linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vivek Goyal <vgoyal@redhat.com>
To: linux-fsdevel@vger.kernel.org, linux-nvdimm@lists.01.org,
	hch@infradead.org, dan.j.williams@intel.com
Cc: dm-devel@redhat.com, vishal.l.verma@intel.com, vgoyal@redhat.com
Subject: [PATCH v4 1/7] pmem: Add functions for reading/writing page to/from pmem
Date: Mon, 17 Feb 2020 13:16:47 -0500	[thread overview]
Message-ID: <20200217181653.4706-2-vgoyal@redhat.com> (raw)
In-Reply-To: <20200217181653.4706-1-vgoyal@redhat.com>

This splits pmem_do_bvec() into pmem_do_read() and pmem_do_write().
pmem_do_write() will be used by pmem zero_page_range() as well. Hence
sharing the same code.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
---
 drivers/nvdimm/pmem.c | 86 +++++++++++++++++++++++++------------------
 1 file changed, 50 insertions(+), 36 deletions(-)

diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index 4eae441f86c9..075b11682192 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -136,9 +136,25 @@ static blk_status_t read_pmem(struct page *page, unsigned int off,
 	return BLK_STS_OK;
 }
 
-static blk_status_t pmem_do_bvec(struct pmem_device *pmem, struct page *page,
-			unsigned int len, unsigned int off, unsigned int op,
-			sector_t sector)
+static blk_status_t pmem_do_read(struct pmem_device *pmem,
+			struct page *page, unsigned int page_off,
+			sector_t sector, unsigned int len)
+{
+	blk_status_t rc;
+	phys_addr_t pmem_off = sector * 512 + pmem->data_offset;
+	void *pmem_addr = pmem->virt_addr + pmem_off;
+
+	if (unlikely(is_bad_pmem(&pmem->bb, sector, len)))
+		return BLK_STS_IOERR;
+
+	rc = read_pmem(page, page_off, pmem_addr, len);
+	flush_dcache_page(page);
+	return rc;
+}
+
+static blk_status_t pmem_do_write(struct pmem_device *pmem,
+			struct page *page, unsigned int page_off,
+			sector_t sector, unsigned int len)
 {
 	blk_status_t rc = BLK_STS_OK;
 	bool bad_pmem = false;
@@ -148,34 +164,25 @@ static blk_status_t pmem_do_bvec(struct pmem_device *pmem, struct page *page,
 	if (unlikely(is_bad_pmem(&pmem->bb, sector, len)))
 		bad_pmem = true;
 
-	if (!op_is_write(op)) {
-		if (unlikely(bad_pmem))
-			rc = BLK_STS_IOERR;
-		else {
-			rc = read_pmem(page, off, pmem_addr, len);
-			flush_dcache_page(page);
-		}
-	} else {
-		/*
-		 * Note that we write the data both before and after
-		 * clearing poison.  The write before clear poison
-		 * handles situations where the latest written data is
-		 * preserved and the clear poison operation simply marks
-		 * the address range as valid without changing the data.
-		 * In this case application software can assume that an
-		 * interrupted write will either return the new good
-		 * data or an error.
-		 *
-		 * However, if pmem_clear_poison() leaves the data in an
-		 * indeterminate state we need to perform the write
-		 * after clear poison.
-		 */
-		flush_dcache_page(page);
-		write_pmem(pmem_addr, page, off, len);
-		if (unlikely(bad_pmem)) {
-			rc = pmem_clear_poison(pmem, pmem_off, len);
-			write_pmem(pmem_addr, page, off, len);
-		}
+	/*
+	 * Note that we write the data both before and after
+	 * clearing poison.  The write before clear poison
+	 * handles situations where the latest written data is
+	 * preserved and the clear poison operation simply marks
+	 * the address range as valid without changing the data.
+	 * In this case application software can assume that an
+	 * interrupted write will either return the new good
+	 * data or an error.
+	 *
+	 * However, if pmem_clear_poison() leaves the data in an
+	 * indeterminate state we need to perform the write
+	 * after clear poison.
+	 */
+	flush_dcache_page(page);
+	write_pmem(pmem_addr, page, page_off, len);
+	if (unlikely(bad_pmem)) {
+		rc = pmem_clear_poison(pmem, pmem_off, len);
+		write_pmem(pmem_addr, page, page_off, len);
 	}
 
 	return rc;
@@ -197,8 +204,12 @@ static blk_qc_t pmem_make_request(struct request_queue *q, struct bio *bio)
 
 	do_acct = nd_iostat_start(bio, &start);
 	bio_for_each_segment(bvec, bio, iter) {
-		rc = pmem_do_bvec(pmem, bvec.bv_page, bvec.bv_len,
-				bvec.bv_offset, bio_op(bio), iter.bi_sector);
+		if (op_is_write(bio_op(bio)))
+			rc = pmem_do_write(pmem, bvec.bv_page, bvec.bv_offset,
+				iter.bi_sector, bvec.bv_len);
+		else
+			rc = pmem_do_read(pmem, bvec.bv_page, bvec.bv_offset,
+				iter.bi_sector, bvec.bv_len);
 		if (rc) {
 			bio->bi_status = rc;
 			break;
@@ -223,9 +234,12 @@ static int pmem_rw_page(struct block_device *bdev, sector_t sector,
 	struct pmem_device *pmem = bdev->bd_queue->queuedata;
 	blk_status_t rc;
 
-	rc = pmem_do_bvec(pmem, page, hpage_nr_pages(page) * PAGE_SIZE,
-			  0, op, sector);
-
+	if (op_is_write(op))
+		rc = pmem_do_write(pmem, page, 0, sector,
+				   hpage_nr_pages(page) * PAGE_SIZE);
+	else
+		rc = pmem_do_read(pmem, page, 0, sector,
+				   hpage_nr_pages(page) * PAGE_SIZE);
 	/*
 	 * The ->rw_page interface is subtle and tricky.  The core
 	 * retries on any error, so we can only invoke page_endio() in
-- 
2.20.1


  reply	other threads:[~2020-02-17 18:17 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-17 18:16 [PATCH v4 0/7] dax/pmem: Provide a dax operation to zero range of memory Vivek Goyal
2020-02-17 18:16 ` Vivek Goyal [this message]
2020-02-18 17:07   ` [dm-devel] [PATCH v4 1/7] pmem: Add functions for reading/writing page to/from pmem Christoph Hellwig
2020-02-17 18:16 ` [PATCH v4 2/7] pmem: Enable pmem_do_write() to deal with arbitrary ranges Vivek Goyal
2020-02-18 17:09   ` [dm-devel] " Christoph Hellwig
2020-02-18 21:10     ` Vivek Goyal
2020-02-17 18:16 ` [PATCH v4 3/7] dax, pmem: Add a dax operation zero_page_range Vivek Goyal
2020-02-18 17:10   ` [dm-devel] " Christoph Hellwig
2020-02-17 18:16 ` [PATCH v4 4/7] s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver Vivek Goyal
2020-02-17 18:16 ` [PATCH v4 5/7] dm,dax: Add dax zero_page_range operation Vivek Goyal
2020-02-17 18:16 ` [PATCH v4 6/7] dax,iomap: Start using dax native zero_page_range() Vivek Goyal
2020-02-17 18:16 ` [PATCH v4 7/7] dax,iomap: Add helper dax_iomap_zero() to zero a range Vivek Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200217181653.4706-2-vgoyal@redhat.com \
    --to=vgoyal@redhat.com \
    --cc=dan.j.williams@intel.com \
    --cc=dm-devel@redhat.com \
    --cc=hch@infradead.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).