17:00           ` Eric Biggers
2020-05-18 16:50             ` Christoph Hellwig
2020-05-15  1:04   ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200514003727.69001-7-satyat@google.com \
    --to=satyat@google.com \
    --cc=bmuthuku@qti.qualcomm.com \
    --cc=boojin.kim@samsung.com \
    --cc=ebiggers@google.com \
    --cc=kuohong.wang@mediatek.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-fscrypt@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).