[PATCH net-next v3 0/3] kernel: add support to collect hardware logs in crash recovery kernel

[PATCH net-next v3 0/3] kernel: add support to collect hardware logs in crash recovery kernel

[Rahul Lakkireddy]

On production servers running variety of workloads over time, kernel
panic can happen sporadically after days or even months. It is
important to collect as much debug logs as possible to root cause
and fix the problem, that may not be easy to reproduce. Snapshot of
underlying hardware/firmware state (like register dump, firmware
logs, adapter memory, etc.), at the time of kernel panic will be very
helpful while debugging the culprit device driver.

This series of patches add new generic framework that enable device
drivers to collect device specific snapshot of the hardware/firmware
state of the underlying device in the crash recovery kernel. In crash
recovery kernel, the collected logs are added as elf notes to
/proc/vmcore, which is copied by user space scripts for post-analysis.

The sequence of actions done by device drivers to append their device
specific hardware/firmware logs to /proc/vmcore are as follows:

1. During probe (before hardware is initialized), device drivers
register to the vmcore module (via vmcore_add_device_dump()), with
callback function, along with buffer size and log name needed for
firmware/hardware log collection.

2. vmcore module allocates the buffer with requested size. It adds
an elf note and invokes the device driver's registered callback
function.

3. Device driver collects all hardware/firmware logs into the buffer
and returns control back to vmcore module.

The device specific hardware/firmware logs can be seen as elf notes:

# readelf -n /proc/vmcore

Displaying notes found at file offset 0x00001000 with length 0x04003288:
  Owner                 Data size	Description
  VMCOREDD_cxgb4_0000:02:00.4 0x02000fd8	Unknown note type: (0x00000700)
  VMCOREDD_cxgb4_0000:04:00.4 0x02000fd8	Unknown note type: (0x00000700)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  VMCOREINFO           0x0000074f	Unknown note type: (0x00000000)

Patch 1 adds API to vmcore module to allow drivers to register callback
to collect the device specific hardware/firmware logs.  The logs will
be added to /proc/vmcore as elf notes.

Patch 2 updates read and mmap logic to append device specific hardware/
firmware logs as elf notes.

Patch 3 shows a cxgb4 driver example using the API to collect
hardware/firmware logs in crash recovery kernel, before hardware is
initialized.

Thanks,
Rahul

RFC v1: https://lkml.org/lkml/2018/3/2/542
RFC v2: https://lkml.org/lkml/2018/3/16/326

---
v3:
- Dropped sysfs crashdd module.
- Exported dumps as elf notes. Suggested by Eric Biederman
  <ebiederm@xmission.com>.  Added as patch 2 in this version.
- Added CONFIG_PROC_VMCORE_DEVICE_DUMP to allow configuring device
  dump support.
- Moved logic related to adding dumps from crashdd to vmcore module.
- Rename all crashdd* to vmcoredd*.
- Updated comments.

v2:
- Added ABI Documentation for crashdd.
- Directly use octal permission instead of macro.

Changes since rfc v2:
- Moved exporting crashdd from procfs to sysfs. Suggested by
  Stephen Hemminger <stephen@networkplumber.org>
- Moved code from fs/proc/crashdd.c to fs/crashdd/ directory.
- Replaced all proc API with sysfs API and updated comments.
- Calling driver callback before creating the binary file under
  crashdd sysfs.
- Changed binary dump file permission from S_IRUSR to S_IRUGO.
- Changed module name from CRASH_DRIVER_DUMP to CRASH_DEVICE_DUMP.

rfc v2:
- Collecting logs in 2nd kernel instead of during kernel panic.
  Suggested by Eric Biederman <ebiederm@xmission.com>.
- Added new crashdd module that exports /proc/crashdd/ containing
  driver's registered hardware/firmware logs in patch 1.
- Replaced the API to allow drivers to register their hardware/firmware
  log collect routine in crash recovery kernel in patch 1.
- Updated patch 2 to use the new API in patch 1.

Rahul Lakkireddy (3):
  vmcore: add API to collect hardware dump in second kernel
  vmcore: append device dumps to vmcore as elf notes
  cxgb4: collect hardware dump in second kernel

 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h       |   4 +
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c |  25 ++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.h |   3 +
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c  |  10 +
 fs/proc/Kconfig                                  |  10 +
 fs/proc/vmcore.c                                 | 403 ++++++++++++++++++++++-
 include/linux/crash_core.h                       |   4 +
 include/linux/crash_dump.h                       |  10 +
 include/linux/kcore.h                            |   6 +
 include/uapi/linux/elf.h                         |   1 +
 10 files changed, 463 insertions(+), 13 deletions(-)

-- 
2.14.1

[PATCH net-next v3 1/3] vmcore: add API to collect hardware dump in second kernel

[Rahul Lakkireddy]

The sequence of actions done by device drivers to append their device
specific hardware/firmware logs to /proc/vmcore are as follows:

1. During probe (before hardware is initialized), device drivers
register to the vmcore module (via vmcore_add_device_dump()), with
callback function, along with buffer size and log name needed for
firmware/hardware log collection.

2. vmcore module allocates the buffer with requested size. It adds
an Elf note and invokes the device driver's registered callback
function.

3. Device driver collects all hardware/firmware logs into the buffer
and returns control back to vmcore module.

Ensure that the device dump buffer size is always aligned to page size
so that it can be mmaped.

Also, rename alloc_elfnotes_buf() to vmcore_alloc_buf() to make it more
generic and reserve NT_VMCOREDD note type to indicate vmcore device
dump.

Suggested-by: Eric Biederman <ebiederm@xmission.com>.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
---
v3:
- Dropped sysfs crashdd module.
- Added CONFIG_PROC_VMCORE_DEVICE_DUMP to allow configuring device
  dump support.
- Moved logic related to adding dumps from crashdd to vmcore module.
- Rename all crashdd* to vmcoredd*.

v2:
- Added ABI Documentation for crashdd.
- Directly use octal permission instead of macro.

Changes since rfc v2:
- Moved exporting crashdd from procfs to sysfs.  Suggested by
  Stephen Hemminger <stephen@networkplumber.org>
- Moved code from fs/proc/crashdd.c to fs/crashdd/ directory.
- Replaced all proc API with sysfs API and updated comments.
- Calling driver callback before creating the binary file under
  crashdd sysfs.
- Changed binary dump file permission from S_IRUSR to S_IRUGO.
- Changed module name from CRASH_DRIVER_DUMP to CRASH_DEVICE_DUMP.

rfc v2:
- Collecting logs in 2nd kernel instead of during kernel panic.
  Suggested by Eric Biederman <ebiederm@xmission.com>.
- Patch added in this series.

 fs/proc/Kconfig            |  10 +++
 fs/proc/vmcore.c           | 156 ++++++++++++++++++++++++++++++++++++++++++---
 include/linux/crash_core.h |   4 ++
 include/linux/crash_dump.h |  10 +++
 include/linux/kcore.h      |   6 ++
 include/uapi/linux/elf.h   |   1 +
 6 files changed, 178 insertions(+), 9 deletions(-)

diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
index 1ade1206bb89..c31e8944592e 100644
--- a/fs/proc/Kconfig
+++ b/fs/proc/Kconfig
@@ -43,6 +43,16 @@ config PROC_VMCORE
         help
         Exports the dump image of crashed kernel in ELF format.
 
+config PROC_VMCORE_DEVICE_DUMP
+	bool "Device Hardware/Firmware Log Collection"
+	depends on PROC_VMCORE
+	default y
+	---help---
+	  Device drivers can collect the device specific snapshot of
+	  their hardware or firmware before they are initialized in
+	  crash recovery kernel. If you say Y here, the device dumps
+	  will be added as ELF notes to /proc/vmcore
+
 config PROC_SYSCTL
 	bool "Sysctl support (/proc/sys)" if EXPERT
 	depends on PROC_FS
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index a45f0af22a60..b53698f22362 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/crash_dump.h>
 #include <linux/list.h>
+#include <linux/mutex.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
 #include <linux/uaccess.h>
@@ -44,6 +45,12 @@ static u64 vmcore_size;
 
 static struct proc_dir_entry *proc_vmcore;
 
+#ifdef CONFIG_PROC_VMCORE_DEVICE_DUMP
+/* Device Dump list and mutex to synchronize access to list */
+static LIST_HEAD(vmcoredd_list);
+static DEFINE_MUTEX(vmcoredd_mutex);
+#endif /* CONFIG_PROC_VMCORE_DEVICE_DUMP */
+
 /*
  * Returns > 0 for RAM pages, 0 for non-RAM pages, < 0 on error
  * The called function has to take care of module refcounting.
@@ -302,10 +309,8 @@ static const struct vm_operations_struct vmcore_mmap_ops = {
 };
 
 /**
- * alloc_elfnotes_buf - allocate buffer for ELF note segment in
- *                      vmalloc memory
- *
- * @notes_sz: size of buffer
+ * vmcore_alloc_buf - allocate buffer in vmalloc memory
+ * @sizez: size of buffer
  *
  * If CONFIG_MMU is defined, use vmalloc_user() to allow users to mmap
  * the buffer to user-space by means of remap_vmalloc_range().
@@ -313,12 +318,12 @@ static const struct vm_operations_struct vmcore_mmap_ops = {
  * If CONFIG_MMU is not defined, use vzalloc() since mmap_vmcore() is
  * disabled and there's no need to allow users to mmap the buffer.
  */
-static inline char *alloc_elfnotes_buf(size_t notes_sz)
+static inline char *vmcore_alloc_buf(size_t size)
 {
 #ifdef CONFIG_MMU
-	return vmalloc_user(notes_sz);
+	return vmalloc_user(size);
 #else
-	return vzalloc(notes_sz);
+	return vzalloc(size);
 #endif
 }
 
@@ -665,7 +670,7 @@ static int __init merge_note_headers_elf64(char *elfptr, size_t *elfsz,
 		return rc;
 
 	*notes_sz = roundup(phdr_sz, PAGE_SIZE);
-	*notes_buf = alloc_elfnotes_buf(*notes_sz);
+	*notes_buf = vmcore_alloc_buf(*notes_sz);
 	if (!*notes_buf)
 		return -ENOMEM;
 
@@ -851,7 +856,7 @@ static int __init merge_note_headers_elf32(char *elfptr, size_t *elfsz,
 		return rc;
 
 	*notes_sz = roundup(phdr_sz, PAGE_SIZE);
-	*notes_buf = alloc_elfnotes_buf(*notes_sz);
+	*notes_buf = vmcore_alloc_buf(*notes_sz);
 	if (!*notes_buf)
 		return -ENOMEM;
 
@@ -1145,6 +1150,136 @@ static int __init parse_crash_elf_headers(void)
 	return 0;
 }
 
+#ifdef CONFIG_PROC_VMCORE_DEVICE_DUMP
+/**
+ * vmcoredd_get_note_size - Get size of the note that will be inserted at
+ * beginning of the dump's buffer.
+ * @name: Note's name
+ *
+ * Gets the overall size of the note that will be inserted at the beginning
+ * of the dump's buffer.  It also adds padding, if necessary to meet
+ * alignment requirements.
+ */
+static inline size_t vmcoredd_get_note_size(const char *name)
+{
+	return CRASH_CORE_NOTE_HEAD_BYTES +
+	       ALIGN(VMCOREDD_NOTE_NAME_BYTES + strlen(name), sizeof(Elf_Word));
+}
+
+/**
+ * vmcoredd_write_note - Write note at the beginning of the dump's buffer
+ * @name: Dump's name
+ * @buf: Output buffer where the note is written
+ * @size: Size of the dump
+ *
+ * Fills beginning of the dump's data with elf note.
+ */
+static void vmcoredd_write_note(const char *name, void *buf, size_t size)
+{
+	struct elf_note *note = (struct elf_note *)buf;
+	Elf_Word *word = (Elf_Word *)note;
+
+	note->n_namesz = ALIGN(VMCOREDD_NOTE_NAME_BYTES + strlen(name),
+			       sizeof(Elf_Word));
+	note->n_descsz = size;
+	note->n_type = NT_VMCOREDD;
+	word += DIV_ROUND_UP(sizeof(*note), sizeof(Elf_Word));
+	snprintf((char *)word, note->n_namesz, "%s_%s", VMCOREDD_NOTE_NAME,
+		 name);
+}
+
+/**
+ * vmcore_add_device_dump - Add a buffer containing device dump to vmcore
+ * @data: dump info.
+ *
+ * Allocate a buffer and invoke the calling driver's dump collect routine.
+ * Write Elf note at the beginning of the buffer to indicate vmcore device
+ * dump and add the dump to global list.
+ */
+int __vmcore_add_device_dump(struct vmcoredd_data *data)
+{
+	size_t note_size, data_size;
+	struct vmcoredd_node *dump;
+	void *buf = NULL;
+	int ret;
+
+	if (!data || !strlen(data->name) ||
+	    !data->vmcoredd_callback || !data->size)
+		return -EINVAL;
+
+	dump = vzalloc(sizeof(*dump));
+	if (!dump) {
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	note_size = vmcoredd_get_note_size(data->name);
+	/* Keep size of the buffer page aligned so that it can be mmaped */
+	data_size = roundup(note_size + data->size, PAGE_SIZE);
+
+	/* Allocate buffer for driver's to write their dumps */
+	buf = vmcore_alloc_buf(data_size);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	vmcoredd_write_note(data->name, buf, data_size - note_size);
+
+	/* Invoke the driver's dump collection routing */
+	ret = data->vmcoredd_callback(data, buf + note_size);
+	if (ret)
+		goto out_err;
+
+	dump->buf = buf;
+	dump->size = data_size;
+
+	/* Add the dump to driver sysfs list */
+	mutex_lock(&vmcoredd_mutex);
+	list_add_tail(&dump->list, &vmcoredd_list);
+	mutex_unlock(&vmcoredd_mutex);
+
+	return 0;
+
+out_err:
+	if (buf)
+		vfree(buf);
+
+	if (dump)
+		vfree(dump);
+
+	return ret;
+}
+#endif /* CONFIG_PROC_VMCORE_DEVICE_DUMP */
+
+int vmcore_add_device_dump(struct vmcoredd_data *data)
+{
+#ifdef CONFIG_PROC_VMCORE_DEVICE_DUMP
+	return __vmcore_add_device_dump(data);
+#else
+	return -EOPNOTSUPP;
+#endif /* CONFIG_PROC_VMCORE_DEVICE_DUMP */
+}
+EXPORT_SYMBOL(vmcore_add_device_dump);
+
+/* Free all dumps in vmcore device dump list */
+static void vmcore_free_device_dumps(void)
+{
+#ifdef CONFIG_PROC_VMCORE_DEVICE_DUMP
+	mutex_lock(&vmcoredd_mutex);
+	while (!list_empty(&vmcoredd_list)) {
+		struct vmcoredd_node *dump;
+
+		dump = list_first_entry(&vmcoredd_list, struct vmcoredd_node,
+					list);
+		list_del(&dump->list);
+		vfree(dump->buf);
+		vfree(dump);
+	}
+	mutex_unlock(&vmcoredd_mutex);
+#endif /* CONFIG_PROC_VMCORE_DEVICE_DUMP */
+}
+
 /* Init function for vmcore module. */
 static int __init vmcore_init(void)
 {
@@ -1192,4 +1327,7 @@ void vmcore_cleanup(void)
 		kfree(m);
 	}
 	free_elfcorebuf();
+
+	/* clear vmcore device dump list */
+	vmcore_free_device_dumps();
 }
diff --git a/include/linux/crash_core.h b/include/linux/crash_core.h
index b511f6d24b42..3b6b041d84c8 100644
--- a/include/linux/crash_core.h
+++ b/include/linux/crash_core.h
@@ -27,6 +27,10 @@
 				     VMCOREINFO_NOTE_NAME_BYTES +	\
 				     VMCOREINFO_BYTES)
 
+#define VMCOREDD_MAX_NAME_BYTES  32
+#define VMCOREDD_NOTE_NAME	 "VMCOREDD"
+#define VMCOREDD_NOTE_NAME_BYTES sizeof(VMCOREDD_NOTE_NAME)
+
 typedef u32 note_buf_t[CRASH_CORE_NOTE_BYTES/4];
 
 void crash_update_vmcoreinfo_safecopy(void *ptr);
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index f7ac2aa93269..4e617da654a3 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -93,4 +93,14 @@ static inline bool is_kdump_kernel(void) { return 0; }
 #endif /* CONFIG_CRASH_DUMP */
 
 extern unsigned long saved_max_pfn;
+
+/* Device Dump information to be filled by drivers */
+struct vmcoredd_data {
+	char name[VMCOREDD_MAX_NAME_BYTES]; /* Unique name of the dump */
+	unsigned long size;                 /* Size of the dump */
+	/* Driver's registered callback to be invoked to collect dump */
+	int (*vmcoredd_callback)(struct vmcoredd_data *data, void *buf);
+};
+
+int vmcore_add_device_dump(struct vmcoredd_data *data);
 #endif /* LINUX_CRASHDUMP_H */
diff --git a/include/linux/kcore.h b/include/linux/kcore.h
index 80db19d3a505..aa26e7199060 100644
--- a/include/linux/kcore.h
+++ b/include/linux/kcore.h
@@ -28,6 +28,12 @@ struct vmcore {
 	loff_t offset;
 };
 
+struct vmcoredd_node {
+	struct list_head list;	/* List of dumps */
+	void *buf;		/* Buffer containing device's dump */
+	unsigned long size;	/* Size of the buffer */
+};
+
 #ifdef CONFIG_PROC_KCORE
 extern void kclist_add(struct kcore_list *, void *, size_t, int type);
 #else
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index 3bf73fb58045..05015d29ad8e 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -424,6 +424,7 @@ typedef struct elf64_shdr {
 #define NT_METAG_RPIPE	0x501		/* Metag read pipeline state */
 #define NT_METAG_TLS	0x502		/* Metag TLS pointer */
 #define NT_ARC_V2	0x600		/* ARCv2 accumulator/extra registers */
+#define NT_VMCOREDD	0x700		/* Vmcore Device Dump Note */
 
 /* Note header in a PT_NOTE section */
 typedef struct elf32_note {
-- 
2.14.1

[PATCH net-next v3 2/3] vmcore: append device dumps to vmcore as elf notes

[Rahul Lakkireddy]

Update read and mmap logic to append device dumps as additional notes
before the other elf notes. We add device dumps before other elf notes
because the other elf notes may not fill the elf notes buffer
completely and we will end up with zero-filled data between the elf
notes and the device dumps. Tools will then try to decode this
zero-filled data as valid notes and we don't want that. Hence, adding
device dumps before the other elf notes ensure that zero-filled data
can be avoided. This also ensures that the device dumps and the
other elf notes can be properly mmaped at page aligned address.

Incorporate device dump size into the total vmcore size. Also update
offsets for other program headers after the device dumps are added.

Suggested-by: Eric Biederman <ebiederm@xmission.com>.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
---
v3:
- Patch added in this version.
- Exported dumps as elf notes. Suggested by Eric Biederman
  <ebiederm@xmission.com>.

 fs/proc/vmcore.c | 247 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 243 insertions(+), 4 deletions(-)

diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index b53698f22362..487daef805f3 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -39,6 +39,8 @@ static size_t elfcorebuf_sz_orig;
 
 static char *elfnotes_buf;
 static size_t elfnotes_sz;
+/* Size of all notes minus the device dump notes */
+static size_t elfnotes_orig_sz;
 
 /* Total size of vmcore file. */
 static u64 vmcore_size;
@@ -51,6 +53,9 @@ static LIST_HEAD(vmcoredd_list);
 static DEFINE_MUTEX(vmcoredd_mutex);
 #endif /* CONFIG_PROC_VMCORE_DEVICE_DUMP */
 
+/* Device Dump Size */
+static size_t vmcoredd_orig_sz;
+
 /*
  * Returns > 0 for RAM pages, 0 for non-RAM pages, < 0 on error
  * The called function has to take care of module refcounting.
@@ -185,6 +190,77 @@ static int copy_to(void *target, void *src, size_t size, int userbuf)
 	return 0;
 }
 
+#ifdef CONFIG_PROC_VMCORE_DEVICE_DUMP
+static int vmcoredd_copy_dumps(void *dst, u64 start, size_t size, int userbuf)
+{
+	struct vmcoredd_node *dump;
+	u64 offset = 0;
+	int ret = 0;
+	size_t tsz;
+	char *buf;
+
+	mutex_lock(&vmcoredd_mutex);
+	list_for_each_entry(dump, &vmcoredd_list, list) {
+		if (start < offset + dump->size) {
+			tsz = min(offset + (u64)dump->size - start, (u64)size);
+			buf = dump->buf + start - offset;
+			if (copy_to(dst, buf, tsz, userbuf)) {
+				ret = -EFAULT;
+				goto out_unlock;
+			}
+
+			size -= tsz;
+			start += tsz;
+			dst += tsz;
+
+			/* Leave now if buffer filled already */
+			if (!size)
+				goto out_unlock;
+		}
+		offset += dump->size;
+	}
+
+out_unlock:
+	mutex_unlock(&vmcoredd_mutex);
+	return ret;
+}
+
+static int vmcoredd_mmap_dumps(struct vm_area_struct *vma, unsigned long dst,
+			       u64 start, size_t size)
+{
+	struct vmcoredd_node *dump;
+	u64 offset = 0;
+	int ret = 0;
+	size_t tsz;
+	char *buf;
+
+	mutex_lock(&vmcoredd_mutex);
+	list_for_each_entry(dump, &vmcoredd_list, list) {
+		if (start < offset + dump->size) {
+			tsz = min(offset + (u64)dump->size - start, (u64)size);
+			buf = dump->buf + start - offset;
+			if (remap_vmalloc_range_partial(vma, dst, buf, tsz)) {
+				ret = -EFAULT;
+				goto out_unlock;
+			}
+
+			size -= tsz;
+			start += tsz;
+			dst += tsz;
+
+			/* Leave now if buffer filled already */
+			if (!size)
+				goto out_unlock;
+		}
+		offset += dump->size;
+	}
+
+out_unlock:
+	mutex_unlock(&vmcoredd_mutex);
+	return ret;
+}
+#endif /* CONFIG_PROC_VMCORE_DEVICE_DUMP */
+
 /* Read from the ELF header and then the crash dump. On error, negative value is
  * returned otherwise number of bytes read are returned.
  */
@@ -222,10 +298,41 @@ static ssize_t __read_vmcore(char *buffer, size_t buflen, loff_t *fpos,
 	if (*fpos < elfcorebuf_sz + elfnotes_sz) {
 		void *kaddr;
 
+		/* We add device dumps before other elf notes because the
+		 * other elf notes may not fill the elf notes buffer
+		 * completely and we will end up with zero-filled data
+		 * between the elf notes and the device dumps. Tools will
+		 * then try to decode this zero-filled data as valid notes
+		 * and we don't want that. Hence, adding device dumps before
+		 * the other elf notes ensure that zero-filled data can be
+		 * avoided.
+		 */
+#ifdef CONFIG_PROC_VMCORE_DEVICE_DUMP
+		/* Read device dumps */
+		if (*fpos < elfcorebuf_sz + vmcoredd_orig_sz) {
+			tsz = min(elfcorebuf_sz + vmcoredd_orig_sz -
+				  (size_t)*fpos, buflen);
+			start = *fpos - elfcorebuf_sz;
+			if (vmcoredd_copy_dumps(buffer, start, tsz, userbuf))
+				return -EFAULT;
+
+			buflen -= tsz;
+			*fpos += tsz;
+			buffer += tsz;
+			acc += tsz;
+
+			/* leave now if filled buffer already */
+			if (!buflen)
+				return acc;
+		}
+#endif /* CONFIG_PROC_VMCORE_DEVICE_DUMP */
+
+		/* Read remaining elf notes */
 		tsz = min(elfcorebuf_sz + elfnotes_sz - (size_t)*fpos, buflen);
-		kaddr = elfnotes_buf + *fpos - elfcorebuf_sz;
+		kaddr = elfnotes_buf + *fpos - elfcorebuf_sz - vmcoredd_orig_sz;
 		if (copy_to(buffer, kaddr, tsz, userbuf))
 			return -EFAULT;
+
 		buflen -= tsz;
 		*fpos += tsz;
 		buffer += tsz;
@@ -451,11 +558,46 @@ static int mmap_vmcore(struct file *file, struct vm_area_struct *vma)
 	if (start < elfcorebuf_sz + elfnotes_sz) {
 		void *kaddr;
 
+		/* We add device dumps before other elf notes because the
+		 * other elf notes may not fill the elf notes buffer
+		 * completely and we will end up with zero-filled data
+		 * between the elf notes and the device dumps. Tools will
+		 * then try to decode this zero-filled data as valid notes
+		 * and we don't want that. Hence, adding device dumps before
+		 * the other elf notes ensure that zero-filled data can be
+		 * avoided. This also ensures that the device dumps and
+		 * other elf notes can be properly mmaped at page aligned
+		 * address.
+		 */
+#ifdef CONFIG_PROC_VMCORE_DEVICE_DUMP
+		/* Read device dumps */
+		if (start < elfcorebuf_sz + vmcoredd_orig_sz) {
+			u64 start_off;
+
+			tsz = min(elfcorebuf_sz + vmcoredd_orig_sz -
+				  (size_t)start, size);
+			start_off = start - elfcorebuf_sz;
+			if (vmcoredd_mmap_dumps(vma, vma->vm_start + len,
+						start_off, tsz))
+				goto fail;
+
+			size -= tsz;
+			start += tsz;
+			len += tsz;
+
+			/* leave now if filled buffer already */
+			if (!size)
+				return 0;
+		}
+#endif /* CONFIG_PROC_VMCORE_DEVICE_DUMP */
+
+		/* Read remaining elf notes */
 		tsz = min(elfcorebuf_sz + elfnotes_sz - (size_t)start, size);
-		kaddr = elfnotes_buf + start - elfcorebuf_sz;
+		kaddr = elfnotes_buf + start - elfcorebuf_sz - vmcoredd_orig_sz;
 		if (remap_vmalloc_range_partial(vma, vma->vm_start + len,
 						kaddr, tsz))
 			goto fail;
+
 		size -= tsz;
 		start += tsz;
 		len += tsz;
@@ -703,6 +845,11 @@ static int __init merge_note_headers_elf64(char *elfptr, size_t *elfsz,
 	/* Modify e_phnum to reflect merged headers. */
 	ehdr_ptr->e_phnum = ehdr_ptr->e_phnum - nr_ptnote + 1;
 
+	/* Store the size of all notes.  We need this to update the note
+	 * header when the device dumps will be added.
+	 */
+	elfnotes_orig_sz = phdr.p_memsz;
+
 	return 0;
 }
 
@@ -889,6 +1036,11 @@ static int __init merge_note_headers_elf32(char *elfptr, size_t *elfsz,
 	/* Modify e_phnum to reflect merged headers. */
 	ehdr_ptr->e_phnum = ehdr_ptr->e_phnum - nr_ptnote + 1;
 
+	/* Store the size of all notes.  We need this to update the note
+	 * header when the device dumps will be added.
+	 */
+	elfnotes_orig_sz = phdr.p_memsz;
+
 	return 0;
 }
 
@@ -981,8 +1133,8 @@ static int __init process_ptload_program_headers_elf32(char *elfptr,
 }
 
 /* Sets offset fields of vmcore elements. */
-static void __init set_vmcore_list_offsets(size_t elfsz, size_t elfnotes_sz,
-					   struct list_head *vc_list)
+static void set_vmcore_list_offsets(size_t elfsz, size_t elfnotes_sz,
+				    struct list_head *vc_list)
 {
 	loff_t vmcore_off;
 	struct vmcore *m;
@@ -1188,6 +1340,92 @@ static void vmcoredd_write_note(const char *name, void *buf, size_t size)
 		 name);
 }
 
+/**
+ * vmcoredd_update_program_headers - Update all Elf program headers
+ * @elfptr: Pointer to elf header
+ * @elfnotesz: Size of elf notes aligned to page size
+ * @vmcoreddsz: Size of device dumps to be added to elf note header
+ *
+ * Determine type of Elf header (Elf64 or Elf32) and update the elf note size.
+ * Also update the offsets of all the program headers after the elf note header.
+ */
+static void vmcoredd_update_program_headers(char *elfptr, size_t elfnotesz,
+					    size_t vmcoreddsz)
+{
+	unsigned char *e_ident = (unsigned char *)elfptr;
+	u64 start, end, size;
+	loff_t vmcore_off;
+	u32 i;
+
+	vmcore_off = elfcorebuf_sz + elfnotesz;
+
+	if (e_ident[EI_CLASS] == ELFCLASS64) {
+		Elf64_Ehdr *ehdr = (Elf64_Ehdr *)elfptr;
+		Elf64_Phdr *phdr = (Elf64_Phdr *)(elfptr + sizeof(Elf64_Ehdr));
+
+		/* Update all program headers */
+		for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
+			if (phdr->p_type == PT_NOTE) {
+				/* Update note size */
+				phdr->p_memsz = elfnotes_orig_sz + vmcoreddsz;
+				phdr->p_filesz = phdr->p_memsz;
+				continue;
+			}
+
+			start = rounddown(phdr->p_offset, PAGE_SIZE);
+			end = roundup(phdr->p_offset + phdr->p_memsz,
+				      PAGE_SIZE);
+			size = end - start;
+			phdr->p_offset = vmcore_off + (phdr->p_offset - start);
+			vmcore_off += size;
+		}
+	} else {
+		Elf32_Ehdr *ehdr = (Elf32_Ehdr *)elfptr;
+		Elf32_Phdr *phdr = (Elf32_Phdr *)(elfptr + sizeof(Elf32_Ehdr));
+
+		/* Update all program headers */
+		for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
+			if (phdr->p_type == PT_NOTE) {
+				/* Update note size */
+				phdr->p_memsz = elfnotes_orig_sz + vmcoreddsz;
+				phdr->p_filesz = phdr->p_memsz;
+				continue;
+			}
+
+			start = rounddown(phdr->p_offset, PAGE_SIZE);
+			end = roundup(phdr->p_offset + phdr->p_memsz,
+				      PAGE_SIZE);
+			size = end - start;
+			phdr->p_offset = vmcore_off + (phdr->p_offset - start);
+			vmcore_off += size;
+		}
+	}
+}
+
+/**
+ * vmcoredd_update_size - Update the total size of the device dumps and update
+ * Elf header
+ * @dump_size: Size of the current device dump to be added to total size
+ *
+ * Update the total size of all the device dumps and update the Elf program
+ * headers. Calculate the new offsets for the vmcore list and update the
+ * total vmcore size.
+ */
+static void vmcoredd_update_size(size_t dump_size)
+{
+	vmcoredd_orig_sz += dump_size;
+	elfnotes_sz = roundup(elfnotes_orig_sz, PAGE_SIZE) + vmcoredd_orig_sz;
+	vmcoredd_update_program_headers(elfcorebuf, elfnotes_sz,
+					vmcoredd_orig_sz);
+
+	/* Update vmcore list offsets */
+	set_vmcore_list_offsets(elfcorebuf_sz, elfnotes_sz, &vmcore_list);
+
+	vmcore_size = get_vmcore_size(elfcorebuf_sz, elfnotes_sz,
+				      &vmcore_list);
+	proc_vmcore->size = vmcore_size;
+}
+
 /**
  * vmcore_add_device_dump - Add a buffer containing device dump to vmcore
  * @data: dump info.
@@ -1239,6 +1477,7 @@ int __vmcore_add_device_dump(struct vmcoredd_data *data)
 	list_add_tail(&dump->list, &vmcoredd_list);
 	mutex_unlock(&vmcoredd_mutex);
 
+	vmcoredd_update_size(data_size);
 	return 0;
 
 out_err:
-- 
2.14.1

[PATCH net-next v3 3/3] cxgb4: collect hardware dump in second kernel

[Rahul Lakkireddy]

Register callback to collect hardware/firmware dumps in second kernel
before hardware/firmware is initialized. The dumps for each device
will be available as elf notes in /proc/vmcore in second kernel.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
---
v3:
- Replaced all crashdd* with vmcoredd*.
- Replaced crashdd_add_dump() with vmcore_add_device_dump().
- Updated comments and commit message.

v2:
- No Changes.

Changes since rfc v2:
- Update comments and commit message for sysfs change.

rfc v2:
- Updated dump registration to the new API in patch 1.

 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h       |  4 ++++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c | 25 ++++++++++++++++++++++++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.h |  3 +++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c  | 10 ++++++++++
 4 files changed, 42 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 688f95440af2..01e7aad4ce5b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -50,6 +50,7 @@
 #include <linux/net_tstamp.h>
 #include <linux/ptp_clock_kernel.h>
 #include <linux/ptp_classify.h>
+#include <linux/crash_dump.h>
 #include <asm/io.h>
 #include "t4_chip_type.h"
 #include "cxgb4_uld.h"
@@ -964,6 +965,9 @@ struct adapter {
 	struct hma_data hma;
 
 	struct srq_data *srq;
+
+	/* Dump buffer for collecting logs in kdump kernel */
+	struct vmcoredd_data vmcoredd;
 };
 
 /* Support for "sched-class" command to allow a TX Scheduling Class to be
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c
index 143686c60234..76433d4fe483 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c
@@ -488,3 +488,28 @@ void cxgb4_init_ethtool_dump(struct adapter *adapter)
 	adapter->eth_dump.version = adapter->params.fw_vers;
 	adapter->eth_dump.len = 0;
 }
+
+static int cxgb4_cudbg_vmcoredd_collect(struct vmcoredd_data *data, void *buf)
+{
+	struct adapter *adap = container_of(data, struct adapter, vmcoredd);
+	u32 len = data->size;
+
+	return cxgb4_cudbg_collect(adap, buf, &len, CXGB4_ETH_DUMP_ALL);
+}
+
+int cxgb4_cudbg_vmcore_add_dump(struct adapter *adap)
+{
+	struct vmcoredd_data *data = &adap->vmcoredd;
+	u32 len;
+
+	len = sizeof(struct cudbg_hdr) +
+	      sizeof(struct cudbg_entity_hdr) * CUDBG_MAX_ENTITY;
+	len += CUDBG_DUMP_BUFF_SIZE;
+
+	data->size = len;
+	snprintf(data->name, sizeof(data->name), "%s_%s", cxgb4_driver_name,
+		 adap->name);
+	data->vmcoredd_callback = cxgb4_cudbg_vmcoredd_collect;
+
+	return vmcore_add_device_dump(data);
+}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.h
index ce1ac9a1c878..ef59ba1ed968 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.h
@@ -41,8 +41,11 @@ enum CXGB4_ETHTOOL_DUMP_FLAGS {
 	CXGB4_ETH_DUMP_HW = (1 << 1), /* various FW and HW dumps */
 };
 
+#define CXGB4_ETH_DUMP_ALL (CXGB4_ETH_DUMP_MEM | CXGB4_ETH_DUMP_HW)
+
 u32 cxgb4_get_dump_length(struct adapter *adap, u32 flag);
 int cxgb4_cudbg_collect(struct adapter *adap, void *buf, u32 *buf_size,
 			u32 flag);
 void cxgb4_init_ethtool_dump(struct adapter *adapter);
+int cxgb4_cudbg_vmcore_add_dump(struct adapter *adap);
 #endif /* __CXGB4_CUDBG_H__ */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 0072580e2c25..040004db4a35 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5530,6 +5530,16 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto out_free_adapter;
 
+	if (is_kdump_kernel()) {
+		/* Collect hardware state and append to /proc/vmcore */
+		err = cxgb4_cudbg_vmcore_add_dump(adapter);
+		if (err) {
+			dev_warn(adapter->pdev_dev,
+				 "Fail collecting vmcore device dump, err: %d. Continuing\n",
+				 err);
+			err = 0;
+		}
+	}
 
 	if (!is_t4(adapter->params.chip)) {
 		s_qpp = (QUEUESPERPAGEPF0_S +
-- 
2.14.1

Re: [PATCH net-next v3 3/3] cxgb4: collect hardware dump in second kernel

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1550 bytes --]

Hi Rahul,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Rahul-Lakkireddy/kernel-add-support-to-collect-hardware-logs-in-crash-recovery-kernel/20180401-060904
config: sparc64-allyesconfig (attached as .config)
compiler: sparc64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=sparc64 

All errors (new ones prefixed by >>):

   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.o: In function `cxgb4_cudbg_vmcore_add_dump':
>> cxgb4_cudbg.c:(.text+0x9ec): undefined reference to `vmcore_add_device_dump'

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 53488 bytes --]

Re: [PATCH net-next v3 3/3] cxgb4: collect hardware dump in second kernel

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1958 bytes --]

Hi Rahul,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Rahul-Lakkireddy/kernel-add-support-to-collect-hardware-logs-in-crash-recovery-kernel/20180401-060904
config: tile-allyesconfig (attached as .config)
compiler: tilegx-linux-gcc (GCC) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=tile 

All errors (new ones prefixed by >>):

   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
   drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.o: In function `cxgb4_cudbg_vmcore_add_dump':
>> (.text+0xed0): undefined reference to `vmcore_add_device_dump'
   drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_init_stream_cap.isra.1':
   mac80211.c:(.text+0x8a8): undefined reference to `__sw_hweight8'

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 51825 bytes --]

Re: [PATCH net-next v3 1/3] vmcore: add API to collect hardware dump in second kernel

[kbuild test robot]

Hi Rahul,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Rahul-Lakkireddy/kernel-add-support-to-collect-hardware-logs-in-crash-recovery-kernel/20180401-060904
reproduce:
        # apt-get install sparse
        make ARCH=x86_64 allmodconfig
        make C=1 CF=-D__CHECK_ENDIAN__


sparse warnings: (new ones prefixed by >>)

>> fs/proc/vmcore.c:1199:5: sparse: symbol '__vmcore_add_device_dump' was not declared. Should it be static?

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[RFC PATCH] vmcore: __vmcore_add_device_dump() can be static

[kbuild test robot]

Fixes: 6bf7e2b7f850 ("vmcore: add API to collect hardware dump in second kernel")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---
 vmcore.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index b53698f..fe788dd 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -1196,7 +1196,7 @@ static void vmcoredd_write_note(const char *name, void *buf, size_t size)
  * Write Elf note at the beginning of the buffer to indicate vmcore device
  * dump and add the dump to global list.
  */
-int __vmcore_add_device_dump(struct vmcoredd_data *data)
+static int __vmcore_add_device_dump(struct vmcoredd_data *data)
 {
 	size_t note_size, data_size;
 	struct vmcoredd_node *dump;