[xfstests PATCH] generic: test reporting of wb errors via syncfs

[Jeff Layton <jlayton@kernel.org>]

From: Jeff Layton <jlayton@redhat.com>

Add a test for new syncfs error reporting behavior. When an inode fails
to be written back, ensure that a subsequent call to syncfs() will also
report an error.

Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
---
 tests/generic/999     | 79 +++++++++++++++++++++++++++++++++++++++++++
 tests/generic/999.out |  8 +++++
 tests/generic/group   |  1 +
 3 files changed, 88 insertions(+)
 create mode 100755 tests/generic/999
 create mode 100644 tests/generic/999.out

This patch is intended to test new behavior for syncfs that has recently
gone into linux-next and should make v5.8. See:

https://lore.kernel.org/linux-fsdevel/20200428135155.19223-1-jlayton@kernel.org/

diff --git a/tests/generic/999 b/tests/generic/999
new file mode 100755
index 000000000000..cdc0772d0774
--- /dev/null
+++ b/tests/generic/999
@@ -0,0 +1,79 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2020, Jeff Layton. All rights reserved.
+# FS QA Test No. 999
+#
+# Open a file and write to it and fsync. Then, flip the data device to throw
+# errors, write to it again and do an fdatasync. Then open an O_RDONLY fd on
+# the same file and call syncfs against it and ensure that an error is reported.
+# Then call syncfs again and ensure that no error is reported. Finally, repeat
+# the open and syncfs and ensure that there is no error reported.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+	_dmerror_cleanup
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmerror
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_nocheck
+# This test uses "dm" without taking into account the data could be on
+# realtime subvolume, thus the test will fail with rtinherit=1
+_require_no_rtinherit
+_require_dm_target error
+
+rm -f $seqres.full
+
+echo "Format and mount"
+_scratch_mkfs > $seqres.full 2>&1
+_dmerror_init
+_dmerror_mount
+
+
+# create file
+testfile=$SCRATCH_MNT/syncfs-reports-errors
+touch $testfile
+
+# write a page of data to file, and call fsync
+datalen=$(getconf PAGE_SIZE)
+$XFS_IO_PROG -c "pwrite -W -q 0 $datalen" $testfile
+
+# flip device to non-working mode
+_dmerror_load_error_table
+
+# rewrite the data and call fdatasync
+$XFS_IO_PROG -c "pwrite -w -q 0 $datalen" $testfile
+
+# heal the device error
+_dmerror_load_working_table
+
+# open again and call syncfs twice
+echo "One of the following syncfs calls should fail with EIO:"
+$XFS_IO_PROG -r -c syncfs -c syncfs $testfile
+echo "done"
+
+echo "This syncfs call should succeed:"
+$XFS_IO_PROG -r -c syncfs $testfile
+echo "done"
+
+# success, all done
+_dmerror_cleanup
+
+status=0
+exit
diff --git a/tests/generic/999.out b/tests/generic/999.out
new file mode 100644
index 000000000000..950a2ba42503
--- /dev/null
+++ b/tests/generic/999.out
@@ -0,0 +1,8 @@
+QA output created by 999
+Format and mount
+fdatasync: Input/output error
+One of the following syncfs calls should fail with EIO:
+syncfs: Input/output error
+done
+This syncfs call should succeed:
+done
diff --git a/tests/generic/group b/tests/generic/group
index 718575baeef9..9bcf296fc3dd 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -598,3 +598,4 @@
 594 auto quick quota
 595 auto quick encrypt
 596 auto quick
+999 auto quick
-- 
2.26.2