Linux-FSCrypt Archive on lore.kernel.org
 help / color / Atom feed
From: Eric Biggers <ebiggers@kernel.org>
To: Satya Tangirala <satyat@google.com>
Cc: linux-fscrypt@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	linux-f2fs-devel@lists.sourceforge.net,
	linux-ext4@vger.kernel.org, linux-xfs@vger.kernel.org
Subject: Re: [PATCH v3 3/7] iomap: support direct I/O with fscrypt using blk-crypto
Date: Mon, 20 Jul 2020 12:29:45 -0700
Message-ID: <20200720192945.GG1292162@gmail.com> (raw)
In-Reply-To: <20200717014540.71515-4-satyat@google.com>

On Fri, Jul 17, 2020 at 01:45:36AM +0000, Satya Tangirala wrote:
> From: Eric Biggers <ebiggers@google.com>
> 
> Wire up iomap direct I/O with the fscrypt additions for direct I/O,
> and set bio crypt contexts on bios when appropriate.
> 
> Make iomap_dio_bio_actor() call fscrypt_limit_io_pages() to ensure that
> DUNs remain contiguous within a bio, since it works directly with logical
> ranges and can't call fscrypt_mergeable_bio() on each page.

This commit message is still confusing.

How about the following:

"Wire up iomap direct I/O with the fscrypt additions for direct I/O.
This allows ext4 to support direct I/O on encrypted files when inline
encryption is enabled.

This change consists of two parts:

- Set a bio_crypt_ctx on bios for encrypted files, so that the file
  contents get encrypted (or decrypted).

- Ensure that encryption data unit numbers (DUNs) are contiguous within
  each bio.  Use the new function fscrypt_limit_io_pages() for this,
  since the iomap code works directly with logical ranges and thus
  doesn't have a chance to call fscrypt_mergeable_bio() on each page.

Note that fscrypt_limit_io_pages() is normally a no-op, as normally the
DUNs simply increment along with the logical blocks.  But it's needed to
handle an edge case in one of the fscrypt IV generation methods."

> @@ -183,11 +184,14 @@ static void
>  iomap_dio_zero(struct iomap_dio *dio, struct iomap *iomap, loff_t pos,
>  		unsigned len)
>  {
> +	struct inode *inode = file_inode(dio->iocb->ki_filp);
>  	struct page *page = ZERO_PAGE(0);
>  	int flags = REQ_SYNC | REQ_IDLE;
>  	struct bio *bio;
>  
>  	bio = bio_alloc(GFP_KERNEL, 1);
> +	fscrypt_set_bio_crypt_ctx(bio, inode, pos >> inode->i_blkbits,
> +				  GFP_KERNEL);
>  	bio_set_dev(bio, iomap->bdev);
>  	bio->bi_iter.bi_sector = iomap_sector(iomap, pos);
>  	bio->bi_private = dio;

iomap_dio_zero() is only used on partial filesystem blocks.  But, we
only allow direct I/O on encrypted files when the I/O is
filesystem-block-aligned.

So this part appears to be unnecessary.

How about replacing it with:

	/* encrypted direct I/O is guaranteed to be fs-block aligned */
	WARN_ON_ONCE(fscrypt_needs_contents_encryption(inode));

> @@ -253,6 +257,7 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length,
>  		ret = nr_pages;
>  		goto out;
>  	}
> +	nr_pages = fscrypt_limit_io_pages(inode, pos, nr_pages);
>  
>  	if (need_zeroout) {
>  		/* zero out from the start of the block to the write offset */
> @@ -270,6 +275,8 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length,
>  		}
>  
>  		bio = bio_alloc(GFP_KERNEL, nr_pages);
> +		fscrypt_set_bio_crypt_ctx(bio, inode, pos >> inode->i_blkbits,
> +					  GFP_KERNEL);
>  		bio_set_dev(bio, iomap->bdev);
>  		bio->bi_iter.bi_sector = iomap_sector(iomap, pos);
>  		bio->bi_write_hint = dio->iocb->ki_hint;
> @@ -307,6 +314,7 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length,
>  		copied += n;
>  
>  		nr_pages = iov_iter_npages(dio->submit.iter, BIO_MAX_PAGES);
> +		nr_pages = fscrypt_limit_io_pages(inode, pos, nr_pages);
>  		iomap_dio_submit_bio(dio, iomap, bio, pos);
>  		pos += n;
>  	} while (nr_pages);

I think the part at the end is wrong.

We want to limit the *next* bio, not the current one.

So 'pos' needs to be updated first.

I think it should be:

                iomap_dio_submit_bio(dio, iomap, bio, pos);
                pos += n;
                nr_pages = iov_iter_npages(dio->submit.iter, BIO_MAX_PAGES);
                nr_pages = fscrypt_limit_io_pages(inode, pos, nr_pages);

  reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17  1:45 [PATCH v3 0/7] add support for " Satya Tangirala
2020-07-17  1:45 ` [PATCH v3 1/7] fscrypt: Add functions for direct I/O support Satya Tangirala
2020-07-20 20:14   ` Eric Biggers
2020-07-17  1:45 ` [PATCH v3 2/7] direct-io: add support for fscrypt using blk-crypto Satya Tangirala
2020-07-17  1:45 ` [PATCH v3 3/7] iomap: support direct I/O with " Satya Tangirala
2020-07-20 19:29   ` Eric Biggers [this message]
2020-07-17  1:45 ` [PATCH v3 4/7] ext4: " Satya Tangirala
2020-07-17  1:45 ` [PATCH v3 5/7] f2fs: " Satya Tangirala
2020-07-17  1:45 ` [PATCH v3 6/7] fscrypt: document inline encryption support Satya Tangirala
2020-07-20 19:34   ` Eric Biggers
2020-07-17  1:45 ` [PATCH v3 7/7] fscrypt: update documentation for direct I/O support Satya Tangirala
2020-07-20 19:40   ` Eric Biggers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200720192945.GG1292162@gmail.com \
    --to=ebiggers@kernel.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-fscrypt@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=satyat@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-FSCrypt Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-fscrypt/0 linux-fscrypt/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-fscrypt linux-fscrypt/ https://lore.kernel.org/linux-fscrypt \
		linux-fscrypt@vger.kernel.org
	public-inbox-index linux-fscrypt

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-fscrypt


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git