From: Vivek Goyal <vgoyal@redhat.com>
To: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, linux-nvdimm@lists.01.org
Cc: vgoyal@redhat.com, miklos@szeredi.hu, stefanha@redhat.com,
dgilbert@redhat.com, swhiteho@redhat.com
Subject: [PATCH v2 23/30] fuse: Define dax address space operations
Date: Wed, 15 May 2019 15:27:08 -0400 [thread overview]
Message-ID: <20190515192715.18000-24-vgoyal@redhat.com> (raw)
In-Reply-To: <20190515192715.18000-1-vgoyal@redhat.com>
This is done along the lines of ext4 and xfs. I primarily wanted ->writepages
hook at this time so that I could call into dax_writeback_mapping_range().
This in turn will decide which pfns need to be written back.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
---
fs/fuse/file.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index a053bcb9498d..2777355bc245 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2402,6 +2402,17 @@ static int fuse_writepages_fill(struct page *page,
return err;
}
+static int fuse_dax_writepages(struct address_space *mapping,
+ struct writeback_control *wbc)
+{
+
+ struct inode *inode = mapping->host;
+ struct fuse_conn *fc = get_fuse_conn(inode);
+
+ return dax_writeback_mapping_range(mapping,
+ NULL, fc->dax_dev, wbc);
+}
+
static int fuse_writepages(struct address_space *mapping,
struct writeback_control *wbc)
{
@@ -3707,6 +3718,13 @@ static const struct address_space_operations fuse_file_aops = {
.write_end = fuse_write_end,
};
+static const struct address_space_operations fuse_dax_file_aops = {
+ .writepages = fuse_dax_writepages,
+ .direct_IO = noop_direct_IO,
+ .set_page_dirty = noop_set_page_dirty,
+ .invalidatepage = noop_invalidatepage,
+};
+
void fuse_init_file_inode(struct inode *inode)
{
struct fuse_inode *fi = get_fuse_inode(inode);
@@ -3724,5 +3742,6 @@ void fuse_init_file_inode(struct inode *inode)
if (fc->dax_dev) {
inode->i_flags |= S_DAX;
+ inode->i_data.a_ops = &fuse_dax_file_aops;
}
}
--
2.20.1
next prev parent reply other threads:[~2019-05-15 19:30 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-15 19:26 [PATCH v2 00/30] [RFC] virtio-fs: shared file system for virtual machines Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 01/30] fuse: delete dentry if timeout is zero Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 02/30] fuse: Clear setuid bit even in cache=never path Vivek Goyal
2019-05-20 14:41 ` Miklos Szeredi
2019-05-20 14:44 ` Miklos Szeredi
2019-05-20 20:25 ` Nikolaus Rath
2019-05-21 15:01 ` Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 03/30] fuse: Use default_file_splice_read for direct IO Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 04/30] fuse: export fuse_end_request() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 05/30] fuse: export fuse_len_args() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 06/30] fuse: Export fuse_send_init_request() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 07/30] fuse: export fuse_get_unique() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 08/30] fuse: extract fuse_fill_super_common() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 09/30] fuse: add fuse_iqueue_ops callbacks Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 10/30] fuse: Separate fuse device allocation and installation in fuse_conn Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 11/30] virtio_fs: add skeleton virtio_fs.ko module Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 12/30] dax: remove block device dependencies Vivek Goyal
2019-05-16 0:21 ` Dan Williams
2019-05-16 10:07 ` Stefan Hajnoczi
2019-05-16 14:23 ` Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 13/30] dax: Pass dax_dev to dax_writeback_mapping_range() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 14/30] virtio: Add get_shm_region method Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 15/30] virtio: Implement get_shm_region for PCI transport Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 16/30] virtio: Implement get_shm_region for MMIO transport Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 17/30] fuse, dax: add fuse_conn->dax_dev field Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 18/30] virtio_fs, dax: Set up virtio_fs dax_device Vivek Goyal
2019-07-17 17:27 ` Halil Pasic
2019-07-18 9:04 ` Cornelia Huck
2019-07-18 11:20 ` Halil Pasic
2019-07-18 14:47 ` Cornelia Huck
2019-07-18 13:15 ` Vivek Goyal
2019-07-18 14:30 ` Dan Williams
2019-07-22 10:51 ` Christian Borntraeger
2019-07-22 10:56 ` Dr. David Alan Gilbert
2019-07-22 11:20 ` Christian Borntraeger
2019-07-22 11:43 ` Cornelia Huck
2019-07-22 12:00 ` Christian Borntraeger
2019-07-22 12:08 ` David Hildenbrand
2019-07-29 13:20 ` Stefan Hajnoczi
2019-05-15 19:27 ` [PATCH v2 19/30] fuse: Keep a list of free dax memory ranges Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 20/30] fuse: Introduce setupmapping/removemapping commands Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 21/30] fuse, dax: Implement dax read/write operations Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 22/30] fuse, dax: add DAX mmap support Vivek Goyal
2019-05-15 19:27 ` Vivek Goyal [this message]
2019-05-15 19:27 ` [PATCH v2 24/30] fuse, dax: Take ->i_mmap_sem lock during dax page fault Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 25/30] fuse: Maintain a list of busy elements Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 26/30] fuse: Add logic to free up a memory range Vivek Goyal
[not found] ` <CAN+Pk99SNKSf+GjSQUUWt_eu1fSjTy_ByUOEQUXHi8zNqXY1zA@mail.gmail.com>
2019-05-20 12:53 ` Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 27/30] fuse: Release file in process context Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 28/30] fuse: Reschedule dax free work if too many EAGAIN attempts Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 29/30] fuse: Take inode lock for dax inode truncation Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 30/30] virtio-fs: Do not provide abort interface in fusectl Vivek Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190515192715.18000-24-vgoyal@redhat.com \
--to=vgoyal@redhat.com \
--cc=dgilbert@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=miklos@szeredi.hu \
--cc=stefanha@redhat.com \
--cc=swhiteho@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).