linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Kleikamp <dave.kleikamp@oracle.com>
To: linux-kernel@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	"Maxim V. Patlasov" <mpatlasov@parallels.com>,
	Zach Brown <zab@zabbo.net>,
	Dave Kleikamp <dave.kleikamp@oracle.com>
Subject: [PATCH V8 01/33] iov_iter: move into its own file
Date: Thu, 25 Jul 2013 12:50:27 -0500	[thread overview]
Message-ID: <1374774659-13121-2-git-send-email-dave.kleikamp@oracle.com> (raw)
In-Reply-To: <1374774659-13121-1-git-send-email-dave.kleikamp@oracle.com>

From: Zach Brown <zab@zabbo.net>

This moves the iov_iter functions in to their own file.  We're going to
be working on them in upcoming patches.  They become sufficiently large,
and remain self-contained, to justify seperating them from the rest of
the huge mm/filemap.c.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Zach Brown <zab@zabbo.net>
---
 fs/Makefile   |   2 +-
 fs/iov-iter.c | 151 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 mm/filemap.c  | 144 -------------------------------------------------------
 3 files changed, 152 insertions(+), 145 deletions(-)
 create mode 100644 fs/iov-iter.c

diff --git a/fs/Makefile b/fs/Makefile
index 4fe6df3..1afa0e0 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -11,7 +11,7 @@ obj-y :=	open.o read_write.o file_table.o super.o \
 		attr.o bad_inode.o file.o filesystems.o namespace.o \
 		seq_file.o xattr.o libfs.o fs-writeback.o \
 		pnode.o splice.o sync.o utimes.o \
-		stack.o fs_struct.o statfs.o
+		stack.o fs_struct.o statfs.o iov-iter.o
 
 ifeq ($(CONFIG_BLOCK),y)
 obj-y +=	buffer.o bio.o block_dev.o direct-io.o mpage.o ioprio.o
diff --git a/fs/iov-iter.c b/fs/iov-iter.c
new file mode 100644
index 0000000..52c23d9
--- /dev/null
+++ b/fs/iov-iter.c
@@ -0,0 +1,151 @@
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/uio.h>
+#include <linux/hardirq.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+
+static size_t __iovec_copy_from_user_inatomic(char *vaddr,
+			const struct iovec *iov, size_t base, size_t bytes)
+{
+	size_t copied = 0, left = 0;
+
+	while (bytes) {
+		char __user *buf = iov->iov_base + base;
+		int copy = min(bytes, iov->iov_len - base);
+
+		base = 0;
+		left = __copy_from_user_inatomic(vaddr, buf, copy);
+		copied += copy;
+		bytes -= copy;
+		vaddr += copy;
+		iov++;
+
+		if (unlikely(left))
+			break;
+	}
+	return copied - left;
+}
+
+/*
+ * Copy as much as we can into the page and return the number of bytes which
+ * were successfully copied.  If a fault is encountered then return the number
+ * of bytes which were copied.
+ */
+size_t iov_iter_copy_from_user_atomic(struct page *page,
+		struct iov_iter *i, unsigned long offset, size_t bytes)
+{
+	char *kaddr;
+	size_t copied;
+
+	BUG_ON(!in_atomic());
+	kaddr = kmap_atomic(page);
+	if (likely(i->nr_segs == 1)) {
+		int left;
+		char __user *buf = i->iov->iov_base + i->iov_offset;
+		left = __copy_from_user_inatomic(kaddr + offset, buf, bytes);
+		copied = bytes - left;
+	} else {
+		copied = __iovec_copy_from_user_inatomic(kaddr + offset,
+						i->iov, i->iov_offset, bytes);
+	}
+	kunmap_atomic(kaddr);
+
+	return copied;
+}
+EXPORT_SYMBOL(iov_iter_copy_from_user_atomic);
+
+/*
+ * This has the same sideeffects and return value as
+ * iov_iter_copy_from_user_atomic().
+ * The difference is that it attempts to resolve faults.
+ * Page must not be locked.
+ */
+size_t iov_iter_copy_from_user(struct page *page,
+		struct iov_iter *i, unsigned long offset, size_t bytes)
+{
+	char *kaddr;
+	size_t copied;
+
+	kaddr = kmap(page);
+	if (likely(i->nr_segs == 1)) {
+		int left;
+		char __user *buf = i->iov->iov_base + i->iov_offset;
+		left = __copy_from_user(kaddr + offset, buf, bytes);
+		copied = bytes - left;
+	} else {
+		copied = __iovec_copy_from_user_inatomic(kaddr + offset,
+						i->iov, i->iov_offset, bytes);
+	}
+	kunmap(page);
+	return copied;
+}
+EXPORT_SYMBOL(iov_iter_copy_from_user);
+
+void iov_iter_advance(struct iov_iter *i, size_t bytes)
+{
+	BUG_ON(i->count < bytes);
+
+	if (likely(i->nr_segs == 1)) {
+		i->iov_offset += bytes;
+		i->count -= bytes;
+	} else {
+		const struct iovec *iov = i->iov;
+		size_t base = i->iov_offset;
+		unsigned long nr_segs = i->nr_segs;
+
+		/*
+		 * The !iov->iov_len check ensures we skip over unlikely
+		 * zero-length segments (without overruning the iovec).
+		 */
+		while (bytes || unlikely(i->count && !iov->iov_len)) {
+			int copy;
+
+			copy = min(bytes, iov->iov_len - base);
+			BUG_ON(!i->count || i->count < copy);
+			i->count -= copy;
+			bytes -= copy;
+			base += copy;
+			if (iov->iov_len == base) {
+				iov++;
+				nr_segs--;
+				base = 0;
+			}
+		}
+		i->iov = iov;
+		i->iov_offset = base;
+		i->nr_segs = nr_segs;
+	}
+}
+EXPORT_SYMBOL(iov_iter_advance);
+
+/*
+ * Fault in the first iovec of the given iov_iter, to a maximum length
+ * of bytes. Returns 0 on success, or non-zero if the memory could not be
+ * accessed (ie. because it is an invalid address).
+ *
+ * writev-intensive code may want this to prefault several iovecs -- that
+ * would be possible (callers must not rely on the fact that _only_ the
+ * first iovec will be faulted with the current implementation).
+ */
+int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes)
+{
+	char __user *buf = i->iov->iov_base + i->iov_offset;
+	bytes = min(bytes, i->iov->iov_len - i->iov_offset);
+	return fault_in_pages_readable(buf, bytes);
+}
+EXPORT_SYMBOL(iov_iter_fault_in_readable);
+
+/*
+ * Return the count of just the current iov_iter segment.
+ */
+size_t iov_iter_single_seg_count(const struct iov_iter *i)
+{
+	const struct iovec *iov = i->iov;
+	if (i->nr_segs == 1)
+		return i->count;
+	else
+		return min(i->count, iov->iov_len - i->iov_offset);
+}
+EXPORT_SYMBOL(iov_iter_single_seg_count);
diff --git a/mm/filemap.c b/mm/filemap.c
index 4b51ac1..11ebe36 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1941,150 +1941,6 @@ struct page *read_cache_page(struct address_space *mapping,
 }
 EXPORT_SYMBOL(read_cache_page);
 
-static size_t __iovec_copy_from_user_inatomic(char *vaddr,
-			const struct iovec *iov, size_t base, size_t bytes)
-{
-	size_t copied = 0, left = 0;
-
-	while (bytes) {
-		char __user *buf = iov->iov_base + base;
-		int copy = min(bytes, iov->iov_len - base);
-
-		base = 0;
-		left = __copy_from_user_inatomic(vaddr, buf, copy);
-		copied += copy;
-		bytes -= copy;
-		vaddr += copy;
-		iov++;
-
-		if (unlikely(left))
-			break;
-	}
-	return copied - left;
-}
-
-/*
- * Copy as much as we can into the page and return the number of bytes which
- * were successfully copied.  If a fault is encountered then return the number of
- * bytes which were copied.
- */
-size_t iov_iter_copy_from_user_atomic(struct page *page,
-		struct iov_iter *i, unsigned long offset, size_t bytes)
-{
-	char *kaddr;
-	size_t copied;
-
-	BUG_ON(!in_atomic());
-	kaddr = kmap_atomic(page);
-	if (likely(i->nr_segs == 1)) {
-		int left;
-		char __user *buf = i->iov->iov_base + i->iov_offset;
-		left = __copy_from_user_inatomic(kaddr + offset, buf, bytes);
-		copied = bytes - left;
-	} else {
-		copied = __iovec_copy_from_user_inatomic(kaddr + offset,
-						i->iov, i->iov_offset, bytes);
-	}
-	kunmap_atomic(kaddr);
-
-	return copied;
-}
-EXPORT_SYMBOL(iov_iter_copy_from_user_atomic);
-
-/*
- * This has the same sideeffects and return value as
- * iov_iter_copy_from_user_atomic().
- * The difference is that it attempts to resolve faults.
- * Page must not be locked.
- */
-size_t iov_iter_copy_from_user(struct page *page,
-		struct iov_iter *i, unsigned long offset, size_t bytes)
-{
-	char *kaddr;
-	size_t copied;
-
-	kaddr = kmap(page);
-	if (likely(i->nr_segs == 1)) {
-		int left;
-		char __user *buf = i->iov->iov_base + i->iov_offset;
-		left = __copy_from_user(kaddr + offset, buf, bytes);
-		copied = bytes - left;
-	} else {
-		copied = __iovec_copy_from_user_inatomic(kaddr + offset,
-						i->iov, i->iov_offset, bytes);
-	}
-	kunmap(page);
-	return copied;
-}
-EXPORT_SYMBOL(iov_iter_copy_from_user);
-
-void iov_iter_advance(struct iov_iter *i, size_t bytes)
-{
-	BUG_ON(i->count < bytes);
-
-	if (likely(i->nr_segs == 1)) {
-		i->iov_offset += bytes;
-		i->count -= bytes;
-	} else {
-		const struct iovec *iov = i->iov;
-		size_t base = i->iov_offset;
-		unsigned long nr_segs = i->nr_segs;
-
-		/*
-		 * The !iov->iov_len check ensures we skip over unlikely
-		 * zero-length segments (without overruning the iovec).
-		 */
-		while (bytes || unlikely(i->count && !iov->iov_len)) {
-			int copy;
-
-			copy = min(bytes, iov->iov_len - base);
-			BUG_ON(!i->count || i->count < copy);
-			i->count -= copy;
-			bytes -= copy;
-			base += copy;
-			if (iov->iov_len == base) {
-				iov++;
-				nr_segs--;
-				base = 0;
-			}
-		}
-		i->iov = iov;
-		i->iov_offset = base;
-		i->nr_segs = nr_segs;
-	}
-}
-EXPORT_SYMBOL(iov_iter_advance);
-
-/*
- * Fault in the first iovec of the given iov_iter, to a maximum length
- * of bytes. Returns 0 on success, or non-zero if the memory could not be
- * accessed (ie. because it is an invalid address).
- *
- * writev-intensive code may want this to prefault several iovecs -- that
- * would be possible (callers must not rely on the fact that _only_ the
- * first iovec will be faulted with the current implementation).
- */
-int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes)
-{
-	char __user *buf = i->iov->iov_base + i->iov_offset;
-	bytes = min(bytes, i->iov->iov_len - i->iov_offset);
-	return fault_in_pages_readable(buf, bytes);
-}
-EXPORT_SYMBOL(iov_iter_fault_in_readable);
-
-/*
- * Return the count of just the current iov_iter segment.
- */
-size_t iov_iter_single_seg_count(const struct iov_iter *i)
-{
-	const struct iovec *iov = i->iov;
-	if (i->nr_segs == 1)
-		return i->count;
-	else
-		return min(i->count, iov->iov_len - i->iov_offset);
-}
-EXPORT_SYMBOL(iov_iter_single_seg_count);
-
 /*
  * Performs necessary checks before doing a write
  *
-- 
1.8.3.4


  reply	other threads:[~2013-07-25 17:52 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-25 17:50 [PATCH V8 00/33] loop: Issue O_DIRECT aio using bio_vec Dave Kleikamp
2013-07-25 17:50 ` Dave Kleikamp [this message]
2013-07-25 17:50 ` [PATCH V8 02/33] iov_iter: iov_iter_copy_from_user() should use non-atomic copy Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 03/33] iov_iter: add copy_to_user support Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 04/33] iov_iter: add __iovec_copy_to_user() Dave Kleikamp
     [not found] ` <1374774659-13121-1-git-send-email-dave.kleikamp-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2013-07-25 17:50   ` [PATCH V8 05/33] fuse: convert fuse to use iov_iter_copy_[to|from]_user Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 06/33] iov_iter: hide iovec details behind ops function pointers Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 07/33] iov_iter: ii_iovec_copy_to_user should pre-fault user pages Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 08/33] iov_iter: add bvec support Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 09/33] iov_iter: add a shorten call Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 10/33] iov_iter: let callers extract iovecs and bio_vecs Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 11/33] dio: Convert direct_IO to use iov_iter Dave Kleikamp
2013-08-23 15:48   ` Geert Uytterhoeven
2013-07-25 17:50 ` [PATCH V8 12/33] dio: add bio_vec support to __blockdev_direct_IO() Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 13/33] fs: pull iov_iter use higher up the stack Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 14/33] aio: add aio_kernel_() interface Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 15/33] aio: add aio support for iov_iter arguments Dave Kleikamp
2013-08-21 13:55   ` Benjamin LaHaise
2013-08-30 20:05     ` Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 16/33] bio: add bvec_length(), like iov_length() Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 17/33] loop: use aio to perform io on the underlying file Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 18/33] fs: create file_readable() and file_writable() functions Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 19/33] fs: use read_iter and write_iter rather than aio_read and aio_write Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 20/33] fs: add read_iter and write_iter to several file systems Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 21/33] ocfs2: add support for read_iter and write_iter Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 22/33] ext4: " Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 23/33] nfs: add support for read_iter, write_iter Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 24/33] nfs: simplify swap Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 25/33] btrfs: add support for read_iter and write_iter Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 26/33] block_dev: add support for read_iter, write_iter Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 27/33] xfs: add support for read_iter and write_iter Dave Kleikamp
2013-07-26 11:51   ` Dave Chinner
2013-07-25 17:50 ` [PATCH V8 28/33] gfs2: Convert aio_read/write ops to read/write_iter Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 29/33] udf: convert file ops from aio_read/write " Dave Kleikamp
2013-07-25 21:34   ` Jan Kara
2013-07-25 17:50 ` [PATCH V8 30/33] afs: add support for read_iter and write_iter Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 31/33] ecrpytfs: Convert aio_read/write ops to read/write_iter Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 32/33] ubifs: convert file ops from aio_read/write " Dave Kleikamp
2013-07-25 17:50 ` [PATCH V8 33/33] tmpfs: add support for read_iter and write_iter Dave Kleikamp
2013-07-30 21:28 ` [PATCH V8 00/33] loop: Issue O_DIRECT aio using bio_vec Andrew Morton
2013-07-31  0:43   ` Dave Chinner
2013-07-31  6:40     ` Sedat Dilek
2013-07-31  8:41       ` Sedat Dilek
2013-07-31 11:22         ` Sedat Dilek
2013-07-31  9:51   ` Maxim Patlasov
2013-08-01  8:58 ` Christoph Hellwig
2013-08-01 13:04   ` Dave Kleikamp
2013-08-02 10:48     ` Christoph Hellwig
2013-08-20 13:00 ` Christoph Hellwig
2013-08-20 19:13   ` Dave Kleikamp
2013-08-21  0:14     ` Stephen Rothwell
2013-08-21  5:35       ` Sedat Dilek
2013-08-20 22:46   ` Andrew Morton
2013-08-21 13:02 ` Benjamin LaHaise
2013-08-21 16:30   ` Dave Kleikamp
2013-08-21 16:39     ` Benjamin LaHaise
2013-08-21 17:12       ` Dave Kleikamp
2013-08-21 19:30   ` Andrew Morton
2013-08-21 20:24     ` Benjamin LaHaise
2013-10-14 15:07   ` Christoph Hellwig
2013-10-14 21:29     ` Benjamin LaHaise
2013-10-15 16:55       ` Christoph Hellwig
2013-10-15 17:14         ` Benjamin LaHaise
2013-10-15 17:18           ` Christoph Hellwig
2013-10-15 17:53             ` Dave Kleikamp
2014-12-31 20:38 ` Sedat Dilek
2014-12-31 21:52   ` Dave Kleikamp
2014-12-31 22:35     ` Sedat Dilek
2015-01-01  0:52       ` Ming Lei
2015-01-05 19:24         ` Maxim Patlasov
2015-01-06 13:18           ` Ming Lei
2015-01-10 16:51             ` Ming Lei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1374774659-13121-2-git-send-email-dave.kleikamp@oracle.com \
    --to=dave.kleikamp@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpatlasov@parallels.com \
    --cc=zab@zabbo.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).