From: Andreas Gruenbacher <agruenba@redhat.com>
To: cluster-devel@redhat.com, Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org, Andreas Gruenbacher <agruenba@redhat.com>
Subject: [PATCH v4 03/11] gfs2: gfs2_stuffed_write_end cleanup
Date: Mon, 14 May 2018 17:36:16 +0200 [thread overview]
Message-ID: <20180514153624.29598-4-agruenba@redhat.com> (raw)
In-Reply-To: <20180514153624.29598-1-agruenba@redhat.com>
First, change the sanity check in gfs2_stuffed_write_end to check for
the actual write size instead of the requested write size.
Second, use the existing teardown code in gfs2_write_end instead of
duplicating it in gfs2_stuffed_write_end.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
---
fs/gfs2/aops.c | 49 ++++++++++++++++++-------------------------------
1 file changed, 18 insertions(+), 31 deletions(-)
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index f58716567972..e8c0387652ed 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -814,7 +814,6 @@ static void adjust_fs_space(struct inode *inode)
* @inode: The inode
* @dibh: The buffer_head containing the on-disk inode
* @pos: The file position
- * @len: The length of the write
* @copied: How much was actually copied by the VFS
* @page: The page
*
@@ -824,17 +823,15 @@ static void adjust_fs_space(struct inode *inode)
* Returns: errno
*/
static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
- loff_t pos, unsigned len, unsigned copied,
+ loff_t pos, unsigned copied,
struct page *page)
{
struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_sbd *sdp = GFS2_SB(inode);
- struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
u64 to = pos + copied;
void *kaddr;
unsigned char *buf = dibh->b_data + sizeof(struct gfs2_dinode);
- BUG_ON(pos + len > gfs2_max_stuffed_size(ip));
+ BUG_ON(pos + copied > gfs2_max_stuffed_size(ip));
kaddr = kmap_atomic(page);
memcpy(buf + pos, kaddr + pos, copied);
@@ -850,20 +847,6 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
i_size_write(inode, to);
mark_inode_dirty(inode);
}
-
- if (inode == sdp->sd_rindex) {
- adjust_fs_space(inode);
- sdp->sd_rindex_uptodate = 0;
- }
-
- brelse(dibh);
- gfs2_trans_end(sdp);
- if (inode == sdp->sd_rindex) {
- gfs2_glock_dq(&m_ip->i_gh);
- gfs2_holder_uninit(&m_ip->i_gh);
- }
- gfs2_glock_dq(&ip->i_gh);
- gfs2_holder_uninit(&ip->i_gh);
return copied;
}
@@ -877,9 +860,8 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
* @page: The page that has been written
* @fsdata: The fsdata (unused in GFS2)
*
- * The main write_end function for GFS2. We have a separate one for
- * stuffed files as they are slightly different, otherwise we just
- * put our locking around the VFS provided functions.
+ * The main write_end function for GFS2. We just put our locking around the VFS
+ * provided functions.
*
* Returns: errno
*/
@@ -900,32 +882,37 @@ static int gfs2_write_end(struct file *file, struct address_space *mapping,
BUG_ON(gfs2_glock_is_locked_by_me(ip->i_gl) == NULL);
ret = gfs2_meta_inode_buffer(ip, &dibh);
- if (unlikely(ret)) {
- unlock_page(page);
- put_page(page);
- goto failed;
- }
+ if (unlikely(ret))
+ goto out;
- if (gfs2_is_stuffed(ip))
- return gfs2_stuffed_write_end(inode, dibh, pos, len, copied, page);
+ if (gfs2_is_stuffed(ip)) {
+ ret = gfs2_stuffed_write_end(inode, dibh, pos, copied, page);
+ page = NULL;
+ goto out2;
+ }
if (!gfs2_is_writeback(ip))
gfs2_page_add_databufs(ip, page, pos & ~PAGE_MASK, len);
ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
+ page = NULL;
if (tr->tr_num_buf_new)
__mark_inode_dirty(inode, I_DIRTY_DATASYNC);
else
gfs2_trans_add_meta(ip->i_gl, dibh);
-
+out2:
if (inode == sdp->sd_rindex) {
adjust_fs_space(inode);
sdp->sd_rindex_uptodate = 0;
}
brelse(dibh);
-failed:
+out:
+ if (page) {
+ unlock_page(page);
+ put_page(page);
+ }
gfs2_trans_end(sdp);
gfs2_inplace_release(ip);
if (ip->i_qadata && ip->i_qadata->qa_qd_num)
--
2.17.0
next prev parent reply other threads:[~2018-05-14 15:36 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-14 15:36 [PATCH v4 00/11] gfs2 iomap write support Andreas Gruenbacher
2018-05-14 15:36 ` [PATCH v4 01/11] gfs2: Update find_metapath comment Andreas Gruenbacher
2018-05-14 15:36 ` [PATCH v4 02/11] gfs2: hole_size improvement Andreas Gruenbacher
2018-05-14 15:36 ` Andreas Gruenbacher [this message]
2018-05-14 15:36 ` [PATCH v4 04/11] gfs2: Remove ordered write mode handling from gfs2_trans_add_data Andreas Gruenbacher
2018-05-14 15:36 ` [PATCH v4 05/11] gfs2: Iomap cleanups and improvements Andreas Gruenbacher
2018-05-14 15:36 ` [PATCH v4 06/11] iomap: Add write_{begin,end} iomap operations Andreas Gruenbacher
2018-05-15 1:11 ` Dave Chinner
2018-05-15 7:22 ` Christoph Hellwig
2018-05-15 8:16 ` Andreas Gruenbacher
2018-05-18 16:04 ` Christoph Hellwig
2018-05-25 17:58 ` Andreas Grünbacher
2018-05-28 13:02 ` Christoph Hellwig
2018-05-14 15:36 ` [PATCH v4 07/11] gfs2: iomap buffered write support Andreas Gruenbacher
2018-05-14 15:36 ` [PATCH v4 08/11] gfs2: gfs2_extent_length cleanup Andreas Gruenbacher
2018-05-14 15:36 ` [PATCH v4 09/11] gfs2: iomap direct I/O support Andreas Gruenbacher
2018-05-15 7:31 ` Christoph Hellwig
2018-05-16 20:36 ` Andreas Gruenbacher
2018-05-14 15:36 ` [PATCH v4 10/11] gfs2: Remove gfs2_write_{begin,end} Andreas Gruenbacher
2018-05-14 15:36 ` [PATCH v4 11/11] iomap: Complete partial direct I/O writes synchronously Andreas Gruenbacher
2018-05-15 7:24 ` Christoph Hellwig
2018-05-16 20:27 ` Andreas Gruenbacher
2018-05-18 15:56 ` Christoph Hellwig
2018-05-18 18:35 ` Andreas Grünbacher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180514153624.29598-4-agruenba@redhat.com \
--to=agruenba@redhat.com \
--cc=cluster-devel@redhat.com \
--cc=hch@lst.de \
--cc=linux-fsdevel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).