linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Miklos Szeredi <mszeredi@redhat.com>
To: linux-unionfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 08/28] ovl: Use out_err instead of out_nomem
Date: Tue, 29 May 2018 16:45:52 +0200	[thread overview]
Message-ID: <20180529144612.16675-9-mszeredi@redhat.com> (raw)
In-Reply-To: <20180529144612.16675-1-mszeredi@redhat.com>

From: Vivek Goyal <vgoyal@redhat.com>

Right now we use goto out_nomem which assumes error code is -ENOMEM.  But
there are other errors returned like -ESTALE as well.  So instead of
out_nomem, use out_err which will do ERR_PTR(err).  That way one can put
error code in err and jump to out_err.

This just code reorganization and no change of functionality.

I am about to add more code and this organization helps laying more code
and error paths on top of it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
---
 fs/overlayfs/inode.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index 60c88a09a3f3..0d5615b80422 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -782,6 +782,7 @@ struct inode *ovl_get_inode(struct super_block *sb,
 	int fsid = bylower ? oip->lowerpath->layer->fsid : 0;
 	bool is_dir;
 	unsigned long ino = 0;
+	int err = -ENOMEM;
 
 	if (!realinode)
 		realinode = d_inode(lowerdentry);
@@ -798,7 +799,7 @@ struct inode *ovl_get_inode(struct super_block *sb,
 
 		inode = ovl_iget5(sb, oip->newinode, key);
 		if (!inode)
-			goto out_nomem;
+			goto out_err;
 		if (!(inode->i_state & I_NEW)) {
 			/*
 			 * Verify that the underlying files stored in the inode
@@ -807,8 +808,8 @@ struct inode *ovl_get_inode(struct super_block *sb,
 			if (!ovl_verify_inode(inode, lowerdentry, upperdentry,
 					      true)) {
 				iput(inode);
-				inode = ERR_PTR(-ESTALE);
-				goto out;
+				err = -ESTALE;
+				goto out_err;
 			}
 
 			dput(upperdentry);
@@ -824,8 +825,10 @@ struct inode *ovl_get_inode(struct super_block *sb,
 	} else {
 		/* Lower hardlink that will be broken on copy up */
 		inode = new_inode(sb);
-		if (!inode)
-			goto out_nomem;
+		if (!inode) {
+			err = -ENOMEM;
+			goto out_err;
+		}
 	}
 	ovl_fill_inode(inode, realinode->i_mode, realinode->i_rdev, ino, fsid);
 	ovl_inode_init(inode, upperdentry, lowerdentry);
@@ -851,7 +854,7 @@ struct inode *ovl_get_inode(struct super_block *sb,
 out:
 	return inode;
 
-out_nomem:
-	inode = ERR_PTR(-ENOMEM);
+out_err:
+	inode = ERR_PTR(err);
 	goto out;
 }
-- 
2.14.3

  parent reply	other threads:[~2018-05-29 14:45 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-29 14:45 [PATCH 00/28] overlayfs: Delayed copy up of data Miklos Szeredi
2018-05-29 14:45 ` [PATCH 01/28] ovl: Initialize ovl_inode->redirect in ovl_get_inode() Miklos Szeredi
2018-05-29 14:45 ` [PATCH 02/28] ovl: Move the copy up helpers to copy_up.c Miklos Szeredi
2018-05-29 14:45 ` [PATCH 03/28] ovl: Provide a mount option metacopy=on/off for metadata copyup Miklos Szeredi
2018-05-29 20:44   ` Randy Dunlap
2018-05-30  8:27     ` Miklos Szeredi
2018-05-29 14:45 ` [PATCH 04/28] ovl: During copy up, first copy up metadata and then data Miklos Szeredi
2018-05-29 14:45 ` [PATCH 05/28] ovl: Copy up only metadata during copy up where it makes sense Miklos Szeredi
2018-05-29 14:45 ` [PATCH 06/28] ovl: Add helper ovl_already_copied_up() Miklos Szeredi
2018-05-29 14:45 ` [PATCH 07/28] ovl: A new xattr OVL_XATTR_METACOPY for file on upper Miklos Szeredi
2018-05-29 14:45 ` Miklos Szeredi [this message]
2018-05-29 14:45 ` [PATCH 09/28] ovl: Modify ovl_lookup() and friends to lookup metacopy dentry Miklos Szeredi
2018-05-29 14:45 ` [PATCH 10/28] ovl: Copy up meta inode data from lowest data inode Miklos Szeredi
2018-05-29 14:45 ` [PATCH 11/28] ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry Miklos Szeredi
2018-05-29 14:45 ` [PATCH 12/28] ovl: Fix ovl_getattr() to get number of blocks from lower Miklos Szeredi
2018-05-29 14:45 ` [PATCH 13/28] ovl: Store lower data inode in ovl_inode Miklos Szeredi
2018-05-29 14:45 ` [PATCH 14/28] ovl: Add helper ovl_inode_realdata() Miklos Szeredi
2018-05-29 14:45 ` [PATCH 15/28] ovl: Open file with data except for the case of fsync Miklos Szeredi
2018-05-30 14:30   ` Vivek Goyal
2018-05-30 15:12     ` Miklos Szeredi
2018-05-30 15:48       ` Vivek Goyal
2018-05-29 14:46 ` [PATCH 16/28] ovl: Do not expose metacopy only dentry from d_real() Miklos Szeredi
2018-05-30 21:05   ` Vivek Goyal
2018-05-31  4:30     ` Amir Goldstein
2018-05-29 14:46 ` [PATCH 17/28] ovl: Move some dir related ovl_lookup_single() code in else block Miklos Szeredi
2018-05-29 14:46 ` [PATCH 18/28] ovl: Check redirects for metacopy files Miklos Szeredi
2018-05-29 14:46 ` [PATCH 19/28] ovl: Treat metacopy dentries as type OVL_PATH_MERGE Miklos Szeredi
2018-05-29 14:46 ` [PATCH 20/28] ovl: Add an inode flag OVL_CONST_INO Miklos Szeredi
2018-05-29 14:46 ` [PATCH 21/28] ovl: Do not set dentry type ORIGIN for broken hardlinks Miklos Szeredi
2018-05-29 14:46 ` [PATCH 22/28] ovl: Set redirect on metacopy files upon rename Miklos Szeredi
2018-05-29 14:46 ` [PATCH 23/28] ovl: Set redirect on upper inode when it is linked Miklos Szeredi
2018-05-29 14:46 ` [PATCH 24/28] ovl: Check redirect on index as well Miklos Szeredi
2018-05-29 14:46 ` [PATCH 25/28] ovl: Disbale metacopy for MAP_SHARED mmap() Miklos Szeredi
2018-05-29 14:46 ` [PATCH 26/28] ovl: Do not do metadata only copy-up for truncate operation Miklos Szeredi
2018-05-29 14:46 ` [PATCH 27/28] ovl: Do not do metacopy only for ioctl modifying file attr Miklos Szeredi
2018-05-29 14:46 ` [PATCH 28/28] ovl: Enable metadata only feature Miklos Szeredi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180529144612.16675-9-mszeredi@redhat.com \
    --to=mszeredi@redhat.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-unionfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).